spec are:
Intel . 2,4 GHz
80 GB of HDD disk
1GB MB of RAM
Traffic-Unlimited
100Mbit Switch Port
Windows web os
from hosting-ie yes i know the bad reviews but i got my server in 2days
now i saw a good deal that for 12 euros extra get 2 * 100mbit
so i upgraded to a 2 * 100mbit connection as the server would be
used to let members from my forum download music / music videos [remixed] made by me and my other producer so 200mbit server will do nicely for my site
now when i got it it shows me two network connections each saying 100mbit
but only one of the connections is being used and the other is not in use
is there a way that i can use both at the same time or maybe use one for http/ftp and one just for ther server itslef
I have a SSL certificate for my website. I add the certificate to plesk and now I want use the certificate for diffrent ports.If I run only apache without plesk I need to add the ports to the apache conf where it listening too.At the moment apache listen only on port 844. But I want add 8443 too, how I do it in plesk?
why mrtg screws graphs up if bandwidth usage goes over 120 mbit/sec? See an attachment. First graph from mrtg, second one provider's graph which is correct. In mrtg.cfg I got MaxBytes[_]: 2250000000
Do SMTP servers by default use port 25 for receiving mail from another SMTP server? Are there any other receiving ports an SMTP server would be listening on by default?
My question is, a server I will be setting up is going to be behind a firewall that blocks outgoing connections *to* port 25. Is there going to be any way around this that is workable besides opening the port?
Our new data center provided us with a Cisco ASA5510 firewall. We're setting up all new servers and will begin migrating all of our domains from our current co-lo to the new place.
At the old co-lo, they provided us a very basic BSD based router, and our servers all had external public facing IPs on them. Firewalling was handled at the server (Windows Firewall or Linux IPtables).
The new place is NAT'ing us, so our servers all have a 192.168.10.x address inside, and they map the external address for us through to the inside.
By default, they are locking everything down. I had to ask them to open ssh so I could remote into my CentOS box last night.
I'm not a network guru-- what ports are going to NEED to be opened so I can give them a list? This is a standard PLESK hosting server so http (80), https, ssh, ftp, pop3, smtp, what else? Anyone have a list?
I don't know why I typed SMTP in the title. I meant just the mail server. I just posted a message saying that my VPS is down due to FDCServers being down as they supply my host.
I can live with a 24 hr blackout on my site (however definitely not happy about it).
What I can't live with is having my mail.mydomain.com server being down at all. I run my VPS and host a few sites from it including a few clients. I need to make sure that my email doesn't go down when my VPS goes down.
How can I go about this? If I purchase a second VPS plan can I have that run just my email server for me? If so, how much in resources do I need? Will a cheap plan do the trick (ie. 64mb Ram or something)?
my current dedi server and want to configure shoutcast for the server. I have install the shoutcast located in /usr/local/shoutcast.
Just curious one of my customer would like to use the shoutcast so how can i create a user for them? should i install manually for each of my customer that want to host shoutcast?
I got dedicated server with Windows Server 2k3 OS and have not configured it yet. I've installed Serv-U and Apache 2 (PHP, MySQL will be the next step). But I can't open my Website from home (from server there is no problems). And I can't get into my FTP server either. I scanned ports from home to figure that out. 21 for FTP is seen. 80 http is not seen. However on the server I did "netstat -an" and it showed the port 80 listening. So why can't I reach my FTP server and open my site? Is the problem in Windows Server 2k3 configuration?
I have a magento based ecommerce website. In have to integrate a payment method which requires a certificated delivered from a specific certification authority not recognized by browsers. Then I have to use 2 diffrent certificates, one for the payment and the other for the remaining secure operations. Is it configurable in apache?
My server provider is moving my server to a new data center, I am going to keep my data on it.But I am going to be assigned two new IP's.I have a Centos server with WHM and CPanel.
tell me exacly on which file on my server i need to configure my two new IP's, is changing them on WHM enough? Do I have to edit the DNS zone for each domain?.
I am setup in a co-location facility. I just recieved my new SonicWall TZ180 which I am trying to setup.
Previously I had my server connected to the internet drop via a static ip address assigned via windows tcp/ip (1.1.1.2), nothing special there. Then I used Plesk and assign domains and ip addresses as normal.
My co-location facility gives me 4 static ip addresses, lets call them:
1.1.1.2 1.1.1.3 1.1.1.4 1.1.1.5
And an ip address called Network Gateway at:
1.1.1.1
And DNS ips at:
2.2.2.2 2.2.2.3
I am trying to figure out how I make this work now with the SonicWall. I am using Plesk, and I have already assigned all DNS settings and name servers to their proper static IP address, such as:
So I cannot use the local ip address (192.168.168.2) assigned to the server box by default by SonicWall using DHCP. I must use the actual static ip addresses assigned to me and already configured in Plesk. I have heard I need to use NAT, and assign the SonicWall the ip address of the network gateway: 1.1.1.1, then add the 4 standard static ip addresses into a pool in the sonic wall.
What configurations are needed on a whm/cpanel vps hosting account in order to be used as a mail server for a domain being hosted on another server? The domain's mx entry have already been altered to point to the target mail server.
I am trying to abolish FTP from my VPS, but refuse to allow SFTP with SSH access (and even give the secret port # out for SSH). It seems RSSH fits the bill, but I need to install it on a cPanel server. I want to know the following:How do I install RSSH on a server running cPanel
How do I make RSSH a shell I can enable via WHM as a default for ll new accounts without cPanel breaking it during an pdate
I have a class project that we are working on where we have to configure and implement an Apache server with ssl using ldap for authentication. I have documentation of literally everything I have done in the configuration. Everything seems to be fine with the config that I can tell. The client gets a prompt for username and password when they access the server ip address. However, once the correct username and password are entered, then the client receives a 500 internal server error message instead of the webpage: "Internal Server Error...The server encountered an internal error or misconfiguration and was unable to complete your request.
I'm trying to configure a host to use vhosts but the server keeps breaking when I uncomment the Include vhosts file line. The apache process starts but none of the hostnames work. When the line is commented out, only the main hostname (defined in httpd.conf) works.
