Redundant Config
Mar 18, 2007
I've decided to move from managed hosting to colocated hosting and I'm in a bit over my head as far designing the server configuration goes. I'm looking for assistance with setting up a fully redundant configuration with no SPOF (single point of failure).
The colo provider ensures full redundancy to the cabinet, terminating with two network drops from diverse bandwidth providers and HSRP. I need to eliminate all SPOFs inside the cabinet.
Some questions...
1) I'm thinking of using the Cisco 2960 Series switch as the in-cabinet distribution switch. I believe it supports HSRP. From my understanding, the switch will automatically failover from one uplink to the other in case of a network problem on one of the uplinks, and this will all be transparent to any servers connected to the switch. Is this correct?
2) However, this introduces the switch as SPOF. So, I believe what I need to do is ask the colo for a second pair of network drops and deploy a pair of 2960's. Then I would connect each server to both switches via separate NICs. Is this correct?
3) Finally, assuming I am on the right track here, I would like this to all be transparent and automatic with no human intervention required to recover from a switch failure. The servers will be running RHEL 4. How would I configure the network interfaces on the servers so that they can transparently use either (or both) of the switches? Is there some way to assign the same IP address to more than one interface? How does the OS keep from getting confused about where to send the traffic?
Thanks in advance for any insight. I would also be happy to hear recommendations for excellent network consultants that I could hire to design and implement this configuration for me.
View 14 Replies
ADVERTISEMENT
Oct 6, 2009
I have been working on and designing a hosting company. Now setting up my names servers has came to a question. When I ran a previous business with a partner he only use Name Servers on 1 Machine in 1 location.
Now my question is my first server is going to be located in New Jersey, USA . So that is where My first set of DNS starts. With my previous partner I noticed most of the customers were based in Europe, Philippines, etc. Over seas. Now What I am asking is Will a VPS in a different location work for DNS Server. That way I can keep a lower budget till we get a few customers under out belt.
View 9 Replies
View Related
Apr 8, 2009
Because of the attack on theplanet yesterday, my sites were down.
People are mentioning adding "redundant DNS servers" to protect against downtime in future attacks.. but I haven't found any info on how to set these up.
I also seen somebody post that the planet doesn't allow "zone transfers" so I'm a bit confused at how to proceed.
I just registered an account at [url] and I'm unsure on where to begin. Their FAQ is just a large photo.
My .com is registered at Godaddy. Do I edit records at godaddy to point to the server IP? Or do I have to edit records via WHM?
View 4 Replies
View Related
Aug 13, 2009
I currently run spiderloop.com a SEO control panel designed for windows hosting accounts. The site and web service is hosted on our own server and works great, however I am concerned about redundancy and do not want to purchase a whole other server just to be fail safe. So I am going to purchase a shared hosting account to facilitate redundancy.
So here is the question.
How do I do it? How do I set up my current host to redirect to the new host when it goes down?
If the current host has problems how can I force the users browser to redirect to the redundant host? I simply don't understand.
View 4 Replies
View Related
May 28, 2008
I have a renewal bill for my hosting account, but I can't see if I have any domains in it and therefore not sure if I should cancel it or not. I am with bright-byte.
Can I do a domain tools reverse search or something on the domain so it can tell me which of my domains are with that host?
View 7 Replies
View Related
Sep 15, 2007
I have two servers. One hosts about 55 small sites and the other does nothing.
Can I make use of the spare one to take over automatically if the main server fails for whatever reason?
I had been thinking of using Rsync to backup accounts / mail every 6 hours or so and then manually changing the nameservers on the domains in the event of server1 failing. Would that even work? Then I got thinking about it all being automatic.
View 4 Replies
View Related
Apr 14, 2007
I have a few VPS's, the main one has cPanel/WHM and runs all my sites / email / DNS and MySQL DB's. Heres a little info:
VPS1 - CentOS 4.4, cPanel/WHM, runs all domains (OpenVZ)
VPS2 - CentOS 4.4, Webmin, Slave DNS to VPS1 using Webmin cluster (OpenVZ)
VPS3 - CentOS 4.4, Webmin, Slave DNS to VPS1 using Webmin cluster (Xen)
However, if VPS1 fails for say 24 hours, im screwed!
