Forcing Qmail To Acknowledge Typo In Recipient Email Address And Try Again...

Jul 27, 2006

I was looking at my qmail queue using qmHandle and noticed that one of the emails sitting in the queue was simply there because of a blatant typo in the email address.

Therefore, I went to the appropriate file in

/var/qmail/queue/mess/*/*

and edited the file to reflect the new email address.

Does this work at all, or should the user resend the email? I naturally don't want to look at email that isn't intended for me (which is why qmHandle is a useful tool -- because only headers are available) nor do I want someone to know that I know their email is sitting in the queue (because they might assume that I *am* reading their email even though I'm not!)

I tried qmHandle -a to no avail; the email address has been edited as per my changes, but the email is still just sitting there.

View 3 Replies


ADVERTISEMENT

Plesk 11.x / Linux :: Recipient Address Rejected Email

Jan 18, 2015

I have some email problem

CentOS 6.6 (Final)
Plesk version12.0.18 Update #29, last updated at Dec 22, 2014 03:39 AM

When sent mail to all @nblobe.com I got smtp 550 rejected

See log below:

Jan 18 10:55:12 server2 postfix/smtpd[3498]: NOQUEUE: reject: RCPT from localhost[::1]: 550 5.1.1 <jcree@nblobe.com>: Recipient address rejected: User unknown in virtual mailbox
table; from=<mail@server2.888.com> to=<jcree@nblobe.com> proto=ESMTP helo=<webmail.server2.888.com>

From webmail.nblobe.com I can send mail but they do not delivered, but I can receive mail...

View 2 Replies View Related

Qmail - Does Not Like Recipient???

Nov 14, 2006

Hi,

I can receive emails from qmail but couldn't send out any... I checked my mail logs and found:

Nov 14 17:53:20 server relaylock: /var/qmail/bin/relaylock: mail from 11.22.333.444:37277 (server.domain.com)
Nov 14 17:53:23 server qmail: 1163498003.114915 delivery 708: failure: 11.22.333.444_does_not_like_recipient./Remote_host_sai$

Nov 14 17:53:19 server qmail-queue[11421]: mail: all addreses are uncheckable - need to skip scanning (by deny mode)


11.22.333.444 is my server ip. Why Do I got this error and how to fix it??
Anyone help please greatly appreciate.

Thank you

View 0 Replies View Related

Plesk And Qmail :: Undelivered Email

Apr 21, 2009

I have server running Plesk 8.6 with Qmail. Recently some users complain that when they send email out they received undelivered email from Qmail (plesk) with lots of unknown address. Users are concerned about that mail server is sending out mail that they did not send it to. I have attached one of the typical example that user got.

I have changed domain name and ip address for dummy address. I have no clue that the server automatically append those junk email address to the senders email or the client application did it without user's consent.

View 9 Replies View Related

Email (qmail, Sendmail) Problem - Not Sending

Jul 31, 2009

I am having problem with qmail. I have forum and users are not getting emails send via forum.
I don't care about receiving e-mails and I never do. All I want is for outgoing mail server to be working.

Any ideas how to troubleshoot? Also, I think qmail came as a default (preinstalled) on my server. Is there some other program I should rather use for my purposes? (Again, all I need is *outgoing* mail server). I am using CentOS.

Here is output of 'ps aux' command, related to mail services ....

View 1 Replies View Related

Plesk 11.x / Linux :: Qmail Email Messages Always In Queue

Nov 17, 2014

I have a server(godaddy) with plesk. It was all working well till 8 - 10 days ago. I didnt notice it one week later where I started receiving a lot of failed mail notices. Then on investigation, there were more then 50K spam mails in the mail queue and the mails that were supposed to be sent(registration, forgot password) were also held up in the queue. I found the source of the spam and fixed that.

Also I cleared the mail-queue. Now when I try to send out a test message, it still gets held up in the mail queue. But I can send a test mail to the same domain (info@mydomain.com). All new user registration mails are also held up and this is greatly affecting the site.

