I suspect that my machine keep rebooting itself judging it's online for a while with the result of my ping that I can ping my machine for less than 3 minutes and then it goes offline afterward.
I've checked with the datacenter found my IP is clean and fine.
I rebooted the srever
Code:
[root@server50 log]# date
Sun Jul 19 14:48:43 CDT 2009
[root@server50 log]# reboot
Broadcast message from root (pts/1) (Sun Jul 19 14:48:45 2009):
The system is going down for reboot NOW!
[root@server50 log]# uptime
14:49:02 up 47 days, 31 min, 1 user, load average: 0.07, 0.10, 0.09
[root@server50 log]# date
Sun Jul 19 14:58:11 CDT 2009
[root@server50 log]#
But server is not rebooting. Look like server need a hard reboot. Have anyonce faced this problem? why server is not rebooting?
I've had this problem for a while. My HTTP will stop functioning, so I attempt to restart it via SSH. I restart it, yet it doesn't fix the problem. So I reboot the server via SSH. I wait 5-10 minutes and the server STILL isnt up. Can't login via SSH or anything.
So every time I have to tell my host to manually reboot the server. I've had apache recompiled multiple times, but I don't think that's the issue.
I'm hosting proxy sites on my vps and untill yesterday my proxy worked fine with no problems at all.
But while going trough my server graphs I found it odd that I had 0 bandwidth since the middle of yesterday.. I first supposed that this was due school's out [url]but this wasn't the reason I found out!
I tried testing one of my proxies to see if it was still working, but with any URL I try to visit I get:
The requested resource could not be loaded. libcurl returned the error: Couldn't resolve host 'www.google.com'
I suppose the DNS server crashed?
I already restarted the VPS 3 times including the DNS Server.
After rebooting my server, my websites are no longer working.
If I access the plesk machine on the local network by it's hostname, the default Plesk page shows as expected. Everything on 8443 works too.
All hosted sites do not work. FTP DOES work. This seems limited to an http problem of some sort.
I have a vps and I was having memory issues so I reboot my server. Upon doing that it seems to have put itself into a loop and is constantly rebooting itself every 5mins.
I checked the logs at /var/log/messages and found this:
Code:
(?@127.0.0.1) [INFO] Logout.
Jun 29 11:55:49 evercuben xinetd[24525]: EXIT: ftp status=255
pid=24296 duration=0(sec)
Jun 29 11:55:49 evercuben xinetd[24525]: EXIT: smtp status=1 pid=24292
duration=0(sec)
Jun 29 12:00:49 evercuben xinetd[24525]: START: smtp pid=1628 from=127.0.0.1
Jun 29 12:00:49 evercuben xinetd[24525]: START: ftp pid=1630 from=127.0.0.1
Jun 29 12:00:49 evercuben pure-ftpd: (?@127.0.0.1) [INFO] New
connection from 127.0.0.1
Jun 29 12:00:49 evercuben pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Jun 29 12:00:49 evercuben xinetd[24525]: EXIT: ftp status=255 pid=1630
duration=0(sec)
Jun 29 12:00:49 evercuben xinetd[24525]: EXIT: smtp status=1 pid=1628
duration=0(sec)
Jun 29 12:05:49 evercuben xinetd[24525]: START: smtp pid=11347 from=127.0.0.1
Jun 29 12:05:49 evercuben pure-ftpd: (?@127.0.0.1) [INFO] New
connection from 127.0.0.1
Jun 29 12:05:49 evercuben xinetd[24525]: START: ftp pid=11349 from=127.0.0.1
Jun 29 12:05:49 evercuben pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Jun 29 12:05:49 evercuben xinetd[24525]: EXIT: ftp status=255
pid=11349 duration=0(sec)
Jun 29 12:05:51 evercuben xinetd[24525]: EXIT: smtp status=1 pid=11347
duration=2(sec)
Jun 29 12:10:49 evercuben xinetd[24525]: START: smtp pid=20210 from=127.0.0.1
Jun 29 12:10:49 evercuben pure-ftpd: (?@127.0.0.1) [INFO] New
connection from 127.0.0.1
Jun 29 12:10:49 evercuben xinetd[24525]: START: ftp pid=20212 from=127.0.0.1
Jun 29 12:10:49 evercuben pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Jun 29 12:10:49 evercuben xinetd[24525]: EXIT: ftp status=255
pid=20212 duration=0(sec)
Jun 29 12:10:49 evercuben xinetd[24525]: EXIT: smtp status=1 pid=20210
duration=0(sec)
Jun 29 12:15:49 evercuben xinetd[24525]: START: smtp pid=30100 from=127.0.0.1
Jun 29 12:15:49 evercuben pure-ftpd: (?@127.0.0.1) [INFO] New
connection from 127.0.0.1
Jun 29 12:15:49 evercuben xinetd[24525]: START: ftp pid=30102 from=127.0.0.1
Jun 29 12:15:49 evercuben pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Jun 29 12:15:49 evercuben xinetd[24525]: EXIT: ftp status=255
pid=30102 duration=0(sec)
Jun 29 12:15:49 evercuben xinetd[24525]: EXIT: smtp status=1 pid=30100
duration=0(sec)
Jun 29 12:20:49 evercuben xinetd[24525]: START: smtp pid=7525 from=127.0.0.1
Jun 29 12:20:49 evercuben pure-ftpd: (?@127.0.0.1) [INFO] New
connection from 127.0.0.1
Jun 29 12:20:49 evercuben xinetd[24525]: START: ftp pid=7527 from=127.0.0.1
Jun 29 12:20:49 evercuben pure-ftpd: (?@127.0.0.1) [INFO] Logout.
