a collocation facility that can handle the high demands of video streaming, live and on-demand. I am current peeking 90 megs on live streams which usually last for a couple hours, the on demand is not that high it’s about 10 mbs average. I am located in Jacksonville FL not that it matters but the closer the better. Does anyone know of any good collocation facilities
View 14 RepliesAs stated in the subject. If you want to more specific, it will need to fast to Asean countries
View 13 Replies View RelatedI've been asked to look for a offsite ftp server solution as an alternative to having one inhouse attached to a 20-100mbps leased line. It will be used for storing ISO images of DVD's from client sites, must have a fast connection, reliable and full security.
View 6 Replies View RelatedI need a backup server
main tasks
- Download/Upload files from/to my other servers very fast.
- 1 GBps Port
- Storage no more 250 GB .
- 600 GB Traffic
- access the server from the IP no domain
- Cheaper always better : )
What offers / recommendation do you have for me?
a faster internet connection in our office here in San Diego, because we are going to run a few servers out of the office.
Currently we have DSL, but the upload speed inst cutting it, our current plan is:
Download: 1.5mbps
Upload: 512kbps
1 Dynamic IP
We are looking for something with the following:
Download: 1.5mbps or greater
Upload: 1.5mbps or greater
1 Static IP Address
Can anybody recommend any solutions in particular? Is t1 the only solution? We want to keep costs inline, and under $150 a month.
High bandwidth, fast speed, any cp, basic hardware-manag. only, trustable
View 4 Replies View RelatedPlease give me the difference. Colo in carrier hotel, we can choose our preferred network provider, but should we do that if we cannot have our own tech in datacenter? How about the supporting service from carrier hotel? Just general question, cause I dont address exactly which facility.
And the second would be more expensive? Saying the same number of rack, amount of bandwidth... Who is providing IP addresses then?
I am having some serious speed issues with my 1Gbit server at FDC. After opening a ticket, they've simply dismissed it as a server configuration problem. However I am convinced it isn't because certain ISP's (usually universities) get good speeds, usually 700kb/sec but the vast majority of my users get between 20-50 kb/sec and it's causing a lot of complaints.
Furthermore I have other servers with FDC which are 100mbit which perform better than my 1 Gbit one. There are no server bottlenecks (CPU/RAM/HDD), since I've closely monitored them (PRTG) and they aren't even heavily utilised. So the problem is with the network at some point.
Speed Test : [url]
where abouts you are downloading from, your ISP and net connection. Wget's from servers are also welcome as are traceroutes.
I have a cPanel server with 4GB RAM
My server hangs time to time, once or twice a day. This is the last status when it happens.
Server Load 75.90 (2 cpus)
Memory Used 92 %
Swap Used 65.78 %
When I was still inside SSH when it happens, the processes I can see inside "top" are a lot of httpd processes.
So I "killall -9 httpd", I had to do it 30~40 times
#killall -9 httpd
#killall -9 httpd
#killall -9 httpd
x 30~40 times until no pid process found & the server load is back to normal.
Before that, I check httpd fullstatus, they look very normal, same goes to what I see inside WHM Apache status & cpu usage status.
At first I thought it was a memory problem after consulting with a server admin, so I replaced all 4GB new ram stick (such a waste)
This is my free -m
total used free shared buffers cached
Mem: 1998 1903 95 0 45 542
-/+ buffers/cache: 1315 683
Swap: 2662 36 2625
Not good ....
I got 5 wordpress and 5 statics website on this server and 100 visitors by 24H00 each day.
Question 1 : Why the memory is so low and the swap so high ?
Question 2 : Why i don't find high usage process in top command ?
Question 3 How can i resolve this problem ?
My server is very slow, High CPU, High Apache load....
I got a new server and i had setup a script on it.
No server tweaks has been done.
I run a filehosting site so it gets very slow when traffic is high.
