Apache Server On Windows VPS

Jun 24, 2009

I recently had to move my site from Linux to Windows hosting because I was adding an application that requires ASP.NET. The problem is the server that it uses (Windows iis) makes other parts of my site not work.

So my programer recommended using an Apache server with my Windows VPS (or hosting - I have no specific preference of either VPS or hosting) -

Does anyone know a hosting company that does this? Offers Windows hosting with an Apache server?

View 1 Replies


ADVERTISEMENT

Running Apache On Windows Server

Oct 27, 2008

How stable is Apache for Windows XP Pro?

Can i get the mod_rewrite to work just fine?

Is this a good idea if im no linux buff, or should i just go ISS?

View 8 Replies View Related

Apache :: Remote Wamp Server On Windows Vps

Feb 8, 2015

i installed wampserver on my remote windows VPS.i opened port 80.after that i try to connect it by typing "h t t p : / / remotelink" on my local machine browser.but i can not connect.

View 4 Replies View Related

Apache :: 2.4.7 Not Answering On Windows Server 2012

Feb 12, 2014

So, here is my setup: a newly installed Windows Server 2012. The only software installed on it beyond the operating system is Apache 2.4.7 and PHP 2.4. The computer is in a LAN behind a router. The router tunnels port 80 to port 80 in this computer.

After I set up my website, everything was working perfectly: I could see the web pages from outside my LAN, PHP was executing, accesses were logged.

Then after a couple days, I could not open the pages from outside the LAN. From within the LAN, I could open them sometimes and sometimes they wouldn't.

Some facts:

From within the server itself, I can open all pages.

If I telnet to port 80 either from within the LAN or from outside, a few times the port would answer but wouldn't serve the GET request, while other times it just does not reply.

Netstat shows port 80 binded to httpd.exe.

If I make the router tunnel port 80 to another computer in the LAN, I can serve pages from this other computer, so it doesn't seem like the router is the problem.

The server does not answer to vpn connect attempts either. It does open connections to Remote Desktop, however, even from outside the LAN (both ports tunnelled by the router).

I have tried all this both with Windows Firewall activated and not activated. I have also checked the rules, and the only rule that mentions port 80 is the one for Apache, and is set to allow all.

No error messages are reported in Apache logs.

Restarting the server did not seem to make a difference.

View 3 Replies View Related

Apache :: Number Of Fcgid Processes On Windows Server

Oct 10, 2013

I'm new to fcgid on Windows. my current set up is as follows;

Windows Server 2008
Apache 2.4.4
PHP 5.3.27 (fcgid)
MySQL 5.6.14

1. Looking at windows task manager, each of my processes have 4 threads each. What does this mean?

2. Does the number of FcgidMaxProcesses x memory_limit = Total amount of memory required?

3. Number of Threadsperchild = number of FcgidMaxProcesses ?

I just want to know how these two work together.

View 18 Replies View Related

Steps To Get EMail Working On A Home Server (Windows, Apache)

Oct 25, 2007

What else do I have to do?

I don't understand.

Please see attached screen-shots.
[url]
[url]
[url]
[url]

View 1 Replies View Related

Apache :: Generate Crash Dump In Windows 2008 Server R2

Sep 5, 2014

generate crash dumps for apache 2.4.9 at the time freeze or crash in windows environment 2008 server R2.

View 2 Replies View Related

Windows Licenses :: Rent Windows Server 2003 Web Edition?

Nov 17, 2008

Any company rent Windows Server 2003 Web Edition ?

SPLA and External licenses ?

With Micfrosoft need pay 2,000$

I wait your answerds.

View 3 Replies View Related

Windows And Apache

Aug 14, 2009

i know some persones just like Xamp and some other program that do the hard work for you

but i was wondering what the best program is?

at this moment i got a custom install of apache and mysql , it is this way that it create his own disk

so the folders looks like /www for the webstie
and /usr/local/mysql for mysql and so

just like linux , but then on windows

but i am not sure if this is good , or that Xamp or Wamp is better to use on windows?

View 7 Replies View Related

Windows 2008 Versus Windows 2003 Server

May 26, 2009

With Windows 2003 server, there are comprehensive lists of what you need to do to secure the server before use. For Windows 2008, I wonder is there such a list? Or is it true as what I heard from Microsoft that it is already secured out of the box?

