Apache :: Number Of Fcgid Processes On Windows Server
Oct 10, 2013
I'm new to fcgid on Windows. my current set up is as follows;
Windows Server 2008
Apache 2.4.4
PHP 5.3.27 (fcgid)
MySQL 5.6.14
1. Looking at windows task manager, each of my processes have 4 threads each. What does this mean?
2. Does the number of FcgidMaxProcesses x memory_limit = Total amount of memory required?
3. Number of Threadsperchild = number of FcgidMaxProcesses ?
I just want to know how these two work together.
View 18 Replies
ADVERTISEMENT
Jul 10, 2009
I just recently switched to using fcgid with cPanel and was wondering how I can go about seeing what is actually running under each process. Before when I was running PHP as CGI I could do psauxwe|grep PID and see all the environmental variables along with the path. I'm not able to do that any longer with fcgid. Is there anyway to get this info now?
View 2 Replies
View Related
Mar 30, 2007
I have small issue with load speed of pages when number of apache running processes goes over +-310, during peak traffic of day. IE: They load really slow.
Here's pic of what I mean:
=> [url]
Only thing that fixes it temporarily (at least until peak traffic ends) is to stop either httpd or mysql for several seconds, as everything cools down, then start it back up. Stop/starting mysql usually has longer terms temporary fix.
Anyway, would you have any ideas on what to configure or change within the system in order to keep the processes under 300?
The load is normal. Even at load 40, pages are blistering fast, as long as processes are under 300. So it's got nothing to do with load.
View 8 Replies
View Related
May 17, 2014
Our server is running; Plesk 11.0.9 and CentOS 5.7 it has a Q8200 CPU @ 2.33GHz and 2GB of RAM. Now there are just two websites on the server plus a couple of redirects/forwarding domains, although lots of domains are still on the server but turned off in Plesk. Both websites are OSCommerce sites and I just need to keep these sites going until the end of the year when we will switch to our new Joomla based website.
We have seen an increasing number of server crashes and after various checks of the logs, fitting a new BIOS battery, check of the hardware by EasySpace who host the server, installation of ClamAV, LMD and RKHunter (which did find some Trojans and Suspect software), I have traced it down to some external Http activity that is taking all of my CPU time and RAM. Here is a screen capture of the Htop listing and when I killed these processes the CPU and RAM went back to normal. The problem is that I usually have to restart the HTTPD service and sometimes things get so bad that the server crashes and I have to request a power cycle.
View 8 Replies
View Related
Apr 11, 2013
I am trying to figure out how Apache is working on windows 7 - so far so good - but how do I set restrictions and limitations on bandwidth usage and max number of IP-connections?
View 1 Replies
View Related
Mar 22, 2008
I do a ps aux, and get a bunch of:
/usr/sbin/httpd
Each one takes up like 4% of the available ram - and when the ram is gone, the server dies (it doesn't have a swap file - half the time you can't even log in to it), and you have to reboot Apache.
I thought of limiting maxchilds, but would that break something else?
Should I just make a swap file? Will that defeat the point of creating child processes?
View 6 Replies
View Related
Apr 24, 2007
I have 2 almost similar webservers:
debian 3.2, P4 3GHZ, 1 Gb ram, kernel 2.6, apache2, php4
Initial apache2.conf:
Code:
Timeout 4
KeepAlive Off
KeepAliveTimeout 2
ServerLimit 1500
<IfModule prefork.c>
StartServers 10
MinSpareServers 10
MaxSpareServers 15
MaxClients 1500
MaxRequestsPerChild 3000
</IfModule>
I update the sources.list on server 1 to mirrors of the new debian 4 etc . I run apt-get update and apt-get dist-upgrade . A whole bunch of things get updated (it was long time ago that I did this anyway). After some troubles with /boot/grub/menu.lst the server boots ok, and everything is well. This server used to have loads of 15-25 at peak times, but after the update its running very smooth with loads of 2-3 at the same peak times. I dont know why exactly, as I noticed updates in OS , kernel version (from 2.6.8x to 2.6.18) , apache2 , php (4.4.4-8+etch1) , and I also needed to update eaccelerator from 0.94 to 0.95 .