Jun 29 12:20:49 evercuben xinetd[24525]: EXIT: ftp status=255 pid=7527
duration=0(sec)
i'm kinda desperate right now, I have an Ultra Sparc II with Solaris 8 but suddenly it start rebooting again and again by himself, after initialize memmory and starts booting, once the server displays the hostname it says that the server is coming down. and reboot all over again.
View 3 Replies View RelatedI have an Ultra Sparc II with Solaris 8 but suddenly it start rebooting again and again by himself, after initialize memmory and starts booting, once the server displays the hostname it says that the server is coming down. and reboot all over again.
View 0 Replies View RelatedI have a server that is monitored with a system that automatically reboots if a service appears to be down. The server is being rebooted several times a month and it seems to be getting more frequent.
The server load is almost never high. It's a dual Xeon with hyperthreading and the load is almost always below 1. Practically the only time it goes high is during cPanel backup and it hardly ever reboots during that.
The DC tried replacing the RAM, but a day and a half later it rebooted again.
The server has 1 fairly active MySQL message board and 3 fairly high bandwidth sites (images and video clips), and the rest of the sites are quite small and inactive. One thing the tech said was "Apache gets a lot of traffic so I'm not surprised to see an apache restart once a month or so. You have 115 concurrent connections to apache and over 25,000 hits in the last 2 hours alone" but I've gotten reboots a few times/week.
I have compiled a RT kernel using 2.6.24 and it has been working great. All of our machines are runnin Centos 5. No issues like the previous configurations on Dual Quad Xeons 5335's and 8GB of RAM. As well as one box with Dual Core Xeon 5140's with 4GB of RAM. They have identical motherboards. My issue is that when you do a soft reboot, it doesn't "technically" reboot. It does, but it doesn't. Let me explain. It kills my ssh connection and you can't ping it for maybe say a minute or 2. When it comes back up, you get a new SSH key to login. You hit ok, and you try logging in. It doesn't accept any passwords. The server basically becomes inoperable.
The only way to solve this is to do a hard reboot. Phsyically rebooting the server.
What could be causing this? This only started to happened when using the RT kernel. Is there an option that may be conflicting with it, however our 3rd and 4th box, with the same configuration has no issues like this. Soft reboots work great.
Here is the message log.
Feb 19 04:00:02 server530 shutdown[25342]: shutting down for system reboot
Feb 19 04:00:02 server530 init: Switching to runlevel: 6
Feb 19 04:00:03 server530 smartd[3037]: smartd received signal 15: Terminated
Feb 19 04:00:03 server530 smartd[3037]: smartd is exiting (exit status 0)
Feb 19 04:00:09 server530 ntpd[20917]: ntpd exiting on signal 15
Feb 19 04:00:09 server530 rpc.statd[2570]: Caught signal 15, un-registering and exiting.
Feb 19 04:00:09 server530 portmap[25711]: connect from 127.0.0.1 to unset(status): request from unprivileged port
Feb 19 04:00:10 server530 auditd[2469]: The audit daemon is exiting.
Feb 19 04:00:10 server530 kernel: audit(1203415210.158:8204): audit_pid=0 old=2469 by auid=4294967295
Feb 19 04:00:10 server530 pcscd: pcscdaemon.c:529ignal_trap() Preparing for suicide
Feb 19 04:00:10 server530 pcscd: hotplug_libusb.c:361:HPEstablishUSBNotifications() Hotplug stopped
Feb 19 04:00:11 server530 pcscd: readerfactory.c:1350:RFCleanupReaders() entering cleaning function
Feb 19 04:00:11 server530 pcscd: pcscdaemon.c:489:at_exit() cleaning /var/run
Feb 19 04:00:11 server530 kernel: Kernel logging (proc) stopped.