Anyone has any resources on the hardening or preparation of 2008 for server hosting uses?

View 1 Replies View Related

Apache, Windows, Konsole - H

Mar 26, 2008

I have begun setting up my webserver on a windows machine with apache 2.2

i`m a bit of a beginner in this so basically i'm asking if you are able to point me in the right direction. what i would like to do is:

1. have one dedicated server (im on a satellite connection, i have multiple static IP's on this connection)

2. Have it host my own website (forums, chat rooms, databases)
and possibly more websites in the future

3. on this same connection will be other users that will use the internet connection as normal(basic "home users")

4. i dont know what software to use really, i have used Konsole H before with my previous host and that looks cool but i`m unsure on how i would implement something like this.

5. i would like to setup my personal hosting enviroment as a profesional hosting enviroment would have it. all hosted on windows. all i`m aware of is apache. how do i get this off the ground.

View 0 Replies View Related

Configuring Apache With SSL On Windows

Oct 28, 2008

i couldn't find a more suitable category to put this post in: I am setting up a development server local to my office here, so that we can develop projects using an SVN app, but the SVN system needs SSL for logging in. i am now going round in circles where httpd.exe cannot start as a service from the apache monitor, with the following error:

The Apache service named reported the following error:
>>> httpd.exe: Could not reliably determine the server's fully qualified domain name, using 192.168.1.84 for ServerName
in the windows event viewer.

I'm using:
Windows XP Home edition, SP3
Apache 2.2.9
full computer name is devserver
workgroup is WORKGROUP

I used openssl bundled with this version of apache to generate the SSL certificate, and they all seem to be ok. When i change the line

SSLEngine on

in the httpd-ssl.conf file, the apache service starts when the SSLEngine is off, but not when the SSLEngine is on.

i have trawled the internet but not found any answer. ive checked thru httpd.conf and httpd-ssl.conf several times but i just can't see anything wrong (although im not entirely experienced!).

View 4 Replies View Related

Apache :: Uninstalling 2.2 On Windows 7

Aug 11, 2013

I cannot uninstalling Apache 2.2 from my Win7 PC.First of all it is not listed in the add/remove programs and second there is not a bin file in the folders.The only folders I find are conf, htdocs and logs.Currently I use Apache 2.4. Apache 2.2 is useless to me as you understand and so the service is stopped-as such I want to remove it from the system.

View 5 Replies View Related

Apache :: Windows CreateSemaphore In CGI

Jul 10, 2013

I am trying to use the Windows CreateSemaphore in a C++ CGI function to provide protection against multi-write-access to a file (within the webserver address space) by multiple instances of my CGI program. I guess I have 3 questions:

1. Will APACHE prevent the multi-access for me?

2. Can I get Apache to prevent multiple instances of the CGI from running at the same time (they are VERY short (millisec long) programs

3. If the answers to the above 2 are "no", can I get support on using CreateSemaphore, because mine always return NULL? (I've tried simple examples with no DACL, unnamed semaphore, etc.)

View 2 Replies View Related

Apache :: 2.4.10 Not Responding On Windows?

Dec 2, 2014

recently I have update our Apache 2.2 instance to 2.4.10, and started using Apache in Windows 2008 R2 64 bit (before we were using it in Win 2003). Our Apache is used mainly as reverse proxy to 3 apps. Well, it seems that, even if I have scheduled a nightly reboot of its service, every day it hangs, becoming unresponsive and forcing us to restart it to make it work again.

View 2 Replies View Related

Apache :: Windows LDAP And SSL

Oct 19, 2012

I have Apache 2.2.17 running on Windows 7. I'm using PHP to query a Windows 2008 LDAP server. Everything works ok until I try to use LDAPS. Many of the resources I can find refer to a ldap.conf file and the certificates being the main problem. I don't have an ldap.conf file anywhere, so I put all of the relevant lines in the httpd.conf.

I'm getting from the 2008 AD server. I haven't found any tutorial that covers it with an implementation in Apache on Windows. Many tutorials cover using LDAP to authenticate to the site, but I need to use it for queries. I used the procedure at URL... to get the certificate installed and exported. But I don't know a way to confirm that it's using the cert I think it is for LDAPS. All LDAPS tests work (LDP.EXE from Windows).