View 1 Replies View Related

Qmail :: Forward A Mail Then Delete Foward Email Automatic?

May 2, 2008

It may seem strange this but, is possible forward a mail then delete foward email automatic? or there are other way to delete emails come with a specify email.

View 4 Replies View Related

Postfix Recieving Email For Deleted Email Address

Jul 18, 2009

I had a email address I deleted on my server (postfix on Debian 4), but to my surprise the server still recieves email for the address!

(I have manually tried sending a email to the address and it comes througt).

I have deleted the address from the /etc/postfix/virtual file and restarted postfix.
What could I have forgotten?

View 7 Replies View Related

Install QMAIL Mail Server With Qmail Admin And All..

Aug 24, 2007

i have a fedora core 4 server.. and i want to install a good Qmail email server to host some emails of diferent domains..

On searching i found that Qmail should be install with those associated programs/system for a better server :

Qmail itself
EZmlm and EZmlm-idx
Autoresponder
Vpopmail
VQadmin
maildrop
QmailAdmin
Courier-imap/imaps with Courierpassd
Squirrelmail web mail program ......

View 7 Replies View Related

Email Address And Hits

May 13, 2008

I just wanted to know that could we track or are able to know the actual email address of the user that hits on our website or is this possible from the provider / host to know?

I just looked into some of the services like -

Trace Email
Domain Look up
Trace IP

But somehow it does not full fill my above query. Or it is not at all possible to track email addresses directly ?

View 6 Replies View Related

How To Access Email Through IP Address

Apr 30, 2008

I am migrating a client from Plesk to my cPanel server and I want the client to be able to access webmail on their old server through their IP address during the migration.

On my cPanel server, webmail can be reached at [url]or [url]

The problem is that none of the above urls is working on the Plesk server. The webmail for the domain is currently at [url]. Could anyone tell how can I reach webmail on Plesk through their current IP address?

View 5 Replies View Related

Encrypted Email Address In Who.is Look Up

Apr 16, 2008

I recently stumpled upon this really good domain name which is squatted. I did a who.is look up on the domain so that I may contact the owner but all I get is this encrypted email address:

e-mail: 804c93ec0559b7bea8c91fcbf390296-bh867@contact.gandi.net

Does this mean that the domain owner has chosen to hide his email so that he wont be contacted?

View 7 Replies View Related

How To See What Email Address Resolves Where

Jan 24, 2007

what do i type into Command Prompt to see where a email address comes from. eg myname@domain.com resolves to host.mydomain.com

View 4 Replies View Related

Sending Email To Another Server When The Email Address Domain Is On This Server

Jun 24, 2008

I currently have a domain on Server 1 (Linux, Apache, Ubuntu, Matrix control panel).

This server does not have any spam filter, so I have moved all the email accounts to Server 2 (Linux, Apache, Fedora Core, Plesk) which does have a brilliant spam filter; and have changed the DNS record for mail.domain.com to the IP address for Server 2.

Emails are being successfully received on Server 2.

On Server 1, when an email is sent through SMTP to an address at that domain, it does not send it to Server 2, it gets delivered to the hosting account for the domain on Server 1. So what I am guessing is happening is that Server 1 detects the domain has an account on the server, and instead of looking up the DNS info for that domain, just assumes it is on Server 1.

What I need to do, is force Server 1 to send email for that domain to Server 2. Is this possible, and if so, how can it be achieved? If more info about the server is required for a solution please let me know and I'll provide what I can.

View 5 Replies View Related

RDP Sessions - Forcing New Session

Sep 3, 2008

I've come across an issue where our users are not logging out of their terminal services session properly. Whether via TSWeb or MSTSC (remote desktop), if they close the browser or RDP window using the x it keeps the session alive for upto 1 minute.

The problem with this is that we use terminal services to host an application for users who can't install it, so other users that login (using a generic username and password) are adopting/hijacking the original session and seeing someone elses data.

