I have a Drupal install on my host and I'm wanting to use my free .co.nr domain as the main url but the site is located at a sub domain mysite.myhost.org. I want to be able to use mysite.co.nr but once I browse my site all link inside are mysite.myhost.org/something instead of mysite.co.nr/something
How do I go about change this? I don't have too much access to Apache or in depth settings so is it possible to do this through the htaccess? Something like changing the base url?
I have Squirrelmail installed on a VPS running CentOS with ControlZX as a control panel and I'd like to replace it with Roundcube. What I'm trying to do is make it so that the Roundcube webmail application is accessible through every domain on the VPS (e.g. domain1.com/webmail , domain23.com/webmail) without having to manually install it on every domain separately. Also, because I have resellers hosted on this VPS I don't want to just install Roundmail on our main domain and provide that as the official webmail access area because then our reseller's customers would have no choice but to access their webmail via our domain. For obvious reasons most resellers would prefer to keep their provider's presence in their own business transparent.
I know Roundcube supports "virtual users" and have a basic understanding of how that works, but I am unsure how setup Roundcube so that it can be accessed from any domain on the box. Where should I install it?
I've heard plenty of users talk about using Roundcube as a replacement to Squirrelmail so I have to assume it can be used in the way that I'm talking about (that is, not needing to be installed on every individual domain manually).
For those of you that have done this, can you please describe how you accomplished it?
I also don't have a problem hiring someone to help us complete this but am still interested in knowing how to go about it.
Our DC is replacing our hard drive and doing an OS reload... how long should this take? Its been 60 minutes already, I was expecting it to take between 1-3 hours.
Can anyone fill me in on their previous experiences?
I am replacing the default certificate in Plesk so that customers do not get a certificate warning when visiting the panel login page.
I've created the certificate in the "SSL Certificates" section made it default and used it to secure Plesk. However I've still got all the existing domains using the old default certificate, how can I do a mass changeover so that all existing domains are now using the new certificate?
I've updated the IP's to use the new certificate. When I go to "SSL Certificates" in "Tools and Settings", it seems that there are some domains now using the new certificate but quite a lot of the other are still not, how can I get these over too?
I have a scheduled backup set on my panel, to backup all server configuration and content, and is set to run every week. I also set to keep only 1 backup on repository, but this config doesn't seem to work! My hard drive is getting full all the time, and when I check that its because theres a lot of old backups stored that are not getting removed!
My question is: the backup script removes the old files only at the end or it does it while backing up? If the action of removal happens only at the end of the script, i think it would explain why it isn't working: my hard drive gets full before, and the script drops an error, and never get to the end of it and it doesn't remove the old backups.
My Version: Parallels Plesk Panel v11.0.9_build20120609.17 os_Windows 2008
I want to try something different on our methods of replacing or upgrading hard drives.
I want to be able to do most of it via our KVM/IP instead of babysitting the server(s) for so long in the DC.
My thoughts are, how can I add the new hard drive in the DC, and move the data over via the KVM/IP. Can this be done with just a raw drive added (no new setup) using DD or even rsync, or is it better to setup a new installation of CentOS on the new drive, and use rsync to move the data over. Then how do I get the proper drive to boot until I go back into the DC to remove the bad or old drive? I'd be interested in how some of you folks are doing this, as far as what's easiest and could be done over the KVM/IP once the new drive is connected.
Or on systems that have 2 drives with cPanel/WHM, how can we temporarily on an emergency basis untilize the backup drive to do a new setup, copy the data over from the drive that is failing, then just replace the bad drive as a backup drive next time you go in the DC? We have an external USB CD in place to allow remote installs...just curious if anyone does something like this or has ideas how we could make this work.
We use cloning software now, but can end up babysitting a clone for a long period in the DC like this.
If there is a failed drive in RAID-1 running on Dell 2850, FreeBSD 5.4, can I just take out the failed drive and replace it with a new one, while the server is running? Will FreeBSD cope & rebuild the drive on the fly?
When I hit my server's domain it redirects me to one of the hosted sites' domain with a 302 redirect. It used to return the default plesk server page. How can I cancel the redirect?
OK, I am confused. I have one domain that is parked on top of another domain. I would like Mail that comes to the parked domain to be automatically forwarded to the same user name at the primary domain.
Can I change a DNS or MX record to facilitate this?
We have a lot of unused domains that we'd like to setup domain parking for.
To keep it simple, we'd like to just change the namesevers to ns1.domainparking.com and ns2.domainparking.com (not real nameservers!) and the domains would then automatically show a simple web page.
We use cpanel servers and are wondering how easy this is to do? I've seem mention of wildcard dns? Is that the answer?
i have about 8 different domains i'd like to point to a nameserver (ns1./ns2.mydomain.com) on Win2k3 server, but i can't get them resolved through my nameserver without creating a manual forward lookup entry for each *parked* domain separatly..
Does anyone know how to resolve "parked" domains automatically on Win2k3 DNS??
I just can't find any answer for this, everything i've found required manual creation of lookup entries..
But do i need to speak to the datacenter to add the reverse dns entries for my domain on their nameservers? What about if i host my nameservers offsite, but then have my webserver/mailserver etc inside the datacenter? Would i need to request the datacenter where the nameservers are hosted to add the reverse ip entries for the domain, and then the request the same from the datacenter for my web/mail servers to add the reverse entries?
I've been having some DNS problems with one of my domains for quite some time now. The domain does not always resolve - some go days without being able to access the site.
I ran a simple BASH script to show what I mean. I replaced my domain with "mysite.net" and the IP with "xx.xx.xxx.xxx".
# for i in `seq 1 15`; do host mysite.net; done
mysite.net has address xx.xx.xxx.xxx mysite.net mail is handled by 0 mysite.net. Host mysite.net not found: 2(SERVFAIL) mysite.net has address xx.xx.xxx.xxx Host mysite.net not found: 2(SERVFAIL) mysite.net has address xx.xx.xxx.xxx Host mysite.net not found: 2(SERVFAIL) mysite.net has address xx.xx.xxx.xxx Host mysite.net not found: 2(SERVFAIL) mysite.net mail is handled by 0 mysite.net. mysite.net has address xx.xx.xxx.xxx Host mysite.net not found: 2(SERVFAIL) Host mysite.net not found: 2(SERVFAIL) mysite.net has address xx.xx.xxx.xxx Host mysite.net not found: 2(SERVFAIL) mysite.net mail is handled by 0 mysite.net. mysite.net has address xx.xx.xxx.xxx mysite.net mail is handled by 0 mysite.net. mysite.net has address xx.xx.xxx.xxx mysite.net mail is handled by 0 mysite.net. mysite.net has address xx.xx.xxx.xxx mysite.net mail is handled by 0 mysite.net. mysite.net has address xx.xx.xxx.xxx Host mysite.net not found: 2(SERVFAIL) mysite.net has address xx.xx.xxx.xxx mysite.net mail is handled by 0 mysite.net. mysite.net has address xx.xx.xxx.xxx mysite.net mail is handled by 0 mysite.net. mysite.net has address xx.xx.xxx.xxx mysite.net mail is handled by 0 mysite.net. mysite.net has address xx.xx.xxx.xxx mysite.net mail is handled by 0 mysite.net.
Has anyone experienced a similar problem? I have gone over the DNS records countless times and see no problems. The site is hosted on my own dedicated server.
Okay guys, a quick question for all the gurus out there. I'll admit I'm a bit embarassed posting such an easy question, but give a guy a break, I've been using managed servers for god knows how long and I've finally decided to take a dive into administration. Everything is firewalled and secured properly, I'm just having trouble getting the ServerAlias to work right.
What happens is I go into my browser and enter in [url]walaa! It works.
Now, when I enter in [url], it does not resolve.
I have checked with "dig" the domain settings and it looks as though all of the nameservers are set up fine, this is an apache problem. I'm running apache 2.2 on Ubuntu 7.10 for all those who are interested.