A few days later I update server 2. Everything seems to go the same, although the kernel version stays at 2.6.8-3-686. I dont think kernel version at start was exactly same at server 1. But the new php version is the same as server 1, and everything else looks the same too.
But when peak times are coming up, this server starts to have troubles. It is quickly rising to total of 200-300 processes , while server 1 always stays stable at 60-70.
Server 2 also reacts slow if I click somewhere on the site. It takes 5-10 seconds to show a new page. However the load stays pretty low at 1-2 . I see no big cpu usage and also no big memory usage. I have the impression that this server 2 is somehow wasting a lot of apache processes and is making things hard for itself without a real reason.
When I check the seperate mysql database server, I also notice a lot of processes.
Around 200-250 whereas it used to be 40-60. Sometimes this adds up so hard, that all webservers are blocked because mysql has too much processes. When I check the mysql connections, I see a few dozen things like 'unauthen ip:port Connect login' just hanging. All of them have the ip of webserver 2. Those extra apache processes are somehow hanging on to the mysql server without really doing something.
I dont know what is happening, but this server is underperforming very badly now. I managed to limit the problem by drastically lowering ServerLimit and MaxClients on webserver 2 , but this is no real solution. The server is still slow, at least now its not bringing down the others.
My question : what should I check for now ? I noticed a different structure in the conf files in debian etch, maybe something new has a bad influence on my old conf files? Is there something wrong with the combination of kernel+php version? I have no idea, please point me in the right direction so I can learn from this.
View 4 Replies
View Related
Feb 13, 2007
I'm not sure I understand the server-status page enough to know if this is a problem or not, but I have several processes that seem to run forever, or until I restart Apache. e.g.
Code:
13-1 21045 0/697/4264 W 59.45 19641 0 0.0 43.28 274.97 66.249.66.133 www.example.com GET /wp/2005/01/ HTTP/1.1
19-1 408 1/834/1831 C 83.52 32463 0 14.8 149.66 263.48 66.249.66.133 www.example.com GET /wp/ HTTP/1.1
30-1 14416 0/430/431 W 35.19 13347 0 0.0 37.42 37.44 66.249.66.133 www.example.com GET /wp/category/issues/ HTTP/1.1
They are almost always on a single domain (there's about 100 on the server) that's a Wordpress site. These processes are also almost always a search engine.
On the rare case I see them running on other domains on the same server they're always on Wordpress sites.
The longer the processes run, the more processor/memory they use, the more they slow the server down.
It seems to have just started in the past few weeks, I've had the site there for a couple years.
View 2 Replies
View Related
Apr 7, 2014
I am interested to know number of current connections in my Apache server
Server version: Apache/2.2.15 (UNIX)
OS : Solaris 5.10
View 5 Replies
View Related
Apr 3, 2014
I administer an Apache server under unix environment SunOS 5.10,I want to know the number of clients connected to my apache server
View 7 Replies
View Related
Oct 5, 2007
I'm new to Private Virtual Server and the package offered by different company are quite confusing.
I was on RackForce and their basis VPS package dds200-L can host 100 domain names on Plesk and unlimited domain names on WHM/Cpanel.
On 1and1 it didn't say if Plesk support 100 or unlimited domain names. My question is, do we always have the liberty to host unlimited domain names on our PVS?
Can anyone recommend a good VPS hosting company?
View 14 Replies
View Related
May 1, 2009
I have some problems with apache.
As you can see below, long-live httpd processes use a lot of CPU / Ram.
Usually this processes caused high LA - 8-12.
