Server-cannot Get It To Work
Sep 13, 2007
I doubt that anyone can solve this, but here goes...
This is my first server, and I simply cannot get it to work.
MY CONFIGURATION:
Speedstream 4200 DSL modem w/ethernet line to NETGEAR Wireless Router (WPN824). The router connects with CAT5 cable to my Windows XP server computer (which has the latest Apache and PHP). Wirelss signal is used for my other computer.
I am running Apache with no-ip as well. My site name is: [url]
MY PROBLEM:
I have set up HTTP port forwarding in my modem (which for some reason acts as a router as well) to port 80, with my server address as 192.168.254.10 The problem is that I cannot connect to my web site within my network. My friend is able to view the website from his home.
I am not able to configure my NETGEAR router to accept the port forwarding of 192.168.254.10 because it isn't a "valid LAN address" --- but I can't configure my modem to use a different address either.
1. My modem is plugged into the Internet Port on my WPN824
2. My XP server is plugged into one of the four LAN PORTS on my WPN824
3. My modem is set to forward port 80 to 192.168.254.10
4. My WPN824 is set to forward port 80 to your XP server address 192.168.1.3
Obviously something is wrong with my guess, because just forwarding the modem to 192.168.254.10 doesn't seem like it could get my friend connected all the way through to your Apache server.
IP ADDRESSES:
Default Gateway: 192.168.254.254
XP/Apache: 192.168.1.3
Speedstream 4200 Modem: 192.168.254.254
NETGEAR: 192.168.1.1
Server (forwarded on 80): 192.168.254.10
The 'default gateway' is set to (according to an ipconfig run) 192.168.1.1 (NETGEAR router) However, the 'default gateway' in the NETGEAR router page says that "gateway IP address" is 192.168.254.254 (modem)...
STATIC IP?
Also, my Network Connections is set to 'obtain IP address automatically'. I have tried to set it to a static IP, but it doesn't work. The router wil not allow me to forward to the server with any IP that is?.254.?
Unfortunately, this setup is very complicated and I think that something is conflicting.
I have this felling that I'm really close but that something very small is in the way.
View 7 Replies
ADVERTISEMENT
Jul 1, 2009
I did an apache rebuild and about two hours later, my mysql stopped working.
So i tried various rebuilds to see if perhaps it was suoshin (this caused php to stop working on my server before) but to no avail, this hasnt fixed it. I cant even access the databases via phpmyadmin.
I've restarted the mysql server, apache, i've rebooted a couple times. I don't know what to do.
View 7 Replies
View Related
Apr 24, 2008
I have a dedicated server, on this server I have only 2 website.
I created an account before and that account work correctly.
now I created a new account and when I trying to run a simple php file show me "Internal Server Error".
I can view html files and I haven't .htaccess file .
Server Inofrmation:
CentOS , cPanel , Apache 2, PHP 5
View 11 Replies
View Related
Oct 23, 2008
I have order 2 servers from ftp at October 12 2008, both are setup at same time!
At October 13, the general support tell me that server have been hacked? I haven't start using both servers, why them are been hacked? they said the problem is sloved... so ok...
I got plesk installed on both server, but both server ftp not working. the ftp module is installed but i cannot connect from anywhere on the work!
I create 4 new ticket to sales, general support and billing, but no one want slove the problem, they reply me like this:
""We offer only the default OS installs.
The helpdesk does not provide support in configuration of any software packages. You may however contact our managed services department at help@fdcservers.net for a price/availability quote. If you would like us to move your ticket to their department, please let us know.""
the server is setup error and got hacker attack it, they just leave it without doing anything, what should i do?
I already write a ticket to cancel servers, but until now no response!
I just want you guy to know, If alphared don't have problems, i will still stay with them! I will never use FDCservers any more!
View 10 Replies
View Related
Aug 12, 2007
is there a way to change your server so that if you're trying to link to site.com/a/page.html through a link on site.com/b/page.html you can simply put /a/page.html instead of having to put ../a/page.html? I've noticed that some sites don't use the .. and was wondering how I could do the same.
View 1 Replies
View Related
Jul 31, 2007
say you run a script like DIGG and then it just became huge and huge and one day u find out that a server cannot run it alone, that is u need to get multi servers to cope with the traffic and database requests. How would people go about doing that? Is it the script implementation side of change or just server side of change?
View 3 Replies
View Related
Dec 10, 2007
i want to install a red5 streaming server on FreeBSD6.2
The install was no problem and i get no errors.
So far so good.
But, i want to stream with the rtmp protocal so i used flv player to test. The link i tried was rtmp://xxx.xxx.xxx.xxx/oflaDemo/Transformers.flv (standard red5 example file)
But i get nothing on the screen, i tried a lot of other urls but no succes, red5 seems to work (see below for details)
How can i test of red5 works after a standard installation?
Netstat -ant
tcp4 0 0 xxx.xxx.xxx.xxx.1935 *.* LISTEN
tcp4 0 0 xxx.xxx.xxx.xxx.5080 *.* LISTEN
tcp4 0 0 xxx.xxx.xxx.xxx.8088 *.* LISTEN
conf/red5.properties
# HTTP
http.host=xxx.xxx.xxx.xxx
http.port=5080
# RTMP
rtmp.host=xxx.xxx.xxx.xxx
rtmp.port=1935
rtmp.event_threads_core=16
rtmp.event_threads_max=32
# event threads queue: -1 unbounded, 0 direct (no queue), n bounded queue
rtmp.event_threads_queue=-1
rtmp.event_threads_keepalive=60
rtmp.send_buffer_size=271360
rtmp.receive_buffer_size=65536
rtmp.ping_interval=5000
rtmp.max_inactivity=60000
# RTMPT
rtmpt.host=xxx.xxx.xxx.xxx
rtmpt.port=8088
rtmpt.ping_interval=5000
rtmpt.max_inactivity=60000
# Debug proxy (needs to be activated in red5-core.xml)
proxy.source_host=127.0.0.1
proxy.source_port=1936
proxy.destination_host=127.0.0.1
proxy.destination_port=1935
View 0 Replies
View Related
Dec 8, 2006
we've been running our software on apache 1.3 for years with no problems. We have a new server running apache2 and now none of our mod_rewrite works. Is there something extra that needs to be done with apache 2 to get mod_rewrite working? The module is definitely loaded (first thing I checked). If we turn on allowOverride from None to All in the httpd.conf we get completely blank pages. Our regular php pages work fine with allowoverride set to none, but they all break when it is set to all. Please help. This is the second time we have run into this on apache 2 servers.
View 2 Replies
View Related
Jun 2, 2008
I have a dedicated server with a provider. They have a notice period of 30 days, to cancel the server. The billing date of the server is 13th of every month.
I sent them the cancellation form on 30th of last month, asking them to terminate the server by 1st of next month (thereby 30 days notice). But they say that they will bill me on this 13th for another full month, and they'll cancel the server only on 13th of next month! WTF? So, the notice period becomes 43 days!
I have never experienced something like this with other providers I'm using but just wanted to know..
View 4 Replies
View Related
Apr 1, 2008
cheapest dedicated to be used as a remote backup server. This server will be used to backup the fiels of other servers. We need this server to have raid1 or raid5 and at least 1TB of available hard disk space (we want to pay one time fee for the HDs, not monthly).
We've looked into the cheapest (server4you, serverpront) but their cheapest servers can't be customized.
As we are looking for cheapest solutions we are going to have a copy of this backup on another (cheap) DC. So we need 2 cheap places.
View 14 Replies
View Related
Sep 5, 2007
I am running FC2 with cPanel.
My server stopped responding to everything from http to ping and I had to do a hard reboot on it.
Now, I'd like to figure out what happened but am not sure where to start. I've been sifting through /var/log/messages but can't pin point what I'm looking for.
View 6 Replies
View Related
Oct 17, 2013
I know that port 80 is reserved for HTTP communication to clients on the apache server,and that the client can receive the HTTP response to any port on the client machine, I think there might be more details to it than this. I am required to describe how client and server sockets are used for the client/server communication between an Apache Web server and Web client processes.
View 1 Replies
View Related
Apr 17, 2009
I have VPS with CPanel and CentOS but i need to install Red5
can it work and can someone post a step by step tutorial host to install Red5. On Red5 web page is tutorial but when i try to install i get some errors and i have low experience in linux.
View 6 Replies
View Related
Feb 1, 2007
Over the past week, the SMTP server on my VPS has been hanging whenever I try to send an email from my computer. It'll eventually work again, but now it's been down for the count for about 18 hours. Tech support keeps on recommending minor fxes and issuing standard responses like "try disanbling your firewall" and the like, but nothing works. I have already told them this:
* I know _you_ can probably send POP/SMTP mail through my server. I can't.
* Mozilla Thunderbird will connect and send mail through other
POP/SMTP servers.. Not my server here.
* I can connect to _receive_ email, but I can't send it.
* My ISP (SBC/AT&T ADSL) does not block outgoing mail to port 25 on my account; I had the block removed.
* I've got an exim server running on port 26, too. Doesn't make a difference.
* I tried connecting from another ISP (my work PC). Still can't send mail.
* I tried using IP addresses instead of my domain name. Doesn't work.
* I didn't change any account names, passwords or anything like that.
* I tried other email clients. Can't send mail with them, either.
* The exim queue has very few messages in it. Clearing the queue didn't work.
* I disabled firewalls. Didn't help. Besides, I was able to connect
to other mail servers - just not my VPS here.
* There are no typos in any of the account or general configuration settings in my client. Nothing changed. One day I could send mail, now I'm having problems.
I keep saying this, and keep attaching entried from exim_mainlog with error messages like this PROVING that I can't send mail:
2007-02-01 08:26:00 H=adsl*****
[*****]:1294 I=[*****]:25 incomplete transaction
(connection lost) from for
*****@gmail.com
2007-02-01 08:26:00 unexpected disconnection while reading SMTP
command from adsl*****
[*****]:1294 I=[*****]:25
2007-02-01 08:26:17 SMTP connection from [*****]:1344
I=[*****]:25 (TCP/IP connection count = 1)
2007-02-01 08:29:34 H=adsl*****
[*****]:1344 I=[*****]:25 incomplete transaction
(connection lost) from for
*****@gmail.com
2007-02-01 08:29:34 unexpected disconnection while reading SMTP
command from adsl*****
[*****]:1344 I=[*****]:25
Any ideas? I think tech support at my end has given up; it's been hours since I last heard from them, and that was just to say that they updated everything to the current version, and disable the firewall. (Again!) Didn't work.
So, before I pack my bags and find another VPS host, what should I do? Having outgoing SMTP email is a MUST; not having it is a deal-breaker.
View 3 Replies
View Related
Aug 12, 2008
We have a Fasthosts Dedicated Windows Server and I now need to run a PHP script to enable us to use a online enquiry form. I have contact Fasthosts and the are not able to advise how to enable/use these scripts as it falls outside the support package.
Does anyone know how to enable or make it work in the Matrix Control?
The error i get is:
The page cannot be displayed
You have attempted to execute a CGI, ISAPI, or other executable program from a directory that does not allow programs to be executed.
Please try the following:
* Contact the Web site administrator if you believe this directory should allow execute access.
HTTP Error 403.1 - Forbidden: Execute access is denied.
Internet Information Services (IIS)
Technical Information (for support personnel)
* Go to Microsoft Product Support Services and perform a title search for the words HTTP and 403.
* Open IIS Help, which is accessible in IIS Manager (inetmgr), and search for topics titled Configuring ISAPI Extensions, Configuring CGI Applications, Securing Your Site with Web Site Permissions, and About Custom Error Messages.
* In the IIS Software Development Kit (SDK) or at the MSDN Online Library, search for topics titled Developing ISAPI Extensions, ISAPI and CGI, and Debugging ISAPI Extensions and Filters.
View 3 Replies
View Related
May 16, 2007
I have write up a simple shell script from my windows desktop.
After i upload the file via ftp and run it as root, it doesn't run properly.
any file i copy over will end up in "
" ..nothing else.
why is this happening?
Should i write all my code on the server instead?
View 3 Replies
View Related
Nov 1, 2007
I recently changed my small image hosting website to a dedicated server.
My previous server was a cPanel.
Current server is Directadmin.
I've restored the database and files, however I've noticed that the URL upload (Where you input the URL to a image file, and the script grabs the image and reuploads on the server) doesn't seem to work.
Half of the admin panel is distorted and missing half of the options.
View 11 Replies
View Related
Aug 3, 2009
A few weeks back I changed the DNS for my personal website.
With that said, my work runs their own DNS, and for some reason I can only visit my domain name on and off...
For example, I might come into work one day and visit my domain:
[url]
It will work just fine... No connection problems. Then, a few hours later, I try to visit my site again and I get this error:
Quote:
Server not found
Firefox can't find the server at www.example.com.
Then a few/many hours later I can connect again with no problems!!!
Every computer/browser that I have tried in the building gives me this (or similar) error.
This connection problem happens very frequently, and it is on/off throughout the day.
I have narrowed it down to the domain name servers because when I use OpenDNS, I have not problems whatsoever.
Additionally, when I connect to my site from home, I never get this error.
Questions:
1. What do you think the problem is?
2. When approaching the IS dept. with this, what should I tell them is wrong?
View 5 Replies
View Related
May 30, 2009
im using centOS 5 with webmin in my vps.
im installing webmin and do this: [Apache Webserver] / select [Default Server]
and my website work fine ,
but when i check my web site for example
[url]not working!
[url]Work fine!
how i can solve problem
work with www and without www.
View 3 Replies
View Related
May 29, 2009
I'm having exec cgi issues,
CentOS 5.3 x86_64, Linux, Apache/2.0.63,
cPanel 11.24.4-R36167 - WHM 11.24.2 - X 3.9
Error is,
[an error occurred while processing this directive]
If I "uncheck" IncludesNOEXEC in Apache Global Configuration the error disappears, but the SSI doesn't work. If I check it the error is there, but the SSI works.
Here's what I have done so far,
Through WHM,
Main >> Service Configuration >> Apache Configuration,
Pre Main Include, Pre VirtualHost Include, Post VirtualHost Include,
I added,
Options +Includes
AddType text/html .htm
AddType text/html .html
AddOutputFilter INCLUDES .htm
AddOutputFilter INCLUDES .html
Options +ExecCGI
AddHandler cgi-script .cgi .pl
I also added this to the httpd.conf
<Directory "/">
Options +ExecCGI FollowSymLinks Includes IncludesNOEXEC Indexes -MultiViews SymLinksIfOwnerMatch
AllowOverride All
</Directory>
Options +ExecCGI
AddHandler cgi-script .cgi .pl
Then I tried,
Options +ExecCGI
AddHandler cgi-script .cgi .pl
in the .htaccess file
View 0 Replies
View Related
Jan 25, 2007
I got a vps and I dont really understand how ram works but my sites arent really that big yet actually not at all at least teh ones on the vps. I am using directadmin as the panel.
I am using 279mb.
View 4 Replies
View Related
Jan 2, 2007
I installed GD via yum. Yet I cant get it to work I get all kinds of error's like libpng is missing then I got libXpm is missing, then freetype is missing yet all the libs exsist,
View 4 Replies
View Related
Aug 29, 2007
After spending nearly 4 days trying to get ftp working on my server i still haven't achieved it. I got a server with a default install of plesk and cent os 4. I update to 8.2 and when i first go to try ftp it says "server closed connection" on my ftp client.
So then i tried updating 8.2 again and the installer failed. So i tried manually installing both proftpd and pureftpd via ssh and yum and it fails to install. I've also restarted the server a few times. I've tried logging in with every single username/domain/i.p. assigned to the server. and i've had no luck.
View 11 Replies
View Related
Apr 23, 2007
I installed Lighttpd + PHP 5.2.1 with FastCGI
Any php page that starts with <?php is working fine..
but when the page starts with only <?, it does not work
View 6 Replies
View Related
Mar 5, 2007
how does SSH work and really what is it.
This is my knowledge, I may be wrong or right:
There are two ways of controlling your server, through control panel and through SSH, now SSH is where you type in codes to control your server.
Now from what I know you can't login to SSH alot due to security reasons.
I was wondering, if I have a forum can I login to SSH everyday to back up the database?
View 2 Replies
View Related
Apr 2, 2006
Whenever I tried to upload large files to my server it restarts the upload again and again and never actually uploads. It just keeps overwriting the previous file. I don't get any errors? It just automatically reuploads and overwrites the files everytime.
View 2 Replies
View Related
May 28, 2009
My site is under DDOS attack. I run this command
netstat -an | grep :80 | grep ffff | awk '{print $5}' | cut -f 4 -d : | sort | uniq -c | sort -n | tail -10
And find a lot of IP that are attacking. After that, i run
iptables -A INPUT -s xxx -j DROP
to block IP, and
service iptables save
service iptables restart
But when i run netstat command abouve, i found IP are attacking still available, it seem iptables don't block it?
View 5 Replies
View Related
Oct 3, 2009
I would like to know how servers work, like how to build, set up, and how they work, what software is in them? Also could I own a server and send them to a data center and host them there?
Also a little infomation on Data Center. Could you share me some knowlage.
View 13 Replies
View Related
Jul 22, 2009
some clarification with regards to Reverse DNS.
An example ip: xx.xxx.xxx.xx is owned by A Company via a DC. The they have their name allocated to the netname and description when i look up their ip address.
I have my ip xx.xxx.xxx.xx this is me and it currently contains my DC's name throughout when i look it up as the description and netname...
Both are from the same DC however the other company has their name allocated to the ip address and i would like to do the same. Does this require Reverse DNS? It dosent involve domains surely does it?
View 6 Replies
View Related
Jul 9, 2009
I try to install wordpress on my dedicated server but in the begin i get this error:
Your PHP installation appears to be missing the MySQL extension which is required by WordPress
I have centos 5.3 and i have run the command: service mysql start
But i think mysql server is not running, because i have kloxo and from the panel i can see what servers are running.
View 14 Replies
View Related