Feb 19 04:00:11 server530 kernel: Kernel log daemon terminating.
Feb 19 04:00:12 server530 exiting on signal 15
Oh and this is to reboot the server nightly at 4am, when this issue occurs.
0 4 * * * /usr/bin/reboot > /dev/null 2>&1
my server has two NICs with eth0 and eth1,
i use the eth0 for the default connection,
i want to ask after rebooting,
how can i let the eth0 work automatically,but eth1 will not work auto,
if need,i can ifup eth1 manually.
I have been trying to change an IP address on a customers Linux(RH9) server and I am getting errors, Can some on point/push me in the correct direction.
I am editing /etc/sysconfig/network-scripts/ifcfg-eth0 and am getting this message,
"1. Quit editing this file, because another edit session is active on this file.Continuing to edit will result in two versions of the same file. The one that is written last will overwrite the other one, resulting in loss of changes. The text "ifcfg-eth0" indicates that the process
editing this file runs on the same computer. When working over a network you will not see this message, because the process will be running on another computer.
2. Recover a previously crashed edit session."
This is a stand alone server and noone else uses this server.
I have tried to use the vim rercover command but no luck.
I am more use to using pico than vi, but pico is not installed.
Are there any special practices to reboot a node in PPA?
So far a simple "shutdown -r now" hasn't broken anything but I want to make sure PPA doesn't make assumptions about the nodes being up at any point. (both management and service)...
I've got a VPS which is serving as the main server for a number of sites. Web Server, SSH Server, and Mail Server.
What I've got running:
Apache2, PHP5, MySQL5, Dovecot, Postfix
One of the sites is a growing forum with a MASSIVE photo album. This is the site where I notice the most slowness.
Changing the server software is not an option - Only optimization.
Quote:
Originally Posted by httpd.conf
ServerTokens OS
ServerRoot "/etc/httpd"
PidFile run/httpd.pid
Timeout 300
KeepAlive Off
MaxKeepAliveRequests 100
KeepAliveTimeout 5
<IfModule prefork.c>
StartServers 8
MinSpareServers 8
MaxSpareServers 13
ServerLimit 256
MaxClients 256
MaxRequestsPerChild 50
</IfModule>
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
Listen 80
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_alias_module modules/mod_authn_alias.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule expires_module modules/mod_expires.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule info_module modules/mod_info.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule cache_module modules/mod_cache.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule cgi_module modules/mod_cgi.so
Include conf.d/*.conf
User apache
Group apache
Quote:
Originally Posted by my.cnf
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
# Default to using old password format for compatibility with mysql 3.x
# clients (those using the mysqlclient10 compatibility package).
old_passwords=1
[mysql.server]
user=mysql
basedir=/var/lib
[mysqld_safe]
log-error=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid
I looked a lot - can not find solution ....
I want to transfer a file from [url]to [url]or [url]Without it will pass my localcomputer (slow upload)
It can be also a script i will install like this one - this is only for images
[url](remote)
I have Plesk 11.5 (service provider mode) on a Windows 2008 server IIS7.Most of my sites are developed in .asp and therefore i use a custom 500-100.asp error page that check s the IP of the visitor then displays either a friendly error, or if its my IP a full error of what has happened (it also emails me the error). This allows me to debug pages easily whilst developing and to keep an eye on anyone trying SQL Injection hacks on my sites (as the error and email also have session variables and IP address).I dont have root access to the server as it is a Webfusion dedicated server.I have following the Plesk documentation -
1) Switch on custom errors for the subscription
2) Look in virtual directories and navigate to error documents
3) Find the error in question (500:100) and change it to point at either a file or URL
FILE - I had the data centre add in the 500-100.asp error page in to the virtual template so that my page is available in the list of virtual files - this didn't work but that maybe because its not a static page??
URL - when i add the path it says its incorrect, if i add a fully qualified address, it accepts it but it doesn't work.give me a specific example of the URL that can be entered relative to the root as the format in the documentation isn't accepted. The last step is to restart IIS which is also an issue as i cant seem to do this from the Plesk panel..It is as if it isn't catching the 500:100 error, and only catching the general 500 error??
I am currently running Google Analytics/Urchin 5 (v5.7.02), on a server, the server has started to act up, (on its last legs etc) and now I am trying to transfer the Urchin Software to a new server, where it would work effectively.
However upon installing the urchin software on the new server and running it (localhost:9999), I am presented with An Action Items Page, and these following choices
Obtain Demo License
Buy License
Activate Pre-Purchased License
I choose ‘Activate Pre-Purchased License’ pop in the Serial number and complete the registration then…
---------------------------------------------------------
Urchin Licensing Center -- Error!
An error has occured during your transaction, please use the back button and correct the problem. The specific error message is:
• Unable to generate a license. Some possible reasons:
Your serial code is currently active <<< How do I disable it and use it on another server?
---------------------------------------------------------
So all I want to do is deactivate the serial and reactivate it on another server.
Does anyone have experience with this or a similar problem or have a solution to this problem. Any help be most appriciated.
Or even a Contact Number so that i can get some one over the phone!
This is the scenario, domain.com are setup on server1, however server2 also has the same profile of domain.com as we use ns3 and ns4 using domain.com. This works fine with the nameserver setup on server2.
However I encounter problems as the emails from server2 won't reach server1 as there are duplicate profile on server2.
My question is how do I setup the DNS in cpanel/whm from server2 so the emails from server2 will reach server1?
Server1 (www.domain.com)
ns1.domain.com
ns2.domain.com
Server2
ns3.domain.com
ns4.domain.com
I just want to use a server for file sharing, it will have nginx and that's it. I'm looking at centos, or freebsd, but I been using centos forever now and I'm not sure how to use freebsd, should I just stay with centos?
Do I tell my hosting provider to just install the OS and give me ssh action and that's it? Don't install any control panels or any other stuff? I want one domain and one subdomain on it though and ftp action.
Remote Spamassassin for Multiple Smartermail Server
I want to setup Remote Spamassassin(On Linux) for Multiple Smartermail servers. I want to the setup the spamassassin on a linux box
How i can setup this with multiple smartermail servers.
what is the fast and best way?
View 4 Replies View RelatedI'm wondering whether it is possible to perform a full server migration to a new Plesk server with the same hostname or will Plesk give an error about the hostname being the same?
The new server would not be accessible by hostname (only via IP) until DNS and glue records were changed after the migration.
I've been developing a small 2D MMORPG lately. I bought a VPS to run the server on a few days ago and sadly it doesn't work so well. Sometimes the loads go pretty high (afaik not caused by me) and MySQL freezes, causing the server to just wait for MySQL to unlock, hanging all the players around on the map. Not a good thing.
Anyway, the game is very small scale, and I'm not planning to have more than maybe 30-50 players online. It does not suck up much CPU, I had ~10 guys online and loads stayed down at 0.00 on the VPS box.
Problem with getting a dedicated is our very low budget. As I'm still underage and living at home hammering my pc and don't have any real incomes, we're talking numbers like $ 30 - $ 50 USD per month - it's really hard to find for that price in Europe.
Requirements:
Monthly payment, $ 30 - $ 50 / month, no setup (or very small setup, like $ 20)
10Mbit/s or faster connection, 100GB traffic should do
500MHz CPU is all cool
512MB or more RAM
5GB diskspace is enough
Has to be in Europe due to ping times (< 100ms)
Linux, Debian 4.0 prefered
If anyone knows where I could get something like this for a low price, $ 30 to $ 50 USD, it'd be great.
I have been searching everywhere trying to find a tutorial but It is not going anywhere. Basically I need to create 2 nameservers for Godaddy and pretty much so when i type http://mysite.com it goes to my site. I can access everything from http://myip and everything works. Now is there a step by step on how to actually do it in the DNS Manager? I need help like what IP address do I use is it the router ip? The external IP?
View 7 Replies View Relatedi want to shift my domain to one server to another server and the problem is how can i shift my email accounts data to one server to another server.
View 8 Replies View RelatedSite is currently running on a single code single cpu p4 server. Am thinking of upgrading to a quad core Xeon server.
My site is pretty dynamic with lots of hits to php / mysql, and has trouble keeping up with the requests sometimes. Would a quadcore Xeon significantly help?
Server Software:
Windows 2003 Server
php 5.2.6
apache 2
mysql 4.1
Current Setup:
P4 2.8 single core/cpu.
Proposed setup
Xeon 3210 quadcore
I guess my confusion lies in the following:
1. Can win2003 server make use of the quadcores?
2. Does php / apache / mysql make use of the quadcores?
3. Will i see a significant increase in the amount of pages i can serve?