Here is some info:
Code:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
4135 filedip 19 0 12812 8892 2212 R 18.9 0.4 0:00.74 index.cgi
3140 apache 15 0 22624 9604 2768 S 17.3 0.5 1:54.45 httpd
3556 apache 15 0 22792 9592 2768 S 17.3 0.5 0:43.53 httpd
3739 apache 15 0 22672 9556 2744 S 17.3 0.5 1:09.67 httpd
3884 apache 15 0 22664 9560 2744 S 17.3 0.5 0:23.98 httpd
3474 apache 15 0 22672 9572 2756 R 16.1 0.5 1:34.09 httpd
3548 apache 15 0 22792 9560 2740 S 16.1 0.5 1:33.67 httpd
3991 apache 15 0 22640 9588 2756 S 15.1 0.5 0:22.44 httpd
3475 apache 15 0 22672 9580 2756 S 13.2 0.5 1:31.42 httpd
3493 apache 15 0 22664 9592 2768 S 12.9 0.5 1:15.52 httpd
3769 apache 15 0 22664 9580 2756 S 12.9 0.5 0:45.19 httpd
3638 apache 15 0 22664 9576 2756 S 12.3 0.5 0:32.82 httpd
3724 apache 16 0 22664 9580 2756 R 12.3 0.5 0:34.25 httpd
3626 apache 15 0 22672 9580 2756 S 11.7 0.5 0:52.54 httpd
4023 apache 16 0 22792 9560 2740 R 11.3 0.5 0:13.16 httpd
3882 apache 15 0 22664 9576 2756 S 10.1 0.5 0:38.56 httpd
3005 apache 15 0 22672 9588 2768 R 9.1 0.5 2:06.61 httpd
I dont know much about server managment...
how to fix this so server doesnt go slow?
I have a site that is eating up my server resources and need to know what the best solution for this is. I'm thinking of getting another server just for mysql but do not know what specs the server should be to handle the current traffic/database load and have the site run smoothly without slowing down to a snail's pace.
An alternative is to get another server just for the videos being served and leave the database and html on the current server. This is where I'm stuck and don't know what route to take with this.
My current server stats:
Dual Xeon 5130
4GB RAM
250GB
50 Mbit/sec
CentOS 3.9
Website traffic stats:
15,000 visitors/day
150,000 pageviews/day
Serving videos
I've attached screenshots of top and bandwidth usage per day. Hopefully with this information you could tell me if I need another server or if there are any things I can do to the current server to help things move faster.
I am running in a High load problem lately. I have one of those cheap 1and1 servers which was running fine until 2 weeks ago. Once I rebooted accidentaly, it did not come back with some unrepairable kernel errors and I had to re-image it.
I chose to reimage the server with CentOS 5, for better support. The new re-image worked fine for some days, at least so I thought and now I am having high loads. The server crashes if not monitored every moment as the load is unpredictable.
Just a restart of the Apache will bring the server back to normality, but I am not sure if it is apache or some other script to be blamed.
I have beeing monitoring through apache server-status, but I cannot organize something unusual in the high load moments.
At this moment for example:
top - 09:00:36 up 15:43, 3 users, load average: 3.57, 4.60, 5.32
Tasks: 144 total, 2 running, 142 sleeping, 0 stopped, 0 zombie