View 19 Replies View Related

Cache Systems For Apache In Windows

Mar 27, 2009

I have a fair ammount of load on the server, and I want to cache as much as possible to reduce disk IO. The harddrive is a major bottleneck for performance. The server serve a lot of files larger than 10MB, so I want to cache as much of the files below 10mb as possible.

First off I want to cache around 200k thumbnail files, where around 1000 new gets added every day.

Secondly it would be preferred to cache dynamic files in a way that the file timestamp is checked at a regular interval, and then read again if timestamp has changed.

Is there any free solutions on windows with apache for this?

View 5 Replies View Related

Apache :: SPDY Implementation For Windows With 2.4.7?

Nov 23, 2013

Is there any chance for a SPDY implementation for Windows now?

View 1 Replies View Related

Apache :: 2.2.25 - Subdomain Configuration In Windows 7

May 4, 2014

In my computer (Windows 7 Ultimate) I host my sites with Apache 2.2.25 - mod_fcgid-2.3.6-win32-x86 and PHP 5.4.28. In "httpd-vhosts.conf" file from Apache I have my domain set as follows and work fine (http://www.example.com or http://example.com):

Code:
<VirtualHost *:80>
ServerAdmin webmaster@example.com
DocumentRoot "D:/Apache22/vhosts/Example"
ServerName example.com
ServerAlias www.example.com *.example.com

[Code] ....

And I set up a subdomain as follows:

Code:
<VirtualHost *:80>
ServerAdmin director@example.com
DocumentRoot "D:/Apache22/vhosts/DirectorExample"
ServerName director.example.com
ServerAlias www.director.example.com *.director.example.com

[Code] .....

But when I tried to access the page: http://www.director.example.com or http://director.example.com, I was redirected to the page http://www.example.com.

I have DNS configured for "example.com" and "director.example.com". This sites is live in another server.

Error.log files for "director.example.com" and Apache is empty. How can I configure the subdomain to work?

View 2 Replies View Related

How To Set Max Number Of Connections In Apache (on Windows 7)

Apr 11, 2013

I am trying to figure out how Apache is working on windows 7 - so far so good - but how do I set restrictions and limitations on bandwidth usage and max number of IP-connections?

View 1 Replies View Related

Apache :: Not Starting After Windows 8.1 Update

Apr 5, 2014

My Apache server not starting after Window 8.1 update.Read some solutions that it might have conflict with skype, i have uninstalled skype still same problem.

Apache Version 2.4.7 (win 32)
Php version 5.5.5

View 5 Replies View Related

Apache 2.2 Windows Virtual Hosts

Jun 24, 2013

Ok so I just installed apache 2.2 on windows server 2008.

I would like to set it up so if I go to 99.144.79.25(Server IP) I get index1.html. If I go to example.com which points to 99.144.79.25 I get index2.html. If I go to example3.com which points to 99.144.79.25 I get index3.html.

So kind of like, if the domain folder is not found on my server, give the page index1.html.

In the long run I want to run a bunch of sites with different domains, testing right now though. 

View 1 Replies View Related

How To Setup Frontpage Extensions For Apache On Windows

Feb 7, 2008

Does anyone know how to install the Frontpage Server Extensions on an Apache server which is running on a Windows box? I've searched around including on Microsoft's site, but I was only able to find info on how to configure for Apache running on unix/linux.

View 0 Replies View Related

Apache :: Windows - How To Configure 1 Process Per Client

Sep 19, 2014

I've got a quite difficult problem which I don't know hoe to solve. We use a self created ISAPI module which is a "business server" running behind an Apache.

From time to time a client app crashes the server (the circumstances are not quite clear) - and because there is only one server process, all other clients crash as well. Here is an exemplary log of a crash:

Faulting application name: httpd.exe, version: 2.2.22.0, time stamp: 0x4f242d7a
Faulting module name: ABCServer.dll, version: 1.0.0.1, time stamp: 0x53cfffa5
Exception code: 0xc00000fd
Fault offset: 0x00004cf6
Faulting process id: 0x94c
Faulting application start time: 0x01cfc5cc18c67d57
Faulting application path: C:Program Files (x86)Apache Software FoundationApache2.2inhttpd.exe
Faulting module path: C:datawwwabcremoteABCServer.dll
Report Id: d27d5891-31da-11e4-93ff-0003ff4356f9
Faulting package full name:
Faulting package-relative application ID:

Exception code: 0xc00000fd means stack overflow as I learnt. Therefore we configured mpm_winnt_module to use a 8M ThreadStackSize but this didn't work.

