Phpize Error :: Cannot Find Config.m4
Jul 17, 2008phpize
Cannot find config.m4.
Make sure that you run '/usr/bin/phpize' in the top level source directory of the module
ADVERTISEMENT
Eaccelerator Installation Error, Can Not Find Config.m4
Aug 11, 2008when I enter:
export PHP_PREFIX="/opt/php"
$PHP_PREFIX/bin/phpize
I got the following error message when I@user:
Cannot find config.m4.
Make sure that you run '/opt/php/bin/phpize' in the top level source directory of the module
I checked the above said folder (/opt/php/), there is no file called config.m4. but I found it at php source folder. what should I do to continue?
CentOs(Yum) Error :: Error: Cannot Find A Valid Baseurl For Repo: Update
May 17, 2009yum -y groupinstall kde
Loading "priorities" plugin
Setting up Group Process
Setting up repositories
Cannot find a valid baseurl for repo: update
Error: Cannot find a valid baseurl for repo: update
what is this? what ever i try to install i get this weird error..
Error While Creating New Apache Config File
Jan 26, 2015I got this message now for the second time:
Template processing failed: file = /usr/local/psa/admin/conf/templates/default/domainWebmail.php, error = Template_Exception: No data. file: /usr/local/psa/admin/plib/Template/Processor.php line: 28 code: 0 Previous error: Template_Variable_Exception: No data. file: /usr/local/psa/admin/plib/Template/Variable/AbstractCachedData.php line: 67 code: 0.
How can this happen and how to solve this?
Phpize: Command Not Found
Jul 21, 2007On compiling apache module on Debian, i get error
phpize: command not found
I am new to debian, not sure how to install php-devel on debian.
The server have Plesk installed.
Quote:
# php -v
PHP 4.3.10-22 (cli) (built: Jun 30 2007 14:42:16)
Copyright (c) 1997-2004 The PHP Group
Zend Engine v1.3.0, Copyright (c) 1998-2004 Zend Technologies
#
How do i install php-devel on the server?
Also let me know what is the command to list installed software on debian like "yum list" on RH.
FFmpeg-Php Phpize Install Issue
Apr 27, 2007I'm trying to install ffmpeg-php on fedora c4
When trying to phpize i get this error:
Configuring for:
PHP Api Version: 20031224
Zend Module Api No: 20041030
Zend Extension Api No: 220040412
/usr/bin/phpize: line 105: aclocal: command not found
I found a similar thread and tried their solution (yum install automake)
Downloading Packages:
warning: rpmts_HdrFromFdno: Header V3 DSA signature: NOKEY, key ID db42a60e
Public key for autoconf-2.59-5.noarch.rpm is not installed
Retrieving GPG key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora
GPG key at file:///etc/pki/rpm-gpg/RPM-GPG-KEY-fedora (0x4F2A6FD2) is already installed
The GPG keys listed for the "Fedora Core 4 - i386 - Base" repository are already installed but they are not correct for this package.
Check that the correct key URLs are configured for this repository.
.. I'm pretty new to linux and have no idea whats going on/how I can resolve it - does anyone have any suggestions? If theres any more info I should post that would help let me know.
Squirremail :: Error Opening Timezone Config, Contact Administrator
Jun 22, 2008When a user login in my squirremail webmail and try to click on Options > Personal Information they get this message:
ERROR:
Error opening timezone config, contact administrator.
The version of my squiremail is 1.4.9
PHP + OpenSSL, Error Unable To Find The Socket Transport SSL
Jun 20, 2009We're having problems with the Roundcube webmail spell check, and upon checking the log we get the error 'Unable to find the socket transport SSL'. From what I can find out this is normally due to Open SSL not being enabled, but it is, you can check our php config here.
View 3 Replies View RelatedPlesk 12.x / Linux :: Migration Error - Unable To Find Domain
Nov 18, 2014When you perform a migration, Plesk gives me this error. For more I search, I find what may be the cause.
