My server (Fedora Core V and Plesk 8) hard disk broke 2 days ago and my bakckup tar.gz is too old.
Datacenter (fdcservers.net) tried to put old harddisk as slave but server is not recognising the old drive. Datacenter say that can not do anything more.
My question:
Is there any software or company that can recovery my harddisk data?
My last 6 months work is gone now.
We've a hard drive corrupted.
So we can't even access as a mount point putting it as secondary hdd.
So I'm looking good data recovery services based on US, nearest as possible from Layeredtech, so I can send that disk for recovery.
My windows server's hard disk was crashed & now I have mounted it as secondary hard disk on the server .
Now I want to restore the data to new server .
My host just recently sent the hard drive with my sites to a data recovery company called Gillware. Website is [url]- but they failed and gave the following reason:
Quote:
Originally Posted by Gillware
Unfortunately, your file system was so severely damaged that no data can be
recovered. We will make arrangements to return your drive via UPS. Sorry
we could not help you further.
Gillware Inc.
Do you guys think there's still hope?
The hard drive is now being shipped to a more well known company, Drive Savers - [url]and I'm guessing that this is the last hope, because the more the drive gets tampered with, the more chance of permanent data loss.
So yeah.. I was just wondering what you think? If the file system is so severely damaged, do you think it STILL can be recovered?
I have my backup disks here because my server got hacked and we didn't like how liquidweb made the things. So we ask them to ship us the disk. They ran photorec and they got lots of .gz files from it. All accounts I would say. But 50% of them the .tar.gz files came corrupt. And is lefting all the big accounts and until now I haven't seen any corrupted file that came with MySQL. And I think MySQL is most important to all clients.
View 5 Replies View RelatedMy server has a small SAS disk(about 73G), if I use 90% diskspace of it, is it good idea, will it harm the physical HDD?
View 6 Replies View RelatedI have 100+ sites on this hard drive, and one site in particular that meant the world to me.
My host sent the drive to Gillware first, but they failed saying that the file system was so severely damaged that they could not recover anything.
Then shortly after, my host sent it to DriveSavers, a very well-known company, but they also FAILED.
I'm extremely depressed because of this. Please don't post if you're going to say "make sure you do backups next time" because I've heard it 504329504395 times now, and while I do realize my mistake, saying that does NOT help me.
I am willing to spend ALOT to get my sites back. I still have hope. Are there any other companies out there BETTER than DriveSavers? Assuming that you'd still have hope even after two companies failed, where you would you go or what would you do?
who you have used in the past to recover damanged hard drives that have been dropped. I got a client that damanged his HD, and it needs to be sent out to someone who is reliable is not gonna cheat and steal the data.
View 4 Replies View Relatedif someone have for mistake cancelled a cpanel account and in the same dir was the backup file of this account, should be possible to recovery at least the backup file from the deleted files? Or the entire dir cancelled?
View 1 Replies View Relatedhow can i check how much hardisk i have with ssh/directadmin?
View 10 Replies View RelatedI currently have a 160gb HDD and its almost full.. I wanted to mount another on the server so can anyone assist me in doing it..
And one more thing..
Currently i have all my data in the /home/user/public_html/ folder which is on my current HD.. Now if i add the second HDD to it how will the data be managed..
I mean if suppose someone uploads a file in my site then in which HDD will it go and when it gets downloaded then how will it know from where to download it..
It looks like the hard disk in my server is very problematic and that's the source of all my suffering all these months.
Anyone know how to ghost the content of my hard disk? Also where should I store the "image"?
Does anyone know whether if its possible to recover data on FreeBSD server?
View 10 Replies View Relatedif its possible to recovred deleted data on Freebsd based systems?
Forum search didnt returned similar topics,anyone?
to recover a back-up from my server which i deleted yesterday. is there any linux utility/script or whatever which can restore data?
I'm running centos 4.3 64-bit SMP
Harddisks: 6 X 18.2 GB U160 scsi disks, 15k rpm
2 disks in raid 1, on channel 0 to the raid controller (OS and software)
4 disks in raid 5, on channel 1 to the raid controller (web files, php, html, images etc. and all databases. )
Volumegroup 1
logical volume 1 = 14 GB for the OS
Logical volume 2 = 4 GB for the swap file
Volume group 2
Logical volume 1 = 20 GB, mounted to /var for the databases and other var stuff
Logical volume 2 = 30 GB, mounted to /home for all webfiles etc.
The backup was located on VG2, LV2 = /home , and i removed it by using the rm -rf command.
I know the exact filename etc.
When I check hard disk usage I get the following:
Quote:
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 9.7G 8.4G 905M 91% /
/dev/sda5 215G 415M 204G 1% /var
/dev/sda1 99M 16M 78M 17% /boot
tmpfs 2.0G 0 2.0G 0% /dev/shm
/dev/sdb1 227G 188M 215G 1% /disk1
sda2 is 91% used.. I am not sure what is it filled with. How can I know what is exactly on that partition?
I face a problem in a server:
Hard disk DARPA bakup
I deleted backup site of almost 5 days
Now I want these bakup
Is there a method of retrieval?
I wish if there was any way to recover the files deleted from the hard disk
Wish benefit
I am running a dating website and getting more and more users with every day. They can upload from 10 till 100 pictures depending of their account satatus. Server's hard disk will be full in some 5-6 months. I can not attach unlimited amount of hard disks to the same machine. What can I do in this situation?
View 11 Replies View Relatedtrying to get my Win2k3 Standard R2 server to work.
