I do not need much bandwidth usage, may be just couple G a month.
want the CPU is good.
If you have a server that is not used and willing to give me a better price since I use little bandwidth.
I'm after some recommendations for dedicated hosts in London, UK.
My budget is reasonable (about £400 / month). I don't want a reseller, I would sooner go direct to a main host, someone reasonably large. Like The Planet but in London.
I want a very good reliable service (don't we all!).
I'm aware of Rackspace, but aside from that any recommendations welcomed!
I'm trying to find decent dedicated server providers in Seattle that run peer1 or internap - I've seen a couple good providers in Seattle however the tracert's don't seem to agree with a few locations.
I know of SPRY, Softlayer and then UbiquityServer which seemed really good minus their carrier (my tracert's go to san jose then seattle (I'm in Canada) along with a few other people on the west coast.
It's being used for gaming.. I'd like to see windows on the box as-well..
Under $200/mo would be nice.
I'm in the market to purchase a handful of dedicated servers here in the next few months. I'm looking for the most "bang for the buck". And preferably don't want to pay more than $700 - $800/server/month. I stumbled onto 10tb, I've been doing a little bit of research, and so far have not found any negative reviews other then people trying to user their vps servers from outside the US and expecting 1Gbps speeds.
Anyway, I digress, their price tags are definitely in my price range. About $638 for an 8core server 2.26Ghz 12GB ram 2x250hdd, 100mbps unmetered. Best deal I've seen yet.
So far I like what I see with 10TB but i want to verify that I can expect to get the results I need. I've talked to support and they say it is dedicated bandwidth which means I can burst into 100mbps for long periods of time. I care about this more than anything. Most of these servers are going to need that connection, and I expect to max it out quite often. We plan on launching several game servers so bandwidth is definitely a necessity.
I will also be hosting our web-servers as well and will be looking to deploy load balancing when the time comes. So I would also like the ability have these servers in a private vlan.
Are there any 10TB customers out there using their 100Mbps unmetered plans with heavy loads? I know soft-layer has an amazing network. I just want to make sure this is dedicated bandwidth and I can loadup the port for days if needed. Without experiencing problems, server being shutdown, or extra fees coming into play.
I can probably expect to be at a normal load of about 60% or more bandwidth usage per server.
10TB really stands out to me because its on soft-layers network, and they have 3 different locations I can locate these servers. Which since we'll be deploying game servers is great to ensure low pings to all our clients.
I am open to looking at other hosts as long as they can provide me with the above requirements. I'm very interested in what 10TB costumers have to say.
Hi, I'm looking for a Windows VPS provider, ideally physically somewhere in the USA, that accepts payments by PayPayl.
I would go with a plan from RackForce for $59 USD (dds200-W) but unfortunately they don't accept PayPal payments.
I think I have spent over 20 hours searching for an adequate Windows VPS package, only to find terrible reviews of each company I find. I have little-to-zero experience in programming and web development, but I had an idea for a video sharing site that I am seeing through. SO, I hired a programmer friend of mine to develop the site, only to discover he works exclusively with ASP. That has caused frustration, since I would have probably gone with KnownHost long ago.
good Windows VPS for a new video-sharing site, meaning there won't be many users for the first 3-6 months (so 10GB or less disk space should even be enough). I need fast transfer times, mysql, and streaming video capabilities. My friend is utilizing his own CMS, so not sure if I need plesk or the like.
Sites I've been looking at: UltraHost, JodoHost, 3dgwebhosting, WebIntellects. My budget, sadly, is no more than $60/mo, but that's just for the first few months since I don't expect many visitors and don't want to waste money on features I won't need yet.
I am asking for any advice, preferably from third-party users (not companies themselves) on what is the most reliable, features-oriented site that will suit my early needs.
I have Plesk 11.5 (service provider mode) on a Windows 2008 server IIS7.Most of my sites are developed in .asp and therefore i use a custom 500-100.asp error page that check s the IP of the visitor then displays either a friendly error, or if its my IP a full error of what has happened (it also emails me the error). This allows me to debug pages easily whilst developing and to keep an eye on anyone trying SQL Injection hacks on my sites (as the error and email also have session variables and IP address).I dont have root access to the server as it is a Webfusion dedicated server.I have following the Plesk documentation -
1) Switch on custom errors for the subscription
2) Look in virtual directories and navigate to error documents
3) Find the error in question (500:100) and change it to point at either a file or URL
FILE - I had the data centre add in the 500-100.asp error page in to the virtual template so that my page is available in the list of virtual files - this didn't work but that maybe because its not a static page??
URL - when i add the path it says its incorrect, if i add a fully qualified address, it accepts it but it doesn't work.give me a specific example of the URL that can be entered relative to the root as the format in the documentation isn't accepted. The last step is to restart IIS which is also an issue as i cant seem to do this from the Plesk panel..It is as if it isn't catching the 500:100 error, and only catching the general 500 error??