Error: Unable to find domain with name 'e-domain.com'[2014-11-18 19:41:31] ERR [panel] exception 'PleskObjectNotFoundException' with message 'Unable to find domain with name 'e-domain.com'' in /usr/local/psa/admin/plib/Domain.php:950
Stack trace:
#0 /usr/local/psa/admin/plib/backup/Conflicts/PleskDataManager.php(1278): Domain::getByName('e-domain.c...')
#1 /usr/local/psa/admin/plib/backup/Conflicts/Resolver/UnfitSettingsResolver.php(500):
[Code] .....
Horde Error: Warning: Failed Opening '/usr/local/cpanel/base/horde/config/horde.php'
Aug 16, 2008Horde error: Warning: Failed opening '/usr/local/cpanel/base/horde/config/horde.php' for inclusion
I am getting the above given error message.
Using Find Command With Regex To Find All Number-only Filenames
Oct 15, 2007how can i do a search for all files (probs using regex) of files consisting purely of numbers?
for e.g. find:
53243.php
24353.php
24098.php
(always have 5 numbers).
seems one of my accounts has had some script run which generated a bunch of these in various subfolders, and the php file basically does a callback to www3.rssnews.ws and www3.xmldata.info, which seem to be some sort of spyware servers.
Plesk 12.x / Linux :: Internal Error - Unable To Find Service Node For Web Service On Domain With ID 5
Jun 15, 2014Clean install on openSUSE 13.1
After deleting a domain, we got the following error which rendered the panel useless.
Internal error: Unable to find service node for web service on domain with id=5
Message Unable to find service node for web service on domain with id=5
File PhDomain.php
Line 1402
Type PleskDBException
Go To Previous Page
Error Backup, Transfer To New Server "Unable To Find The Cpanel User File."
Jul 11, 2007I have problem:
Searching /root....
Found cpmove-clanpz.tar.gz!
Moving Packge to /root/cprestore/cpmove-clanpz.tar.gz
Extracting tarball....window.scroll(0,175);...............
Done
Extracting Domain....Done
Sorry, the copy failed. Unable to find the cpanel user file. Is the archive missing (cwd: /root/cprestore loaded cpmove-clanpz/cp/clanpz)?
checked 4 files.....
1. /scripts/pkgacct username...
2. Transfer backup to new server
3. /scripts/restorepkg username
4. this error
Plesk 11.x / Linux :: 11.5.30 Repository Error - Transport Error - Unable To List Directory - Curl Error
Jun 29, 2013After upgrade to Plesk 11.5.30 trying to set up FTP-Backup Repository:
Repository error: Transport error: unable to list directory: Curl error: Access denied to remote resourceClick to expand...
Best Config For My.cnf
May 5, 2009Server :
Code:
Intel C2Q Q9450
8196 MB DDR2 RAM
500 GB 7.200RPM
2000GB Transfer p/m
OS: CentOS 5.2
Code:
running a ipb forum site 2.3.4
current stats :
Our members have made a total of 245,827 posts
We have 14,673 registered members
Total number of topics is 75099
with atleast 150 members online + 200guests.
what would be the perfect my.cnf config for this kinda of a server? Im running litespeed.
Cannot Run /bin/sh ./config.sub
Jan 3, 2008I am trying to install a newer release of APC PHP cache on our server that runs RHES-4 and PHP 4.3.9
I installed version 3.0.14 some time ago and now cannot install the new v3.0.16. When I run ./configure I get this:
Quote:
[root@xxxx APC-3.0.16]# ./configure --enable-apc --enable-apc-mmap --with-apxs --with-php-config
configure: error: cannot run /bin/sh ./config.sub
The baffling thing is that I also cannot now reinstall 3.0.14 as it shows the same error.
I also get this error if I try to install XCache.
Awstats Config
Jun 4, 2009I have tried to manually setup awstats on a website in Windows 2008 with IIS 7. The problem here is that I have to create two conf files for each website, one named awstats.sitename.conf and the other awstats.www.sitename.conf. If I don't do so, then awstats does not work on either www.sitename.com or sitename.com. I cannot update the stats or view it from the browser. I have a few Hosting controller servers in which awstats is used and I compared the conf file with them and there is no difference. I wonder what could be the issue.
