System Integrity Monitor
May 29, 2007
I installed system integrity monitor problem
It says:
[05/29/07 21:35:15]: HTTP service is online.
[05/29/07 21:35:15]: HTTP url request failed, assuming offline.
[05/29/07 21:35:15]: HTTP offline, restart limit exceeded.
How do i increase this so called restart limit?
System integrity monitor on server.dealsreferals.com has taken action in responce to an event. Recent event logs are enclosed below for your inspection. There has been 23 events today, if an average of 1000 events is reached, e-mail alerts will be terminated for the duration of the day.
- Events Summary:
Total event count: 23
Average event count: 2
- Service Summary:
FTP [online - 0 events]
HTTP [offline - 11 events]
DNS [online - 1
1 events]
SSH [restarted - 1 events]
MYSQL [restart failed - 1 events]
XINET [restarted - 1 events]
- System Summary:
LOAD [25.71 - status good - 17 events]
NETWORK [eth0 - online - 0 events]
- SIM Log:
[05/29/07 21:30:12]: XINET service is online.
[05/29/07 21:35:15]: LOAD 25.71 (status good)
[05/29/07 21:35:15]: NETWORK is online.
[05/29/07 21:35:15]: FTP service is online.
[05/29/07 21:35:15]: Error in http.chk, $LPATH_NT not found.
[05/29/07 21:35:15]: HTTP service is online.
[05/29/07 21:35:15]: HTTP url request failed, assuming offline.
[05/29/07 21:35:15]: HTTP offline, restart limit exceeded.
[05/29/07 21:35:15]: DNS service is online.
[05/29/07 21:35:15]: SSH service is offline.
[05/29/07 21:35:15]: Restarted SSH service (1 SSH events today).
[05/29/07 21:35:15]: MYSQL service is offline.
[05/29/07 21:35:15]: MYSQL restart failed, could not find /etc/init.d/mysqld.
[05/29/07 21:35:15]: XINET service is offline.
[05/29/07 21:35:15]: Restarted XINET service (1 XINET events today).
- System Log:
May 29 21:35:48 server smartd[2510]: smartd received signal 15: Terminated May 29 21:35:49 server smartd: smartd shutdown failed May 29 21:35:54 server xinetd[14167]: Exiting...
May 29 21:35:54 server xinetd: xinetd shutdown succeeded May 29 21:35:54 server bandmin: Shutting down bandmin:
May 29 21:36:01 server bandmin: [60G
May 29 21:36:01 server bandmin:
May 29 21:36:01 server rc: Stopping bandmin: succeeded May 29 21:36:05 server sshd: Stopping sshd failed May 29 21:36:06 server acpid: acpid shutdown succeeded May 29 21:36:07 server crond: crond shutdown succeeded May 29 21:36:07 server autofs: Stopping automount:
May 29 21:36:08 server sshd: succeeded
May 29 21:36:12 server xinetd: xinetd shutdown failed May 29 21:36:16 server xinetd: xinetd startup succeeded
===============================================================================
SIM 2.5-3 <sim@r-fx.org> 05/29/07 21:35:15
View 5 Replies
ADVERTISEMENT
Jul 29, 2008
If I have a company watching my integral services, do I need SIM? Are there benefits to keeping it and having outsourced monitoring alongside it?
View 5 Replies
View Related
Aug 15, 2007
Is it a good idea to use Microsoft System Center to monitor web hosting servers?
View 1 Replies
View Related
Aug 4, 2008
I use tripwire for a long time on my FreeBSD servers
one thing that's bugging me is that it takes like 20 minutes to check the system with the default config:
so I'd like to know:
1) is there currently some other tool that does tripwire job better?
2) anyone has a list of "probably changed files when a server is hacked", or something like that?
I mean, I'll be happy if tests can take 2 minutes instead of 20 and I detect intrusion 99% of the times instead of 99,9%
so "key files/dirs" would probably be enough instead of checking a lot of dirs with recursion
View 9 Replies
View Related
Jan 15, 2008
Are the following file from Cpanel? Cpanel just update itself (set to automatic update to stable release) and got the following file integrity check.
