I have put up a WAMP server that is based on Apache2.4.4. I am trying to utilize the rotatelogs.exe to rotate my access log every night. I have this working on IBM HTTP installations. IBM's HTTP is based on Apache 2.2. why the CustomLog command is not working? The command under my Virtual Hosts that I am using is:
<VirtualHost *:80>
ServerName xxxxxxxx
DocumentRoot C:wampwww
[Code]....
In Plesk 11.5 I set log rotation to once a day and to keep 365 files. But I can only find 13 files (only one access_log) in /var/www/vhosts/mydomain/log. But Plesk tells me that 100 GB are used for the logs (the 13 files only have about 3 GB). Where are the files? In previous versions (before 11.5) I always had the files (named .1, .2 etc) in the same log directory.
View 3 Replies View RelatedI have WAMP Setup and configured correctly, and it's working just fine.
I have a DynDNS account and it is pointing to my WAN IP.
For instance if my friends or if I use proxy to load [url]it loads just fine.
But from my own browser when I try accessing [url]it doesn't work.
Is there any way I can fix this issue?
Basically I am trying to use a domain name to point to my pc. And use that domain name to test my website other than using [url]
I am trying to set up log rotation on my Apache Server on Windows 2008 using the rotatelogs.exe executable. I believe I am having issues because my directory path has spaces.
From my understanding, a full path is needed for the ErrorLog but not for the CustomLog
ErrorLog "|"C:/Program Files (x86)/Apache Software Foundation/Apache2/bin/rotatelogs.exe" "C:/Program Files (x86)/Apache Software Foundation/Apache2/logs/Error/Error_%Y-%M-%D.log" 86400"
CustomLog "|bin/rotatelogs.exe logs/Access/Access_%Y-%M-%D.log 86400" common
The error that I get is:
C:Program Files (x86)Apache Software FoundationApache2.2bin>httpd.exe -k start
The system cannot find the path specified.
I am using Wamp server 2.2.
I recently made some changes to the Apache configuration to allow me to make a virtual host for the Zendframework. the change i made were as follows:
<VirtualHost 127.0.0.1>
ServerName zendy
DocumentRoot "C:workspacezendypublic"
SetEnv APPLICATION_ENV "development"
<Directory "C:workspacezendypublic">
DirectoryIndex index.php
AllowOverride All
Order Deny,Allow
Allow from all
</Directory>
</VirtualHost>
Since these changes were made, my wamp server will not start up. the wamp bar remain red.
What I have to do to find out/trace where the fault is?
i installed wampserver on my remote windows VPS.i opened port 80.after that i try to connect it by typing "h t t p : / / remotelink" on my local machine browser.but i can not connect.
View 4 Replies View RelatedI have installed wamp for editing word press theme every thing is ok but when I create new data base and start configuring my wordpress project file optional message appear when I click submit what should I do ?
View 4 Replies View RelatedI'm running a WAMP server, hosting an internal website for my company's use.
Windows XP Home SP3
Apache 2.0
MySQL Server 5.5
PHP 5.?
Last night Microsoft Security Essentials froze while running a scan. I restarted the scan and it froze again, so I rebooted the server. Now Apache won't start, providing the following error ....
My linux host requires a few lines of codes in my .htaccess file to properly run my site.
However, these few lines of codes are not supported by my local Wamp on Win7.
Is there a way to add a "If Wamp Then not run these lines" in my htaccess file
So that I don't have to manually change the .htaccess file before upload/downloading the site between the two systems?
Problem detected!
19:58:32 [Apache] Port 80 in use by "Unable to open process" with PID 4!
19:58:32 [Apache] Apache WILL NOT start without the configured ports free!
19:58:32 [Apache] You need to uninstall/disable/reconfigure the blocking application
19:58:32 [Apache] or reconfigure Apache and the Control Panel to listen on a different port
19:58:32 [Apache] Attempting to start Apache app...
19:58:32 [Apache] Status change detected: running
19:58:33 [Apache] Status change detected: stopped
19:58:33 [Apache] Error: Apache shutdown unexpectedly.
19:58:33 [Apache] This may be due to a blocked port, missing dependencies,
19:58:33 [Apache] improper privileges, a crash, or a shutdown by another method.
19:58:33 [Apache] Press the Logs button to view error logs and check
19:58:33 [Apache] the Windows Event Viewer for more clues
19:58:33 [Apache] copy and post this
19:58:33 [Apache] entire log window on the forums
that is my error message I have changed skype's port from using port 80 and also uninstalled IIS from microsoft I have only installed xampp on its own without wamp server so that they dont conflict.
Followed the guide over at [url]to get proftpd setup.
It only lists ways to create a single upload directory and a single download directory.
Tried all possible ways to get a directory creating allowing read/write but so far unsuccessful.
how this can be acheived?
Here is my current config.
#start of config
<Directory /home/FTP-shared>
Umask 022 022
AllowOverwrite off
<Limit MKD STOR DELE XMKD RNRF RNTO RMD XRMD>
DenyAll
</Limit>
</Directory>
<Directory /home/FTP-shared/download/*>
Umask 022 022
AllowOverwrite off
<Limit MKD STOR DELE XMKD RNEF RNTO RMD XRMD>
DenyAll
</Limit>
</Directory>
<Directory> /home/FTP-shared/upload/>
Umask 022 022
AllowOverwrite on
<Limit READ RMD DELE>
DenyAll
</Limit>
<Limit STOR CWD MKD>
AllowAll
</Limit>
</Directory>
#end of config
/home/FTP-shared/read-write is the folder I want to be able to read and write data to.
ive just upgraded to Apache 2.2.6 today and ive found a problem. Im trying a new way of doing mass virtual hosting using mod macro.
<Macro vhost $domain $path>
<VirtualHost *>
VirtualDocumentRoot "$path/Web/"
ServerName $domain.spkweb.com
ErrorDocument 404 "drive:/folder/404.php"
php_admin_value open_basedir "$path/Web/;$path/Temp/"
php_admin_value upload_tmp_dir "$path/Temp/"
<Directory "$path/Web/">
Options FollowSymLinks
AllowOverride all
Allow from all
</Directory>
</VirtualHost>
</Macro>
Use vhost DJSmithy "drive:/Hosting/DJSmithy"
Mostly it works fine but if there is a 404 then i get a 403 permission denied error instead of the error page. the folder that contains the error page does have a <directory> bit for it and i even tried adding it into the virtual host but i get the same result.
if the file does exist then it loads like normal
can anyone see any problems with my config or do i have to do something diff for 2.2.6?
I had to switch to Apache 2 from Lighttpd and I'm running into a little bit of trouble trying to make it handle all my traffic. I'm using the worker MPM module, which has the following default config:
Code:
<IfModule mpm_worker_module>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
I need Apache to be able to handle about 200-500 requests per second. I tried increasing ServerLimit and MaxClients but that didn't work very well.
I have kind of inherited this server from another person so I'm not totaly sure how it was set up. It is a:
red hat machine running
2.6.9-22.0.2.ELsmp kernel
running apache 2.0.52(red hat)
at any rate this server mainly serves up images but also a few video encoded in flash(.swf files). Basically the issue at hand is there are a few domain names that all point to this server but only one domain name will let the .swf files stream correctly. All other domain names will wait for the whole thing to download before playing. I'm pretty new to apache 2, but I do know apache 1 pretty well. I'm not totally sure where to start with all this. The server is set up with no virtual hosting for each domain which I think could a problem.
how can i compile apache and php in a way that i want?
a customized compilation of php and apache?
will it be gone after plesk update?
or has plesk a module to work as easyapache in cpanel?
I used to have a dedicated server running Apache 1.x (1.3 I think) and in my httpd.conf there were entries about keepalives, maxservers, minservers etc.
I've now got a VPS from FutureHosting, which is brilliant. In my httpd.conf file though, there are none of the above entries. It is running the latest version of Apache (2.2.11).
Are all the keepalive / minservers settings handled automatically in 2.2 or do I just have a default setting and maybe need to add them manually?
I don't have any load issues so haven't touched the config so far.
i thought for moveing my apache 2.0 to 2.2 but iam in little bit confused for max client and keep alive setting in normal apache 2.0 we can see that in httpd.conf file but in apache 2.2 we can able to see that all,any one help me in finding these kind of setting and move my apache 2.2 without any issues
View 0 Replies View RelatedI run a Perl/CGI script from a Web page to download some files located in a Linux server. When I click from a Windows XP on the link of the file to download via this Web page (IE), a dialog box will be displayed to ask me to "Open" or "Save" the file (.txt, .doc, .xls,...) but for some extensions like ".dat" or ".asc", the dialog box ask me to save it only and I have not an "Open" button.
