I have installed wamp for editing word press theme every thing is ok but when I create new data base and start configuring my wordpress project file optional message appear when I click submit what should I do ?
View 4 RepliesI'm trying to configure Apache logs to split logs files for every virtual host on the server
for example: {site1 .com} => copy access_log to /home/site1/public_html/logs {site2 .com} => copy access_log to /home/site2/public_html/logs .. {site3 .com} => copy access_log to /home/site3/public_html/logs
i want to also to make sure is the logs files updated in the real time
operating system is CentOs6, with Apache and cPanel
I added the following to my cpanel .htaccess file on my hosting account:
<FilesMatch ".pdf$">header set x-robots-tag: noindex
</FilesMatch>
This was to stop Google from crawling and indexing my PDFs, will this work accross all my addon domains and subdomains (which are wordpress) on my hosting account or do I need to take extra measure?
I am using Wamp server 2.2.
I recently made some changes to the Apache configuration to allow me to make a virtual host for the Zendframework. the change i made were as follows:
<VirtualHost 127.0.0.1>
ServerName zendy
DocumentRoot "C:workspacezendypublic"
SetEnv APPLICATION_ENV "development"
<Directory "C:workspacezendypublic">
DirectoryIndex index.php
AllowOverride All
Order Deny,Allow
Allow from all
</Directory>
</VirtualHost>
Since these changes were made, my wamp server will not start up. the wamp bar remain red.
What I have to do to find out/trace where the fault is?
i installed wampserver on my remote windows VPS.i opened port 80.after that i try to connect it by typing "h t t p : / / remotelink" on my local machine browser.but i can not connect.
View 4 Replies View RelatedI'm running a WAMP server, hosting an internal website for my company's use.
Windows XP Home SP3
Apache 2.0
MySQL Server 5.5
PHP 5.?
Last night Microsoft Security Essentials froze while running a scan. I restarted the scan and it froze again, so I rebooted the server. Now Apache won't start, providing the following error ....
I have put up a WAMP server that is based on Apache2.4.4. I am trying to utilize the rotatelogs.exe to rotate my access log every night. I have this working on IBM HTTP installations. IBM's HTTP is based on Apache 2.2. why the CustomLog command is not working? The command under my Virtual Hosts that I am using is:
<VirtualHost *:80>
ServerName xxxxxxxx
DocumentRoot C:wampwww
[Code]....
My linux host requires a few lines of codes in my .htaccess file to properly run my site.
However, these few lines of codes are not supported by my local Wamp on Win7.
Is there a way to add a "If Wamp Then not run these lines" in my htaccess file
So that I don't have to manually change the .htaccess file before upload/downloading the site between the two systems?
Problem detected!
19:58:32 [Apache] Port 80 in use by "Unable to open process" with PID 4!
19:58:32 [Apache] Apache WILL NOT start without the configured ports free!
19:58:32 [Apache] You need to uninstall/disable/reconfigure the blocking application
19:58:32 [Apache] or reconfigure Apache and the Control Panel to listen on a different port
19:58:32 [Apache] Attempting to start Apache app...
19:58:32 [Apache] Status change detected: running
19:58:33 [Apache] Status change detected: stopped
19:58:33 [Apache] Error: Apache shutdown unexpectedly.
19:58:33 [Apache] This may be due to a blocked port, missing dependencies,
19:58:33 [Apache] improper privileges, a crash, or a shutdown by another method.
19:58:33 [Apache] Press the Logs button to view error logs and check
19:58:33 [Apache] the Windows Event Viewer for more clues
19:58:33 [Apache] copy and post this
19:58:33 [Apache] entire log window on the forums
that is my error message I have changed skype's port from using port 80 and also uninstalled IIS from microsoft I have only installed xampp on its own without wamp server so that they dont conflict.
Trying to install yum no RedHed EL4 with Python 2.3.4. I have downloaded [url]and untarred it. I cd'd in the to untarred directory. I then went to ./configure and it gave me:
./configure
-bash: ./configure: No such file or directory
I just purchased my first hosting package in 10 years. Things have changed quite a bit and I'm unsure about some of the permissions settings. My new account is with Host Gator.
I could really use some help.
I'm going to use WordPress for the first time. I'd like to harden down my Linux server on Host Gator as much as possible. I'd also like to harden the WordPress permissions as much as possible.
I've read a fair amount about and have a little experience in setting read, write, and execute permissions plus some other security experience. My main concerns are to strike the balance between hardening down enough without making it so WordPress can't access whatever it needs to access.
I also have "Hot Linking" to consider. Not sure if that will make it difficult for WordPress to do it's thing.
Did I say that clearly enough?
I have a file that creates subscriptions , customers and domains. moreover, also installed wordpress to new domain. it makes it through the php file .
The problem I have is that when installing wordpress on plesk domain is installed in a subdirectory called wordpress in the root directory instead .
Is there any way of changing the php file that is installed directly to root ?
Ask this because from the plesk panel is done, there is an option through the file but can not.
Where can I find how to configure apache for web hosting correctly?
View 7 Replies View RelatedI use linux server with Cpanel control panel.
default default apache logs folder is in /usr/local/apache/logs/error_log
I want to monitor errors . How can I have an error log file for each individual domain?
(I am using apache 2.2.25).I have this "HTML5 and CSS all in one for dummies" Book. And it tells me I have to configure the .conf file to make apache work with PHP.
