Configure One Domain On Multiple Servers ...
Feb 25, 2008
I am so lost I am using both plesk for linux 8 and plesk for windows 8 I am trying to figure out how to have one master dns server for all domains regardless of which server they are hosted on. So if I have ns1.mydomain.com and ns2.mydomain.com I want to have it across the board on all servers is this possible in plesk and how would I go about doing this.
View 1 Replies
ADVERTISEMENT
Dec 17, 2014
I have hired two servers for plesk and I have the mail configured in one server and the website in another one, it all seems to work fine except for a problem.
When the server where the website is tries to send a message through a smtp account it canĀ“t send it, it seems to be looking for the mail server in the same server where the website is instead of look for it in the other server.
How to configure this so it works correctly?
View 3 Replies
View Related
Oct 24, 2007
Does anyone know how I can run multiple servers. But still use the same Domain name.
Such as server one with ip 547.547.547.547 uses domain www,m1.domain.com
and server two has ip 547.548.548.548 but uses domain www,m2.domain.com
View 5 Replies
View Related
Feb 5, 2008
I run a vbulletin based web forum ([url] and everything is going quite smoothly. We are currently in the process of getting a partnership with a supplement store.
Basically, our goal is to have our own store for Lean Bulk, but it will be run by a different company, and will be on their server.
Soo, the store database and custom script will be staying on their server, but my forums will be staying on my server. What I want is for the store to be located at [url]or [url]
Either one works for me. However, the tech guy that runs all the stuff for the store, is trying to tell me that this is "impossible." While it might be somewhat difficult, I have a hard time believing anything is really impossible.
The tech says the only thing we can do is have the store located at:
[url]
Personally, I think this looks unprofessional, and would rather stay away from this solution.
View 11 Replies
View Related
Feb 5, 2008
I run a vbulletin based web forum [url] and everything is going quite smoothly. We are currently in the process of getting a partnership with a supplement store.
Basically, our goal is to have our own store for Lean Bulk, but it will be run by a different company, and will be on their server.
Soo, the store database and custom script will be staying on their server, but my forums will be staying on my server. What I want is for the store to be located at [url]
or [url]
Either one works for me. However, the tech guy that runs all the stuff for the store, is trying to tell me that this is "impossible." While it might be somewhat difficult, I have a hard time believing anything is really impossible.
The tech says the only thing we can do is have the store located at:
[url]
View 9 Replies
View Related
May 31, 2007
I have a reseller account and a dedicated server box. I have my main website on my dedicated server box and sub domain / free clients on my reseller. How would i be able to get all created and already created subdomain cpanel accounts to work with the main website URL
example:
reseller account
Free account with cpanel: client01.mydomain.com
mydomain.com isnt hosted on the reseller account
Dedicated
mydomain.com hosted here
View 4 Replies
View Related
Feb 11, 2007
Say if I have a domain www.example.com.
And two completely different physical dedicated servers with IPs 11.11.11.11 and 22.22.22.22
Is it possible to make a nameserver,
NS1.EXAMPLE.COM (33.33.33.33)
NS2.EXAMPLE.COM (44.44.44.44)
^^^^^^^^^
(The two IPs of the nameserver have been assigned to server 11.11.11.11)
to point to 11.11.11.11 and have two other name servers
NS3.EXAMPLE.COM (55.55.55.55)
NS4.EXAMPLE.COM (66.66.66.66)
^^^^^^^^
(The two IPs of the nameserver have been assigned to server 22.22.22.22)
to point to 22.22.22.22 and have two other name servers
I am pretty sure this wont work for some reason but I cant figure out why
View 12 Replies
View Related
May 2, 2013
I wanted to configure 2 clusters on Apache 2.4. Here are my sample configurations
Cluster 1 config:
----------------
<VirtualHost *:80>
ServerName mywebsite1.com
<IfModule mod_proxy_balancer.c>
<Proxy balancer://sgcluster>
BalancerMember http://IPaddress1:80/ loadfactor=1
BalancerMember http://IPaddress2:80/ loadfactor=2
ProxySet lbmethod=byrequests
[Code] ....
