Help setting up ftp on remote linux box?
I got a real good deal on a cheapo server, it has no cpanel, default ftp, or any of that stuff.
how to remotely setup an ftp account on that server?
It would be easy if it had cpanel, but i have no idea how to use linux, guess its time to learn a few things.
i am trying to setup a remote sql server , the web server which runs everything but sql is cpanel/WHM and the SQL server is Centos 5. I have installed mysql on the SQL server and it is running.
When i put the information in cpanel for remote sql setup it comes up with an error of :
usr/bin/mysqladmin: connect to server at 'IP Address' failed error: 'Host 'hostname' is not allowed to connect to this MySQL server' mysql has failed, please contact the sysadmin (result was "mysql has failed").
Is there something i have to enter in the remote sql server to allow the IP address of the cpanel server to be able to connect to the SQL server?.
I'm a little familiar with Linux, but I need help setting up a second drive that is in the server I'm leasing from Layered Technologies. It's a self-managed server so they won't even TELL me how to do it.
I need to format the drive and mount it as /backup so I can setup WHM/Cpanel to use it for backups.
What commands do I need to type to format the drive with the right kind of partition and mount it as /backup?
Linux Remote Desktop using NOMachine..
This Is newbies Guide for Linux Remote Desktop using windows XP, This is basic guide. I will Update from Feedback from community..
Download Install NX Free Edition for Linux..
I am upgrading my current colo'd server from a 1U dual core xeon with 2x500GB drives to a 2U core 2 quad with 8x750GB drives (raid5).So far I have ran into two issues. One is the rails are too large for the cabinets (problem #1 which I put in another thread). The only other problem is I am having problems with remote console on the new hardware.
It should be setup correctly since I basically rsync'd everything from the old server to the new one. The device is detected:
root@houkouonchi: 03:19 AM :~# dmesg | grep -i tty
Command line: root=/dev/sda2 gpt pci=nomsi console=tty0 console=ttyS0,9600 notsc
Kernel command line: root=/dev/sda2 gpt pci=nomsi console=tty0 console=ttyS0,9600 notsc
console [tty0] enabled
console [ttyS0] enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
But when I connect to the digi I am not getting any console output. I have tried a different serial -> Ethernet adapter and tried a different patch cable/port on the digi so I am pretty sure those are fine. The motherboard (nforce 650i chipset) didn't have an onboard serial port so I am using a port hooked up to a bracket which has a ribbon cable which connects to the motherboards COM port. I also tested another serial connector which the case has built in and both give me problems.
Maybe the motherboard is just busted?
I'm thinking about putting a server in a colo where the Datacenter is a 4 hour drive.
My question is: "Do Linux machines running LAMP hang / freeze often so that you cannot force a reboot remotely ?" - "Does it even happen on Linux boxes?"
I have a lot of experience with Windows machines but none with Linux. With a Windows machine I for sure would have to purchase a DRAC/LILO board.
Unfortunately, I don't have any production experience with Linux so I don't know the risk of having to go on site because Linux decided to completely freeze making remote management impossible. Of course this is not included any hardware outages.
about connecting to linux desktop, but can you actually use it like a desktop functionally?
Like remote pc or windows remote desktop?
Ive seen it on Windows VPS, is it available or possible on a linux (CentOS) based VPS?
find it more comfortable working within the gui than the shell.. and just wondered if possible
I've searched the web to set up ssl on 1 domain of 2 installed op 1 ip address. It seems easy: setup virtual hosts, turn ssl on and point to your certificates.
I'm completely lost. I setup the certificate from geotrust in plesk panel 11.5 as described in the manual but that didn't work, apparently because i have 2 domains and 1 ip.
So i started looking to adapt my vhost settings to use sni. First problem: i can't find the setting of the virtual host.
Secondly where can i find the path to the .key and .crt files.
How i can install a ssl certificate on one of the two domains sharing 1 ip.
I know that Windows RDP Hosting is not a new Idea, but has anyone tried it with Ubuntu. I do have VNC Access to the server, but that only allows me to authenticate with a password, I need username and password.
What would be the best remote application for this?
How can setup remote desktop in linux (fedora or centos) for get remote desktop access to linux server with windows clinet?
View 4 Replies View RelatedMy hoster told me to use PuTTY, a terminal, to install something called a vnc. I tried to install it ,but gets rejected everytime I connect.(I was using realvnc and connecting through a tunnel) Is there another way to get to the GUI or something like that?
I am using Vista and trying to connect to Linux (Debian)
I am trying to get to grips setting up websites / email without the help of a control panel.
I am running centos and have managed to suss out the httpd.conf file enough to set up webspace but have no idea where to start on setting up a email server.
Any places where there is a step by step newbie guide that goes down to showing me how to add email users etc appreciated.
If a create a subscription on a plesk Server through the API don't know how to specify the preferred domain and it's always set to domain.tld. I would like to set it to none for all.
My xml request:
Code:
<packet version="1.6.3.0">
<webspace>
<add>
[Code].....
I know we can get remote Desktop connection only on those servers based on Windows 2003 OS or Windows 2008 OS.
But what about Linux? Can I have such remote desktop connection on CentOS 5?
Another question is, what is nxclient?
[url]
Im bit confused. Can I get remote desktop connection of Linux OS ( CentOS ) on my Windows XP by using this software?
[url]
I have been trying to run mozilla and/or firefox commands on my centOS linux box for the last 2 days but I just cant figure it out. I nstalled XVFB which is a virtual X environment but when ever I issue a mozilla command such as mozilla -width 1024 it always outputs the same error: (mozilla-bin:32001): Gtk-WARNING **: cannot open display:
I dont know what the problem is or what im missing..what I need to install etc...can anyone shine some light on this?
All my Backups to a remote FTP fails with Error Code: 1
View 4 Replies View RelatedSince moving to version 12 on the remote FTP backup is not working.
This makes the tar of 50K ~
We have chosen "Setting and content domain" ...
I changed the DNS parameters of the default domain service plans to slave.
But where can I set the default master server, I didn't find it.
I have two VPS with two different Datacenters. I am running my website on one of the VPS which has Plesk Panel 11.5 installed on it. Since my second server is not in use, I would like to use it as a Secondary DNS Server for redundancy. I know this can be done with Plesk Expand. But, I am not in a position to invest further as I just run 4 domains on my main server. I was looking at installing some free control panel on my secondary VPS and set it up as a Secondary DNS Server if possible. But, I could not find any Guides on setting this up.
How I can do this? I see that we have an option in Plesk - 'Switch DNS Service mode' which can be used to either setup my first server as a Secondary or Primary. I have installed Webmin/Virtualmin on the second server, but how to set this up perfectly. I can reinstall the 2nd Server if required, but not my first one with Plesk.
I have a client with a download file on 146 MB.Download speed is pretty slow and timeout out around 70MB..
View 2 Replies View RelatedIn Fail2ban (great idea to include it in plesk!) settings you can set "Time interval for detection of subsequent attacks" (findtime) in general. But it would be interesting this setting per Jail.
You could have 2 jail with same filter but different findtime. Example:
Jail 1) 5 failures in 600 seconds: 1800 seconds ban
Jail 2) 30 failures in 86400 seconds: 604800 seconds ban
There are bots that detect if you have some protection fail2ban or similar and it will adapt, login attempt every 300 seconds for example. Jail 1 no detect this attack, but Jail 2 yes.
See the example, live time :
[root@--------- log]# cat /var/log/maillog | grep 'warning: ---------'
Jul 14 07:10:54 --------- postfix/smtpd[5482]: warning: ---------[--.--.--.---]: SASL LOGIN authentication failed: authentication failure
Jul 14 07:54:16 --------- postfix/smtpd[4782]: warning: ---------[--.--.--.---]: SASL LOGIN authentication failed: authentication failure
[Code] .....
After a fresh install of Plesk 11.5 am unable to FTP the server.
The FTP client shows that successful but no file in the remote server and its lock I saw only / I cannot stroll the client on remote server
Site builders work ok, Wordpress and built software update and publish...
I have Plesk installed on the master nameserver ns1.example.com, the dns slave manager extension installed, a working slave ns2.example.com and Plesk installed with working WHMCS autocreation of customers and subscriptions on a shared hosting server web1.example.com. I feel there's probably something obvious that I'm missing, but I can't figure out how to autocreate DNS records on ns1.example.com for customers on web1.example.com when new accounts are created.
View 2 Replies View RelatedSince upgrading to 12 (Linux) all backups to remote storage now cause timeout in curl. Is it possible to change the timeout anywhere?
To be more precise, when testing FTP settings receive this error:
Transport error: unable to list directory: Curl error: Timeout was reached
I have a server that I use to host my primary domain, and I have a cople Plesk servers, now I updated the hostnames of all the servers like
Code: s1.de.myserverplace.de
Now when the plesk server sends a mail it goes in spam always,
In the SPF records of the primary domain sits this
Code:
myserverplace.de. IN TXT "v=spf1 a mx a:myserverplace.de a:s1.de.myserverplace.de ip4:148.251.100.157 ip4:144.76.163.46 ip6:2a01:4f8:201:81b8::60 ?all"
But when I actually send the mail in the headers of the received mail I get this.
Code:
Received: from s1.de.myserverplace.de (s1.de.myserverplace.de. [144.76.163.46])
by mx.google.com with ESMTPS id p2si2158952wjy.73.2015.05.14.04.09.17
for <mymailtestacount@gmail.com>
(version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128);
[Code] ....
How would I set this up so this doesn't happen?
I have an AMD Sempron(tm) Processor 3000+ machine thats running Linux - CentOS.
I was wondering if anyone could recommend a good server/hardware monitoring script or app that will allow monitoring of the following items in real time. Also I'd like to
log and view the historical data. A script that stores this data in mysql database would be ideal.
Processor Temperature
Hard Drive(s) Temperature
Ram Usage - Overall
Ram Usage for each running Process/Service
CPU Usage - Overall
CPU Usage for each running Process/Service