We are hosting a site on w2k3 server and every couple of days it just hangs. type in the url and it will not load, it timesout then u see the typical 404 error page.
We have about 150 websites hosted on the same server, it just happens to this one.
Restart the application and its back up like it's never been down, speedy and running smoothly. I have tried looking for memory leaks, i've put it in its own application pool and it still happens.
Our client is getting frustrated by this and so are we with ourselves for not being able to resolve it.
So I requested a total of 5 to 6 times for a reboot from my DC. Whenever I try to start my AFP firewall, it just hang my server. Even after I reinstall AFP and start it, it still hang my server! Is there any log file where I can keep track of the problem?
I have a VPS in which mails are hanging in Mailqueue. When I use these commands at SSH(iptables -D OUTPUT 2 iptables -D OUTPUT 1 ), every thing goes fine and mails are started delivering but after 8 or 9 hours same problem occurs.
So my question is:
Can there be a permanent solution for this problem?
A spammer (probably www.powerball.com) is sending spams using one of my email addresses as his / her "from" address. This hanged my mail server last week and it took more than 60 hours to solve the problem.
My host replied me the problem was "You have over 100,000 emails in your mail queue due to a large amount of Frozen emails that were either deferred by the remote servers or sent to invalid addresses repeatedly".
From this morning, my emails are blocked again. I can't send / receive mails using any of my email accounts (from this server). I don't know how long this will take again to solve the situation, and I'm afraid that this may not be the last time.
Now I don't know what to do. Ideally, a logical solution could be to delete any bounced mail automatically (I'm using nutsmail + squirrel mail).
My video sharing site has high traffic, alexa rate:3,000
My site has 2 servers to split the load. 2 servers share a mysql server. Using rrdns to load the balance.
Server A running mysql 5.0,lighttpd Server B running lighttpd. Server B connect to A's mysql database.
During peak time. B can not connect to A's mysql server. It says server not responding. But A still running fine. When I check mysql log file. /usr/libexec/mysqld: Forcing close of thread .....
And when run top, the load average is 20.
The spec of Server A Intel(R) Xeon(TM) CPU 3.06GHz dual core. 2G Ram.
Here is the my.cnf
Quote:
[mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock # Default to using old password format for compatibility with mysql 3.x # clients (those using the mysqlclient10 compatibility package). old_passwords=1 max_connections = 1000 wait_timeout=60 connect_timeout=10 interactive_timeout=120 join_buffer_size=1M query_cache_size=128M query_cache_limit=2M max_allowed_packet=16M table_cache=1024 sort_buffer_size=2M read_buffer_size=2M
My question, do I need another maching C to run lighttpd, and just keep mysql on A. Or I can do some mysql optimization on A.
Also, if my site keeps going, can I have 1 mysql server and 5 http servers?
I've got a client who seems to be having a problem with his e-mail on my VPS.
When he tries to download mails his browser(thunderbird) says 'Receiving one of 80' and hangs. The only solution is to go into webmail and delete some of the mails then try and receive them again. One thing that puzzles me is he doesn't have 80 mails in his account, he only have 33.
This isn't happening with anyone else who's using thunderbird and my VPS.
After the micro update, the database copy function started to hung even just for copying database with 4 tables with less than 10 rows of recrods. Although I followed the link below to remove the hung database copy and remove the unfinished database copied. URL....However, no successful database was copied at all even after the timeout was adjusted.
If I type google.com in my address bar, it forwards me to www.google.com. This is not happening for my website right now. I think its a good idea to do this, since then search engines will have only 1 main URL for the website to index.
My question is:
How do I implement this? I think this may involve mucking with CNAME settings...
I use Ian Lloyd's book and that's where I found out about this forum. Looks like a great forum.
I downloaded Fliezilla FTP and I'm trying to transfers files from my computer onto an angelfire web site.