Cpu(s): 10.6%us, 6.5%sy, 0.0%ni, 18.7%id, 63.5%wa, 0.2%hi, 0.5%si, 0.0%st
12:00:29 AM CPU %user %nice %system %iowait %steal %idle
12:10:01 AM all 9.14 0.00 5.52 44.66 0.00 40.68
12:20:14 AM all 6.83 0.00 3.98 27.88 0.00 61.32
12:30:10 AM all 6.44 0.00 4.20 81.25 0.00 8.11
12:40:09 AM all 5.25 0.00 4.09 81.93 0.00 8.73
12:50:15 AM all 5.11 0.00 3.79 90.74 0.00 0.36
01:00:07 AM all 7.22 0.00 4.52 57.11 0.00 31.15
01:10:13 AM all 6.89 0.00 4.01 55.38 0.00 33.71
01:20:14 AM all 4.37 0.00 3.27 41.88 0.00 50.48
01:30:25 AM all 4.26 0.00 3.29 63.42 0.00 29.03
01:40:06 AM all 27.18 0.00 4.75 58.27 0.00 9.80
01:50:03 AM all 29.64 0.00 6.61 51.50 0.00 12.25
02:00:07 AM all 27.00 0.00 8.48 55.49 0.00 9.03
02:10:10 AM all 19.29 0.00 4.97 73.80 0.00 1.94
02:20:04 AM all 37.85 0.00 6.78 40.70 0.00 14.67
02:30:05 AM all 15.65 0.00 4.80 68.47 0.00 11.08
02:40:08 AM all 9.06 0.00 5.60 37.49 0.00 47.86
02:50:07 AM all 5.36 0.00 3.62 42.29 0.00 48.73
03:00:02 AM all 6.05 0.00 4.08 47.27 0.00 42.60
03:10:02 AM all 4.22 0.00 3.68 38.17 0.00 53.93
03:20:02 AM all 4.06 0.00 3.75 41.37 0.00 50.82
03:30:22 AM all 4.42 0.00 3.93 45.25 0.00 46.41
03:40:11 AM all 4.34 0.00 3.95 39.58 0.00 52.13
03:50:02 AM all 4.67 0.00 4.01 32.53 0.00 58.80
04:00:08 AM all 3.72 0.00 3.87 28.40 0.00 64.02
04:10:02 AM all 13.49 0.00 6.58 20.82 0.00 59.10
04:20:01 AM all 6.70 0.00 4.63 6.06 0.00 82.61
04:30:02 AM all 1.44 0.00 1.21 4.75 0.00 92.59
04:40:01 AM all 12.42 0.00 8.12 7.65 0.00 71.81
04:50:02 AM all 1.43 0.00 1.07 4.02 0.00 93.47
05:00:02 AM all 1.60 0.00 1.40 8.62 0.00 88.38
05:10:10 AM all 3.80 0.00 3.02 17.86 0.00 75.32
05:20:06 AM all 5.10 0.00 4.22 23.34 0.00 67.34
05:30:02 AM all 1.54 0.00 1.40 11.22 0.00 85.85
05:40:05 AM all 1.75 0.00 1.89 13.12 0.00 83.23
05:50:12 AM all 2.15 0.00 2.22 18.92 0.00 76.72
06:00:02 AM all 1.92 0.00 2.01 12.87 0.00 83.20
06:10:02 AM all 2.27 0.00 2.16 11.53 0.00 84.04
06:20:03 AM all 3.56 0.00 3.02 25.26 0.00 68.16
06:30:10 AM all 2.66 0.00 2.05 18.13 0.00 77.16
06:40:02 AM all 2.58 0.00 2.25 22.87 0.00 72.30
06:50:02 AM all 2.68 0.00 1.92 15.77 0.00 79.63
07:00:03 AM all 3.06 0.00 2.48 26.01 0.00 68.46
07:10:03 AM all 3.65 0.00 3.20 36.54 0.00 56.61
07:10:03 AM CPU %user %nice %system %iowait %steal %idle
07:20:03 AM all 4.40 0.00 3.28 43.86 0.00 48.46
07:30:02 AM all 4.10 0.00 3.17 31.30 0.00 61.43
07:40:06 AM all 7.67 0.00 3.95 50.79 0.00 37.59
07:50:02 AM all 4.72 0.00 3.11 44.30 0.00 47.86
08:00:03 AM all 5.57 0.00 3.72 47.15 0.00 43.56
08:10:07 AM all 10.66 0.00 3.59 71.62 0.00 14.13
08:20:17 AM all 5.67 0.00 3.42 58.81 0.00 32.10
08:30:10 AM all 11.12 0.00 3.49 76.71 0.00 8.67
08:40:03 AM all 7.00 0.00 3.36 47.94 0.00 41.71
Average: all 7.53 0.00 3.76 38.90 0.00 49.81
Some configurations:
The reimage partittioning looks like this:
/dev/sda1 950M 138M 765M 16% /
/dev/sda5 4.7G 1.9G 2.9G 40% /usr
/dev/sda7 63G 58G 5.0G 93% /var
/dev/sda6 4.7G 23M 4.7G 1% /home
none 1.0G 500K 1.0G 1% /tmp