Here is my etc/apache2/sites-available/domain.com:
<VirtualHost *:80>
# Admin email, Server Name (domain name) and any aliases ServerAdmin webmaster@domain1.com ServerName domain.com ServerAlias www.domain.com
# Index file and Document Root (where the public files are located) DirectoryIndex index.html DocumentRoot /home/demo/public_html/domain.com/public
I just when found this domain on google when I was make some search of content of my site I found domain as a parked domain and work for my site!
so I go to cpanel and parked domain but not found any thing
so what this mean how someone have parked domain for my site and when i go to cpanel noting foudn also when I go to whm and accoubt listed I don’t find that domain?
I´ve a domain but haven´t set the DNS servers yet....now I get a free hosting and I wanted to associate the DNS servers to my domain but I don´t know how!!!
It would be great If you could help me...and let me know if you need more info..
However I am at the same time retaining the old.domain to keep the older links working
I want that the old.domain/link redirect to new.domain/link
Please advice what would be best to do for the old.domain -
1) Domain forwarding 2) Domain parking
or Both the above
(The other thing is that I would like to do 301 redirect - would this happen automatically by activating the above options - or something else has to be done)
delving into a new server, a dual opteron w/Centos. Got two questions as I think about setup.
1) 32 bit or 64bit?
2) Regarding host names and server assignemt...I can either assign it as a node to a domain hosted elsewhere in a reseller account, or I can start with a completely unused domain which is currently parked.
Any preference, in an ideal world?
(I have absolutely no preference, but it occurrred to me it may or may not be of consequence, perfomance & IT-wise and generally speaking .. all things being equal, of course.)
Like I said, a newbie. So I'm braced for the if-you-have-to-ask, you-shouldn't-be-in-one" musings for these rather basic boneheaders.
For some reason, for one of my sites, www.domain.com resolves correctly -- however, domain.com resolves to the Cpanel default page.
I've set up this domain the same way I set up my others. Also, I checked the DNS entry and see nothing wrong w/ it. Here's a screenshot of my DNS domain zone file: [url]
One of my websites, romeo-help4u.com has this problem. When i type and the address goes to [url]it works fine. But when I go to [url]it doesn't work.
Quote:
Great Success ! Apache is working on your cPanel® and WHM™ Server
If you can see this page, then the people who manage this server have installed cPanel and WebHost Manager (WHM) which use the Apache Web server software and the Apache Interface to OpenSSL (mod_ssl) successfully. They now have to add content to this directory and replace this placeholder page, or else point the server at their real content.
ATTENTION! If you are seeing this page instead of the site you expected, please contact the administrator of the site involved. (Try sending an email to <webmaster@domain>.) Although this site is running cPanel, WebHost Manager, and Apache software it almost certainly has no other connection to cPanel Inc. or the Apache Group. Please do not send mail about this site or its contents to cPanel Inc. or the Apache Group.
About cPanel: cPanel is a leading provider of software for the webhosting industry. If you would like to learn more about cPanel please visit our website at www.cpanel.net. Please be advised that cPanel Inc. is not a web hosting company, and as such has no control over content found elsewhere on this site.
About Apache HTTP Server: The Apache HTTP Server is an open source web server which powers many of the worlds web sites. The Apache HTTP server is part of the Apache Group's many influential projects. Their efforts have helped shape much the world wide web, and they continue to be a dominating force in the web hosting industry.
I checked the dns through whm and everything looks normal. What did I set up wrong?
I ve been having a problem with the "www" prefix for the domains
For example: [url]
works ok
But
[url]
Does not resolve
here is the named conf
; Modified by Web Host Manager ; Zone File for hayalikelimeler.net $TTL 14400 @ 86400 IN SOA ns1.theplanet.com. fikret.eforelektrik.com. ( 2007032306 14400 7200 3600000 14400 )
hayalikelimeler.net. 14400 IN NS ns1.theplanet.com. hayalikelimeler.net. 14400 IN NS ns2.theplanet.com.
hayalikelimeler.net. 14400 IN A 74.52.228.130
localhost.hayalikelimeler.net. 14400 IN A 127.0.0.1
hayalikelimeler.net. 14400 IN MX 0 hayalikelimeler.net.
mail 14400 IN CNAME hayalikelimeler.net. www 14400 IN CNAME hayalikelimeler.net. ftp 14400 IN A 74.52.228.130