I tried to configure Apache to add these extensions as text/plain by adding these lines in http.conf:
AddType text/plain .asc .txt .dat
How can I add these extensions (.dat, .asc and other extensions) to Apache configuration to be able to open it with Textpad or Notepad?
I hope that the users will be able to open it with Notepad or TextPad without saving it. I know that we can add this type directly in the stations XP but I have a lot of users and I cannot manage that. I hope to perform it from the server. I think something is wrong or missing in my AddType, AddHandler or LoadModule?
c:Apache24bin>openssl.exe
WARNING: can't open config file: c:/openssl-1.0.1e-X64/ssl/openssl.cnf
OpenSSL>
I got this message now for the second time:
Template processing failed: file = /usr/local/psa/admin/conf/templates/default/domainWebmail.php, error = Template_Exception: No data. file: /usr/local/psa/admin/plib/Template/Processor.php line: 28 code: 0 Previous error: Template_Variable_Exception: No data. file: /usr/local/psa/admin/plib/Template/Variable/AbstractCachedData.php line: 67 code: 0.
How can this happen and how to solve this?
I am trying to get a Apache (Win7x64) to run using totally custom config files, so far I have this:
Code : httpd.exe -f ......confapachehttpd.conf
Loads fine and here is my trivial config:
Code:
Listen 8082
ServerRoot webinapacheapache-2.4
ServerName fitrak.me
DocumentRoot webhomewebsites
Regardless of whether I make the DocumentRoot absolute or relative Apache still won't load index.html
500 Internal Server Error
Nothing coming up erroneous in the logs...WTF am I missing???
The port is not occupied...
When i do httpd -S i notice one of my sites show with 2 config source. but i just config one file for the site.
for example:
[root@apachesrv ~]# httpd -S | grep devel.site.com
default server devel.site.com (/etc/httpd/sites/000-default.site.com:1)
port 80 namevhost devel.site.com (/etc/httpd/sites/000-default.site.com:1)
port 80 namevhost devel.site.com (/etc/httpd/sites/devel.site.com:1)
the problem is the following, when i do reload and in this moment the config is bind this result, the site is blank.
Why it shows me this.
version of apache
Server version: Apache/2.2.15 (Unix)
How can I setup my control panel to update the Apache config file
View 4 Replies View RelatedI am trying to do something that I believe is fairly non-standard. What I am looking to do is create a system where I can rapidly deploy web sites without having to restart named and Apache. For example, if a customer completes a process, I want to be able to turn that site on immediately using a temporary domain (somecompany.example.com or othercompany.example.com).
With some programming language (hopefully PHP) I would like to get the customer up and running with their site immediately without having to restart the server. While doing some research I found I could use MyDNS which uses MySQL to manage DNS data instead of configuration files. MyDNS can be updated on the fly.
For Apache I have seen wildcard configurations, but everyone seems to be suggesting the use of mod rewrite. I would prefer that the domain maps directly to a specific folder:
somecompany.example.com -> /sites/somecompany/htdocs
(*.example.com -> /sites/*/htdocs)
Does anyone know how I might do this with Apache. It seems similar to user directories (example.com/~username -> /home/*/htdocs)
how to setup automated log rotation on a Cpanel box?
I need to automatically rotate logs for mail (exim), domains, apache, etc.
we have set logrotate for rotate mysqld.log daily
file is compress, deleted and created from logrotate but mysql not write anything
Any idea about why?
When I specify log rotation settings for domain xyz.com in Plesk panel I expect them to be saved in /etc/logrotate.d/xyz.com file, at least this is the expected behaviour according to Plesk12 Admin Guide: [URL] ....
Apparently, it doesn't happen and I don't have xyz.com file in /etc/logrotate.d/
Log rotation doesn't seem to work either, at least it doesn't work for error.log
I read somewhere that log rotation feature has to be specially enabled in Plesk but I couldn't find specifics anywhere.
All domains were offline this morning. Plesk showed the following error message. It seems we are beta testing the software. I am on Suse 13.1, clean install.
Unable to rotate dump: The dump rotation is failed with code '1' at /usr/local/psa/admin/bin/plesk_agent_manager line 1041.
Warning: domain "abc.com"
The domain 'abc.com' may be inaccessible after backup. Please, resume it manually!
Warning: domain "abc.com"
Cannot resume domain 'abc.com' (ErrorCode: 255, STDOUT [Error:].