/usr/bin/chattr: FAILED
/usr/bin/encode_keychange: FAILED
/usr/bin/gdb: FAILED
/usr/bin/gdbserver: FAILED
/usr/bin/gdbtui: FAILED
/usr/bin/lsattr: FAILED
/usr/bin/snmpbulkget: FAILED
/usr/bin/snmpbulkwalk: FAILED
/usr/bin/snmpdelta: FAILED
/usr/bin/snmpdf: FAILED
/usr/bin/snmpget: FAILED
/usr/bin/snmpgetnext: FAILED
/usr/bin/snmpinform: FAILED
/usr/bin/snmpnetstat: FAILED
/usr/bin/snmpset: FAILED
/usr/bin/snmpstatus: FAILED
/usr/bin/snmptable: FAILED
/usr/bin/snmptest: FAILED
/usr/bin/snmptranslate: FAILED
/usr/bin/snmptrap: FAILED
/usr/bin/snmpusm: FAILED
/usr/bin/snmpvacm: FAILED
/usr/bin/snmpwalk: FAILED
/usr/bin/uuidgen: FAILED
/usr/bin/wbemexec: FAILED
/usr/bin/xmlcatalog: FAILED
/usr/bin/xmllint: FAILED
/usr/sbin/ext2online: FAILED
/usr/sbin/filefrag: FAILED
/usr/sbin/mklost+found: FAILED
/usr/sbin/snmpd: FAILED
/sbin/badblocks: FAILED
/sbin/blkid: FAILED
/sbin/debugfs: FAILED
/sbin/dumpe2fs: FAILED
/sbin/e2fsck: FAILED
/sbin/e2image: FAILED
/sbin/e2label: FAILED
/sbin/findfs: FAILED
/sbin/fsck: FAILED
/sbin/fsck.ext2: FAILED
/sbin/fsck.ext3: FAILED
/sbin/logsave: FAILED
/sbin/mke2fs: FAILED
/sbin/mkfs.ext2: FAILED
/sbin/mkfs.ext3: FAILED
/sbin/resize2fs: FAILED
/sbin/tune2fs: FAILED
View 5 Replies
View Related
May 20, 2014
I wrote a script to test the integrity of my DNS and run it from time to time on my server...
I just ran it today and it discovered I suddenly have 5 domains with SOA-records that doesn't point to itself. They point to the secondary nameserver.
They are records that exist for years and were for sure correct before (I know this because of that script).
If I do a "restore defaults" it isn't corrected and if I switch to slave and then back to master it doesn't change either...
The file /var/named/run-root/var/obfuscated.com is updated, but the slave-DNS stays in that file...
The only way I'm able to correct it is by deleting the NS-record with the slave DNS and adding it again.
I assume there's some mechanism that scans the NS-records and then decides to make that one the SOA. This has always worked fine... also on this server.
View 6 Replies
View Related
Jan 6, 2009
I have 35 clients hosting on my dedicated server.
I am going to be ending my service as a host provider, and I need to transfer all of my clients to a new host.
Many of my clients sites were written 3-4 years ago in php while global vars was still off, and so many of the sites might not function correctly if I just pop them to a new host.
My first solution would be to bypass the php .ini file with a public_html/ based ini that would override any newer server settings.
Does anyone know of a good host that could take my clients? And also support the php version locally to the shared account?
I need a host that is reliable, and honest.
Am I going about this the right way?
I am open to any suggestions or advice on this.
I should probably add, all of my clients pay on an annual basis from $89-$140. None of my clients run video sites or any heavy media stuff.
View 11 Replies
View Related
Jul 30, 2006
Dedicated server has 2 HDD but I am not going to pay another $25/month for the hardware RAID solution (already stretched too far).
My plan is to install FreeBSD 6 and use Gmirror to establish a raid-1 "soft" mirror.
Advantages: Entire drive is mirrored including the OS. Drives can be remotely inserted or removed from the mirror set using a console command so its possible to uncouple the mirror and perform software updates on a single drive then re-establish the mirror only after the updates have proved successful.
Disadvantages: Lower I/O than hardware solution (not a problem for me) others???
I rarely see people consider software raid for a tight-budget server and I am wondering why? Could it be that other OS's dont have a solution as good as gmirror? Or is it just that crappy soft-raid in the past has left a bitter taste in admins mouths? Or perhaps admins need the extra I/O of hardware?
View 3 Replies
View Related
Dec 30, 2014
When I am syncing plans with subscription, it shows
Error: SQLSTATE[23000]: Integrity constraint violation: 1062 Duplicate entry '16-servicePlanId' for key 'PRIMARY'
Which table should I check for the problem in mysql database?
View 2 Replies
View Related
May 28, 2009
if you use a site monitoring service (or two) do you need to setup monitors for each website/domain on your VPS or can you just monitor the primary services on the VPS?
Pluses/Minuses for either way?
View 3 Replies
View Related
Oct 7, 2009
I have a windows vps and I want to monitor my bandwidth. How can I do this? I tried using a program called DU Meter but it's counting bandwidth on all users on that node and not mine =[
View 6 Replies
View Related
Feb 26, 2009
Can you recommend a method to check ram usage of my vps for the last 24 hrs?
View 7 Replies
View Related
Jan 7, 2009
I want to monitor my application to make sure it is 24x7 uptime, if there is anything interrupt, I will be notified by email/SMS right away. There are several web monitoring service, but they all monitor ports, not application. I have bad experience, like, althoguh the web server is alive, but the application is already dead.
So, I want to monitor application instead of monitor a port. Anybody knows where I may find this kind of service?
View 2 Replies
View Related
Apr 26, 2009
i want to monitor my server. i try mrtg buti cant install it. so how can i monitor my server?
View 14 Replies
View Related
Aug 6, 2008
I know cacti / MRTG can produce traffic graphs, but how you actually get Cacti to graph the VM's on a physical server?
View 9 Replies
View Related
Mar 4, 2008
What does everyone use to monitor their servers? I've come across a pretty impressive service from Panopta but haven't head of them before. Has anyone tried them out?
View 11 Replies
View Related
Jun 30, 2008
I want to be able to monitor (with statistic) and cap traffic on 3+ servers.
how is this done best?
I was thinking of somekind of switch or server set inbetween the servers and the internet monitoring and keeping data on the traffic use etc.
but what do you do?
and how to make such a monitor redundant so if it fails the network is not cut off from the world?
View 12 Replies
View Related
Jul 10, 2007
Does any one know a bandwidth monitor that shows me stats and which programs or Ports and or Servers are using bandwidth and how much they are using in real time?
View 11 Replies
View Related
Dec 2, 2007
I see a lot of web hosts that link to webhostingstuff.com which tracks the uptime of their main page. i would like to offer a similar service, where i track and list the uptime of hosts. can anyone point me in the proper direction for this? is there a particular script that I can purchase? how is this done?
View 9 Replies
View Related
Apr 2, 2007
Don't know if this is the right place to ask for this but here goes.
I have a 20U rack space and i use 4U of this space (1U + 2U servers and a 1U switch).
There is a 20Mbit internet connection on a 100Mbit network.
But here comes my problem, some friends have there servers in my rack space to, There is 12 servers that are my friends and i want to know how much traffic they use.
I want to know how many GB traffic they use to i can charge them (they don't pay right now).
2 of my friends servers must max take 50gb traffic!
Is there a switch that can do theys two things?
Show traffic and limit traffic?
View 7 Replies
View Related
Aug 25, 2007
My server has a tyan thunder 8kse (s2892) motherboard, and i'm looking for some script to monitor it. Unfortunately, tyan only offers such applications for windows. So, how can i monitor the motherboard in linux? Or preferably, webbased.
View 1 Replies
View Related
Jul 24, 2008
What VPS should I need for backup dns bind and nagios for monitoring (ram, bandwidth etc..) ?
And from where should I choose?
View 5 Replies
View Related
May 26, 2007
I just setup my own LAMP server.
It is only used for my own domains so I want to be able to watch all mail that gets sent from my server, via php or otherwise.
Basically I just want to be able to personally monitor what mail is getting sent from my server so that I can watch for possible spammer activity.
I am using postfix and webmin.. I have sendmail installed to, but I don't think it is getting used..
I guess theres got to be a log somwhere... but I am not sure where it is?
I have postfix set to CC me of all mail that gets sent but, it doesnt seem to work all the time.. just for certain things..
View 3 Replies
View Related
Oct 4, 2009
We have a few customers who have multiple C classes with us and we are wondering how most of you monitor for blacklisting.
We currently randomly pick a few IPS and check them once a month but this is not very thorough. We were wondering if there is a program out there that can check say a /20 automatically once a month or atleast something we can initiate an automated check once a month with?
View 5 Replies
View Related
Oct 23, 2009
I am wondering what services it is best to monitor with Nagios which I've installed on my Centos 5.3 VPS. I wish to monitor and understand all essential services of the VPS itself at this stage but, generally, to make the best possible use of Nagios as an analytical tool as well as basic monitoring notifications, etc.
I already have a rough idea based on the main services being run. But I imagine there may be more to this than meets the eye, in particular, in view of any potential performance cost, etc.
I am especially keen to obtain as detailed a picture as possible concerning performance related criteria with a mind to indicating possible improvements that could be made.
View 8 Replies
View Related
Jul 22, 2009
I would like to monitor traffic on IP based on my debian server. I have 16 IPs on my server? Is there any good tool or any tool which gives GUI display?
View 4 Replies
View Related
Jun 21, 2009
Just built my homemade server rack and I have 6 newly acquired 'used servers' and an old and very heavy monitor with keyboard.
How can I best hook up the monitor/keyboard to multiple servers and just switch them? Is there such a thing a 'switch' for peripherals?
I would need plenty of connection cables not doubt.
View 3 Replies
View Related
Mar 29, 2009
How is it possible to monitor the data used (in and out) for each node in XenServer?
View 14 Replies
View Related
Mar 2, 2009
We have a website that uses php include. It is specified in .htaccess to parse all html file to parse for php so php include can be executed.
We don't know the exact cause but our Addhandler line in .htaccess gets keep commented by someone or something and include file (footer) does not show up from time to time. I was told cpanel update inserts the comment but I am not sure.
My question is:
1. How can I prevent this from happening?
2. If it gets modified, how can I get notification?
View 9 Replies
View Related