I've been asked to source a good Windows Server.
Must be able to source Graphon's Go-Global software (Graphon dot com/content/view/9/9/ )
Should be UK based if possible and allow us access to install the software.
I want to start a VPS service for our customers, I am looking for a managed server provider that can provide economical server for VPS any one has any idea?
View 13 Replies View RelatedA firewall will run me another $100. Is it worth it? Do any of you run a Windows server w/o a firewall.
View 3 Replies View RelatedWe've always used open source linux servers up until now. For a variety of reasons we're contemplating adding one windows box.
Is there much practical difference for the average small business between 2003 and 2008?
What's the difference between "authenticated" and "unauthenticated" windows servers?
How is most administration and regular tasks done? I'm used to sshing into my linux servers-- I'm assuming for windows this is gui based? What's the standard software used for this?
Can I run both Windows & Linux on a dedicated server? I currently have a website hosted on a shared hosting Linux web server (uses PHP, MySQL). I want to use RED5, which seems a bit tricky to set up.
Why Windows?
I would feel more comfortable installing RED5 on a windows server (I think it'd be easier for me, no experience with Linux command line etc.).
Why Linux?
I'd prefer to keep the existing PHP/MySQL website on Linux because I have Apache specific settings.
I am using linux dedicated servers, but I want to move over to Windows for some stuff I run...
Anyway, I need ideally 1000-1500gb bandwidth on 10mbs connection, ram&cpu is not important as they're very simple things but requires a lot of bandwidth. Location in Europe or USA, but whatever is cheaper...
Budget is anything upto £60/$120 a month.
I own a hosting company Perix Host. We are looking into moving into gaming server hosting.
To do this i need a dedicated server with Windows because the main gaming server we want to run (LFS) only works with Windows if you want your customer to be able to upload there custom wrote plugins. So my issue is i need a dedicated server. What do i get.
How much bandwidth would i need to host around 20 servers all running with 15 people on them. Im not sure of how much bandwidth the game uses but i could find it if anyone needs it.
I am a good systems administrator but I have never setup a windows web server. Are there any tutorials out on the web that would show me how to do it. Is it true when a dedicated server is purchased the only thing I have to do is transfer the htm or asp files?
View 3 Replies View RelatedI need 2 dedicated DNS servers.
I'd like one server on the east coast and one on the west or close to it.
They will be used for primary ans secondary dns only.
Simply running Bind and webmin.
I need cheap servers since they are pushing dns data around.
Not very bandwidth intensive or cpu resource intensive.
The most important thing is that the backbone redundancy is amazing.
You can get a good server at a lot of place these day, but who has the staff and backbone to make sure these servers are not bottlenecked and up and running.
i run a linux server with the planet it comes with ensim installed.
as some of you probabley heard about the fire at the planet and they offered to move my server to another facility but they have to change the server ip address which i agreed to it
the server is back online but i'm unable to acces any websites
i asked them to point all domains to the new ip address but they are really busy and i assume it would take a day or 2
when i login to ensim and list all sites i still see the old ip address listed under each domain, do i need to change that if so how?
will everything work once the they modify dns records?
I've searched quite a bit for myself now, but I have yet to find a place that offers what I need. Most of the servers seem way too overpowered for my needs, but the lower-end server offerings I've found don't have the necessary space and/or bw.
What I'm looking for is something along these lines:
I basically only need to run Apache/Lighthttpd, PHP and MySQL, along with a custom program that would only use 1-2% cpu at its peak and not more than 1mb memory. The web server part would probably not serve more than 10-20 simultaneous visits at its peak.
CPU and memory requirements are therefore very small for me. However, I need 10gb space at the very least, along with ~200gb bw.
I would preferably like the server to be located in Europe, or have very good connectivity to Europe, as I need as low pings as possible.
Unmanaged and no control panel needed.
if it's possible to have unlimited RDP(Remote Desktop Profiles) on a Windows Server 2003/2008 or a number that is around low xx. If so what companies offers this service?
View 10 Replies View RelatedIs it actually possible to find Windows dedicated server with unlimited traffic (1Gb Pipe)and reliable 24/7 technical support? Cause I have searched and found out that if the traffic is unlimited the pipe is too small, and if the pipe is big enough traffic is limited and additional one costs a fortune.
View 7 Replies View RelatedI'm starting a multi-gaming organization and I'm hoping to run 3-4 servers at 1000FPS. The server i purchased is a Core2Quad 2.4, 4GB Ram, 500GB HD, 100MBIT windows 2008
I also purchased a TCAdmin license and have that setup and running. I know about the windows media player trick that makes it run at 500FPS and ive been doing that. Well i would like to get it to 1000FPS but ive been unsuccessful. Ive tried some reading about HPET but i havnt seen where i can change or enable that. what i can do to make them run at 1000FPS.