KeepAlive On
MaxKeepAliveRequests 300
KeepAliveTimeout 15
<IfModule prefork.c>
StartServers 10
MinSpareServers 20
MaxSpareServers 50
ServerLimit 256
MaxClients 180
MaxRequestsPerChild 2000
</IfModule>
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
skip-locking
query_cache_limit=1M
query_cache_size=32M
query_cache_type=1
max_connections=250
interactive_timeout=100
wait_timeout=20
connect_timeout=10
thread_cache_size=80
key_buffer=64M
join_buffer=1M
max_allowed_packet=16M
table_cache=512
record_buffer=1M
sort_buffer_size=1M
read_buffer_size=1M
max_connect_errors=10
thread_concurrency=2
read_rnd_buffer_size=1M
myisam_sort_buffer_size=64M
server-id=1
processor : 1
vendor_id : GenuineIntel
cpu family : 15
model : 3
model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
stepping : 4
cpu MHz : 2793.324
cache size : 1024 KB
I have extremely high CPU load average, but when I run TOP command there are not any process with high CPU
CPU load averages:
211.65 (1 min) 227.29 (5 mins) 247.89 (15 mins)
Tasks: 364 total, 2 running, 360 sleeping, 2 stopped, 0 zombie
Cpu(s): 0.0%us, 0.3%sy, 0.0%ni, 0.0%id, 99.7%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 2065460k total, 2012372k used, 53088k free, 60964k buffers
Swap: 2040212k total, 3280k used, 2036932k free, 619900k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
19871 root 15 0 4944 2488 1656 R 1 0.1 0:02.73 top
1 root 15 0 4208 1320 1136 S 0 0.1 0:01.55 init
2 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0
3 root 34 19 0 0 0 S 0 0.0 0:01.77 ksoftirqd/0
4 root RT 0 0 0 0 S 0 0.0 0:00.01 migration/1
5 root 34 19 0 0 0 S 0 0.0 0:01.16 ksoftirqd/1
6 root 10 -5 0 0 0 S 0 0.0 0:01.04 events/0
7 root 10 -5 0 0 0 S 0 0.0 0:00.65 events/1
8 root 10 -5 0 0 0 S 0 0.0 0:00.00 khelper
9 root 11 -5 0 0 0 S 0 0.0 0:00.00 kthread
35 root 10 -5 0 0 0 S 0 0.0 0:00.15 kblockd/0
36 root 10 -5 0 0 0 S 0 0.0 0:00.00 kblockd/1
37 root 15 -5 0 0 0 S 0 0.0 0:00.00 kacpid
127 root 10 -5 0 0 0 S 0 0.0 0:13.16 ata/0
128 root 16 -5 0 0 0 S 0 0.0 0:00.00 ata/1
129 root 10 -5 0 0 0 D 0 0.0 0:01.15 ata_aux
130 root 10 -5 0 0 0 S 0 0.0 0:00.00 kseriod
158 root 16 0 0 0 0 S 0 0.0 0:00.00 pdflush
159 root 15 0 0 0 0 D 0 0.0 0:01.00 pdflush
160 root 10 -5 0 0 0 S 0 0.0 0:10.68 kswapd0
161 root 11 -5 0 0 0 S 0 0.0 0:00.00 aio/0
So my server is "unresponsive" for abour 18 hours, burst net didnt answer my tickets and I dont know what to do. Ive been with this setup for almost 5 months with no problems, No changes have been made to hardware or software.
Im using Centos 5.0
After reading tons and tons of messages on these forums... I have decided to get a VPS from KnownHost or SLhost.com.
KnownHost packages are a bit more expensive than SLHost (prepaying 6 months), however I am not looking to save a buck or two. I want the best speed for the money.
Can anyone tell me which of these two has the best performance (server performance and bandwidth performance) for the money?