Problem:
I did some Windows update around 3am this morning but during the update process. I lost Remote desktop connection as my machine is do several attempts to connect with the remote server. I cancel the attempt after several try. I figure i can remote desktop back in again if i wait for a bit but I couldn't re-establish the connection with my remote server. So, I drove to the Datacenter to check it out and it turn out the machine have rebooted and I'm stuck with "NTDetect failed" error message. After some googling, I was trying to fix this error by copying NTLDR and NTDetect.COM into C: but when i tried to use the Win2k3 CD to go into Windows Setup and repair. I got an error message telling me that "Setup did not find any hard disk drives installed in your computer...".
After some googling, I found the two Maxtor SATA hard disks might be the problem and one soultion that i found was to disable the SATA or set it to IDE since the motherboard have nvida RAID controller onboard. I check the BIOS and the RAID is set to disabled and then i tried to disable SATA and only enable IDE. It still give me the same error message about not able to find any hard disk.
I'm on my last rope here. I'm short of reformatting the hard disk and do a fresh reinstall but I will like to avoid this.
Does anyone know if cancel Remote desktop connection attempt during Windows update process cause this NTdetect failed problem or something else that might related to my hardware. I can assure you that two SATA hard disks shown on BIOS.
The soultion to NTDecte failed problem seem to be just copying NTLDR and NTdectect.com into C: but since i can't even get to Repair mode during Windows setup with no disk install error. Can someone recommand how to solve this problem?
The motherboard that i use is ASUS M2N-MX SE AM2 NVIDIA GeForce6100 / nForce430 and the BIOS is American Megatrends Inc.
My server hard disk is crashed badly. The rescue function in the server cannot take part and so I've tried using some recovery software to get back my data.
I've tried using Easy Recovery Professional. It sort all the files by it file type into different folder. I found a folder named .DB, there are also some .ado and . ldb folder too. I guess one of it is my database. The problem now is, i dunno how to read the file.
Do you have any idea to read it? I've tried many recovery system. eg. DiskInternals Linux Recovery, Disk Doctor Linux Recovery.
it is a linux server
I have a server with two hard disks.
The centos operating system and plesk (and also apache webserver) are installed on the first hard disk.
I have mounted the second hard disk (6 TB with ext4 file system) in a folder under /var/www/vhosts/AHostingAccount directory.
This folder is accessible via plesk's file manager but i cannot access it via ftp.
Is any way to change hard disk memory limit for created subscription ? It is 4 Gb I have to increase it to 8 Gb.
View 1 Replies View RelatedI have a new CentOS 7, with Plesk 12, CentOS 7 by default has XFS filesystem.
I try migrate sites from another Plesk Server but Plesk agent say: "hard disk quota is not supported due to configuration of server file system" (my CentOS 7)
My CentOS7:
CentOS Linux 7.0.1406 64 bits
Plesk 12.0.36
My fstab
[root@ns ~]$ cat /etc/fstab
/dev/mapper/centos-root / xfs defaults,usrquota,grpquota 1 1
UUID=ba391bd5-786c-4ae7-8bbd-f36f831ae6eb /boot xfs defaults 1 2
/dev/mapper/centos-swap swap swap defaults 0 0
I added "usrquota,grpquota", then mount -o remount / ; but when I try quotacheck -fmv / I gest this:
[root@ns ~]$ quotacheck -fmv /
quotacheck: Skipping /dev/mapper/centos-root [/]
quotacheck: Cannot find filesystem to check or filesystem not mounted with quota option.
but quotaon command works:
[root@ns ~]$ quotaon /
quotaon: Enforcing group quota already on /dev/mapper/centos-root
quotaon: Enforcing user quota already on /dev/mapper/centos-root
The problem here is why Plesk does not recognize quotas as enabled on CentOS 7??
If I try this command it seems good:
[root@ns ~]$ /usr/local/psa/admin/sbin/usermng --isquotable
0
Also I do this:
- Disabled Selinux
- Check all packages as quota, etc.
I have been using some reference: [URL] ....
I have a server with 2 hard drives, say drive A and drive B. Right now all my files, database and data is on drive A, and drive B is empty. Since I have another drive available, I want to split the load between the two drives. I'm ok with having the web pages and the database on one drive. I mostly want to just have the data (I have about 500GB of data) split between the two drives. Note that I want to avoid duplicating the data. I want to have each file on either drive A XOR drive B.
Should I map a separate subdomain to drive B and then use that subdomain to serve the half of the data thats there? Is there something I can do with hard/soft links on the server so that even though the data is on 2 drives, users still use the same url to access data on either drive? Any other options?
Does anyone knows any software or way to recover lost data from hard disk?
View 7 Replies View RelatedI just recently had a hard drive failure that produced the following error
root@re:/# mount /dev/hda3 /mnt
mount: wrong fs type, bad option, bad superblock on /dev/hda3,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
ide: failed opcode was: unknown
end_request: I/O error, dev hda, sector 4410069
Buffer I/O error on device hda3, logical block 8259
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
ide: failed opcode was: 0xb0
The host is going to mount this HD on the same machine after adding a new hard drive and fresh install... Does anyone have any recommendations for how I can go about recovering data? Specifically mysql databases?
Quote:
Today we are going to conduct a detailed study of RAIDability of contemporary 400GB hard drives on a new level. We will take two "professional" drives from Seagate and Western Digital and four ordinary "desktop" drives for our investigation. The detailed performance analysis and some useful hints on building RAID arrays are in our new detailed article.
[url]
I've got a problem with one of my servers, and i dont now how to do it. I need to find a technical service that I could hire for a job.
It's a small job. I've got one server that was compromised by D.O.S. atack and taken down by hosting company they did a clean instal fedora and cpanel and said that the data would be mounted on a old drive I need to restore the webs about 30 small sites
Would anyone suggest a person that could do that?