Does anyone know of a way to force a new session each time a user connects to RDP? Whether via TSWeb or MSTSC (remote desktop)?

View 7 Replies View Related

Forcing Secure Protocols?

Dec 25, 2008

how customers feel about being forced to use secure protocols?

For example on a cPanel server this would mean:

FTP: requires authentication over TLS
SMTP: relay requires SMTP authentication over TLS.
POP3: requires SSL
IMAP: requires SSL
cPanel: only https port enabled.
WHM: only https port enabled.
Webmail: only https port enabled.

Honestly, I don't think most customers would notice the difference so long as they were initially configured using secure protocols.

Combined with forcing reasonably strong passwords this should prevent a lot of iframe injection issues and SPAM related issues.

View 10 Replies View Related

Mail() Only Works With An Outside Email Address

Apr 8, 2009

lets say i am running the mail() script at www.testdomain.com - if i set anyemail@testdomain.com as the to or from email address, it will take 20-60 seconds to complete. If I use ANY other email gmail, yahoo, fake, whatever on either, the script executes instantaneously. What could be the problem? I am a newbie at all this and would appreciate any guidance I can get here as far as diagnosing, etc.

View 1 Replies View Related

Receiving Spam From My Email Address

Nov 24, 2008

One of my clients is receiving spam from his email address. SpamAssassin is not marking it as spam. I have added an SPF record for the domain, but still gets these messages. Is there any workaround for this? I don't want to activate spambox for that.

Server is cPanel + CentOS 5.2

View 9 Replies View Related

Found Email Address I Never Created

Mar 9, 2007

This is twice I have found email addresses on the web that I have never created. Both domain names are the new extensions and I purchased them the first day they become public. .biz the other is .US

One of the domains I never even created a web page until yesterday. And today I find a German site using my domain as an email address. One note on this, this domain name is extremely unique and related to certain German ideas or thoughts.

I am thinking someone at the server created them and used them for their personal use. Is this possible?

Not only that, but I have sent email to these addresses and there was no bounce back. No bounce back meaning these are valid email addresses?

View 4 Replies View Related

HiVelocity Forcing Cogent Outbound

Mar 29, 2009

Could you guys look and see if what I am seeing is right? They offer Global Crossing and Cogent officially. So if I use GLBX looking glass, I get this.

Trying trace from node 'Miami, FL, US' to '96.31.73.xxx'
1 64.214.16.65 (64.214.16.65) 0.761 ms 0.608 ms
2 so0-0-0-2488M.ar2.TPA1.gblx.net (67.17.66.165) 5.690 ms 5.695 ms
3 WBS-CONNECT-LLC.ae0.409.ar2.TPA1.gblx.net (64.214.147.222) 5.731 ms 5.880 ms
4 69.46.31.106 (69.46.31.106) 7.442 ms 6.667 ms
5 node1.sarorahosting.com (96.31.73.2) 15.734 ms 15.993 ms
6 96.31.73.xxx (96.31.73.xxx) 15.861 ms 15.795 ms

Now if I tracert from the VPS to the GLBX router, I get this.

traceroute to 64.214.16.65 (64.214.16.65), 30 hops max, 40 byte packets
1 node1.sarorahosting.com (96.31.73.2) 0.072 ms 0.035 ms 0.008 ms
2 69.46.31.105 (69.46.31.105) 0.731 ms 0.863 ms 1.003 ms
3 gi0-6.na21.b001841-0.tpa01.atlas.cogentco.com (38.99.204.33) 1.147 ms 1.142 ms 1.428 ms
4 gi4-1.core01.tpa01.atlas.cogentco.com (38.20.33.89) 0.818 ms 0.814 ms 0.807 ms
5 po2-0.core01.mco01.atlas.cogentco.com (154.54.27.90) 148.004 ms * *
6 po5-0.core01.jax01.atlas.cogentco.com (66.28.4.146) 5.847 ms 5.839 ms 5.872 ms
7 po5-0.core01.atl01.atlas.cogentco.com (154.54.3.197) 11.953 ms 23.819 ms 23.870 ms
8 te3-3.ccr01.atl01.atlas.cogentco.com (154.54.5.38) 11.721 ms 11.752 ms 11.787 ms
9 te8-2.mpd01.atl04.atlas.cogentco.com (154.54.3.174) 11.962 ms 11.921 ms 11.987 ms
10 ge4-1-0-390-1000M.ar4.ATL1.gblx.net (64.208.110.97) 12.252 ms 12.359 ms 12.444 ms
11 64.214.16.65 (64.214.16.65) 16.026 ms 16.061 ms 16.594 ms

