How To Configure Mrtg On Cpanel Server
Jun 22, 2008I've just installed MRTG using WHM > Install a RPM mrtg.i386
how do I configure the installation and get my mrtg to work & to view my mrtg?
I've just installed MRTG using WHM > Install a RPM mrtg.i386
how do I configure the installation and get my mrtg to work & to view my mrtg?
How to install mrtg on a cpanel server?
I followed the tutorial on [url]but it didn't work
I am trying to abolish FTP from my VPS, but refuse to allow SFTP with SSH access (and even give the secret port # out for SSH). It seems RSSH fits the bill, but I need to install it on a cPanel server. I want to know the following:How do I install RSSH on a server running cPanel
How do I make RSSH a shell I can enable via WHM as a default for ll new accounts without cPanel breaking it during an pdate
Can I run RSSH on a seperate port then SSH?
how to install MRTG on a non cpanel server. It is running CentOS 4.5
I plan to run LayeredPanel on it.
Also, is it really CPU intensive?
I tried installing MRTG in my Linux Server by using help from -
[url]
What i have done till now is -
cd /usr/local/src
gunzip -c mrtg-2.16.2.tar.gz | tar xvf -
cd mrtg-2.16.2
./configure --prefix=/usr/local/mrtg-2
make
make install
After this i am unable to understand what to do, and how to start MRTG graphs.
* the next last step says,
CONFIGURATION
The next step is to configure mrtg for monitoring a network device. This is done by creating an mrtg.cfg file which defines what you want to monitor. Luckily, you don't have to dive straight in and start writing your own configuration file all by yourself. Together with mrtg you also got a copy of cfgmaker. This is a script you can point at a router of your choice; it will create a mrtg configuration file for you. You can find the script in the bin subdirectory.
cfgmaker --global 'WorkDir: /home/httpd/mrtg'
--global 'Options[_]: bits,growright'
--output /home/mrtg/cfg/mrtg.cfg
community@router.abc.xyz
This example above will create an mrtg config file in /home/mrtg/cfg assuming this is a directory visible on your webserver. You can read all about cfgmaker in cfgmaker. One area you might want to look at is the possibility of using --ifref=ip to prevent interface renumbering troubles from catching you.
^^ this is what i am not able to understand.
When i ran the script, (below mention) it gave many errors, how to resolve them ?
[root@c bin]# ./cfgmaker --global 'WorkDir: /home/httpd/mrtg' --global 'Options[_]: bits,growright' output /home/mrtg/cfg/mrtg.cfg eth0
Error:
can't resolve "output" to IP address
at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 428
SNMPWALK Problem for public@output::::::v4only
at ./cfgmaker line 950
WARNING: Skipping public@output: as no info could be retrieved
Error:
can't resolve "/home/mrtg/cfg/mrtg.cfg" to IP address
at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 428
SNMPWALK Problem for public@/home/mrtg/cfg/mrtg.cfg::::::v4only
at ./cfgmaker line 950
WARNING: Skipping public@/home/mrtg/cfg/mrtg.cfg: as no info could be retrieved
Error:
can't resolve "eth0" to IP address
at /usr/local/mrtg-2/bin/../lib/mrtg2/SNMP_util.pm line 428
SNMPWALK Problem for public@eth0::::::v4only
at ./cfgmaker line 950
WARNING: Skipping public@eth0: as no info could be retrieved
# Created by
# ./cfgmaker --global "WorkDir: /home/httpd/mrtg" --global "Options[_]: bits,growright" output /home/mrtg/cfg/mrtg.cfg eth0
### Global Config Options
# for UNIX
# WorkDir: /home/http/mrtg
# or for NT
# WorkDir: c:mrtgdata
### Global Defaults
# to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits
EnableIPv6: no
WorkDir: /home/httpd/mrtg
Options[_]: bits,growright
I want to configure ad-supported web hosting same as Godaddy is giving free web hosting with every domain.I want to automatically set a permanent banner ad on customers every web page when a new account is created.
Platform Linux Cpanel whm
im using Vmware
i want install centOS ( vps ), Im try to install text mod , before start install centOS ( Blue Screen ) ask about install some package ! like,
Editors, Text Based Internet, Server Configuration Tools....
i want know for web server ! which package must checked ?
How to configure SMTP on different server?
I don't know why I typed SMTP in the title. I meant just the mail server.
I just posted a message saying that my VPS is down due to FDCServers being down as they supply my host.
I can live with a 24 hr blackout on my site (however definitely not happy about it).