A solution might be that Apache starts for every client its own server process with the module ABCServer.dll. Because it is quite small and there are not thousands of customers this sounds like the perfect solution. No other clients/customers would be affected by a crash.

Unfortunately mpm_winnt_module supports only 1 process AFAIK. Worker and Prefork MPM are not available in Apache's Windows version what I read.

How can we configure Apache to start a new module process per client?

View 3 Replies View Related

Apache :: Get Current CPU Usage From Mod Status On Windows?

Mar 19, 2014

Is it possible to get current CPU usage from mod_status on Windows? I thought it's ExtendedStatus On directive required but still no CPU usage.

View 7 Replies View Related

Apache :: 2.4.9 For Windows With Multiple Virtual Hosts

Jun 5, 2014

I have my Apache 2.4.9 for Windows with multiple Virtual Hosts, the main one is configure like this:

Code:
NameVirtualHost vhost1.domain.org:80
<VirtualHost vhost1.domain.org:80>
ServerName vhost1.domain.org
DocumentRoot "C:/Apache24/htdocs"
ServerAdmin techsupport@domain.org
# ErrorLog "logs/vhost1.domain.org-error.log"
# CustomLog "logs/vhost1.domain.org-access.log" common
</VirtualHost>

The rest like this:

Code:
NameVirtualHost vhost2.domain.org:80
<VirtualHost vhost2.domain.org:80>
ServerName vhost2.domain.org
DocumentRoot "C:/Apache24/htdocs/vhost2"
ServerAdmin techsupport@domain.org
# ErrorLog "logs/vhost2.domain.org-error.log"
# CustomLog "logs/vhost2.domain.org-access.log" common
</VirtualHost>

There is no *:80 anywhere and still when I go to any vhost it always load the main one.

What else do I need to check?

View 19 Replies View Related

Apache :: Dev / Random For SSL Encryption Seeding On Windows

Jun 25, 2014

What's the go with seeding the PRNG on windows as there isn't dev/random or dev/urandom? Should I use CryptoAPI or just use a file with random contents and change it often, or just leave the PRNG to "almost" randomise itself?

View 1 Replies View Related

Apache :: Unable To Start As Service - Windows 8

Jan 6, 2013

Installed Apache Server 2.4.3 (no PHP, etc.) and it was working beautifully for a week or so. Yesterday, I restarted my laptop (nothing changed... no updates that install automatically, etc.) and now Apache won't start. Here are some things I've found out on my quest on figuring out what's wrong:

1. Apache Error Log:
[Sat Jan 05 14:18:36.745977 2013] [mpm_winnt:notice] [pid 4116:tid 372] AH00455: Apache/2.4.3 (Win64) configured -- resuming normal operations
[Sat Jan 05 14:18:36.745977 2013] [mpm_winnt:notice] [pid 4116:tid 372] AH00456: Server built: Aug 18 2012 14:13:48
[Sat Jan 05 14:18:36.745977 2013] [core:notice] [pid 4116:tid 372] AH00094: Command line: 'C:Apache24inhttpd.exe -d C:/Apache24'
[Sat Jan 05 14:18:36.747979 2013] [mpm_winnt:notice] [pid 4116:tid 372] AH00418: Parent: Created child process 3436
[Sat Jan 05 14:18:37.335418 2013] [mpm_winnt:crit] [pid 4116:tid 372] AH00419: master_main: create child process failed. Exiting.

2. Nothing else is using port 80 (or 443, for that matter).

3. Apache will start and stay running if I run httpd.exe from the DOS prompt or double-click it from within Windows just fine.