Now what would be causing this to happen?

View 1 Replies View Related

Forcing A Webhost To Hand Over My Domain

May 1, 2008

one.com (aka the worst webhost ever) are holding my domain to ransom they refuse to unlock it. Is there anyway i can go over their heads and get control of it? the address is mine, so is the phone number and email. The admin contacts are not.

View 13 Replies View Related

Jaguarpc Lock Up All The VPS Forcing Us To Upgrade

Apr 9, 2008

Jaguarpc lock up all the VPS forcing us to upgrade. could anyone please report to Police or other authority in concern, It 's hijacking and blackmailing.

View 14 Replies View Related

Forcing Script On Page Load

Nov 22, 2007

using somewhat clever techniques, I've managed to put together a script that will check various rbls, honeypots, and the like, ie: to keep the bad guys out, and the good guys in.

I've managed to put this into play on a per site basis, using simple

PHP Code:

<? require_once("/home/user/httpbl/script.php");?>

so that I don't have to change 500 scripts every time I want to modify it, I just change it once per server. Pretty simple there.

The problem is that I'd like to use this on a more global basis, as in putting it in apache configurations, so I don't have to load it on a per-site basis, and can catch more of what needs to be caught.

View 4 Replies View Related

Trace If An Email Address Has Been Blocked By A Host?

Jan 31, 2005

Just wondering if there was a way to trace if an email has been blocked by a webhosts server.

My customer gets an automated email when he books online for Qantas Australia (Australia's biggest Airline Company). I have moved them from an Australian based web host to a US based server and host.

Since the host move, these emails no longer go through to the clients email address on the new hosts server.

I got Qantas to send the email through to me which is on a US server also but a different host to that of my client?? But they did not come through to me even.

I got Qantas to send it through to my personal email address (an Australian bigname ISP) which went through fine and I received it.

The auto generated email possibly could be coming through a 3rd party server so I was thinking maybe this server IP has been blocked for whatever reason (if 3rd party it could have been anyone) It is just strange that used to get them OK through the Australian server and still through my persoanl Australian ISP.

So is there a way to check and confirm and secondly if my suspicions are right would there be a process of trying to get the hosts to accept an email from Qantas as this customer doesnt want to have another email account.

View 10 Replies View Related

Block My Own Email Address To Receive Spam

Jun 11, 2008

I have configured qmail+spamassassin. It working find but still I have 2 problem. I am receiving spam mails from my own account to my own account e.g. from=info@domain.com to info@domain.com. How can I block this spam?

View 2 Replies View Related

Change Root Server Email Address

Feb 1, 2008

How do I go about changing the root's server email address?

View 3 Replies View Related

Emails In Response To Autoresponders Going To Two Email Address's

Jan 3, 2008

Anyone here got any experience with autoresponders?

An autoresponder is setup, so that anyone emailing to admin@example.com, gets an autoresponder from enquiries@example.com asking for a couple of details, the person then replies to the autoresponder with the details, they then receive another autoresponder from enquiries@example.com confirming receipt of their last email. That's what should happen, but instead, the person keeps getting an autoresponder from enquiries@example.com asking for more details, even after they've already emailed the details?

If it's any help, when I've been testing this, when replying to the first autoresponder, I notice in the 'to' line it mentions both email address's, in the following format:
Enquiries@example.com <admin@example.com>

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved