Since upgrading to 12 (Linux) all backups to remote storage now cause timeout in curl. Is it possible to change the timeout anywhere?
To be more precise, when testing FTP settings receive this error:
Transport error: unable to list directory: Curl error: Timeout was reached
All my Backups to a remote FTP fails with Error Code: 1
View 4 Replies View RelatedI experienced an issue using an external backup repository on Plesk 12.0.18 machines using ftps. The ftp server uses ftps (explicit) connections.Plesk 11.5 works fine (and ordinary ftp client like Filezilla as well), Plesk 12 throws the following error when trying to add the server via the web interface:
Code:
Curl error: Login denied
Unencrypted connections will work. Plesk 11.5 machines (with the same settings) will work.
I've analyzed the problem and got so far: The backup manager tries to connect using "regular" transfer method + ssl, not ftp-ssl explicit.Is there a chance to force Plesk using explicit ftpes connections? Or is there another work around?Some additional infos about the (ftp) server: The ftp server is running ProFTP 1.3.4d, uses port 2000 for the control port and has a port range (2001 - 2100) for the passive connections.I tried to add the server using the address field of the gui IP:2000 and checkboxed "passive mode" and "ftps".
OSCentOS 5.6 (Final)
Panel version11.0.9 Update #61
The system is up-to-date; last checked at June 6, 2014 03:32 AM
I use pingdom to alert me when sites go down. It would happen only once every few weeks, and I'd just reboot the VPS from my provider's control panel, however in the last 24 hours it has started doing it more and more often. The only change I have made in this time is to delete a few unused web sites.
When I get alerted, I check the the domains and they won't load. I look at the plesk control panel page thought and that does work.
I can SSH in, but I can't see anything that might work in the messages log.
I removed the plesk control panel error as that only seemed to happen once and is not happening anymore.
I saw quite a few entries in the /var/log/secure log and so I added iptables rules to only allow SSH access from my own IP and to DROP all other requests. It seemed fine for a while, but after 12 hours it has started becoming unresponsive again until reboot.
I'm running a backup of a subscription and I checked "Create a multivolume backup" and set the "volume size" to 1024. Once the backup is complete the backup still shows as 1 volume, not broken up into 1 GB pieces.
I'm running Plesk 12.0.18 Update #27 (latest)
Since upgrading to v12* I have had issues backing up to my FTP repo, the errors are limited but how to come over it?I have searched and checked all common issues, space on drive, space on destination etc.
Errors I receive are:
[root@web01 backup-2014-09-22-08-32-24-354]# tail -f backup.log
[2014-09-22 10:09:52.790|24801] INFO: Transport: Init credentials for user ''
[2014-09-22 10:09:52.790|24801] INFO: Repository '/home2/backups/': Initialized
[2014-09-22 10:09:52.803|24801] INFO: Repository 'ftp://XXX//XXX/XXX/': Initializing...
[2014-09-22 10:09:52.803|24801] INFO: Transport: Get repository transport ftp://XXX//XXX/XXX/
[2014-09-22 10:09:52.803|24801] INFO: Transport: Init credentials for user 'XXX'
[2014-09-22 10:09:52.820|24801] INFO: Repository 'ftp://XXX//XXX/XXX/': Initialized
[2014-09-22 10:09:52.840|24801] INFO: pmm-ras finished. Exit code: 1
[10918]: 2014-09-22 09:09:52 ERROR 25eebacd-8f15-492d-8297-27d25ecb68b8 Can't upload file 'backup_info_1409220832.xml' to ftp. Error code: 1
[10918]: 2014-09-22 09:09:52 DEBUG Uploader output: Error: basic_string::_S_construct NULL not valid
No matter what I try this fails, I have a v11* still backing up without issues to the same FTP.
We get a lot of warning for one and the same domain during backups:
Code:
Warning: hosting "domain.com"
Encoding::encode: source UTF-8 encoding declared, but invalid UTF-8 sequence occured. Falling back to ISO-8859-1
How may we solve it?
I have recently wen't with a Windows VPS and am wondering the best way to do backups to a remote computer (hopefully without buying software). Any suggestions?
View 0 Replies View RelatedWe all know about backups, and compressing files, etc etc... so, what do you guys do in this situation?
I have a quad core, 4gb ram, 250gb disk, when I run cpanel backups to my remote server, the server loads go up to 3.
Is there any way I can control this and lets say... dont let it go bellow 2?
Improved Backup Performance â Speed is safe.
cPanelâs backup facilities in 11.24 have seen significant speed increases. In previous versions, load averages while backups were running could be as high as 3. With our reworked and enhanced backup system, load averages tend to stay around 1.2 when backups run on servers with many accounts. This is an extremely substantial performance increase that you and your customers will notice right away. With our new backup system, there is no reason not to keep your data safe."
My backup ftp server was down, how do I move all backups from server repository to personal ftp repository?
View 5 Replies View RelatedI use plesk Parallels Plesk Panel v9.5.4_build95110630.14 os_CentOS 5
I read here [URL] ....
But how can i change other disk?
I want change the default directory for backups in /dev/sdb1 disk.
my fdisk -l output this:
Code:
[root@server /]# fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code] ....
I'm migrating sites from Plesk 9 to Plesk 12 using the migration manager. Since the migration manager doesn't migrate backups, are the backups compatible between Plesk 9 and Plesk 12? If so, is there an easy way to copy the backups in the correct directory structure since we are forced to use clients in plesk 12 and it changes the directory structure of the backups folders.
View 2 Replies View RelatedWe use Plesk 12 with ubuntu 12.04.5 LTS ......
Plesk 12 does not create backups for Customers.
If we restarts the server, Plesk created again for 2 days backups and then again not. There are no errors present.
The backup should be loaded on a FTP backup server after the Create
This makes Plesk but only if you restarts the server. Otherwise, no backups are created or loaded on the FTP backup server.....
I've been running a Plesk server with around 100 domains for years and years now. I've always used a backup service provided by the server vendor, but with a new server, I wanted to consider some of the backup options built into Plesk.
1. It looks like Plesk/Acronis is dead or only for Windows. Is that right?
2. If I add a backup drive to the server, can I setup Plesk Backup Manager to store the backups there (instead of on the main RAID array)?
3. Are there any other 3rd party extensions that I should consider?
we are getting the following error message during our scheduled backup..Warning: mysql "wordpress_9"...Not all the data was backed up into /mnt/backup/web03/domains/domain.com.au/databases/wordpress_9_1 successfully. Use of chdir('') or chdir(undef) as chdir() is deprecated at /opt/psa/PMM/agents/shared/Storage/Bundle.pm line 39.
mysqldump: Error 2013: Lost connection to MySQL server during query when dumping table `backupdb_wp_commentmeta` at row: 717
After upgrade to Plesk 11.5.30 trying to set up FTP-Backup Repository:
Repository error: Transport error: unable to list directory: Curl error: Access denied to remote resourceClick to expand...
remote backup solution for all our cpanel account.. After a short google search, I stumbled on exavault.com..
View 3 Replies View Relatedcheap dedicated server for remote backups with at least 200GB hard drive and 100Mbps up/down connection and 1000GB transfer. It would be the best to be in US, but it can also be in Europe if speed from US can be at least 60Mbps.
The best I found is Hetzner (49 eur), but they are in Europe and they have a 99 eur setup fee which is too much for me.
It would be great that it's even cheaper than this, because this Hetzner server have a dual core AMD 5600+ CPU, 2x400GB HDD and 2GB of RAM, so because I don't need all that I was hoping to find even cheaper Celeron or Sempron with 200GB HDD and 512MB or 1GB of RAM in US.
I'm trying to setting plesk backups to own ftp server.. My ftp server is listening by the port 31..
My conf:
Server: mydomain:31
Directory: vpsbkp
User and password...
Passive mode checked
Here the error display: "Transport error: unable to list directory: Curl error: Couldn't connect to server"
Where are the bkp ftp logs?
I set up a FTP backup repository today however when attempting to restore selected objects from the backup there are a couple of messages that state:
"Restore the backup file despite a corrupted signature"
"You can select objects to restore only when you are restoring from backups that were created in Plesk 12.0 or later."
I noticed that the backup residing in the FTP repository has a .tar extension whilst the one I did in the server repository has a .xml extension.
Restoring selected objects from the server repository works fine.
Why is this not possible? I'd like to restore selected objects from the FTP repository. Otherwise I'll have to transfer the backup file from FTP repository to the server which is really inefficient.
Have some very important questions regarding changing plesk ports and creating full backups.
1. When changing plesks port number, what exactly will it effect? Will it effect auto updates, etc.?
2. When creating a backup, I'd like to backup the entire server to rollback at anytime when changes are made to core files, is this possible?
3. With backups, somehow I'd like to schedule backups to possibly make nightly copies to an external hard drive on my computer for a fail safe method just in case the server happens to crash and I'd need to restore to another server/service. How would this be possible?
If I try to download a plesk backup to my local machine it saves a file a few bytes in size in .xml.tar.html format
My other non plesk 12 machines correctly save the file in .tar format ....
Since moving to version 12 on the remote FTP backup is not working.
This makes the tar of 50K ~
We have chosen "Setting and content domain" ...