View 1 Replies View RelatedBackup Config
Oct 30, 2008i have a dedicated server without any daily, weekly, monthly backup.
please help me (Step by Step)to setup configuration my server to take backup every day within (some account) at (3 AM).
i mean setting for every day about some account (A,B,C...Z) at the 3 AM
How To Config My Domain
Mar 27, 2008I have a domain, ex: hangnguyen.com at godaddy, I changed nameserver to ns1.everydns.net, ns2.everydns.net, ns3.everydns.net .
Now I order a shared hosting at bluehost, I should change nameserver to ns1.bluehost.com, ns2.bluehost.com to make it works .
But I want keep the nameserver ns1.everydns.net ....
So how I config my domain in everydns control panel to let my domain work on bluehost?
BIND9 Config
Jan 20, 2008Switching from Windows DNS to bind DNS. Slightly different as I have to learn the commands instead of using the GUI. Can you tell me if the below config is correct to run mydomain.net so people can access it from the web? It will also be acting as its own name servers. This is purely for external DNS. The private IPs will be changed to routable ones once its in the DC.
Have I missed anything or is that good enough for deployment to the live environment?
I have this in /etc/bind/zones/mydomain.net.db
; mydomain.net
$TTL 604800
@ IN SOA ns0.mydomain.net. admin.mydomain.net. (
2008012001 ; Serial
604800 ; Refresh
86400 ; Retry
2419200 ; Expire
604800); Negative Cache TTL
; nameservers
mydomain.net IN NS ns0.mydomain.net
mydomain.net IN NS ns1.mydomain.net
ns0 IN A 192.168.1.15
ns1 IN A 192.168.1.16
;mail
mail IN MX 10 mail
mail IN A 192.168.1.17
; web
IN A 192.168.1.17
www IN A 192.168.1.17
And in /etc/bind I have this in my named.conf.local file
# This is the zone definition for // mydomain.net //
zone "mydomain.net" {
type master;
file "/etc/bind/zones/mydomain.net.db";
};
How To Use/config NAMESERVERS
Oct 23, 2008I have had many dedicated servers in the past but other people managed to configure them up.
I basicly want to host somedomain.com and somedomain2.com on a windows server that is located on XX.XXX.XXX.XX
The server has apache and php installed, which is just what I need. I am having an hard time configuring the domains I want to use on the server in order to make em "work" on the server.
MRTG Config
Feb 20, 2007I've installed MRTG, but am having problems making the config file, all I want to do is monitor the in/out bandwidth (2 graphs) on my own server, has anyone got an example file they could paste here?
View 3 Replies View RelatedHow To Config PhpMyAdmin
Aug 23, 2007I am a newbie and now i am running a VPS account. I have some questions want to ask you
Where is the locate of phpMyAdmin?
I am running VPS server but get error when access to phpmyadmin.
Quote:
Wrong username/password. Access denied.
I created a user=root and passworld=xxx in my WHM.
How to find config.inc.php ?
- locate but error
Quote:
warning: locate: could not open database: /var/lib/slocate/slocate.db: No such file or directory
warning: You need to run the 'updatedb' command (as root) to create the database.
Please have a look at /etc/updatedb.conf to enable the daily cron job.
Config For MYSQL3.23
Jan 11, 2007Does someone know a basic or well config for mysql 3.23. I dont need something fancy just something that isn't what i have now (defaults).
Here is my current config. It sucks right? I have mainly forum websites and its alreaydu eating all RAM.
safe-show-database
innodb_data_file_path=ibdata1:10M:autoextend
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
set-variable=max_connections=300
set-variable=max_user_connections=10
set-variable=max_allowed_packet=1M
set-variable=thread_stack=128K
set-variable=key_buffer=128M
set-variable=table_cache=300
set-variable=record_buffer=8M
set-variable=back_log=100
set-variable=thread_cache_size=4
set-variable=sort_buffer=16M
set-variable=delayed_insert_timeout=150
set-variable=interactive_timeout=40
set-variable=wait_timeout=40
set-variable=connect_timeout=10
[mysql.server]
user=mysql
basedir=/var/lib
[safe_mysqld]
err-log=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid
Redundant Config
Mar 18, 2007I've decided to move from managed hosting to colocated hosting and I'm in a bit over my head as far designing the server configuration goes. I'm looking for assistance with setting up a fully redundant configuration with no SPOF (single point of failure).