I've included both configuration file in httpd.conf. I'm getting the errors, when I tried to start up the apache.
[Thu May 02 11:01:34.243583 2013] [slotmem_shm:debug] [pid 9240606:tid 1] mod_slotmem_shm.c(448): AH02301: attach looking for /opt/apache2/logs/slo
tmem-shm-mod_heartmonitor.shm
[Thu May 02 11:01:34.243667 2013] [lbmethod_heartbeat:notice] [pid 9240606:tid 1] AH02282: No slotmem from mod_heartmonitor
[Code] .....
View 2 Replies
View Related
Jan 5, 2008
I am setup in a co-location facility. I just recieved my new SonicWall TZ180 which I am trying to setup.
Previously I had my server connected to the internet drop via a static ip address assigned via windows tcp/ip (1.1.1.2), nothing special there. Then I used Plesk and assign domains and ip addresses as normal.
My co-location facility gives me 4 static ip addresses, lets call them:
1.1.1.2
1.1.1.3
1.1.1.4
1.1.1.5
And an ip address called Network Gateway at:
1.1.1.1
And DNS ips at:
2.2.2.2
2.2.2.3
I am trying to figure out how I make this work now with the SonicWall. I am using Plesk, and I have already assigned all DNS settings and name servers to their proper static IP address, such as:
ns.mydomain.com -> 1.1.1.2
ns.myseconddomain.com -> 1.1.1.3
So I cannot use the local ip address (192.168.168.2) assigned to the server box by default by SonicWall using DHCP. I must use the actual static ip addresses assigned to me and already configured in Plesk. I have heard I need to use NAT, and assign the SonicWall the ip address of the network gateway: 1.1.1.1, then add the 4 standard static ip addresses into a pool in the sonic wall.
View 5 Replies
View Related
Jan 31, 2007
I have been tasked with setting up IIS6 to run 10 different sites. We will be using the Host Header Names approach as I do not have 10 IP addresses. I want to allow clients to upload/download to their site via FTP. My IIS6 books have examples of how to setup separate FTP sites for individual IP addresses, how do I accomplish this when using Host Headers? I just need to be pointed in the right direction.
View 2 Replies
View Related
Apr 4, 2007
how do you set up name servers for Lxadmin the first time? My VPS plan comes with 1 IP address. How do I set it up properly so I can get it to work (add domains etc)?
View 1 Replies
View Related
Feb 22, 2007
I am running IIS 6 for testing & developing web sites offline before uploading the.But i am having little problem reagarding name server and how to configure sub-domain in name server,
View 2 Replies
View Related
May 20, 2009
I have configured Apache+Tomcat on Linux server. I have configured 50+ domains not problem is that sometime when i configure new domain and restart the service and access the url http://domain.com i get following error ----->
HTTP Status 404 - /
type Status report
message /
description The requested resource (/) is not available.
but when i access same url with file like [url]i able to access that url and working fine.
same problem for subdomain also [url]same error but [url]is working so can anyone tell me what is the exact problem and how to solve this problem.
Note:- Other domains are working fine this problem is only with 2-3 domains and subdomain and secondly i have also set DirectoryIndex index.html index.jsp index.php
Please check my server.xml and httpd.conf ------->
<Host name="domain.com" appBase="/home/domain/public_html">
<Alias>www.domain.com</Alias>
<Context path="" reloadable="true" docBase="/home/domain/public_html" debug="1"/>
<Context path="/manager" debug="0" privileged="true"
docBase="/usr/local/jakarta/tomcat/server/webapps/manager">
</Context>
</Host>
<VirtualHost 192.168.1.1:80>
ServerName domain.com
ServerAlias www.domain.com
DocumentRoot /home/domain/public_html
ServerAdmin webmaster@domain.com
JkMount /*.jsp ajp12
JkMount /*.jsp ajp13
</VirtualHost>
View 0 Replies
View Related
Apr 8, 2009
i have just purchased a vps with 1 ip address now i just want one website on the vps can how to configure direct admin to work with the domain.
