New to dedicated server and struggling!
We have a dedicated server with 4 sites running. All accessed through their domain names.
Is it possible to also have a site on the server as http://ip address for a 'white label' programme?
I hosted my site in a host "bluehost.com" . They are many domains hosted there. I put my site on a folder "example".
But I am not able to access that site using domain.com/example, it says that "The server could not find this page".
It appears that I may have my access blocked from my home network to my web site. I was attempting to set up a POP email account the other night on the server. Since then, I have not been able to access my domain name through ANY of my browsers.
Also, I cannot log-in via FTP. I also tried from my iPod touch on my wireless network at home, no access.
I was able to access and FTP today at work. I also can access on my blackberry. How is this possible?
Can't access my web site, my web host says it's my ISP.
My WebHost said "It seems that your ISP cannot resolve the domain".
Can an ISP have any control over the accessibility of individual domains?
That's sounds a little strange to me.
My ISP support is currently closed, but I suspect they'll tell me to contact my web host.
I was able to access it earlier today.
What do you think? Is the ISP theory possible?
I woke up this morning to find I wasn't able to access my domain based email or my website. So I figured I would check with my host, (www.hostpc.com), and I was unable to access them, also.
I had someone else from a remote location and PC check and they can access hostpc as well as my website.
My PC is up and running fine otherwise.
As the title says I get this error
"Fatal error: Maximum execution time of 30 seconds exceeded in /home/nicsad/domains/updownloading.com/public_html/include/kernel/crontab.php on line 0"
when I try to access my site.
The error accured after I "optimized" (yeah sure) Im killing my self, lol,
the file /etc/httpd/conf/extra/httpd-mpm.conf
and restarted the server, I am on a dedicated server, Linux Centos 5 with DirecAdmin panel.
First it worked, there was no problem at all, then after 5-15 minutes I got the above error?
What is weird is that all other websites I have on the server works fine, it only this one which doesnt work:
updownloading com
And what is more weird is that the temporary index.html file I have uploaded is accessible?
but the normal index.php file which my website use is not.
All worked perfect without problem before but now I get the above error.
Please again help, I promise after this time I wont "optmizing" anything Why cant I just be satisfied and stop mendling with what I dont know.
I recieve around 400-500 visitors a day so I hope you can help me fix this problem.
<?
function usecurl1($url)
{
$ch = curl_init();
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, 1);
curl_setopt ($ch, CURLOPT_URL, $url );
curl_setopt ($ch, CURLOPT_USERAGENT, "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.1) Gecko/20061204 Firefox/1.6");
$output['html'] = curl_exec ( $ch );
$output['opt'] = curl_getinfo ($ch);
curl_close($ch);
return $output;
}
function usecurl($url)
{
$output=usecurl1($url);
return $output['html'];
}
$output=usecurl1("http://en.wikipedia.org/wiki/Special:Random"); //doesn't work
print_r ($output);
echo '<br>';
$output=usecurl1("http://yahoo.com"); //works
print_r ($output);
?>
well its been like 6 hours since i purchase from cirtex.
and i can't access ftp or my site.
is it just me or is anyone else experiencing this?
How I do put a website of a client that is in production and give them access it to view it while preventing search engines from indexing it? I had the production site on a sub domain but search engines would inevitably index it. I could a no-index robot text but if people had the domain, they'd still find it. I want to just put it on my server and the client can login with a PW and view the status.
View 3 Replies View RelatedI am using vps
I am receving calls from some countries or areas when they say they can not access my site ( site can not be found)
I called my provider and they say every thing is alright from their site
and from my side too but some areas in other countries like right now I received a call from canada they can not access my site my provider wants me to send Tracert
I can ask my friends to send that but not every user why this happanes and what tools are available to check and see if my site is alright from all areas or counties?
to get a copy of their entire site onto our servers.
The problem is that they have no backups, and their current host has denied them access to their account. (It's a long story.)