The colo provider ensures full redundancy to the cabinet, terminating with two network drops from diverse bandwidth providers and HSRP. I need to eliminate all SPOFs inside the cabinet.
Some questions...
1) I'm thinking of using the Cisco 2960 Series switch as the in-cabinet distribution switch. I believe it supports HSRP. From my understanding, the switch will automatically failover from one uplink to the other in case of a network problem on one of the uplinks, and this will all be transparent to any servers connected to the switch. Is this correct?
2) However, this introduces the switch as SPOF. So, I believe what I need to do is ask the colo for a second pair of network drops and deploy a pair of 2960's. Then I would connect each server to both switches via separate NICs. Is this correct?
3) Finally, assuming I am on the right track here, I would like this to all be transparent and automatic with no human intervention required to recover from a switch failure. The servers will be running RHEL 4. How would I configure the network interfaces on the servers so that they can transparently use either (or both) of the switches? Is there some way to assign the same IP address to more than one interface? How does the OS keep from getting confused about where to send the traffic?
Thanks in advance for any insight. I would also be happy to hear recommendations for excellent network consultants that I could hire to design and implement this configuration for me.
Config PhpMyAdmin
Aug 23, 2007I have a problem when i config config.inc.php file in my WHM . I don't know why share accounts can access to phpMyAdmin or create your database from cpanel .
This is a part of config.inc.php file
Quote:
/**
* Disable the default warning that is displayed on the DB Details Structure page if
* any of the required Tables for the relationfeatures could not be found
*/
$cfg['PmaNoRelation_DisableWarning'] = FALSE;
/**
* The 'cookie' auth_type uses blowfish algorithm to encrypt the password. If
* at least one server configuration uses 'cookie' auth_type, enter here a
* passphrase that will be used by blowfish. The maximum length seems to be 46
* characters.
*/
$cfg['blowfish_secret'] = '';
/**
* Server(s) configuration
*/
$i = 0;
// The $cfg['Servers'] array starts with $cfg['Servers'][1]. Do not use
// $cfg['Servers'][0]. You can disable a server config entry by setting host
// to ''. If you want more than one server, just copy following section
// (including $i incrementation) serveral times. There is no need to define
// full server array, just define values you need to change.
$i++;
$cfg['Servers'][$i]['host'] = 'localhost'; // MySQL hostname or IP address
$cfg['Servers'][$i]['port'] = ''; // MySQL port - leave blank for default port
$cfg['Servers'][$i]['socket'] = ''; // Path to the socket - leave blank for default socket
$cfg['Servers'][$i]['ssl'] = false; // Use SSL for connecting to MySQL server?
$cfg['Servers'][$i]['connect_type'] = 'tcp'; // How to connect to MySQL server ('tcp' or 'socket')
$cfg['Servers'][$i]['extension'] = 'mysql'; // The php MySQL extension to use ('mysql' or 'mysqli')
$cfg['Servers'][$i]['compress'] = FALSE; // Use compressed protocol for the MySQL connection
// (requires PHP >= 4.3.0)
$cfg['Servers'][$i]['controluser'] = ''; // MySQL control user settings
// (this user must have read-only
$cfg['Servers'][$i]['controlpass'] = ''; // access to the "mysql/user"
// and "mysql/db" tables).