Dont know if this helps but the servers im hosting are CS 1.6, CSS and TF2.
Can some please suggest best and cheap dedicated server for live video streaming for 300-400 users.
View 14 Replies View RelatedI usually host just PHP but a new client needs to use ASP and SQL Server. So I urgently need to find a UK based reliable Windows Managed Dedicated Server for around £100 to £150 per month.
The site only gets 1000 visits per week and runs a multi community from a 500MB SQL Server database.
I'm scared to go with a cheap host like 1&1 or Fasthosts but also think Rackspace may be way too expensive.
Is a dedicated server overkill for such a site?
Anyone know of a solid relaible host that can offer this with great 24/7 skilled support and daily backups.
I need to have a solution for client by Tuesday or they may go elsewhere.
I have a domain and i have an ip address 111.111.11.1 which is free to be used.
I would like to assign that ip address to domain name so at the end when i enter 111.111.11.1 in my IE address bar it takes me to
I am new to windows server I would appreciate some help
I need to change the IP to a server dedicated Windows with Parallels Plesk installed and 200 domain's hosting.
Do I have to change the IP in the dns zone one at a time? I think it's possible to do it by reconfigurator (remote desktop).
We have a Fasthosts Dedicated Windows Server and I now need to run a PHP script to enable us to use a online enquiry form. I have contact Fasthosts and the are not able to advise how to enable/use these scripts as it falls outside the support package.
Does anyone know how to enable or make it work in the Matrix Control?
The error i get is:
The page cannot be displayed
You have attempted to execute a CGI, ISAPI, or other executable program from a directory that does not allow programs to be executed.
Please try the following:
* Contact the Web site administrator if you believe this directory should allow execute access.
HTTP Error 403.1 - Forbidden: Execute access is denied.
Internet Information Services (IIS)
Technical Information (for support personnel)
* Go to Microsoft Product Support Services and perform a title search for the words HTTP and 403.
* Open IIS Help, which is accessible in IIS Manager (inetmgr), and search for topics titled Configuring ISAPI Extensions, Configuring CGI Applications, Securing Your Site with Web Site Permissions, and About Custom Error Messages.
* In the IIS Software Development Kit (SDK) or at the MSDN Online Library, search for topics titled Developing ISAPI Extensions, ISAPI and CGI, and Debugging ISAPI Extensions and Filters.
Code:
Error: Unable to reconfigure web server. websrvmng failed: Site MailEnable WebMail does not exist at IIS7WebSites::get() In IIS7NativeProvider module Exception type: System.Exception at IIS7WebSites.get(IIS7WebSites* , auto_ptr* , Int64 id, basic_string,std::allocator >* idnName)
Windows Server 2012
Plesk 11.0.9 Update #62
Note: Recently migrated from Plesk 9.2
Trying to set Default Site for a Dedicated IP Address.
I go to Subscription, then to domain > Change Hosting Settings, select dedicated IP address and OK, works fine. Site goes to Default Plesk Page.
Go to Tools & Settings, IP Addresses > Select the dedicated IP address I set above. Change Default Site to site above. Click Ok.
I get the error message above and nothing changes.
I looked on my IIS Server and MailEnable's Webmail is installed under the Default Website.
I have another Dedicated IP on this server and it has a default site on it working properly, but it was set up on the old site and it was configured as part of the Migration using Migration Manager.
I tried deleting the IP address and adding it back in. That didn't change anything. I also tried running: "%plesk_bin%websrvmng.exe" –reconfigure-webmail since that came up under someone else's issue when searching the web and that .exe is what's throwing the error.
I have an extra tower server (Dell sc1430) that I'd like to colocate in Seattle. Anyone have a suggestion of a company that would colocate a tower in Seattle?
View 7 Replies View RelatedIf capacity was not an issue, where would you buy a rack in Seattle?
View 14 Replies View RelatedHave 2 questions
1. How about the quality of Cogent in Seattle?
2. Where can I buy Cogent there? Looking for 100mbps commit
new Colo provider in Seattle to replace the one that we currently have. My company runs game servers.
I'm looking for an affordable location that can provide the best support possible for the price. Typically the only thing that we need is someone to reboot a server periodically, so if someone offers remote reboots that would be ideal. I'd like to start out with a single 1U server to make sure that we like the location and network before expanding. We'd use about 5 Mbit/sec per server approximately.
I've reviewed the posts about Seattle and UbiquityServers.com was recommended a few times. Does anyone have any other suggestions or any experience with UbiquityServers.com that they could share?