I created a new virtual site and cloned an existing to to the new docroot to have content. But when I access it I receive the Access Denied you do not have permission to access . . .I've checked all my entries and unless I'm blind I cannot figure out how to remedy this on my Windows 2003R2 server running apache 2.2.x
View 1 Replies
I have an Apache server running on a virtual machine and I want to be able to access the pages it serves from a browser running on the host OS.
I am using OracleVM virtualbox as my VM platform.
I am using windows 7 as my host OS.
I am using ubuntu as my guest OS.
I have managed to set up a virtual host so that it works from browsers running in the guest OS (ubuntu)
But I cannot get it to serve these pages to a browser running in the host OS windows.
The config file in the apache2/sites-available and apache2/sites-enabled has the following config for the virtual host I am trying to access.
<VirtualHost *:80>
ServerAdmin webmaster@localhost
ServerName testsite
DocumentRoot /var/newserver
<Directory />
Options FollowSymLinks
[Code] ....
I migrate from plesk 9.5 to another server with plesk 12.0.18, and then outlook and mail default from iphone don't work, but tunderbird and webmail work well.
In outlook when i put the same configuration than tunderbird and i try to send mail out from my domain said this error:
Error del servidor: '554 5.7.1 <244.Red-88-18-221.staticIP.rima-tde.net[88.18.221.244]>: Client host rejected: Access denied
I don't know if outlook is bad configuration but with plesk 9.5 worked well, and now nothing.
I can recive mail but not send.
I have apache, php, and mysql setup on CentOS 4.4. I have phpMyAdmin running perfectly in a folder in /var/www/html/phpMyAdmin. I can access phpMyAdmin and use it perfectly. I downloaded Cacti which is a server monitoring application written in php, nothing special. I untar the file and it creates a folder, I simply do a mv command from /home/sys/cacti to /etc/www/html/cacti. Then when I open my browser and attempt to access: [url]I am getting a Access Denied error. It makes no sense though, I have verified the permissions of the files and folders, all good.
The group owner and owner are root, the files are all -rw-r--r-- and the folders are drwxr-xr-x.
I get the following error when let my site connect to my database: Access denied for user 'apache'@'localhost' (using password: NO)
But when im running lil test script which connect to my localhost with the same passwords and it gives the status 'Connection OK' (im running on admin account, made a MySQL account with DA)
Code:
<?php $link = mysql_connect('localhost','admin_removed','removed'); if (!$link) { die('Could not connect to MySQL: ' . mysql_error()); } echo 'Connection OK'; mysql_close($link); ?>
I have recently switched from Ubuntu to Mint because I would like to enjoy out of the box functionality. I installed Apache, PHP and Mysql. When I go to localhost, the page displays correctly indicating that the server is functioning. In /var/www/html I created devPages. In devPages I created a symlink to a directory in my home directory where I keep all of my html/php files.
When I point my browser to http://localhost/devPages/1/ I get "You don't have permission to access /devPages/1/ on this server". This appears to be a permissions/ownership issue. I don't want to change the permissions for the directory or files in the home directory because they are set to work properly on my production server. Is there a way to get apache to accept files in my home directory?
I have set owner and group for devPages and the symlink to www-data. Set permissions to 755 for devPages.
By the way, under Ubuntu, I have always used a symlink and it always worked without any issues.
Since the plesk installation by my hoster did not include a mail server, I installed postfix and dovecot from the upgrades menu, followed the steps at [URL] .... and ran mchk to add the mail settings option to my domain. However, when I click on it, I receive the error "Warning: Permission denied." and stay on the domain overview. There is no error logged in var/log/sw-cp-server/error_log, /var/log/sw-cp-server/sw-engine.log or /usr/local/psa/admin/logs/panel.log.
I also tried "plesk bin mail --create foo@my.tld -mbox_quota 1M", but then I receive the error
Code:
ERR [util_exec] proc_close() failed
mailmng-outgoing failed: ERROR:outgoing:mails.domain_id may not be NULL
System: OpenSuse 13.1 (x64)
Plesk version: 12.0.18 Update #35
Can't access my web site, my web host says it's my ISP.
My WebHost said "It seems that your ISP cannot resolve the domain".
Can an ISP have any control over the accessibility of individual domains?
That's sounds a little strange to me.
My ISP support is currently closed, but I suspect they'll tell me to contact my web host.
I was able to access it earlier today.
What do you think? Is the ISP theory possible?
I woke up this morning to find I wasn't able to access my domain based email or my website. So I figured I would check with my host, (www.hostpc.com), and I was unable to access them, also.
I had someone else from a remote location and PC check and they can access hostpc as well as my website.
My PC is up and running fine otherwise.
I've just downloaded Microsoft Virtual PC and the Internet Explorer 6 Application Compatibility VPC Image containing an XP installation for testing sites with IE6 [url].
Everything works fine, I chose VPC Shared Networking (NAT) and I can access the internet from the VPC as well as my Apache development server which runs on the host OS (Win XP) by going to the host's IP address which is [url] in my case. And here I have 2 problems:
1. I want to access [url]on VPC just by typing [url]. I added the following line to the hosts file:
192.168.52.141 localhost
But this doesn't work. Interestingly, any name other than localhost works fine, for example:
192.168.52.141 localhost.localhost
or
192.168.52.141 local
This is not a major problem but I'd prefer localhost. Any ideas how to do that?
2. And the more important issue: on my host OS I have some development sites which I have set up to be accessed by subdomains, for example [url], in httpd.conf:
Code:
<VirtualHost 127.0.0.3>
ServerName perfekt.localhost
DocumentRoot C:wwwperfekt
DirectoryIndex index.php index.html
</VirtualHost>
and in hosts file:
Code:
127.0.0.3 perfekt perfekt.localhost
And now I want to access this site from my VPC too by using subdomains like this! How can I do that? The address 127.0.0.3 seems to be local to the OS and VPC can't see it. I have tried setting other IP addesses in httpd.conf but nothing outside the 127.x.x.x range works on either OS. I suppose I need to make each of my sites to be seen under a different IP from the outside network so that VPC (which is "outside" the host OS) can access them - then I just set up the appropriate subdomain names in VPC hosts file -
For some reason, the first virtual host i have listed in apache2.conf gets all the traffic of all the other virtual hosts listed below it.
Example: Domain xyz.com is listed as the first virtual host. the second, third, and fourth are 123.com, 987.com, and mno.com, respectively (fictitious domains). However, it seems that everything below xyz.com goes straight to xyz.com.
If i switch the first entry, xyz.com with any of the others, such as mno.com, so that mno.com is the first virtual host entry, everything then forwards to that domain.
I've run into a wall trying to run apache with multiple websites allowing users to use FTPd to manage files.
I'm running FreeBSD 7.1 on Apache 2.2.x
The issue is that Apache runs as www:www but FTPd writes the files as username:client. When performing some scripts that edit back-end files, this obviously can cause errors.
The data for each directory is stored in /home/username/www
I looked into some apache directives I could use. I tried putting User and Group directives into the vhost configuration for each vhost, but that did not work. I even found the perchild module and it looked like it can do the job but was a bit scared and turned off by the fact that it states it is beta at the top of the page. (I cannot link to it because I do not have enough posts.)
I have a virtual host and I want to allow .htaccess files to be used, but that requires to put allow override yes in the virtual host declairation as its off by default, but I get this error:
Starting httpd: Syntax error on line 16 of /etc/httpd/conf/virtualhosts.conf:
AllowOverride not allowed here
This completly ditches my whole virtual hosting idea that I've been planing for a while.
Any other way to allow .htaccess through virtual hosts?
using apache 2.2.3
Today I configured a Virtual Host (VH) for one of my customers. VH run on WindowsServer 2003 Apache 2.0.59. I enabled mod_proxy and mod_proxy_http modules and successfully loaded. Here is the VH config:
Code:
<VirtualHost xxx.xxx.xxx.xxx:80>
ServerAdmin admin@example.com
ServerName www.example.com
DocumentRoot C:/Apache2/htdocs/www/example.com
DirectoryIndex index.php
<Proxy *>
Order Deny,Allow
Allow from all
</Proxy>
ProxyRequests Off
ProxyPass /cms-test [url]
ProxyPassReverse /cms-test [url]
ProxyPass /cms-eshop [url]
ProxyPassReverse /cms-eshop [url]
ErrorLog logs/www.example.com-error.log
CustomLog logs/www.example.com-access.log combined
</VirtualHost>
According stated above proxy should map the content of yyy.yyy.yyy.yyy:80 and send it to client... Apache doesn't do that but redirects client directly to yyy.yyy.yyy.yyy instead, even rewriting URL, what is not proper purpose of proxy. I would expect proxy to retrieve content from yyy.yyy.yyy.yyy:80 and forward it to client without URL rewriting. Rewriting URL and direct aiming of client to source of content is unsuccessfull of course, because the source (yyy.yyy.yyy.yyy:80) trust only to xxx.xxx.xxx.xxx which has a right to request a content.
Could anybody explain why proxy doesn't proxy and redirects instead?
I'm trying to setup a subdomain, and this is what i've added in httpd.conf
<VirtualHost 000.000.000.000>
ServerName dir.domain.com
DocumentRoot /home/domain/html/dir/
</VirtualHost>
Am i missing something here? I restarted httpd when finished.. but it doesnt work.
I have a fresh Ubuntu 14.04 install (desktop). I installed Apache, php and mysql from APT and updated everything.I tried to setup a virtual host using these directions: URL...I followed them to the letter:
o I created a folder /var/www/mydomain.local/public_html
o I copied the 000-default.conf in sites available and modified it
o I added mydomain.local to my hosts file (with IP of 127.0.0.1
o I used a2ensite to enable the host
o I used service apache2 reload
When I went to mydomain.local in firefox, it took me to the default host main page.I tried a restart of the service and even a reboot of the computer. No change.On a theory, I used a2dissite to remote 000-default from the enabled site list and reloaded the service. I got the home page for mydomain.local after that.
I created a named host called localhost and reloaded the apache. When I went to http://localhost it took me to the mydomain.local homepage. Rebooted the computer. Now, localhost gives me the apache default home page and mydomain.local does not work at all (I get a server not found).
I get the feeling that there is an apache configuration item I am missing but I cannot find it.
I have a server server.SERVER.com which ajp-redirects /app to port 8009 in httpd.conf as
View 7 Replies View RelatedOS: RHEL 6.4
SELinux: permissive mode
Apache: 2.2, mod_fcgid, mod_suxec, mod_ssl enabled
Common Name: [URL] .....
i have followed twice a tutorial (you'll find it if you type in google "sellersrank ubuntu subversion". It is the second result. You know, I cant insert URL in my posts yet...) to install Ubuntu + Apache + Virtual host + Subversion, but when i try to access the repository through "svn.domain.com" an error message like this is showed:
Address Not Found
Firefox can’t find the server at svn.domain.com.
I have Ubuntu 8.04 + Apache 2.2.8
I'm going to use my apache server to host files(it works with a php script so we can't use FTP for now...) so I was wondering if I could limit this virtual host's bandwidth per second so the websites on the other virtual hosts still load properly. Any module for apache on windows which can do this?
View 2 Replies View RelatedI use Webmin (1.69) to work on my development environment. I am using Ubuntu Desktop 14.04 right now. I am not exactly an Ubuntu newbie but I would not call myself an expert either.
I created a virtual host (newdomain.local) with webmin. I filled in all the fields and saved the new VH definition. I added newdomain.local to my hosts file with an ip address of 127.0.0.1 and restarted apache.
When I go to [URL] ...., it is not taking me to the VH's home page but to the default home page.
Why this might be happening?
I have a WAMP server that hosts a few sites, but I have a particular site with about 5 domains. I want them all to point to the correct website folder and all to be redirected to a single domain for SEO purposes. Here is what it looks like in the virtual hosts file:
<VirtualHost 50.62.82.101>ServerAdmin info@hovaness.comDocumentRoot "c:/wamp/www/example"ServerName example.comServerAlias example.net www.example.com www.examples.net www.examples.com examples.com examples.netErrorLog "logs/example.com.log"
OS: RHEL 6.4
SELinux: permissive mode
Apache: 2.2, mod_fcgid, mod_suxec, mod_ssl enabled
Common Name: www.user.dept.university.edu
(Note:user names, accounts, organizations etc. sanitized)
why Apache will serve PHP-based web pages over port 80 but not over 443. Here is the virtual host block excerpt from httpd.conf:
Code:
<VirtualHost *:80>
ServerName user.dept.univsersity.edu
ServerAlias user
DocumentRoot /home/user/public_html/subdirectory
<IfModule mod_fcgid.c>
[Code] .....
I am trying to set up domains and subdomains, on my webserver, however the domains are resolving, but when accessing a subdomain I get a 500 internal server error, permissions on files are the same on both domain and sub domain level.
My virtual host files looks like this for domains and for the subdomains, and I am using Apache 2.4.7, on an ubuntu 14.04 running on a rackspace cloud server.
Domains:
<virtualhost *:80>
ServerAdmin mail@mail.mail
ServerName domain.com
ServerAlias www.domain.com
[Code] ....
Why it works on domains, and not the subdomains?
I'm using Vertrigo 2.30 which in turn uses Apache 2.2.26 as part of its stack I am trying to set up virutal host on Windows 7 home premium.in httpd.conf I have uncommented Include conf/extra/httpd-vhosts.conf in C:WindowsSystem32driversetchosts I have
127.0.0.1 localhost
127.0.0.1 localhost
198.0.65.217 talknowradio.com # www
198.0.65.217 paranormalpalaceradio.comcastbiz.net # vhost
in C:Program Files (x86)VertrigoServApacheconfvertrigo.conf I have
<Directory "C:Program Files (x86)VertrigoServwww">
Options Indexes FollowSymLinks Includes
AllowOverride All
Order allow,deny
Allow from All
</Directory>
[code]...
my primary domain still works perfectly but the virtual host I created keeps loading 403 error page I have checked the Apache error log and I found two instanses of
[Tue Dec 31 08:33:29 2013] [error] [client 198.0.65.217] script 'C:/Program Files (x86)/VertrigoServ/www/vhost/modules.php' not found or unable to stat, referer: URL....I have no clue where or why its reading a module.php file granted I do use Nuke Evolution on my primary site but the only page in the virual host folder is a index.html I have checked and double checked.
I am using apache as a reverse proxy, I have several site with http and everything is working fine. For the first time I have tried to configure with https port 443 with certificate, the problem is that it doesn't return to the browser the certificate that I have indicate in the "virtual host" but rather the default certificate of the site.
Here is my virtual host :
<VirtualHost *:443>
ServerName hygie.sante-idf.fr
SSLEngine on
SSLProtocol all
SSLCertificateFile "/root/apacherp/cert/hygiesslcertificate.cert"
SSLCACertificateFile "/root/apacherp/cert/hygieCAcertificate.cert"
SSLCertificateKeyFile "/root/apacherp/cert/hygieprivate.cert"
ProxyPass / http://XXXXXX/
ProxyPassReverse / http://XXXXXX/
</VirtualHost>
Everything is fine when I start stop, I m sure the entry is used I have added : NameVirtualHost *:443
But the Certificate information arent the one that I have enterred , but the default values I think....
httpd -v
Server version: Apache/2.2.3
Server built: Mar 4 2010 09:57:54
I am trying to setup a subdomain and/or virtual host to redirect to a specific port and path. I have setup my server with DDYNS through my domain name registar. Through the ddyns client I have set it to assign a subdomain of "outside.name.com" so that my server will have a easy name to get to instead of a dynamic ip address.
I have also setup on my registrars host records another subdomain of "inside.name.com" with a static IP address for internet network accessing to my server.My problem is that I have a service/program on my server that I need access to both internally and externally and this service can only be access through a port of 32400 and HTTP address of /web. (e.g. outside.name.com:32400/web or inside.name.com:32400/web)...
Is there a way that I can create a VirtualHost or Subdomain of "service.*.name.com" that redirects them to ":32400/web" of the hostname they're on? (e.g. service.outside.name.com automatically forwards or proxies--to keep it pretty--to service.outside.name.com:32400/web)
I am trying to setup a subdomain and/or virtual host to redirect to a specific port and path. I am, however, having great difficulties doing this.
I have setup my server with DDYNS through my domain name registar.
Through the ddyns client I have set it to assign a subdomain of "outside.name.com" so that my server will have a easy name to get to instead of a dynamic ip address.
I have also setup on my registrars host records another subdomain of "inside.name.com" with a static IP address for internet network accessing to my server.
My problem is that I have a service/program on my server that I need access to both internally and externally and this service can only be access through a port of 32400 and HTTP address of /web. (e.g. outside.name.com:32400/web or inside.name.com:32400/web)
This is annoying for others to type out and I am just wanting to make it look pretty. Is there a way that I can create a VirtualHost or Subdomain of "service.*.name.com" that redirects them to ":32400/web" of the hostname they're on? (e.g. service.outside.name.com automatically forwards or proxies--to keep it pretty--to service.outside.name.com:32400/web)
I'm trying to configure Apache logs to split logs files for every virtual host on the server
for example: {site1 .com} => copy access_log to /home/site1/public_html/logs {site2 .com} => copy access_log to /home/site2/public_html/logs .. {site3 .com} => copy access_log to /home/site3/public_html/logs
i want to also to make sure is the logs files updated in the real time
operating system is CentOs6, with Apache and cPanel
