when I enter:
export PHP_PREFIX="/opt/php"
$PHP_PREFIX/bin/phpize
I got the following error message when I@user:
Cannot find config.m4.
Make sure that you run '/opt/php/bin/phpize' in the top level source directory of the module
I checked the above said folder (/opt/php/), there is no file called config.m4. but I found it at php source folder. what should I do to continue?
phpize
Cannot find config.m4.
Make sure that you run '/usr/bin/phpize' in the top level source directory of the module
When trying to run rkhunter manually I get the error:
"Installation directory does not exist: /opt/psa"
I haven't changed the install directory setting in the rkhunter config file.
Looking for "default" rkhunter config file?
Or tell me a way to reset / reinstall rkhunter?
Everything was working fine until I upgraded from PHP 5.2.0 to PHP 5.2.1. I compiled from source to upgrade, and I installed PHP 5.2.0 from source. Once I upgraded, eAccelerator complained that I had to recompile it again for it to work on 5.2.1. I did and it gave me the same error. I recompiled maybe 10 times and it has still complained about it. How do I fix this error?
View 2 Replies View Relatedyum -y groupinstall kde
Loading "priorities" plugin
Setting up Group Process
Setting up repositories
Cannot find a valid baseurl for repo: update
Error: Cannot find a valid baseurl for repo: update
what is this? what ever i try to install i get this weird error..
I got this message now for the second time:
Template processing failed: file = /usr/local/psa/admin/conf/templates/default/domainWebmail.php, error = Template_Exception: No data. file: /usr/local/psa/admin/plib/Template/Processor.php line: 28 code: 0 Previous error: Template_Variable_Exception: No data. file: /usr/local/psa/admin/plib/Template/Variable/AbstractCachedData.php line: 67 code: 0.
How can this happen and how to solve this?
I was installing GCC and i followed the steps below and got the error, can anyone tell me on whats the error!.
I downloaded gcc-4.3.0
ftp://ftp.gnu.org/gnu/gcc/gcc-4.3.0/gcc-4.3.0.tar.bz2
from [url]
/usr/local/gcc/gcc-3.4.4/configure
--prefix=/opt/gcc34
--program-suffix=12
--enable-languages=c,c++
Error below!
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln works... yes
checking whether ln -s works... yes
checking for gcc... no
checking for cc... no
checking for cc... no
checking for cl... no
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
When a user login in my squirremail webmail and try to click on Options > Personal Information they get this message:
ERROR:
Error opening timezone config, contact administrator.
The version of my squiremail is 1.4.9
Error: Missing Dependency: php = 4.3.9-3.22.9 is needed by package php-mysql
above is the error if i try to install php-mysql
tried several times:
yum install php-mysql
but i get the same error everytime
i am using Centos4 + PHP5 + mySQL5
Does anyone have a recommendation for the eaccelerator eaccelerator.shm_ttl setting? If it was left at the default of "0", this means no newer scripts would ever be cached once the memory is full. Or would it do additional caching on disk as well and not show up in the phpino.php file?
We have alloted 32 Megs of Ram for eA. Maybe something like this would help move some old scripts out of the cache?
eaccelerator.shm_ttl="86400"
eaccelerator.shm_prune_period="0"
I get this error by installing joomla attached...
View 2 Replies View RelatedI'm trying to install PPA on a server, but I'm getting an error during installation:
[INFO]: Checking current user privileges...
[INFO]: Checking critical environment requirements...
[INFO]: Determining OS parameters...
[INFO]: Detected OS: CentOS-6-x86_64
[INFO]: Getting SELinux state...
[Code] ....
i get this error after installation my vb in my site
View 14 Replies View RelatedInstalling Plesk Panel with Spamassassin on Ubuntu 14.04 LTS gives a significant error:
Restarting SpamAssassin Mail Filter Daemon: No /usr/bin/perl found running; none killed.
server socket setup failed, retry 1: spamd: could not create IO::Socket::INET6 socket on [::1]:783: Cannot assign requested address
server socket setup failed, retry 2: spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use
server socket setup failed, retry 9: spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use
spamd: could not create IO::Socket::INET6 socket on [127.0.0.1]:783: Address already in use
invoke-rc.d: initscript spamassassin, action "restart" failed.
dpkg: error processing package sa-compile (--configure):
even though spamassassin (i.e. spamd) is not running. The usual suspects for the before mentioned error, being
a) differences in the name of the PIDFILE variable in /etc/default/spamassassin and /etc/init.d/spamassassin
b) directory and/or file location are not readable/writable
are not causing this specific installation bug. The work-arounds:
1 - not installing spamassassin (not an option)
2 - installing spamassassin and (afterwards)
change /etc/default/spamassassin, add the option "-4" to the line OPTIONS, resulting in the line: OPTIONS="--nouser-config -4 --username=popuser --daemonize --helper-home-dir=/var/qmail --virtual-config-dir=/var/qmail/mailnames/%d/%l/.spamassassin --create-prefs --max-children=5"
run plesk-installer or autoinstaller again ..Work-around 2 works fine, after reinstallation the /etc/default/spamassassin is as it should be (note that the added "-4" is not present anymore).
The before mentioned work-around suggests some error in the installation process, very likely to be an issue with the chronological order of installation of the various components. In theory, it can be excluded that this bug/issue is caused by psa-spamassassin and/or spamassassin (version 3.3.x) packages, even though some current spamassassin bugs are known: URL....I sincerely hope that Parallels Team can investigate and patch both of the bugs/issues.
Windows setup: Plesk Panel 11.5 - Server 2012r2 - IIS 8.5 - PHP 5.3/5.4/5.5 - mySQL/MSSQL. Server runs behind firewall (NAT). Setup with local DNS pointing all A records towards public IP.
Situation:
Installed Wordpress through Plesk applications. (mysql). URL....Installs themes in WP console. Everything ok. Installs theme from file, site gets an 500 error. Sometimes installation of theme goes fine, but once activated or previewed it shows 500 error.
Error:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.Please contact the server administrator to inform of the time the error occurred and of anything you might have done that may have caused the error.
on my Ubuntu 14.04 LTS server, I have ran the install script. This process stopped with the message: ERROR while trying to establish test connection. If you are installing Plesk on an already configured MySQL server, you need to specify the administrator's credentials to succeed with the installation.
To do this, you need to create a file - /root/.my.cnf with the 'client' section where you need to provide user and its password ("user = $admin_name" and "password = $admin_pass").
After installation is finished, the file /root/.my.cnf will be renamed to /root/.my.cnf.bak
Check the error reason(see log file: /var/log/plesk/install/plesk_12.0.18_installation.log), fix and try again
Accordingly, I have the existing my.conf copied to the ROOT directory and added the two missing lines in the client area. After that I started the plesk-installer.sh again. The process stopped at a line
"Installed product components are determined" and nothing still happend. The log files says nothing but the last information at the previous try.
Iupdate to plesk 12.0.18
I tried to install open-xchange from application vault.
I got the following error message: Fehler: Die Installation von Open-Xchange ist fehlgeschlagen. Non-zero exit status returned by script. Output stream: 'Creating OX context user_30 Not Found Failed to create OX context user_30: Not Found '. Error stream: 'Creating OX context user_30 Not Found Failed to create OX context user_30: Not Found '.
the following properties I made:
public ox website: http://ox.mydomain.de
ox installation server: myip
We're having problems with the Roundcube webmail spell check, and upon checking the log we get the error 'Unable to find the socket transport SSL'. From what I can find out this is normally due to Open SSL not being enabled, but it is, you can check our php config here.
View 3 Replies View RelatedI'm trying to install worpress manually but I can't get the WP do initiate the installation process.
I give a HTTP 500 error
I have Windows 2012 R2 server.
I got and apt-get dependencies error while installing Postfix. At the end the log told me, to ask for free support - thats what I am trying to get here.
My system is Debian Wheezy with Plesk 12.0.18
How can I re-enable my Postfix?
When you perform a migration, Plesk gives me this error. For more I search, I find what may be the cause.
Error: Unable to find domain with name 'e-domain.com'[2014-11-18 19:41:31] ERR [panel] exception 'PleskObjectNotFoundException' with message 'Unable to find domain with name 'e-domain.com'' in /usr/local/psa/admin/plib/Domain.php:950
Stack trace:
#0 /usr/local/psa/admin/plib/backup/Conflicts/PleskDataManager.php(1278): Domain::getByName('e-domain.c...')
#1 /usr/local/psa/admin/plib/backup/Conflicts/Resolver/UnfitSettingsResolver.php(500):
[Code] .....
I am trying to install Joomla on httpme.com but I seem to have problems with it recognising the username/password. Could it be a localhost issue or something?
I just can't seem to get a solution to this. I am referring to step 1 of the Joomla installation.