So, my question is can I get some kind of redunadancy built in somewhere. For example if someone is trying to access my domain "mydomain.com" and the main VPS is down, then the request for the site would go to VPS2, or VPS3...
The same for the mail server, if some is sending mail to one of the domains on the VPS, and the main VPS was down, the mail would be sent to my other VPS's.
I just don not like the fact there is a single point of failure!
I do have WHM managed Weekly and Monthly backups of all cPanel accounts etc.
View 4 Replies
View Related
Jun 11, 2009
We are a hosting company in Colombia, and we want start selling corporate email service.
The main idea is have two servers with redundance, I think this servers have to share the filesystem I don't know if using a scsi disk or just a network file system. We also want to have a good appliance for stop the SPAM, Im not so sure if we need to have redundance on it, its ideal but we are just starting the bussines and we dosn't have cliets yet.
Can anyone share their setup with us, and give us recomendations or tips?
Another option is, if someone know how to do that and have implemented this setup before and want to work $$ with us to implement that, please contact me to jbravo[at]colombiahosting.com.co
View 1 Replies
View Related
Aug 29, 2007
to setup a Windows server that can support the failure of the switch that comes before it in the network diagram. The idea would be that if the 15A circuit the switch was on failed, or the switch just died, the server would still be online.
I already have two switches in spanning tree just before the server. Is there a way to assign a single IP to the server on both its network cards and connect each card to a different (spanning tree'd) switch?
View 14 Replies
View Related
Jul 30, 2007
I'm upgrading my server again and now that we have 8 disks we need to upgrade our power supply (I was told).
But do I really need a redundant power supply Or can I just buy ONE 650 watt to upgrade?
These are my current server specs:
Quote:
2 X AMD opteron 270 dual core
2 X 2 GB kingston PC3200 DDR ram
2 X 1 GB kingston PC3200 DDR ram
(6 GB total)
8 X seagate cheetah 15k.5 SCSI 73.4 GB, U320, SCA in raid 10
1 X LSI megaraid 320-2x raid controller, dual channel
1 X Tyan thunder 8KSE (s2892) mobo
1 X 2 * 4 port chenbro scsi backplane (8 ports total)
2 X AMD CPU cooler
2 X 40X40X10 fans
(Currently 1 X zippy P2G-6510P, 2U, single power supply, 510 Watt)
1 X Sony FDD 1.44"
1 X chenbro RM311, 3U case with 8 hot swap bays
1 X LG DVD/CD-rom burner
View 14 Replies
View Related
Jun 5, 2007
I'm in the process to setup a new service with an ISP with the following scenario and need your help.
I've got the rack (42U), servers and switches. Only routers has been left and here is that I need your help.
I have also 2 ports from the ISP where I can connect my routers. I need to get 2 router devices with auto sync feature in order to be able to setup a redundant plan in case that one of them goes down.
Those routers should have firewall features too in order to avoid setup iptables rules for each server. A basic DDoS protection is needed too.
I'm going to push around 100Mbit of traffic across the servers but that will happen after 3-4 months from the initial setup. In the first instance no more than 10-20Mbit will be used.
I heard a lot about Cisco but got no idea what model is the most suitable for my case. I will probably need a module for DDoS attacks and another one for advanced security IOS from what I read but it is not clear to me.
View 4 Replies
View Related
Nov 5, 2008
Looking for redundant setup, round robin?
I'm looking to make high availability setup, and wondering how many of you have made it so?
we are looking to multi-home the page with a round robin setup, using multiple VPSs/dedicated servers geographically different locations.
Right now i'm still looking at "stale" DNS setup, no automanagement of servers down. Is there a service/software which already offers automatic changes of zones for removing servers which are down, and adding them back when they get back online?
Do i need to custom tailor everything?
View 7 Replies
View Related
Jan 10, 2008
I have a DB server, running mysql 64bit. I would like to add another server to the mix to build some kind of redundancy if the 1st one were to go down.
View 7 Replies
View Related
Sep 22, 2009
I currently own several servers: let's say sites on 3 of those servers rely on a website that sits on server 4
If server 4 goes offline, then servers 1 2 and 3 suffer a lack of usability.
The website on server 4 is very small and fast, but receives several hundred thousand visits a day
I figured it would be a good idea to replicate that website on each of my servers, but I'm unsure about how to set up a good redundancy system..
Using several nameservers doesn't work as expected (visitors are randomly sent to one of the nameservers, in no particular order)
View 9 Replies
View Related
Oct 18, 2009
So the rule of thumb is if you have a 30A circuit to not exceed 80% or 24A.
If I buy a 30A circuit, I am assuming it is protected by a circuit breaker that is 30A, correct?
In *theory* we could run 29-30A all day and be fine.
So, I understand, the rule of 80% to be to the effect that "during startup, equipment uses more power ... or during runtime if it heats up, the fans go faster using more power" so it is safe to be at 24A in case you get spikes to 27-29A.
Is my reasoning correct?
Further, if you run primary/redundant circuits, is there really harm in running 13A on one circuit and 14A on the other.. and in the unlikely event of a failure, you are running 27A on one circuit (at 90% instead of 80%).
Any thoughts on this? Getting an extra 3A out of a 208V circuits is like putting in 3-4 more servers. If someone is doing this please let me know. I think it would work fine but i would like to know from the experts that do the colo stuff for a living what problems i could encounter, if any.
View 14 Replies
View Related
Sep 29, 2009
Who are the reputed hosts in the market that comes with "Lightspeed Host with Redundant Servers"?
View 14 Replies
View Related
Apr 15, 2008
We have 2 linux servers with plesk. We want Redundant Dns and backup mail servers for our hosting domains. We already setup Primary nameserver ip address is first server, Sec Nameserver ip address is second Server. like
ns.ourdomain.com - first server ip address
ns1.ourdomain.com - Second server IP Address
and how can setup backup mail server for both servers
View 2 Replies
View Related
Jul 7, 2009
I have a LAMP server running and would like to have the exact mirror running on another location. I would like to sync the web files and database in either real time (upon any update) or in delayed mode (x minutes after the update).
For MySQL, I believe replication can do the job unless anybody has better recommendation. What would you guys suggest for web files? Can I use different Linux flavor but maintain back the same LAMP version?
Is there any "online" 3rd party load balancing service that I could use to load balance the traffic to both servers?
View 14 Replies
View Related
Oct 29, 2008
I have registered a domain using godaddy. I have hosted my site on a server of my shared hosting provider(lets call them X).Currently I have pointed mydomain.com to the server and it is up and running.Sometimes, I have experienced downtimes.
In order to solve this problem, I have hosted a clone of my site on another server from another hosting company(lets call them Y).
1. I want mydomain.com to point to Y when X is down
2. again point it to X when it is up.
My main aim is to have my site live with less downtime. The probability having both servers down is very less.
I dont know if it is technically feasible, just a thought out of dirty mind. I tried to google but was not able to find an answer specific to my problem.
Can anybody tell me how to achieve this through godaddy domain.
Added note, My site is not a commercial site and I cant afford large dedicated servers with clustering and failovers.
View 13 Replies
View Related
May 15, 2007
a dell 1750 with redundant power supply that has two plugs on the back.
But...
Looking at 1U colo with only one plug available for the 1U price.
Is the only solution to use only one of the two power supplies in the Dell 1750...?
View 4 Replies
View Related
May 5, 2009
Server :
Code:
Intel C2Q Q9450
8196 MB DDR2 RAM
500 GB 7.200RPM
2000GB Transfer p/m
OS: CentOS 5.2
Code:
running a ipb forum site 2.3.4
current stats :
Our members have made a total of 245,827 posts
We have 14,673 registered members
Total number of topics is 75099
with atleast 150 members online + 200guests.
what would be the perfect my.cnf config for this kinda of a server? Im running litespeed.
View 4 Replies
View Related
Jan 3, 2008
I am trying to install a newer release of APC PHP cache on our server that runs RHES-4 and PHP 4.3.9
I installed version 3.0.14 some time ago and now cannot install the new v3.0.16. When I run ./configure I get this:
Quote:
[root@xxxx APC-3.0.16]# ./configure --enable-apc --enable-apc-mmap --with-apxs --with-php-config
configure: error: cannot run /bin/sh ./config.sub
The baffling thing is that I also cannot now reinstall 3.0.14 as it shows the same error.
I also get this error if I try to install XCache.
View 4 Replies
View Related
Jun 4, 2009
I have tried to manually setup awstats on a website in Windows 2008 with IIS 7. The problem here is that I have to create two conf files for each website, one named awstats.sitename.conf and the other awstats.www.sitename.conf. If I don't do so, then awstats does not work on either www.sitename.com or sitename.com. I cannot update the stats or view it from the browser. I have a few Hosting controller servers in which awstats is used and I compared the conf file with them and there is no difference. I wonder what could be the issue.
View 1 Replies
View Related
Oct 30, 2008
i have a dedicated server without any daily, weekly, monthly backup.
please help me (Step by Step)to setup configuration my server to take backup every day within (some account) at (3 AM).
i mean setting for every day about some account (A,B,C...Z) at the 3 AM
View 6 Replies
View Related
Mar 27, 2008
I have a domain, ex: hangnguyen.com at godaddy, I changed nameserver to ns1.everydns.net, ns2.everydns.net, ns3.everydns.net .
Now I order a shared hosting at bluehost, I should change nameserver to ns1.bluehost.com, ns2.bluehost.com to make it works .
But I want keep the nameserver ns1.everydns.net ....
So how I config my domain in everydns control panel to let my domain work on bluehost?
View 3 Replies
View Related
Jan 20, 2008
Switching from Windows DNS to bind DNS. Slightly different as I have to learn the commands instead of using the GUI. Can you tell me if the below config is correct to run mydomain.net so people can access it from the web? It will also be acting as its own name servers. This is purely for external DNS. The private IPs will be changed to routable ones once its in the DC.
Have I missed anything or is that good enough for deployment to the live environment?
I have this in /etc/bind/zones/mydomain.net.db
; mydomain.net
$TTL 604800
@ IN SOA ns0.mydomain.net. admin.mydomain.net. (
2008012001 ; Serial
604800 ; Refresh
86400 ; Retry
2419200 ; Expire
604800); Negative Cache TTL
; nameservers
mydomain.net IN NS ns0.mydomain.net
mydomain.net IN NS ns1.mydomain.net
ns0 IN A 192.168.1.15
ns1 IN A 192.168.1.16
;mail
mail IN MX 10 mail
mail IN A 192.168.1.17
; web
IN A 192.168.1.17
www IN A 192.168.1.17
And in /etc/bind I have this in my named.conf.local file
# This is the zone definition for // mydomain.net //
zone "mydomain.net" {
type master;
file "/etc/bind/zones/mydomain.net.db";
};
View 8 Replies
View Related
Oct 23, 2008
I have had many dedicated servers in the past but other people managed to configure them up.
I basicly want to host somedomain.com and somedomain2.com on a windows server that is located on XX.XXX.XXX.XX
The server has apache and php installed, which is just what I need. I am having an hard time configuring the domains I want to use on the server in order to make em "work" on the server.
View 4 Replies
View Related
Feb 20, 2007
I've installed MRTG, but am having problems making the config file, all I want to do is monitor the in/out bandwidth (2 graphs) on my own server, has anyone got an example file they could paste here?
View 3 Replies
View Related
Aug 23, 2007
I am a newbie and now i am running a VPS account. I have some questions want to ask you
Where is the locate of phpMyAdmin?
I am running VPS server but get error when access to phpmyadmin.
Quote:
Wrong username/password. Access denied.
I created a user=root and passworld=xxx in my WHM.
How to find config.inc.php ?
- locate but error
Quote:
warning: locate: could not open database: /var/lib/slocate/slocate.db: No such file or directory
warning: You need to run the 'updatedb' command (as root) to create the database.
Please have a look at /etc/updatedb.conf to enable the daily cron job.
View 4 Replies
View Related
Jan 11, 2007
Does someone know a basic or well config for mysql 3.23. I dont need something fancy just something that isn't what i have now (defaults).
Here is my current config. It sucks right? I have mainly forum websites and its alreaydu eating all RAM.
safe-show-database
innodb_data_file_path=ibdata1:10M:autoextend
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
set-variable=max_connections=300
set-variable=max_user_connections=10
set-variable=max_allowed_packet=1M
set-variable=thread_stack=128K
set-variable=key_buffer=128M
set-variable=table_cache=300
set-variable=record_buffer=8M
set-variable=back_log=100
set-variable=thread_cache_size=4
set-variable=sort_buffer=16M
set-variable=delayed_insert_timeout=150
set-variable=interactive_timeout=40
set-variable=wait_timeout=40
set-variable=connect_timeout=10
[mysql.server]
user=mysql
basedir=/var/lib
[safe_mysqld]
err-log=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid
View 7 Replies
View Related
Aug 23, 2007
I have a problem when i config config.inc.php file in my WHM . I don't know why share accounts can access to phpMyAdmin or create your database from cpanel .
This is a part of config.inc.php file
Quote:
/**
* Disable the default warning that is displayed on the DB Details Structure page if
* any of the required Tables for the relationfeatures could not be found
*/
$cfg['PmaNoRelation_DisableWarning'] = FALSE;
/**
* The 'cookie' auth_type uses blowfish algorithm to encrypt the password. If
* at least one server configuration uses 'cookie' auth_type, enter here a
* passphrase that will be used by blowfish. The maximum length seems to be 46
* characters.
*/
$cfg['blowfish_secret'] = '';
/**
* Server(s) configuration
*/
$i = 0;
// The $cfg['Servers'] array starts with $cfg['Servers'][1]. Do not use
// $cfg['Servers'][0]. You can disable a server config entry by setting host
// to ''. If you want more than one server, just copy following section
// (including $i incrementation) serveral times. There is no need to define
// full server array, just define values you need to change.
$i++;
$cfg['Servers'][$i]['host'] = 'localhost'; // MySQL hostname or IP address
$cfg['Servers'][$i]['port'] = ''; // MySQL port - leave blank for default port
$cfg['Servers'][$i]['socket'] = ''; // Path to the socket - leave blank for default socket
$cfg['Servers'][$i]['ssl'] = false; // Use SSL for connecting to MySQL server?
$cfg['Servers'][$i]['connect_type'] = 'tcp'; // How to connect to MySQL server ('tcp' or 'socket')
$cfg['Servers'][$i]['extension'] = 'mysql'; // The php MySQL extension to use ('mysql' or 'mysqli')
$cfg['Servers'][$i]['compress'] = FALSE; // Use compressed protocol for the MySQL connection
// (requires PHP >= 4.3.0)
$cfg['Servers'][$i]['controluser'] = ''; // MySQL control user settings
// (this user must have read-only
$cfg['Servers'][$i]['controlpass'] = ''; // access to the "mysql/user"
// and "mysql/db" tables).
// The controluser is also
// used for all relational
// features (pmadb)
$cfg['Servers'][$i]['auth_type'] = 'config'; // Authentication method (valid choices: config, http, HTTP, signon or cookie)
$cfg['Servers'][$i]['user'] = ''; // MySQL user
$cfg['Servers'][$i]['password'] = ''; // MySQL password (only needed
// with 'config' auth_type)
$cfg['Servers'][$i]['SignonSession'] = ''; // Session to use for 'signon' auth method
$cfg['Servers'][$i]['SignonURL'] = ''; // URL where to redirect user to login for 'signon' auth method
$cfg['Servers'][$i]['LogoutURL'] = ''; // URL where to redirect user after logout
$cfg['Servers'][$i]['nopassword'] = FALSE; // Whether to try to connect without password
$cfg['Servers'][$i]['only_db'] = ''; // If set to a db-name, only
// this db is displayed in left frame
// It may also be an array of db-names, where sorting order is relevant.
$cfg['Servers'][$i]['hide_db'] = ''; // Database name to be hidden from listings
$cfg['Servers'][$i]['verbose'] = ''; // Verbose name for this host - leave blank to show the hostname
$cfg['Servers'][$i]['pmadb'] = ''; // Database used for Relation, Bookmark and PDF Features
// (see scripts/create_tables.sql)
// - leave blank for no support
// DEFAULT: 'phpmyadmin'
$cfg['Servers'][$i]['bookmarktable'] = ''; // Bookmark table
// - leave blank for no bookmark support
// DEFAULT: 'pma_bookmark'
$cfg['Servers'][$i]['relation'] = ''; // table to describe the relation between links (see doc)
// - leave blank for no relation-links support
// DEFAULT: 'pma_relation'
$cfg['Servers'][$i]['table_info'] = ''; // table to describe the display fields
// - leave blank for no display fields support
// DEFAULT: 'pma_table_info'
$cfg['Servers'][$i]['table_coords'] = ''; // table to describe the tables position for the PDF schema
// - leave blank for no PDF schema support
// DEFAULT: 'pma_table_coords'
$cfg['Servers'][$i]['pdf_pages'] = ''; // table to describe pages of relationpdf
// - leave blank if you don't want to use this
// DEFAULT: 'pma_pdf_pages'
$cfg['Servers'][$i]['column_info'] = ''; // table to store column information
// - leave blank for no column comments/mime types
// DEFAULT: 'pma_column_info'
$cfg['Servers'][$i]['history'] = ''; // table to store SQL history
// - leave blank for no SQL query history
// DEFAULT: 'pma_history'
$cfg['Servers'][$i]['designer_coords'] = ''; // table to store the coordinates for Designer
// - leave blank for no Designer feature
// DEFAULT: 'pma_designer_coords'
$cfg['Servers'][$i]['verbose_check'] = TRUE; // set to FALSE if you know that your pma_* tables
// are up to date. This prevents compatibility
// checks and thereby increases performance.
$cfg['Servers'][$i]['AllowRoot'] = TRUE; // whether to allow root login
$cfg['Servers'][$i]['AllowDeny']['order'] // Host authentication order, leave blank to not use
= '';
$cfg['Servers'][$i]['AllowDeny']['rules'] // Host authentication rules, leave blank for defaults
= array();
// If you have more than one server configured, you can set $cfg['ServerDefault']
// to any one of them to autoconnect to that server when phpMyAdmin is started,
// or set it to 0 to be given a list of servers without logging in
// If you have only one server configured, $cfg['ServerDefault'] *MUST* be
// set to that server.
$cfg['ServerDefault'] = 1; // Default server (0 = no default server)
/**
* Other core phpMyAdmin settings
*/
$cfg['MaxDbList'] = 100; // maximum number of db's displayed in left frame and databaes list
$cfg['OBGzip'] = 'auto'; // use GZIP output buffering if possible (TRUE|FALSE|'auto')
$cfg['PersistentConnections'] = FALSE; // use persistent connections to MySQL database
$cfg['ForceSSL'] = FALSE; // whether to force using https
$cfg['ExecTimeLimit'] = 300; // maximum execution time in seconds (0 for no limit)
$cfg['MemoryLimit'] = 0; // maximum allocated bytes (0 for no limit)
$cfg['SkipLockedTables'] = FALSE; // mark used tables, make possible to show
// locked tables (since MySQL 3.23.30)
$cfg['ShowSQL'] = TRUE; // show SQL queries as run
$cfg['AllowUserDropDatabase'] = FALSE; // show a 'Drop database' link to normal users
$cfg['Confirm'] = TRUE; // confirm 'DROP TABLE' & 'DROP DATABASE'
$cfg['LoginCookieRecall'] = TRUE; // recall previous login in cookie auth. mode or not
$cfg['LoginCookieValidity'] = 1800; // validity of cookie login (in seconds)
$cfg['LoginCookieStore'] = 0; // how long login cookie should be stored (in seconds)
$cfg['LoginCookieDeleteAll'] = TRUE; // whether to delete all login cookies on logout
$cfg['UseDbSearch'] = TRUE; // whether to enable the "database search" feature
// or not
$cfg['IgnoreMultiSubmitErrors'] = FALSE; // if set to true, PMA continues computing multiple-statement queries
// even if one of the queries failed
$cfg['VerboseMultiSubmit'] = TRUE; // if set to true, PMA will show the affected rows of EACH statement on
// multiple-statement queries. See the libraries/import.php file for
// hardcoded defaults on how many queries a statement may contain!
$cfg['AllowArbitraryServer'] = FALSE; // allow login to any user entered server in cookie based auth
// Left frame setup
$cfg['LeftFrameLight'] = TRUE; // use a select-based menu and display only the
// current tables in the left frame.
$cfg['LeftFrameDBTree'] = TRUE; // turn the select-based light menu into a tree
$cfg['LeftFrameDBSeparator'] = '_'; // the separator to sub-tree the select-based light menu tree
$cfg['LeftFrameTableSeparator']= '__'; // Which string will be used to generate table prefixes
// to split/nest tables into multiple categories
$cfg['LeftFrameTableLevel'] = '1'; // How many sublevels should be displayed when splitting
// up tables by the above Separator
$cfg['ShowTooltip'] = TRUE; // display table comment as tooltip in left frame
$cfg['ShowTooltipAliasDB'] = FALSE; // if ShowToolTip is enabled, this defines that table/db comments
$cfg['ShowTooltipAliasTB'] = FALSE; // are shown (in the left menu and db_structure) instead of
// table/db names. Setting ShowTooltipAliasTB to 'nested' will only
// use the Aliases for nested descriptors, not the table itself.
$cfg['LeftDisplayLogo'] = TRUE; // display logo at top of left frame
$cfg['LeftLogoLink'] = 'main.php'; // where should logo link point to
// (can also contain an external URL)
$cfg['LeftLogoLinkWindow'] = 'main'; // whether to open the linked page
// in the main window ('main')
// or in a new window ('new')
$cfg['LeftDisplayServers'] = FALSE; // display server choice at top of left frame
$cfg['DisplayServersList'] = FALSE; // server choice as links
$cfg['DisplayDatabasesList'] = FALSE; // database choice in light as links
// In the main frame, at startup...
$cfg['ShowStats'] = TRUE; // allow to display statistics and space usage in
// the pages about database details and table
// properties
$cfg['ShowPhpInfo'] = FALSE; // show php info link
$cfg['ShowServerInfo'] = TRUE; // show MySQL server information
$cfg['ShowChgPassword'] = FALSE; // show change password link
$cfg['ShowCreateDb'] = TRUE; // show create database form
$cfg['SuggestDBName'] = TRUE; // suggest a new DB name if possible (false = keep empty)
Some questions
--------------------------------------------------
$cfg['Servers'][$i]['controluser'] =?
$cfg['Servers'][$i]['controlpass'] =?
--------------------------------------------------
$cfg['Servers'][$i]['user'] =?
$cfg['Servers'][$i]['password'] =?
View 2 Replies
View Related