KnownHost offers:
200GB Premium Bandwidth
256MB Guaranteed RAM Burstable to 768 MB
10 GB Disk Space
$5 - Control Panel
$402 per year with Control Panel
SLHost offers:
300 GB Bandwidth
384 Guaranteed RAM (Burstable unknown?)
20 GB Storage
4 IPs
Free Control Panel
$389.64 per year
Just trying to figure out which one would give me the best performance...
ive got a site (heavily mysql/php based) and ive installed e-accel and mod_gzip. im wondering if anyone knows any other ways to speed up the site ?. mysql has been optimized also.
its pretty quick loading now but i want tho get it running as fast as possible
how do we speed up NFS connections?
This is what I currently have in the server exports:
Code:
/images 192.222.0.3(rw,no_root_squash) 10.111.0.11(rw,no_root_squash)
I am trying to purchase a server and HiVelocity gave me a really good quote. But their speed test did not turn out really good.
Anyone can share their views on their network and speed?
I want ask How i know the Server Download speed from Rapidshare ? I have windows Dedicated Server with 1GB Port and when i download something from rapidshare its just 2MB/s , is that Normal ? and now i am thinking to Buy another one , How i can know the Download speed from rapidshare site ? I ask some Company about that but No one give me test or any thing like that ,
View 6 Replies View RelatedI recently setup WAMP on my dedicated, and I'm unsure if the slow download speed is from WAMP or something else I need to remove from the dedicated. Might just be the distance I am from the dedicated because it's hitting 88.74Mb/s down and 71.19Mb/s up from a local city.
It's located in Kansas city, MO.
208.94.241.242/speedtest/
I ordered my first vps and uploaded a 1 page web site with a few graphics. I browsed to the web site and it took longer than normal to load the entire site with all graphics.
Is there a way that I can test my vps account speed?
Is it normally to get an 8-9 mb/s down speed and 2-3 mb/s upload with this server?
View 11 Replies View RelatedCan i have a speed test from different locations. [url]
View 14 Replies View Relateddo you know vps4less? I have a plan there. LxAdmin is very slow but hyper vps is fast.
View 2 Replies View Relatedi have this couple of windows 2003 servers, colocated in data center, i need to improve download speeds to our customers who are at least 200ms away, the end user is not using download accelarator,
is there a way that any settings to be done on server so that per thread speed can be increased, this case the server and client both have the ability to make a connection at more than a megabit speed. i did some search but all the articles point to end user and not the server saying to increase tcp window size etc.. not sure if those articles relate to server side changes.
Can a few people try to download the test file in [url] and tell me what speeds you get and from which location?
I'm comparing UK2 and RapidSwitch. I'm interested to know the d/l speeds from East/West coast USA, Asia, Australia. I'm assuming Europe would be fast.
uploading some stuff to my servers, and it's going at about 50-60 kbps.
what would be a good service that could see my uploading speed rise to about 100-200 kbps?
I live in Canada, BC to be more specific
I am the server in my house and speed of communication server 2 MB per second Is this good speed Browsing
View 5 Replies View RelatedAfter reading a lot of good reviews on Softlayer around here, I was thinking about switching to them. They have some really good deals and I'm planning on getting one of their dual opterons, but I have a question about the processor speed in relation to database intense stuff (like a forum with a good number of users on at once, or a CMS).
I have the option of either going for a Dual Opteron 248 (2.2 gHz) or a 252 (2.6 gHz) which costs $50 more. My question: is the 252 really worth the extra money compared to the 248? All I have on my server is an IPB forum with 100-450+ users on at any given time, and a static site (soon to be converted to a CMS), and I'm thinking that RAM is more important than the processor for a database app like those (that, and hard drive speed). So I wanted to know if it would be better to go with the 248 and spend the money on more Ram and a SA SCSI 10k drive or two?
I just bought a hosting on one of the American servers providers, so I am interested how fast my site loads at different locations around the world. Mainly I am interested in US, Europe and Australia. I am from Europe but, my connection is not so great
I want you input on how fast does it load on your end, and maybe how high ping is from your provider.
I hope there are some people who want to help me. I want post a link here because then people will complaint that I am advertising the site...
So if it is not a problem just post a message on this topic and I will send you a link true private message.
Thanks
how can we ridiculously speed up SAMBA connections?
View 6 Replies View Related