View 1 Replies
View Related
May 19, 2009
I currently have 2 web servers both running the cPanel Control Panel.
Out of the two servers only one is used and the other is just used currently to test scripts. It has come to a stage with the website capacity that I now require both servers to run in con-junction with each other to spread the load.
Questions:
1) There is a file upload service, How would you go about networking both the servers to allow remote removal / uploading of files to different servers. Eg, If user is on server 1 and files are stored on server 2. Also deletion of files etc - The website is programmed mainly in PHP.
2) File updating - The website is constantly being updated and therefore both servers will need the PHP files to be in sync. How would you go about doing this?
Both servers are at the same Data Center location.
View 3 Replies
View Related
Mar 9, 2008
We are looking for KVM/IP solution for multiple server. Where we can add the users remotely and give temporary access to the server owners. Once they are done we remove them from access list. So it can be used by someone else.
Anyone know for KVM/IP solution with kvm switch which can solve our purpose of KVM.
View 5 Replies
View Related
Jun 17, 2008
I currently have two servers, one is rhel 5 with cpanel, the other is windows 2003 with plesk 8.4
Each server wants you to setup a Hostname... one that is FQDN but not being hosted on that server so I setup a generic dns domain as follows...
SERVERCODNS.COM
Now for the hostname I setup both servers to be use this domain but different prefix... so...
SERVER1.SERVERCODNS.COM
SERVER2.SERVERCODNS.COM
Is this ok? Will I have problems?
My cpanel continues sending me emails nightly that my DNS is routing to another ip?
which bring sup my next question...
Is is ok to NS1.SERVERCODNS.COM, NS2.SERVERCODNS.COM for say the RHEL server and then DNS1.SERVERCODNS.COM and DNS2.SERVERCODNS.COM for say the windows? Is this going to cause problems?
Whats the difference or proper procedure for setting up DNS with my registrar (*ENOM) vs in the control panels they have Nameserver tools?
View 5 Replies
View Related
Aug 25, 2008
if it is possible to use more than 2 regular DNS entries across 2 hosts? So if a site goes down the other host picks it up?
View 12 Replies
View Related
Dec 3, 2008
I have a website.
I have it on 2 different servers.
This is because if the first server goes down for whatever reason, i dont want the site to go down.
To get this to work, is it just a case of adding more nameservers to the domain?...
becuase this doesnt seem to be working... the domain seems to always resolve to the server that is listed last in the list of nameservers...
View 6 Replies
View Related
Jan 31, 2008
Has anyway come up with a way to have several servers connected to one external CD-ROM on a USB Hub/network? This could allow a few external CD-DRIVES to handle a whole rack and the possibility of setting the bios via KVM/IP on a server to boot from CD, then it would boot from the CD tied in on the USB "network". Maybe using a USB hub? Or would this cause possible security issues having multiple servers tied in via USB ports?
I would love to have the ability to have maybe 3 or 4 CD-ROMs tied into multiple servers for OS installs remotely without having to actually go into the DC for this. You could put the CD-ROMs on your APC reboot and just turn on the one you need and set the bios to boot from CD (ie: one drive could have CentOS, one could have Windows, etc)
I'd be interested in some ways people have done this or what they use.
View 2 Replies
View Related
Mar 9, 2007
I have a firebox firewall and two servers. I don't one machine to see the other one the network. The servers are for two different clients. However I would like to be able to access a backup folder on Server 2 from Server 1. What is the best setup for this?
View 0 Replies
View Related
Mar 9, 2007
I have a firebox firewall and two servers. I don't one machine to see the other one the network. The servers are for two different clients. However I would like to be able to access a backup folder on Server 2 from Server 1. What is the best setup for this?
View 0 Replies
View Related
Jun 13, 2009
What is the best way to run one command on multiple servers. Security isnt too much of an issue as I'll be doing a master/slave type setup, with the master being a system in the office with no ext access.