Rather then try and fight with their old host, I wonder if it's easier to just run some kind of "website copy" program and grab a copy of all pages and images, linked files, etc..
Their current website pages are served using an ASP database application, but the copy they need only has to work. It doesn't need to be dynamic, etc... as long as all the pages are there it's good.
I'm new to using directadmin and I've got a problem; I've not yet switched the DNS over to the directadmin server 'cause I want to make sure the sites work first, however I can't find how to view the sites. With cpanel you can go to http://192.168.1.1/~username (where 192.168.1.1 = IP of server and username is username of account).
is this possible with directadmin? I can't find anything about it, anywhere.
I can access FTP, SSH and httpd is showed as running when i check with 'httpd status'. Memory ram has half of them left(except that swap is 0,0).
I can't access my site via browser
Why tried restarting
[root@web2 ~]# service httpd start
Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80
(98)Address already in use: make_sock: could not bind to address 0.0.0.0:80
no listening sockets available, shutting down
Unable to open logs
[FAILED]
[root@web2 ~]#
I have a user who says he cannot get to any site on my server from either home or work. He has been a user for many years, and has never had any problems. He has also checked with his IT at work and they confirmed the site is not available. He is computer savvy, so I trust he is telling the truth.
His work and home are only 10 miles apart.
Do you guys have any ideas what could be happening? Is there a DNS entry wrong somewhere? He can't access the site even when putting in the IP address.
There is one other user reporting something similar but other than that no other complaints. The site works fine for everyone else.
site is gm-trucks.com
I can login to my site or it is extremly slow.
[url]
what is happening to my server? it is because of network or something else?
I created a new virtual site and cloned an existing to to the new docroot to have content. But when I access it I receive the Access Denied you do not have permission to access . . .I've checked all my entries and unless I'm blind I cannot figure out how to remedy this on my Windows 2003R2 server running apache 2.2.x
View 1 Replies View RelatedHow can I allow only one ip or a list of ip addresses to access port 8443.I need to limit access this port to few ip addresses and not everyone
View 6 Replies View RelatedAttached is a (badly) drawn diagram of two sites, connected by a vpn.
The site to the left, is network 10.0.0.0/24 which runs a linux server as the router for the network.
The site to the right, is network 10.1.0.0/24 which runs a windows 2003 server as the router for the network.
Now, my problem is, the clients behind the windows 2003 server can ping any machine on the first network because i setup a static route to route all traffic to 10.0.0.0/24 over the vpn interface.
now, my problem is, only the linux server can ping any machine on the windows 2003 network, any client behind the linux server cant seem to route over the interface.
I have the following route on the linux server: .....
Starting point: a working site using a shared IPv4, dedicated IPv6, and SSL. HTTP and HTTPS work, the latter only using SNI of course.
The good news: If I simply allocate an IP resource of 1 to a subscription it is pulled from the pool, assigned to the service node, assigned to the web site, DNS is updated, and the site is automatically changed to using a Dedicated IPv4 and Dedicated IPv6.
The bad news: visitors land on the default web site of the service node, with the default SSL certificate.
Other info: I can't ping the new IP, even though it shows in "ip a l" and /etc/sysconfig/network-scripts/ifcfg-eth0:0. [edited]
After the IP assignment, it is still installed, and /etc/httpd/conf/plesk.conf.d/ip_default/domainname.conf shows the new certificate is being used.
However, a second set of VirtualHost entries is created in server.conf for this IP for ports 80 and 443, with NameVirtualHost enabled on the new IP. The port 443 entry uses the default certificate. Apache's setup this default VirtualHost entry will override the web site configuration because Apache is listening on port 443 with the wrong cert.
If I go to "Change webspace settings" and toggle to Shared IPv4, Dedicated IPv6 the site works again via HTTPS, and Dedicated IPv4 and Dedicated IPv6 breaks it again. Setting the SSL cert to None and back again does not work.