What I can't live with is having my mail.mydomain.com server being down at all. I run my VPS and host a few sites from it including a few clients. I need to make sure that my email doesn't go down when my VPS goes down.
How can I go about this? If I purchase a second VPS plan can I have that run just my email server for me? If so, how much in resources do I need? Will a cheap plan do the trick (ie. 64mb Ram or something)?
I have 2 domains as follows:
Domain1 on Server 1 = www.domain1.com
Domain2 on Server 2 = www.domain2.com (has a forum)
How can I configure subdomain.domain1.com, but to be on Server 2?
The idea of this exercise is to feel the visitors when they browse the forum that they are on same website/server.
my current dedi server and want to configure shoutcast for the server. I have install the shoutcast located in /usr/local/shoutcast.
Just curious one of my customer would like to use the shoutcast so how can i create a user for them? should i install manually for each of my customer that want to host shoutcast?
I got dedicated server with Windows Server 2k3 OS and have not configured it yet. I've installed Serv-U and Apache 2 (PHP, MySQL will be the next step). But I can't open my Website from home (from server there is no problems). And I can't get into my FTP server either. I scanned ports from home to figure that out. 21 for FTP is seen. 80 http is not seen. However on the server I did "netstat -an" and it showed the port 80 listening. So why can't I reach my FTP server and open my site? Is the problem in Windows Server 2k3 configuration?
View 5 Replies View Relatedi got a new server
spec are:
Intel . 2,4 GHz
80 GB of HDD disk
1GB MB of RAM
Traffic-Unlimited
100Mbit Switch Port
Windows web os
from hosting-ie yes i know the bad reviews but i got my server in 2days
now i saw a good deal that for 12 euros extra get 2 * 100mbit
so i upgraded to a 2 * 100mbit connection as the server would be
used to let members from my forum download music / music videos [remixed] made by me and my other producer so 200mbit server will do nicely for my site
now when i got it it shows me two network connections each saying 100mbit
but only one of the connections is being used and the other is not in use
is there a way that i can use both at the same time or maybe use one for http/ftp and one just for ther server itslef
How to install and configure memcached in LAMP server through easyapache or any other method.(cpanel installed server)
View 5 Replies View RelatedI have an unmanaged Windows VPS and I want to host multiple sites (with different domains).
I was told that I should create my own private nameservers in order to do so.
I have allready installed DNS Server in the VPS but I cannot find a tutorial to help me configure the private nameservers.
The OS is Windows Server 2003. Please provide any good tutorials if you know.
I searched in Google but couldn't find any...
I have a magento based ecommerce website. In have to integrate a payment method which requires a certificated delivered from a specific certification authority not recognized by browsers. Then I have to use 2 diffrent certificates, one for the payment and the other for the remaining secure operations. Is it configurable in apache?
View 6 Replies View RelatedMy server provider is moving my server to a new data center, I am going to keep my data on it.But I am going to be assigned two new IP's.I have a Centos server with WHM and CPanel.
tell me exacly on which file on my server i need to configure my two new IP's, is changing them on WHM enough? Do I have to edit the DNS zone for each domain?.
I am setup in a co-location facility. I just recieved my new SonicWall TZ180 which I am trying to setup.
Previously I had my server connected to the internet drop via a static ip address assigned via windows tcp/ip (1.1.1.2), nothing special there. Then I used Plesk and assign domains and ip addresses as normal.
My co-location facility gives me 4 static ip addresses, lets call them:
1.1.1.2
1.1.1.3
1.1.1.4
1.1.1.5
And an ip address called Network Gateway at:
1.1.1.1
And DNS ips at:
2.2.2.2
2.2.2.3
I am trying to figure out how I make this work now with the SonicWall. I am using Plesk, and I have already assigned all DNS settings and name servers to their proper static IP address, such as:
ns.mydomain.com -> 1.1.1.2
ns.myseconddomain.com -> 1.1.1.3
So I cannot use the local ip address (192.168.168.2) assigned to the server box by default by SonicWall using DHCP. I must use the actual static ip addresses assigned to me and already configured in Plesk. I have heard I need to use NAT, and assign the SonicWall the ip address of the network gateway: 1.1.1.1, then add the 4 standard static ip addresses into a pool in the sonic wall.
What configurations are needed on a whm/cpanel vps hosting account in order to be used as a mail server for a domain being hosted on another server? The domain's mx entry have already been altered to point to the target mail server.
View 1 Replies View Related