// The controluser is also
// used for all relational
// features (pmadb)
$cfg['Servers'][$i]['auth_type'] = 'config'; // Authentication method (valid choices: config, http, HTTP, signon or cookie)
$cfg['Servers'][$i]['user'] = ''; // MySQL user
$cfg['Servers'][$i]['password'] = ''; // MySQL password (only needed
// with 'config' auth_type)
$cfg['Servers'][$i]['SignonSession'] = ''; // Session to use for 'signon' auth method
$cfg['Servers'][$i]['SignonURL'] = ''; // URL where to redirect user to login for 'signon' auth method
$cfg['Servers'][$i]['LogoutURL'] = ''; // URL where to redirect user after logout
$cfg['Servers'][$i]['nopassword'] = FALSE; // Whether to try to connect without password
$cfg['Servers'][$i]['only_db'] = ''; // If set to a db-name, only
// this db is displayed in left frame
// It may also be an array of db-names, where sorting order is relevant.
$cfg['Servers'][$i]['hide_db'] = ''; // Database name to be hidden from listings
$cfg['Servers'][$i]['verbose'] = ''; // Verbose name for this host - leave blank to show the hostname
$cfg['Servers'][$i]['pmadb'] = ''; // Database used for Relation, Bookmark and PDF Features
// (see scripts/create_tables.sql)
// - leave blank for no support
// DEFAULT: 'phpmyadmin'
$cfg['Servers'][$i]['bookmarktable'] = ''; // Bookmark table
// - leave blank for no bookmark support
// DEFAULT: 'pma_bookmark'
$cfg['Servers'][$i]['relation'] = ''; // table to describe the relation between links (see doc)
// - leave blank for no relation-links support
// DEFAULT: 'pma_relation'
$cfg['Servers'][$i]['table_info'] = ''; // table to describe the display fields
// - leave blank for no display fields support
// DEFAULT: 'pma_table_info'
$cfg['Servers'][$i]['table_coords'] = ''; // table to describe the tables position for the PDF schema
// - leave blank for no PDF schema support
// DEFAULT: 'pma_table_coords'
$cfg['Servers'][$i]['pdf_pages'] = ''; // table to describe pages of relationpdf
// - leave blank if you don't want to use this
// DEFAULT: 'pma_pdf_pages'
$cfg['Servers'][$i]['column_info'] = ''; // table to store column information
// - leave blank for no column comments/mime types
// DEFAULT: 'pma_column_info'
$cfg['Servers'][$i]['history'] = ''; // table to store SQL history
// - leave blank for no SQL query history
// DEFAULT: 'pma_history'
$cfg['Servers'][$i]['designer_coords'] = ''; // table to store the coordinates for Designer
// - leave blank for no Designer feature
// DEFAULT: 'pma_designer_coords'
$cfg['Servers'][$i]['verbose_check'] = TRUE; // set to FALSE if you know that your pma_* tables
// are up to date. This prevents compatibility
// checks and thereby increases performance.
$cfg['Servers'][$i]['AllowRoot'] = TRUE; // whether to allow root login
$cfg['Servers'][$i]['AllowDeny']['order'] // Host authentication order, leave blank to not use
= '';
$cfg['Servers'][$i]['AllowDeny']['rules'] // Host authentication rules, leave blank for defaults
= array();
// If you have more than one server configured, you can set $cfg['ServerDefault']
// to any one of them to autoconnect to that server when phpMyAdmin is started,
// or set it to 0 to be given a list of servers without logging in
// If you have only one server configured, $cfg['ServerDefault'] *MUST* be
// set to that server.
$cfg['ServerDefault'] = 1; // Default server (0 = no default server)
/**
* Other core phpMyAdmin settings
*/
$cfg['MaxDbList'] = 100; // maximum number of db's displayed in left frame and databaes list
$cfg['OBGzip'] = 'auto'; // use GZIP output buffering if possible (TRUE|FALSE|'auto')
$cfg['PersistentConnections'] = FALSE; // use persistent connections to MySQL database
$cfg['ForceSSL'] = FALSE; // whether to force using https
$cfg['ExecTimeLimit'] = 300; // maximum execution time in seconds (0 for no limit)
$cfg['MemoryLimit'] = 0; // maximum allocated bytes (0 for no limit)
$cfg['SkipLockedTables'] = FALSE; // mark used tables, make possible to show
// locked tables (since MySQL 3.23.30)
$cfg['ShowSQL'] = TRUE; // show SQL queries as run
$cfg['AllowUserDropDatabase'] = FALSE; // show a 'Drop database' link to normal users
$cfg['Confirm'] = TRUE; // confirm 'DROP TABLE' & 'DROP DATABASE'
$cfg['LoginCookieRecall'] = TRUE; // recall previous login in cookie auth. mode or not
$cfg['LoginCookieValidity'] = 1800; // validity of cookie login (in seconds)
$cfg['LoginCookieStore'] = 0; // how long login cookie should be stored (in seconds)
$cfg['LoginCookieDeleteAll'] = TRUE; // whether to delete all login cookies on logout
$cfg['UseDbSearch'] = TRUE; // whether to enable the "database search" feature
// or not
$cfg['IgnoreMultiSubmitErrors'] = FALSE; // if set to true, PMA continues computing multiple-statement queries
// even if one of the queries failed
$cfg['VerboseMultiSubmit'] = TRUE; // if set to true, PMA will show the affected rows of EACH statement on
// multiple-statement queries. See the libraries/import.php file for
// hardcoded defaults on how many queries a statement may contain!
$cfg['AllowArbitraryServer'] = FALSE; // allow login to any user entered server in cookie based auth
// Left frame setup
$cfg['LeftFrameLight'] = TRUE; // use a select-based menu and display only the
// current tables in the left frame.
$cfg['LeftFrameDBTree'] = TRUE; // turn the select-based light menu into a tree
$cfg['LeftFrameDBSeparator'] = '_'; // the separator to sub-tree the select-based light menu tree
$cfg['LeftFrameTableSeparator']= '__'; // Which string will be used to generate table prefixes
// to split/nest tables into multiple categories
$cfg['LeftFrameTableLevel'] = '1'; // How many sublevels should be displayed when splitting
// up tables by the above Separator
$cfg['ShowTooltip'] = TRUE; // display table comment as tooltip in left frame
$cfg['ShowTooltipAliasDB'] = FALSE; // if ShowToolTip is enabled, this defines that table/db comments
$cfg['ShowTooltipAliasTB'] = FALSE; // are shown (in the left menu and db_structure) instead of
// table/db names. Setting ShowTooltipAliasTB to 'nested' will only
// use the Aliases for nested descriptors, not the table itself.
$cfg['LeftDisplayLogo'] = TRUE; // display logo at top of left frame
$cfg['LeftLogoLink'] = 'main.php'; // where should logo link point to
// (can also contain an external URL)
$cfg['LeftLogoLinkWindow'] = 'main'; // whether to open the linked page
// in the main window ('main')
// or in a new window ('new')
$cfg['LeftDisplayServers'] = FALSE; // display server choice at top of left frame
$cfg['DisplayServersList'] = FALSE; // server choice as links
$cfg['DisplayDatabasesList'] = FALSE; // database choice in light as links
// In the main frame, at startup...
$cfg['ShowStats'] = TRUE; // allow to display statistics and space usage in
// the pages about database details and table
// properties
$cfg['ShowPhpInfo'] = FALSE; // show php info link
$cfg['ShowServerInfo'] = TRUE; // show MySQL server information
$cfg['ShowChgPassword'] = FALSE; // show change password link
$cfg['ShowCreateDb'] = TRUE; // show create database form
$cfg['SuggestDBName'] = TRUE; // suggest a new DB name if possible (false = keep empty)
Some questions
--------------------------------------------------
$cfg['Servers'][$i]['controluser'] =?
$cfg['Servers'][$i]['controlpass'] =?
--------------------------------------------------
$cfg['Servers'][$i]['user'] =?
$cfg['Servers'][$i]['password'] =?
Postfix Config
Jan 25, 2007I'm having some SMTP server security issues. I am running Postfix on my Debian VPS and I am trying to disable Postfix from being publically used by anybody except those with webmail.
I read Postfix's configuration at Postfix.org, but I couldn't find anything that I thought to be relevent to this situation. Do any of you have suggestions or ways to fix this? Besides disabling e-mail all together?
As another detail, I'm running Postfix on its original config, not through a MySQL database config.