I'm thinking pssh is going to be quick and easy, what do you use?
View 8 Replies
View Related
Jul 16, 2009
I have 2x servers with the following os/control panels:
1x Windows Server 2008 running Plesk 9.2
1x Centos 5.3 running cPanel/WHM
What I wish to do is to point all of my domains to the nameservers:
ns1.domain.com
ns2.domain.com
But, the domains hosted could be on either of the boxes above (because some sites are ASP.NET and others PHP).
Each of the above machines are running BIND and I have not yet setup nameservers on either of them. How should I proceed with this?
In addition (for arguments sake), if I then add additional servers how would I then achieve the same?
If there's already stuff around on the forum (I've done a search but found nothing specified to my issue of running a windows and linux box with completely different control panels) please point me in the right direction.
View 9 Replies
View Related
Jun 4, 2009
A website I am involved with may soon hit a problem due image uploading being stored on only one server. We are unable to find a realistic solution which would allow us to upload images from 1 central location.
The website is programmed in PHP and is on a standalone web-server - currently the images are uploaded to the same directory as the website however we are looking to move the images to another server for scalability.
Is it possible at all to upload using a directory link of some kind, eg, the directory would be /serverip/path/to/images which you would upload to? Or any other realistic approaches that you know off.
View 8 Replies
View Related
Nov 1, 2009
Is it possible to combine multiple servers via "Configure Cluster"? Will the hosting domains use same ns1.mydomain and ns2.mydomain.com if one server is located in UK and second is in USA Datacenter. Can somebody provide me information with explanation?
View 3 Replies
View Related
Nov 11, 2008
I purchased a domain, domain.com, from GoDaddy.
I have 5 servers, 2 running CentOS and Apache, 3 running Windows Server 2003 and IIS. Each server has it's own dedicated IP address, so I can access each site by going to [url]
Would I would like to be able to do is set each of these servers up with a subdomain on my domain.com. So I would have [url]going to one server, [url]going to another server, etc.
I logged into GoDaddy's Domain Manager. However, it appears that the only form of subdomains they have is redirection. So while I can create server1.domain.com, it merely redirects to [url]
I can mask the forward, but this creates problems with the login on the servers because they use cookies. In addition, the address always appears as [url], it doesn't have the "index.html" or "/login/login.aspx" when
I click links. The actual links appear as "[url] and not "[url]
Is there anything I can do? I want the subdomains to point to a particular IP address, not redirect.
View 4 Replies
View Related
Nov 26, 2008
I have a server with plesk8 installed. I forsee a time when I shall need either to move to a new bigger server or to add a new bigger server to what I already have.
Problem is, my isp says that PLESK will only work on single server set-ups and can't work in a multi-server environment.
View 2 Replies
View Related
Nov 10, 2007
I was talking to my host the other day about configuring multiple servers as a private LAN. I was wondering if anyone has successfully set up a configuration of using separate servers for each task for shared hosting accounts. I.E. Having certain servers as web servers and others dedicated as MySQL servers, e-commerce servers, mail servers etc.
Does anyone do this? I can see it boosting performance.
View 2 Replies
View Related
Apr 30, 2007
I run a small hosting company and i have been using multiple (different) nameservers for different servers, for example...
Nameserver IP
ns1a.domain.com 192.168.0.1
ns2a.domain.com 192.168.0.2
ns1b.domain.com 123.123.0.1
ns2b.domain.com 123.123.0.2
How do i make it so i can have ns1.domain.com and ns2.domain.com pointing to all different my servers?
View 2 Replies
View Related
Mar 6, 2007
I have been trying to setup SPF records for all of our hosting servers but need some assistance.
Lets say we have three servers with the following RDNS:
ns1.server.com
ns2.server.com
ns3.server.com
Would we create one SPF for server.com and add it to the DNS zones on each server?
Or should we create a separate SPF for each server?
View 4 Replies
View Related