4. Will not run when launched from within the Services or Apache Service Monitor app.

5. Windows Event Error displays the following error:
Faulting application name: httpd.exe, version: 2.4.3.0, time stamp: 0x502f863e
Faulting module name: MSVCR100.dll, version: 10.0.40219.325, time stamp: 0x4df2bcac
Exception code: 0xc0000417
Fault offset: 0x0000000000070468
Faulting process id: 0x13d8
Faulting application start time: 0x01cdeb8eefaec475
Faulting application path: C:Apache24inhttpd.exe
Faulting module path: C:WindowsSYSTEM32MSVCR100.dll
Report Id: 2deab70b-5782-11e2-be94-00247e17b5d9
Faulting package full name:
Faulting package-relative application ID:

6. I've tried fixing/reinstalling the C+ redistribution files about 3 times now, to no avail (thinking the error in the event file was caused by a bad/corrupt MSVCR100.DLL).

7. The exception code in the event error is:
0xc0000417 = STATUS_INVALID_CRUNTIME_PARAMETER =
An invalid parameter was passed to a C runtime function. (But again, reloading the files didn't solve anything).

8. I have tried removing Apache completely, reloading with default settings, etc. and still having the same issue.

9. Out of desperation, I even tried a registry cleaner (CCClean) and CHKDSK on the drive. Both of those didn't fix anything.

This is it... not sure what else to do/try. Again, everything was fine one moment, and it all stopped working after rebooting my system. I've wasted hours into this issue, and have come up empty handed. I'm beyond frustrated at the moment.

EDIT: The download I used for the server is located here: [URL]...

View 1 Replies View Related

Windows Share Hosting Support Apache Php Mysql?

Apr 24, 2008

which windows share hosting support apache php mysql?

View 7 Replies View Related

Apache :: Blocking / Slow On Local Windows-system

Feb 15, 2013

I have a website on a linux-server working fine with PHP/Apache. The page loads a lot of css/js/image-stuff (total 84 requests, 220k), it takes about 4 secs to load via internet.

Now I'm testing the same page locally on a Win7-64-system (Apache 2.2, PHP 5.4). The system is not very slow (8 GB RAM, SSD, i7-CPU), but loading the same page as above takes about 50 secs.

The Q is: What might be the problem?

- I turned off firewall and anti-virus.

- I used mod_status: 150 threads, max. 11 seems to be used during the loading of the page.

- I tried php5apache2_2.dll with TS-PHP 5.4 and mod_fcgid.so with NTS-PHP 5.4, but the loading-time kept almost the same.

Looking at the "network-tab" in FF or Chrome, I found that a lot of subqueries get a timing like this:

Blocking: 11.96 s
Sending: 0
Waiting: 1 ms
Receiving: 6ms

So the loss of time seem to be in the "blocking"-section. I first thought of something like "limited number of TCP-Connections", but as said above, on the same system the page is remotly loaded fast enough almost without these "blocking"-parts.

View 3 Replies View Related

Apache :: 2.2.22 - Unable To Send HTTP PUT Command In Windows

Apr 19, 2013

I have installed Apache 2.2.22 in Windows Server 2008 R2 Operating System. I want to upload a file using HTTP put command to "uploadtest" folder of the server

1. I have configured "uploattest" folder to accept file without any authentication (Anonymous_NoUserID On)

<IfModule alias_module>
Alias uploadtest G:DataImportSvcUploadTest
</IfModule>
<Directory "G:DataImportSvcUploadTest">
<FilesMatch ".(enc|xml|zip)$">

[Code] ....

We are using .enc files so I allowed that file type

2. "uploadtest" folder has right permission to everybody.

3. We are using WindowsCE client to send file using HTTP put command . Use HttpOpenRequest to send files with lpszVerb = PUT

HINTERNET WINAPI HttpOpenRequest(
HINTERNET hConnect,
LPCTSTR lpszVerb,
LPCTSTR lpszObjectName,
LPCTSTR lpszVersion,
LPCTSTR lpszReferrer,
LPCTSTR* lplpszAcceptTypes,
DWORD dwFlags,
DWORD dwContext
);

4. We are getting error as "Method Not Allowed"

TTP/1.1 405 Method Not Allowed
Date: Thu, 18 Apr 2013 07:26:25 GMT
Server: Apache/2.2.22 (Win32) DAV/2
Allow: GET,HEAD,POST,OPTIONS,TRACE
Content-Length: 241
Content-Type: text/html; charset=iso-8859-1

5. I tried enable WebDav in Apache and tried with BitKinex WebDav client and still gives the same error

I just wondering PUT may be barred by any other allowed module. Please find the modules allowed.

LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_basic_module modules/mod_auth_basic.so

[Code] .....

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved