Pptp Support On Windows VPS
Oct 11, 2009We have one windows VPS installed on hypervm.
Now client want to enable pptp or VPN on windows VPS?
Is it possible? And if yes...how to enable it?
We have one windows VPS installed on hypervm.
Now client want to enable pptp or VPN on windows VPS?
Is it possible? And if yes...how to enable it?
Just wondering if anyone has come across this problem before.
My environment:
Xen VPS
128MB RAM
CentOS 4.5
I have install PPTP, and controlling via webmin. The server starts up fine, I have added a user account.
Here is the messages log after starting up PPTP:
Code:
Mar 5 15:00:56 uk2 pptpd[3562]: MGR: connections limit (100) reached, extra IP addresses ignored
Mar 5 15:00:56 uk2 pptpd[3563]: MGR: Manager process started
Mar 5 15:00:56 uk2 pptpd[3563]: MGR: Maximum of 100 connections available
Here is the messages log when trying to connect from a MS WINDOWS XP client: ....
I have a customer who created a subdomain and wants to redirect it to an address with pptp protocol. It doesn't seem to be working. When pointing to the subdomain, it will actually point to the designated destination IP, but it shows http instead of pptp. Am I assuming correctly that this is because you can't point to a pptp protocol in a browser?
View 5 Replies View RelatedI have buy a VPS from swvps ($10) with 300 MB Guarantee memory and 600 MB Burstable and 150GB B/W....
but that provider can not allow dev/ppp or dev/XXX ... only can allow TUN/TAP for OpenVPN...
I need a cheap vps for install PPTP VPN on it....
I'm trying to establish a VPN server inside a Fedora 10 VPS under OpenVZ. Openswan or Poptop is preferred over OpenVPN because Windows has built-in support for these protocols.
It looks like the host node (it's actually the vps from myprohost.com) doesn't have the required kernel modules enabled(installed?). Take Poptop for example, if I run pppd after rpm installation, the output is like this:
[root@v ~]# /usr/sbin/pppd
/usr/sbin/pppd: This system lacks kernel support for PPP. This could be because
the PPP kernel module could not be loaded, or because PPP was not
included in the kernel configuration. If PPP was included as a
module, try `/sbin/modprobe -v ppp'. If that fails, check that
ppp.o exists in /lib/modules/`uname -r`/net.
See README.linux file in the ppp distribution for more details.
[root@v ~]# modprobe -v ppp
FATAL: Could not load /lib/modules/2.6.18-92.1.18.el5.028stab060.2/modules.dep: No such file or directory
And when I check for the availability of the encryption module "MPPE", I got the same result:
[root@v ~]# modprobe mppe
FATAL: Could not load /lib/modules/2.6.18-92.1.18.el5.028stab060.2/modules.dep: No such file or directory
Openswan complains about some missing kernel modules too. So what do I do? Do I tell the provider to enable these modules? Do they normally do that? Will the host node require a reboot after having done that?
What modules are required for Poptop and Openswan? And, do I need to tell them to re-enable these modules every time I rebuild my OS?
Looking for Windows reseller hosting to host a few domains. Need the provider to support the domains in my account. Don't want to take the headache of answering all my friends questions. Space 5-7GB, Transfer 40-60GB with EndUser support. Budget $35-50/month.
View 10 Replies View RelatedIs there a good windows server support company? There seem to be plenty for linux and Cpanel but not for windows. We are looking to do a per issue or per ticket support plan as we have multiple servers. We would also like someone that knows windows VPS - virtuozzo.
View 0 Replies View Relatedcan any body reffer me some reliable windows resellers providing aspsmartupload component support.
i have checked easycgi. i dont like their features and packages.
recommend me about a good hosting provider for those requirements: Windows IIS hosting, support for .NET 2.0, MS SQL 2005 Database & ISAPI_Rewrite?
View 4 Replies View Relatedwhich windows share hosting support apache php mysql?
View 7 Replies View RelatedThe scenario is like this I have Plesk + IIS + windows server and I want to store Plesk backups to a partition in linux server. So I have created a samba share and mounted it under the windows server. the issue showing is it is not possible to write to samba shared partition.
View 2 Replies View RelatedI'm migrating from Plesk 9.5 to 11 and I'm getting the following on my Transfer Pre-Check from within the Migration Manager."The destination DNS server does not support networks in the Transfer Restrictions Template, but some subscriptions have networks in DNS transfer restrictions. The records with network IP addresses in the DNS transfer restrictions will not be restored."
I've gone to Server, DNS Settings, Transfer Restriction Template and added the new server's IP to the list of allowed networks to no avail. I also couldn't find any documentation on what the cause might be.
Has anybody heard of Flash Support and Real AudioVideo Support? MMHosting.com offers this kind of support and I wonder if it's effective?
What do you think of it?
I'm undecided between an upcoming dedicated hosting server and am moving between Softlayer and ThePlanet. My decision partly comes down to support.
I've read many reviews on WHT about both companies, but not necessarily comparing them from people who have experienced both.