Code:
%CPU CPU NI S TIME COMMAND
0.2 - 0 S 00:00:27 nginx: worker process
0.3 - 0 S 00:00:29 nginx: worker process
0.3 - 0 S 00:00:30 nginx: worker process
3.3 - 0 S 00:04:09 /usr/local/apache/bin/httpd -k start -DSSL
3.4 - 0 S 00:04:16 /usr/local/apache/bin/httpd -k start -DSSL
3.5 - 0 S 00:05:50 /usr/local/apache/bin/httpd -k start -DSSL
3.6 - 0 S 00:05:40 /usr/local/apache/bin/httpd -k start -DSSL
3.6 - 0 S 00:05:16 /usr/local/apache/bin/httpd -k start -DSSL
3.6 - 0 S 00:06:04 /usr/local/apache/bin/httpd -k start -DSSL
3.7 - 0 S 00:06:06 /usr/local/apache/bin/httpd -k start -DSSL
3.7 - 0 S 00:00:55 /usr/local/apache/bin/httpd -k start -DSSL
3.7 - 0 S 00:06:10 /usr/local/apache/bin/httpd -k start -DSSL
3.7 - 0 S 00:06:10 /usr/local/apache/bin/httpd -k start -DSSL
3.7 - 0 S 00:06:10 /usr/local/apache/bin/httpd -k start -DSSL
3.8 - 0 S 00:06:12 /usr/local/apache/bin/httpd -k start -DSSL
3.8 - 0 S 00:05:40 /usr/local/apache/bin/httpd -k start -DSSL
3.9 - 0 S 00:06:28 /usr/local/apache/bin/httpd -k start -DSSL
View 6 Replies
View Related
Jan 14, 2015
Apache keeps increasing processes and when it reaches 256 value, it crashes. These are the values from our conf file. This doenst happen everyday, it occurs once or twice a week and at random timing.
Timeout 120
KeepAlive Off
MaxKeepAliveRequests 100
KeepAliveTimeout 15
<IfModule prefork.c>
StartServers 8
MinSpareServers 5
MaxSpareServers 20
ServerLimit 256
MaxClients 256
MaxRequestsPerChild 4000
</IfModule>
I enabled server-status and found request for index.html, is holding the processes. Only thing i see in access logs is ""OPTIONS * HTTP/1.0" 200 - "-" "Apache (internal dummy connection)""
View 1 Replies
View Related
May 7, 2008
Curious to know the maximum number of sql server databases you guys have seen on a single server box?
View 0 Replies
View Related
Feb 24, 2007
I would like to know what is the maximum number of Apache connections a Server can handle? Does this depends on the Config of the Server? Is it Possible for a server to handle more than 2500 Active Apache connections without timeout / connection failure / slowness?
View 6 Replies
View Related
Nov 18, 2014
I implemented a Reverse Proxy using apache2 v. 2.4... What i need to do is limit number of sessions against a Virtual Host. Is that possible?
View 13 Replies
View Related
May 20, 2015
I use url http://myurl:8020/ERC to access application and I am able to. But I dont want to use port number in the URL.Would like to access application using http://myurl/ERC . I referred to one of the post and added below entries to httpd.conf file.
ProxyRequests Off
ProxyPass /ERC http://myurl:8020/ERC
ProxyPassReverse /ERC http://myurl:8020/ERC
But I am still not able to access http://myurl/ERC.LoadModule entries are enabled and I have restarted apache.
View 3 Replies
View Related
Mar 2, 2009
I am initiating this poll to see how many number of Windows VPS plans are sold every month by an average windows vps hosting company?
Only serious members, already selling windows vps hosting should participate in this poll.
View 1 Replies
View Related
Oct 27, 2009
Cpanel have option for compile with limit number access from IP via apache?
I want earch IP can access 5 conection in apache.
Via cpanel is possible?
View 6 Replies
View Related
Nov 13, 2008
I am facing to this trouble: apache max out the number of connections. When viewing status, all I get here
Code:
SrvPIDAccMCPU SSReqConnChildSlotClientVHostRequest
0-028240/6/65R 0.1414290.00.020.32 ??..reading..
1-028170/17/65R 0.111510.00.030.22 ??..reading..
2-028350/3/57R 0.20112210.00.000.24 ??..reading..
3-027570/33/62R 1.431412930.00.130.21 ??..reading..
4-026430/75/75R 2.12153190.00.310.31 ??..reading..
5-026440/52/52R 2.061610.00.240.24 ??..reading..
6-028180/13/60R 0.621600.00.070.22 ??..reading..
7-026490/63/63R 2.84143070.00.370.37 ??..reading..
8-028190/7/43R 0.271610.00.020.27 ??..reading..
9-028080/27/76R 0.361410.00.040.29 ??..reading..
10-026750/50/52R 2.9617630.00.260.26 ??..reading..
11-027720/23/49R 3.641600.00.100.19 ??..reading..
12-026620/64/64R 2.201520.00.290.29 ??..reading..
13-027730/25/64R 1.121500.00.140.19 ??..reading..
which account on server is the reason please? I am on CentOS box with DirectAdmin.
View 2 Replies
View Related
Dec 29, 2014
I have installed apache 2.4.10 with tomcat-7 as backend .Proxypass has been added in apache to access tomcat via http port .now requirement is to restrict each Context to 100 sessions only , how i need to achieve this .
View 1 Replies
View Related
Jul 11, 2014
Is it possible to limit the max number of concurrent access to an url?
Let's see the following example: URL...
/a1 concurrent access should be limited to for example 20.
While we have an other url:
https:/ssss.com/a2
/a2 should be limited to 30.
Is it possible to do it with some apache config?
View 1 Replies
View Related
Aug 12, 2013
I would like to know how to change http://mydomainname.com:8880 to http://mydomainname.com/somethingelse?
View 4 Replies
View Related
Jan 30, 2014
Have to type the full address with port number....
View 4 Replies
View Related
Aug 27, 2013
I am attempting to install Apache HTTPD on a PC running Windows 7 Ultimate SP1.
VC9, VC10 & VC11 redistributables are installed.
When I attempt to start Apache - both from the command line and as a service - I receive the following error messages:
[Tue Aug 27 15:33:27.624800 2013] [mpm_winnt:notice] [pid 5192:tid 284] AH00455: Apache/2.4.6 (Win64) configured -- resuming normal operations
[Tue Aug 27 15:33:27.626800 2013] [mpm_winnt:notice] [pid 5192:tid 284] AH00456: Apache Lounge VC11 Server built: Jul 15 2013 20:45:22
[Tue Aug 27 15:33:27.626800 2013] [core:notice] [pid 5192:tid 284] AH00094: Command line: 'C:Apache24inhttpd.exe -d C:/Apache24'
[Tue Aug 27 15:33:27.667800 2013] [mpm_winnt:notice] [pid 5192:tid 284] AH00418: Parent: Created child process 7684
[Tue Aug 27 15:33:27.668800 2013] [mpm_winnt:debug] [pid 5192:tid 284] mpm_winnt.c(422): AH00402: Parent: Sent the scoreboard to the child
[Tue Aug 27 15:33:27.704800 2013] [:crit] [pid 7684] (-2146173818)Unknown error: AH00141: Could not initialize random number generator
[Tue Aug 27 15:33:27.709800 2013] [mpm_winnt:crit] [pid 5192:tid 284] AH00419: master_main: create child process failed. Exiting.
[Tue Aug 27 15:33:27.710800 2013] [core:info] [pid 5192:tid 284] AH00096: removed PID file C:/Apache24/logs/httpd.pid (pid=5192)
The Windows event viewer merely says that HTTPD stopped with an application-specific error #1.
I have also tried with SSL both enabled and commented out.
For what it is worth the message appears to be generated by the routine ap_init_rng in the server core.c module.
