How would I go about setting up Bind on one of my Dedicated Servers? I noticed that you use three dns servers through pipedns and I thought you might be able to help me answer this question.
How would I be able to have my friends and I point our domains to my server(s) and have bind make it work? I want to have one dns server and then I have my friends each on there own DEDI using my bind dns servers but I'm not sure how to do this.
How would we add domains and the bind server know which server they are hosted on? Do you have to add the domains through bind? If so, how would I do that automatically and how would it work through cPanel when someone parks a domain?
I know reminds you of something else doesn't it? Seriously though, If I have 1 managed linux dedicated server (CentOS w/ cpanel v.11) and 1 managed windows dedicated server (Windows Server 2003 w/ Plesk 8) and want to the setup automatically through WHMCS under the same domain name (or appearance) how would I accomplish this task?
I know that I could simply add additional servers to the server configuration of 1 whmcs billing software installation. The problem is if I had to buy a separate domain for the other server and run them through 1 website it may appear shady to have the domain name change in the url during checkout.
I've seen few web hosts other both kinds of hosting through 1 website without redirecting to a different domain. If I have to have 2 different domains assigned to 2 different server boxes could I mask/cloak/I don't know the technical word for it so that the url appears as the same domain weather purchasing shared hosting for windows or linux?
I recently had my registrar change the name servers of [url] to point to a new host. Its been a month since that change was made.
When I go to the website on my work computer, it seems to point to the new host during the day but in the evening around after 5PM for some reason it points to the old host. My registrar refuses to acknowledge a problem because they see the WHOIS information pointing to the correct name servers.
When it is pointing to the new host I can login to cpanel and webmail using the new hosts' credentials. When it is pointing to the old host I can only use the old login credentials for the old host.
So far this has only happened to me at work. Could it be something to do with my work ISP? When the domain is incorrectly pointing to the old host I can ask friends on other ISPs over instant messenger to check the domain and they are referred to the new web host.
I would like to host 1 domain with 2 servers. How would i get both servers to have the same info on them. I have 2 servers and I only have the intended need to host 1 website. How would I do that?
I'm trying to set up a new site on a new server, primarily informational, while maintaining the old order-taking and database functionality of the existing one. This new one is an Ubuntu vm with samba and apache all set, but the old one is running Tomcat and basically takes java programming to update. How can I properly route incoming requests to the proper server, pass back and forth login information (which resides on the old server), etc? I'm a relative newbie to all this, so the solution might be blindingly obvious, but it's a bit daunting to get them working in tandem.
Both are running exactly the same stuff - Centos 5.3, cPanel/WHM, etc One domain (example.com), already pointing to first server (server1) Nameservers (ns1 & ns2.example.com) are set up in WHM of server1.
I then bought a second VPS (server2). I want to be able to set up subdomains of my main domain (sub.example.com) on the second VPS. I also want my existing nameservers to work for server2.
This way, I can provide subdomain packages to people and utilise both servers, and I can also provide the same nameservers to people regardless of the server they are on.
I went to the clustering section of the WHM's, I enabled, and I can see server1 in the WHM of server2, and the other way around. I selected Sync Changes under DNS Role. However I don't think that's really done anything.
How can I get this to work? Sorry if I've written it in a confusing manner.
I run a vbulletin based web forum ([url] and everything is going quite smoothly. We are currently in the process of getting a partnership with a supplement store.
Basically, our goal is to have our own store for Lean Bulk, but it will be run by a different company, and will be on their server.
Soo, the store database and custom script will be staying on their server, but my forums will be staying on my server. What I want is for the store to be located at [url]or [url]
Either one works for me. However, the tech guy that runs all the stuff for the store, is trying to tell me that this is "impossible." While it might be somewhat difficult, I have a hard time believing anything is really impossible.
The tech says the only thing we can do is have the store located at:
[url]
Personally, I think this looks unprofessional, and would rather stay away from this solution.
I run a vbulletin based web forum [url] and everything is going quite smoothly. We are currently in the process of getting a partnership with a supplement store.
Basically, our goal is to have our own store for Lean Bulk, but it will be run by a different company, and will be on their server.
Soo, the store database and custom script will be staying on their server, but my forums will be staying on my server. What I want is for the store to be located at [url] or [url]
Either one works for me. However, the tech guy that runs all the stuff for the store, is trying to tell me that this is "impossible." While it might be somewhat difficult, I have a hard time believing anything is really impossible.