Setting the SSL cert to None, changing to a dedicated IP, and enabling SSL results in the server being inexplicably inaccessible...browsers no longer connect to either the default site or the correct site, and I don't see any entries in the vhosts's logs.
is there anyone knows for a good hosting located in uk,which is allowed : adult site and casino betting online site ?
im looking for vps and dedicated server.
please help me i really need as soon as possible.thx
I run basicly run two main site.
1.Forum big one .
2.File and image sharing site.
(image sharing site generates thumbnails which produces lots of hits)
In these conditions how much difference can lighttpd can do as compared to apache for keeping my 600 MB Ram VPS host constant.
I found a great little app called ID Shutdown Manager which bascially lets you do stuff like wake on LAN, Shutdown, Log Off etc.
The App also has a cgi script which you can call from a web server so you get a web interface to the program.
This is exactly my reason for getting the app as I just wanted to host a web page where I could login from the internet and wake on lan my media PC.
Ok so...
The app gives you all the iis or apache setup instructions and tells you to place the cgi script which is actually a .exe into the scripts folder and then enable basic authentication for it.
Done.
So if I navigate to <SERVER>/scripts/sdmancgi.exe its supposed to give me a user / pass prompt and then when login successful I see the app and can wake on lan etc.
ok I have got this to work
on the actual machine where server is running I can access it in IE7 by localhost etc.. and it works
However when I try to access from another PC in my lan by typing <SERVER>/scripts/sdmancgi.exe I get a nice little message saying the content cannot be displayed you may require to insall a program or something to display it.
If I try to access the page from firefox on same remote PC, it works!
I can also access page from outside my LAN, it works on my N95 browser.
Also I have had friends try it from firefox from the Internet and they say it works as well.
Forgot to mention I am running on port 8081 as I already have other servers running on 8080 and 80 (one is my router and the other server installed itself from setup.exe and I dont know what server its using)
I have also tried latest apache server as well as some other free one. Both have the same effect. Ok in firefox, not in IE.
One would think its a problem with the cgi file not compatible with IE7 however, I even tried to go to default page setup in IIS <SERVER>:8081 and I get the same message. So at this point the server hasnt even tried to access CGI or prompt for Basic Authentication.
I tried googling and not much luck. I read something about CSS and when I view source of failed web page from IE7 it mentions something about CSS so dont know if this is it?
I'm on a short assignment to inventory and manage the fixed assets of a small company, and we've just bought a web-based database for this purpose. While I'm pretty good at administering/running local databases, the web part has me stymied. Our company is between IT people, and there's no one on site with any more idea than I have about what's going on!!
Here's what I have so far:
--The company has a website which I'll call "ourwebsite.org" -- which I think, from searching the IP address the website points to, is hosted by HostMySite.com.
--There's also a record in DNS Management with the same name (ourwebsite.org), but pointing to our little server's local IP address.
--I need to find a way to get my database -- which I can access on the network at (server's IP address)/database (ie 0.0.00.0/database) -- online. I tried creating records in DNS Management (for ex., assets.ourwebsite.org) that point to our server's IP (the one that, if I type it in on the network, I can get to the site I'm looking for), but get generic "can't find the page" or "can't connect to the server" errors, even after 72 hours, when trying to access it from off the network.
--If I browse to assets.ourwebsite.org/database on the server itself, I get to the website! But if I go to that page from any other computer, on or off the network, it doesn't work.
--The Server is running Windows Server 2003
So, what are my options? Do I have to talk to the HostMySite.com people to add this page? Shouldn't I just be able to use my server's name (ourcompanyadc.ourcompany.org) and have that route to the server? What's going on here! Is there a simple way to get a tiny local-server-hosted website online outside of the network?
I just transferred a domain from one cpanel box to another.
Now, that site is showing someone else's page. I've seen this happen before, but I cannot remember the fix.
the virtual host in httpd.conf is fine, shows proper IP, username, docroot, etc
Dns zone is fine as well.
The domain is using the server's main IP, so that's not the cause.
Centos 5 / cpanel 11 / apache 1.3 / php 4x