At this point I have only edited the Document root folder. The book tells me to find a Loadmodule with an # with a mention of PHP (I'll put the text of the book at the end) and to add an "addtype" statement. If have found neither and when I add the manually the server doesnt work.how can I make PHP work? Also, I have noticed that the Apache commands in CMD don't work. I am running windows 8.1. URL....
I'm working on a script to automatically install apache. Now, after the apache configure/make/make install I need to test for a successful completion. I checked the configure options but there is no flag for an unsuccessful finish.I would like to know if there is any other way than to test the command output for a successful or unsuccessful ending? I'm saving the output on a file and then grepping for an expected line. For example "creating test/ Makefile" for the configure.
View 2 Replies View RelatedWhat are the ./configure parameters commonly used for Apache (2.2) and PHP (5.2) installations on web hosting servers?
View 5 Replies View RelatedI wanted to configure 2 clusters on Apache 2.4. Here are my sample configurations
Cluster 1 config:
----------------
<VirtualHost *:80>
ServerName mywebsite1.com
<IfModule mod_proxy_balancer.c>
<Proxy balancer://sgcluster>
BalancerMember http://IPaddress1:80/ loadfactor=1
BalancerMember http://IPaddress2:80/ loadfactor=2
ProxySet lbmethod=byrequests
[Code] ....
I've included both configuration file in httpd.conf. I'm getting the errors, when I tried to start up the apache.
[Thu May 02 11:01:34.243583 2013] [slotmem_shm:debug] [pid 9240606:tid 1] mod_slotmem_shm.c(448): AH02301: attach looking for /opt/apache2/logs/slo
tmem-shm-mod_heartmonitor.shm
[Thu May 02 11:01:34.243667 2013] [lbmethod_heartbeat:notice] [pid 9240606:tid 1] AH02282: No slotmem from mod_heartmonitor
[Code] .....
how to benchmark and configure FCGI.
View 4 Replies View RelatedI have a magento based ecommerce website. In have to integrate a payment method which requires a certificated delivered from a specific certification authority not recognized by browsers. Then I have to use 2 diffrent certificates, one for the payment and the other for the remaining secure operations. Is it configurable in apache?
View 6 Replies View RelatedI have substituted the domain names and DocumentRoot folders for generic titles, so I will refer to those where applicable in the thread as well.
Here is my httpd-vhosts.conf:
<VirtualHost *:80>
DocumentRoot "C:WebServerwww"
</VirtualHost>
<VirtualHost *:80>
[Code] ....
I've got a quite difficult problem which I don't know hoe to solve. We use a self created ISAPI module which is a "business server" running behind an Apache.
From time to time a client app crashes the server (the circumstances are not quite clear) - and because there is only one server process, all other clients crash as well. Here is an exemplary log of a crash:
Faulting application name: httpd.exe, version: 2.2.22.0, time stamp: 0x4f242d7a
Faulting module name: ABCServer.dll, version: 1.0.0.1, time stamp: 0x53cfffa5
Exception code: 0xc00000fd
Fault offset: 0x00004cf6
Faulting process id: 0x94c
Faulting application start time: 0x01cfc5cc18c67d57
Faulting application path: C:Program Files (x86)Apache Software FoundationApache2.2inhttpd.exe
Faulting module path: C:datawwwabcremoteABCServer.dll
Report Id: d27d5891-31da-11e4-93ff-0003ff4356f9
Faulting package full name:
Faulting package-relative application ID:
Exception code: 0xc00000fd means stack overflow as I learnt. Therefore we configured mpm_winnt_module to use a 8M ThreadStackSize but this didn't work.
A solution might be that Apache starts for every client its own server process with the module ABCServer.dll. Because it is quite small and there are not thousands of customers this sounds like the perfect solution. No other clients/customers would be affected by a crash.
Unfortunately mpm_winnt_module supports only 1 process AFAIK. Worker and Prefork MPM are not available in Apache's Windows version what I read.
How can we configure Apache to start a new module process per client?
I have a SSL certificate for my website. I add the certificate to plesk and now I want use the certificate for diffrent ports.If I run only apache without plesk I need to add the ports to the apache conf where it listening too.At the moment apache listen only on port 844. But I want add 8443 too, how I do it in plesk?
View 4 Replies View RelatedI have a class project that we are working on where we have to configure and implement an Apache server with ssl using ldap for authentication. I have documentation of literally everything I have done in the configuration. Everything seems to be fine with the config that I can tell. The client gets a prompt for username and password when they access the server ip address. However, once the correct username and password are entered, then the client receives a 500 internal server error message instead of the webpage: "Internal Server Error...The server encountered an internal error or misconfiguration and was unable to complete your request.
View 1 Replies View RelatedI'm trying to configure a host to use vhosts but the server keeps breaking when I uncomment the Include vhosts file line. The apache process starts but none of the hostnames work. When the line is commented out, only the main hostname (defined in httpd.conf) works.
View 1 Replies View Relatedi manage linux apache webserver with a few wordpress blogs and from time to time i see someone inject a malicious .php file into wp-content/uploads/2014/10/ directory.
i think its some bad plugin or theme, but these is more blogs, i ugrade, update, WP, but
how can i setup some monitor to tell me which php file (or even line in php file) injected that malicious .php ? I have linux root access so i can setup anything