So my questions (keep in mind this is my first dedicated. I have used VPS in the past with good support) Which offers MORE support (not better) - I'm curious which company might consider my support questions as "part of the default service package" or "need additional service plan for that" More detailed support - my usual experience with support is support staff assume you already know a high level so it may take going forward and back 5 times via email to get a full answer
Overall support satisfaction - any other comments
I've been with Hivelocity for 2 years. Occasionally we have problems, but it works. Their support staff can do very simple things relatively fast, however if you have some serious problems, e.g. failed disk and need to be replaced and do restoration from backup, it will be hell!
They will NOT do what asked in Reload Request, delayed answer to chat, no answer to tickets for many hours.
So far I'm very disappointed of Hivelocity support.
I was actually curious about this since Windows 2008 version came out.
What is the difference between Windows media services on Windows 2003 and Windows 2008?
Do you know any vps that support vpn ?
View 0 Replies View RelatedHow much support should I expect/look for?
If I were to purchase a VPS without cPanel ( or any other panel), what kind supports should I expect from my host?
how common is it in the VPS industry to do custom installs/configurations/updates on request. For example, I don't know how to configure qmail and I will want someone to do this for me. Does this kind of service exist? Is it a standard to be expected or is it fee-based thing?
View 9 Replies View RelatedEverytime I go to hostgators live support my firefox crashes.
This usually happens before I initiate the chat or after.
Does anyone else have this problem?
How many % of hosts have Zip support in PHP?
If you (the replyer) are a web host, tell me if you are supporting. (yes/no)
IMAP Support
Im used DirectAdmin on my primary linux server, i need to IMAP support in php.ini for resolve my ticket import system in "WHMCS" But i dont know how can enable it on DirectAdmin.
Can you help me?
__________________
Need More Power?!PersianWhois.Com
Do you personaly think that some companys don't answer right on support tickets or don't think the right way, (like dont care) when answering a support ticket in there billing system or support system then with the client comes on a forum such as WHT and posts what happens the provider comes and helps the client much more then he would of or had in the support tickets. I see many people come on wht and bring there problems they have with there provide, Im not saying this is a bad thing to do im just trying to show every else how i see it as that the hosts don;t care about there clients but when something goes public the hosting provider trys more to fix it...
Could it be that he or she dsnt want to lose customers thats the way i think it.
GeekStorage's support is awesome. They usually answer within 10 minutes and so far (only been with them for 2 weeks!) they have solved every issue perfectly.
The quality of their support and their attention to detail is the best I have seen in the past 5 years.
I've got give LW some props.
I was at a crossroads on my server running php 4x and needed to be able to run 5 and allow the sites using 4 to still run it. I read about how to do it but would of totally screwed it up.
LW support came to the rescue, installed both the 4 and 5 and now I can select the php version to run from the accounts cpanel.
Took a while to work through it but it's up and running and I'm a happy camper.
That's why I've had my server with them going on 3 years now.
I want to buy a hosting service with following feature
1 SSH
2 SSL
3 Rsync
4 SVN
5 Wordpress, Drupal support ( plan to run multiple wordpress and drupal site in this hosting plan)
6 multiple domain name support in one hosting plan
7 a lot of bandwith
8 great customer support, and low down time
I do some research and have a chat with justhost.com and they seem to support everything i need however, after reading some review seem like they try to force you to update to dedicate server when your bandwidth is up.
We are a web company that currently has a WHM/cPanel server that we manage ourselves. However, we are looking for a service that will be on call for us 24/7 in case something were to go amiss and our technical team was not available to restart services, restart the server or do whatever technical troubleshooting was required to get things back up and running quickly.
View 2 Replies View RelatedFantastico applications are offered almost everywhere, but so far I've only found one web host that dares to provide Fantastico support.
Can anyone here recommend any web hosts that do provide support for the 3rd party applications available through Fantastico's installer?
I am looking for a webhost with a package that supports both ASP.NET *and* Postgres. So far, I have been able to find ones that support one but not the other.
View 8 Replies View RelatedI'm in the process of migrating some stuff to a new VPS. Some things I can do myself, some the provider has offered to help with (Future Host), but there are a number of little issues and tasks that I either don't have the time for, or aren't confident in doing myself.
I'd like to 'hire' a freelancer. Can anyone give me an idea what a going rate for doing some general WHM/cPanel tasks might be?
I moved a web site over to iweb.com about 4 months ago. I've found them to be quite responsive to simply queries and issues - quite a change from the previous host I might say. Last week I ran an FTP download to perform a backup of all the material. After about 12Mb, the transfer was aborted and I could no longer access the site by FTP, or HTTP and I couldnt get email. The site is not down though as others can access it, but I cannot access it from any computers on my network (PC and mac). I chatted with support and they said they'd have to look into it - this was last Wed (1/14). I still cannot get connected. Further diagnosis from my end leads me to believe that IP was blocked due to the FTP transfer (I was able to duplicate this from a different IP). Apparently, the problem has been escalated to the sysadms but they are swamped and can't get to my problem. I figure unblocking the IP should be an easy quick fix. Perhaps understanding why it happened and how to rectify that will take longer.
My question to the group is, is this level of service normal for iweb.com, and are my expectations of a quick fix unreasonable?