View 8 Replies
View Related
Oct 23, 2014
I am attempting to add a header to a number of requested urls i.e. domain/feeds/chicago, domain/feeds/*.I understand that this can be achieved by
•using mod_rewrite to set an environment variable
•using mod_headers to add a header based on the existence of an environment variable.
So far I can add the a new header thus Header add RSS_FEED_URL "Akamai-Edge-Control"
View 1 Replies
View Related
Jul 9, 2014
I have somewhere at 2000 domains.
I need to change path to vhost from W:host to D:vhost
I copied all files from W to D drive and created symbollinks. Now all files stored in D:vhost and symbollincs pointing to W:vhost.
If I will use reconfigurator, will it recopy existing files or just will skip them? Because I have millions files in my vhost dir
Also i thought about change drive letter in windows OS. It wil be enough to just stop IIS service and plesk services for switching disk letter?
Can i just some how say plesk that he should search all vhost files in D:vhost? With out process of copying files,becouse thay already exist there are.
View 2 Replies
View Related
Apr 13, 2008
My server has been crashing quite alot lately, it does have some high traffic sites on there but it has never really been this bad before. Today i noticed these in cpanel, what are they and is there anyway I can control them?
View 13 Replies
View Related
Apr 23, 2008
i am facing slight problem with one of my VPSes. It had happened earlier also but had got resolved automatically.
Please see this screenshot: [url]
i know that the server load is not that great to cause this much SWAP usage. i think this is because of the processes not getting killed.
UPDATE: here is the screenshot of my other server with the same provider. which is not really overloaded but i think is facing the same problem of processes not getting killed [url]
View 7 Replies
View Related
Nov 16, 2007
Code:
1(init)/sbin/init/init [3]����������������������������������������������������������������������������������������
2(ksoftirqd/0)/
3(events/0)/
4(khelper)/
5(kacpid)/
20(kblockd/0)/
38(pdflush)/
39(pdflush)/
41(aio/0)/
21(khubd)/
40(kswapd0)/
187(kseriod)/
301(kjournald)/
1345(udevd)/sbin/udevd/udevd�
1704(kauditd)/
1745(kmirrord)/
1975(kjournald)/
1976(kjournald)/
1977(kjournald)/
1978(kjournald)/
1979(kjournald)/
2668(syslogd)/sbin/syslogd/syslogd�-m�0�
2672(klogd)/sbin/klogd/klogd�-x�
2693(named)/usr/sbin/named/var/named/usr/sbin/named�-u�named�
2736(courierlogger)/usr/sbin/courierlogger//usr/sbin/courierlogger�-pid=/var/spool/authdaemon/pid�-facility=mail�-start�/usr/libexec/courier-authlib/authdaemond�
2737(authdaemond)/usr/libexec/courier-authlib/authdaemond//usr/libexec/courier-authlib/authdaemond�
2772(authdaemond)/usr/libexec/courier-authlib/authdaemond//usr/libexec/courier-authlib/authdaemond�
2773(authdaemond)/usr/libexec/courier-authlib/authdaemond//usr/libexec/courier-authlib/authdaemond�
2774(authdaemond)/usr/libexec/courier-authlib/authdaemond//usr/libexec/courier-authlib/authdaemond�
2775(authdaemond)/usr/libexec/courier-authlib/authdaemond//usr/libexec/courier-authlib/authdaemond�
2776(authdaemond)/usr/libexec/courier-authlib/authdaemond//usr/libexec/courier-authlib/authdaemond�
2814(smartd)/usr/sbin/smartd//usr/sbin/smartd�
2823(acpid)/usr/sbin/acpid//usr/sbin/acpid�
4454(sshd)/usr/sbin/sshd//usr/sbin/sshd�
4467(xinetd)/usr/sbin/xinetd/xinetd�-stayalive�-pidfile�/var/run/xinetd.pid�
4534(chkservd)/usr/bin/perl/chkservd
4545(courierlogger)/usr/sbin/courierlogger//usr/sbin/courierlogger�-pid=/var/run/imapd.pid�-start�-name=imapd�/usr/lib/courier-imap/libexec/couriertcpd�-address=0�-maxprocs=40�-maxperip=30�-nodnslookup�-noidentlookup�143�/usr/lib/courier-imap/sbin/imaplogin�/usr/lib/courier-imap/bin/imapd�Maildir�
4546(couriertcpd)/usr/lib/courier-imap/libexec/couriertcpd//usr/lib/courier-imap/libexec/couriertcpd�-address=0�-maxprocs=40�-maxperip=30�-nodnslookup�-noidentlookup�143�/usr/lib/courier-imap/sbin/imaplogin�/usr/lib/courier-imap/bin/imapd�Maildir�
4553(courierlogger)/usr/sbin/courierlogger//usr/sbin/courierlogger�-pid=/var/run/imapd-ssl.pid�-start�-name=imapd-ssl�/usr/lib/courier-imap/libexec/couriertcpd�-address=0�-maxprocs=40�-maxperip=30�-nodnslookup�-noidentlookup�993�/usr/lib/courier-imap/bin/couriertls�-server�-tcpd�/usr/lib/courier-imap/sbin/imaplogin�/usr/lib/courier-imap/bin/imapd�Maildir�
4554(couriertcpd)/usr/lib/courier-imap/libexec/couriertcpd//usr/lib/courier-imap/libexec/couriertcpd�-address=0�-maxprocs=40�-maxperip=30�-nodnslookup�-noidentlookup�993�/usr/lib/courier-imap/bin/couriertls�-server�-tcpd�/usr/lib/courier-imap/sbin/imaplogin�/usr/lib/courier-imap/bin/imapd�Maildir�
4559(courierlogger)/usr/sbin/courierlogger//usr/sbin/courierlogger�-pid=/var/run/pop3d.pid�-start�-name=pop3d�/usr/lib/courier-imap/libexec/couriertcpd�-address=0�-maxprocs=40�-maxperip=30�-nodnslookup�-noidentlookup�110�/usr/lib/courier-imap/sbin/pop3login�/usr/lib/courier-imap/bin/pop3d�Maildir�
4560(couriertcpd)/usr/lib/courier-imap/libexec/couriertcpd//usr/lib/courier-imap/libexec/couriertcpd�-address=0�-maxprocs=40�-maxperip=30�-nodnslookup�-noidentlookup�110�/usr/lib/courier-imap/sbin/pop3login�/usr/lib/courier-imap/bin/pop3d�Maildir�
4565(courierlogger)/usr/sbin/courierlogger//usr/sbin/courierlogger�-pid=/var/run/pop3d-ssl.pid�-start�-name=pop3d-ssl�/usr/lib/courier-imap/libexec/couriertcpd�-address=0�-maxprocs=40�-maxperip=30�-nodnslookup�-noidentlookup�995�/usr/lib/courier-imap/bin/couriertls�-server�-tcpd�/usr/lib/courier-imap/sbin/pop3login�/usr/lib/courier-imap/bin/pop3d�Maildir�
4566(couriertcpd)/usr/lib/courier-imap/libexec/couriertcpd//usr/lib/courier-imap/libexec/couriertcpd�-address=0�-maxprocs=40�-maxperip=30�-nodnslookup�-noidentlookup�995�/usr/lib/courier-imap/bin/couriertls�-server�-tcpd�/usr/lib/courier-imap/sbin/pop3login�/usr/lib/courier-imap/bin/pop3d�Maildir�
4644(clamd)/usr/sbin/clamd//usr/sbin/clamd�
4648(exim)/usr/sbin/exim/var/spool/exim/usr/sbin/exim�-bd�-oX�26�
4654(exim)/usr/sbin/exim/var/spool/exim/usr/sbin/exim�-bd�-q60m�
4658(exim)/usr/sbin/exim/var/spool/exim/usr/sbin/exim�-tls-on-connect�-bd�-oX�465�
4666(antirelayd)/usr/bin/perl/antirelayd
4752(spamd)/usr/bin/perl//usr/bin/spamd -d --allowed-ips=127.0.0.1 --pidfile=/var/run/spamd.pid --max-children=5
4762(spamd)/usr/bin/perl/spamd child
4763(spamd)/usr/bin/perl/spamd child
4826(pure-ftpd)/usr/sbin/pure-ftpd/pure-ftpd (SERVER)������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������
4829(pure-authd)/usr/sbin/pure-authd//usr/sbin/pure-authd�-s�/var/run/ftpd.sock�-r�/usr/sbin/pureauth�
4856(crond)/usr/sbin/crond/var/spoolcrond�
4874(httpd)/usr/local/apache/bin/httpd//usr/local/apache/bin/httpd�-k�start�-DSSL�
4877(xfs)/usr/X11R6/bin/xfs/xfs�-droppriv�-daemon�
4886(anacron)/usr/sbin/anacron/var/spool/anacronanacron�-s�
4969(httpd)/usr/local/apache/bin/httpd//usr/local/apache/bin/httpd�-k�start�-DSSL�
4995(httpd)/usr/local/apache/bin/httpd//usr/local/apache/bin/httpd�-k�start�-DSSL�
4998(httpd)/usr/local/apache/bin/httpd//usr/local/apache/bin/httpd�-k�start�-DSSL�
5001(httpd)/usr/local/apache/bin/httpd//usr/local/apache/bin/httpd�-k�start�-DSSL�
5004(httpd)/usr/local/apache/bin/httpd//usr/local/apache/bin/httpd�-k�start�-DSSL�
5005(httpd)/usr/local/apache/bin/httpd//usr/local/apache/bin/httpd�-k�start�-DSSL�
5034(httpd)/usr/local/apache/bin/httpd//usr/local/apache/bin/httpd�-k�start�-DSSL�
5083(cphulkd.pl)/usr/bin/perl/cPhulkd - processor
5105(cpdavd)/usr/bin/perl/cpdavd - accepting connections on 2077 and 2078
5116(cpbandwd)/usr/bin/perl/cpbandwd
5117(cpanellogd)/usr/bin/perl/cpanellogd - sleeping for logs
5154(mailmanctl)/usr/local/bin/python2.4/usr/local/cpanel/3rdparty/mailman/usr/local/bin/python2.4�/usr/local/cpanel/3rdparty/mailman/bin/mailmanctl�-s�start�
5155(python2.4)/usr/local/bin/python2.4/usr/local/cpanel/3rdparty/mailman/usr/local/bin/python2.4�/usr/local/cpanel/3rdparty/mailman/bin/qrunner�--runner=ArchRunner:0:1�-s�
5156(python2.4)/usr/local/bin/python2.4/usr/local/cpanel/3rdparty/mailman/usr/local/bin/python2.4�/usr/local/cpanel/3rdparty/mailman/bin/qrunner�--runner=BounceRunner:0:1�-s�
5157(python2.4)/usr/local/bin/python2.4/usr/local/cpanel/3rdparty/mailman/usr/local/bin/python2.4�/usr/local/cpanel/3rdparty/mailman/bin/qrunner�--runner=CommandRunner:0:1�-s�
5158(python2.4)/usr/local/bin/python2.4/usr/local/cpanel/3rdparty/mailman/usr/local/bin/python2.4�/usr/local/cpanel/3rdparty/mailman/bin/qrunner�--runner=IncomingRunner:0:1�-s�
5159(python2.4)/usr/local/bin/python2.4/usr/local/cpanel/3rdparty/mailman/usr/local/bin/python2.4�/usr/local/cpanel/3rdparty/mailman/bin/qrunner�--runner=NewsRunner:0:1�-s�
5160(python2.4)/usr/local/bin/python2.4/usr/local/cpanel/3rdparty/mailman/usr/local/bin/python2.4�/usr/local/cpanel/3rdparty/mailman/bin/qrunner�--runner=OutgoingRunner:0:1�-s�
5161(python2.4)/usr/local/bin/python2.4/usr/local/cpanel/3rdparty/mailman/usr/local/bin/python2.4�/usr/local/cpanel/3rdparty/mailman/bin/qrunner�--runner=VirginRunner:0:1�-s�
5162(python2.4)/usr/local/bin/python2.4/usr/local/cpanel/3rdparty/mailman/usr/local/bin/python2.4�/usr/local/cpanel/3rdparty/mailman/bin/qrunner�--runner=RetryRunner:0:1�-s�
5172(dbus-daemon-1)/usr/bin/dbus-daemon-1/dbus-daemon-1�--system�
5183(hald)/usr/sbin/hald/hald�
5194(mingetty)/sbin/mingetty//sbin/mingetty�tty1�
5195(mingetty)/sbin/mingetty//sbin/mingetty�tty2�
5196(mingetty)/sbin/mingetty//sbin/mingetty�tty3�
5197(mingetty)/sbin/mingetty//sbin/mingetty�tty4�
5198(mingetty)/sbin/mingetty//sbin/mingetty�tty5�
5199(mingetty)/sbin/mingetty//sbin/mingetty�tty6�
5806(cpsrvd-ssl)/usr/local/cpanel/cpsrvd-ssl/usr/local/cpanel/basecpsrvd - waiting for connections
5924(authProg)/usr/local/cpanel/bin/courier-auth//etc/authlib/authProg�
5959(mysqld_safe)/bin/bash/var/lib/bin/sh�/usr/bin/mysqld_safe�--datadir=/var/lib/mysql�--pid-file=/var/lib/mysql/tiny.dnsprotect.org.pid�
5994(mysqld)/usr/sbin/mysqld/var/lib/mysql/usr/sbin/mysqld�--basedir=/�--datadir=/var/lib/mysql�--user=mysql�--pid-file=/var/lib/mysql/tiny.dnsprotect.org.pid�--skip-external-locking�--socket=/var/lib/mysql/mysql.sock�
6081(httpd)/usr/local/apache/bin/httpd//usr/local/apache/bin/httpd�-k�start�-DSSL�
7291(httpd)/usr/local/apache/bin/httpd//usr/local/apache/bin/httpd�-k�start�-DSSL�
7293(mono)/opt/mono/bin/mono//opt/mono/bin/mono�/opt/mono/lib/mono/1.0/mod-mono-server.exe�--filename�/tmp/mod_mono_server_global�--nonstop�--master�
7298(httpd)/usr/local/apache/bin/httpd//usr/local/apache/bin/httpd�-k�start�-DSSL�
7740(eximstats)/usr/bin/perl/eximstats
7822(authProg)/usr/local/cpanel/bin/courier-auth//etc/authlib/authProg�
8527(authProg)/usr/local/cpanel/bin/courier-auth//etc/authlib/authProg�
9234(cpsrvd-ssl)/usr/local/cpanel/cpsrvd-ssl/usr/local/cpanel/whostmgr/docrootwhostmgrd - serving 81.104.99.97
9236(whostmgr)/usr/local/cpanel/whostmgr/bin/whostmgr/usr/local/cpanel/whostmgr/docroot/usr/local/cpanel/whostmgr/bin/whostmgr�./simpleps�
9237(simpleps)/usr/bin/perl/usr/local/cpanel/whostmgr/docroot/usr/bin/perl�/scripts/simpleps�--html�
Recently server been a lil unstable... unsure why.. only recent thing i've installed is eaccelerator thingy.
and It was a lil unstable before that..
View 7 Replies
View Related