The tech says the only thing we can do is have the store located at:
I have 2 servers. How do I setup the DSN for these 2 servers with my domain? For example, I have domain "mydomain.com" and server1 and server2. I want ns1.mydomain.com, ns2.mydomain.com --> server1 ns3.mydomain.com, ns4.mydomain.com --> server2
Exist a domain (domain.fm), this domain receives constant DDoS attacks and the webmaster of domain.fm has pointed the domain to my server and the DDOS attack has been redirected to me.
Is it possible to block this domain?
I noticed that the webmaster of domain.fm only points the domain to my server when attacked.
Yesterday my apache has been down for several hours.
I would like to block access to my servers from the domain domain.fm
I am about to create a domain for my shoutcast hosting service.
Now, I am getting a dedicated server just to host the shoutcasts accounts, and keep on using my actual web hosting company for the new domain website and email support.
Also I would like the shoutcast clients IP account to be:
server1.mydomain.com
So I need to create this subdomain in my shoutcast dedicated server?
And what Name Servers should I use for my domain?
I wonder, cos to be able to make the website and email I need to give the DNS of my web hosting company, but if I dont use the DNS of the Shoutcast Dedicated Server, would my clients be able to login to their account?
i have two nix vps's One of the vps is setup and running 2 ips, a nameserver and with whm/cpanel on a centos5 system. The other vps is just hypervm with lxadmin panel and one ip. I have nameservers setup on vps1 and all domains work. I would now like to add a domain name to the other vps and use the first servers nameserver. The second vps only has one ip so i wasnt able to setup the domain name there. Is there a guide on how to setup domain names accross two servers with one namesserver. I tried a few options but nothing seems to work.
what do i need to do in whm I already added the domain name to the second vps, i just dont know how to get it to point to first vps and first vps point to domain name.
I know how to work whm but am very new to lxadmin(only two weeks)
I am so lost I am using both plesk for linux 8 and plesk for windows 8 I am trying to figure out how to have one master dns server for all domains regardless of which server they are hosted on. So if I have ns1.mydomain.com and ns2.mydomain.com I want to have it across the board on all servers is this possible in plesk and how would I go about doing this.
I have a reseller account and a dedicated server box. I have my main website on my dedicated server box and sub domain / free clients on my reseller. How would i be able to get all created and already created subdomain cpanel accounts to work with the main website URL
example:
reseller account Free account with cpanel: client01.mydomain.com mydomain.com isnt hosted on the reseller account
I have a customer who registered his domain name with yahoo he now wants to point that domain to a hosting account that I have started for him at GoDaddy. Should be simple but it has been anything but.
He has emailed Yahoo several times with no response, he has called their tech-line only to be told he needs to email them instead. We finally figured out through GoDaddy that Yahoo registers through Melbourne IT. He has tryed calling Melbourne they are in turn asking for a 12 digit registration number that my customer does not have. Melbourne told him he needs to get this from Yahoo, Yahoo says they do not give registration numbers out. This leaves my customer with only 2 options, either register a brand-new domain through GoDaddy or go with Yahoo for hosting.
Has anyone else experienced this? Did you ever finally get through and get things transfered?
I have 1 main domain, I have hundreds of subdomains, and want to host the subdomains across multiple servers with cPanel. What's the best option for executing this?
I'm trying to see if it's possible to have 2 email addresses on the same domain (e.g. email1@domain.com and email2@domain.com) but are handled by 2 different email servers (e.g. mail.domain1.com and mail.domain2.com)?
To put it into context, I have a domain hosted on my dedicated server and a couple of email accounts set up on it. I also have another mail account set up on a different server but with the same domain. I was wondering if maybe something could be done with the DNS to allow the 'external' mail account to be handled by the other server?
We have two in-house servers, one is hosting our public web server. The other one was just purchased to host a mirror of the production server (as a backup). The site is protected by an SSL cert... my question is how do i set up the server(s) so if/when the backup server needs to be switched into produciton, the SSL cert will transition flawlessly?
I have hired two servers for plesk and I have the mail configured in one server and the website in another one, it all seems to work fine except for a problem.
When the server where the website is tries to send a message through a smtp account it can´t send it, it seems to be looking for the mail server in the same server where the website is instead of look for it in the other server.