Filezilla asks for a server address and I put in the URL address that I registered with angelfire. It then asks me for an administration password, and I put in my password to the angelfire site. I keep getting: Error: Connection to server lost...
Does anyone know what I'm doing wrong here? I would like to use Filezilla to upload my files (web pages) to the angelfire site.
I have a website which is currently hosted with streamline.net on their shared msql 11 server.
We have had several issues with them over the last few weeks where someone is using most of the server and slowing everyone elses sites down so much so they crash. This week and weekend are my busiest time of the year (I sell fancy dress) and my site it totally unuseable.
We have phoned them and they have done nothing except ask us for a log which we have provided for short periods of time.
The down time has now got so bad that I have had only 2 sales today. I estimate I am losing approx 400 per day at the moment due to this problem.
Is there anything that I can do urgently to prevent my business from being killed by someone else.
So I'm interviewing with a company and when I typed in the URL to their website, I was met with a nasty surprise: a "hacked by so and so" message! However, after looking closer, I see that I had accidentally appended a period (".") to the end of the domain name, for example: http://www.example.com./
When I removed the period, the site appeared as normal. I don't know anything about the server other than it's IIS. Is there anything I can suggest to them when I go in to interview? I'd like to point this out to them; it may even help my chances at landing the job! (It's not related to networking, though.)
Is it possible to buy a dedicated server off eg Dell and host your own website on it from home ie with a www prefix to the url- Do ye know any good tutorial on it. Would 20Mbit bandwidth be enough bandwidth for a fairly busy php ,mysql site? Completely new to this.
I have a domain name websiteexample.com and its hosted with somebody, I have built a new website under a new domain .co.uk on a new server and need to redirect my .com to the .co.uk, how the best way to handle this with serach engines in mind, I dont want to loose my .com listing if possible, is a framed forward a good way?
I want to have my email and website going to different servers:
At the moment i have it setup so that the nameserver records point to the ip of the website. That means that both site and mail go to the server where i host my site. I have then set up an mx record to point the mail to another server...
however can i make this split at the start?.. i.e. from the domain registar? can i set up an A record to point to the website and an MX record for the mail? instead of pointing them both to the website and then redirecting the mail to another server?
Just this week, I believe one of my site has been hacked...or potentially my whole server! When accessing the website (a vBulletin forum), instead of going to the main page, we get a screen that looks like Window's "My Computer" and there is a scan running. Firefox has blocked the site for suspicion.
I am stumped. Where to begin? I have full SSH access to my server (after rebooting it). Thank you in advance.
I have a wordpress site, and am trying to find someone good and reasonable price to design me a template for the website so I can still use wordpress but have access and control to everything.. I am going to buy a domain as well to hook wordpress up to it so I can edit themes etc.. I was looking at maybe using mmhosting..
Also, I have a forum, but not sure what type of forum I need to be able to arrange it and add and use features don't I can't now, so basically upgrade..
My site, as I said is wordpress but I want it to look like the forums I am using..
I'm thinking of starting a website that pokes fun at news stories and photos, but I'm a complete rookie at this. All the RSS feeds I found say they are free for non-commercial use. I want to be able to sell t-shirts and caps on my site, or at least advertising. Any ways to use current news and photos that are free or inexpensive?
I've discovered that a site of mine has being completely copied
The sites are in a different country
[url] [url]
The original site, that is still currently under construction with a lot of copy, rewriting and pages still have
[url]
Now, I don't mind someone taking inspiration or borrowing ideas. I'll admit as a web designer I have 1000's of book marks of sites that I've liked and will look at for ideas and inspiration, but I don't just download and put up.
Now as the sites are in a separate country I don't know yet if it is worth all the hassle as our customer base are separate, but I presume that having identical content means that google ranking could be damaged?
I registered my domain with domain.com several weeks ago. Then, when I tried to get web hosting services! but I had the worst experience over the internet by professional internet company.
Anyway, the issue is not that, I did lost my money with this company but I did manage to purchase web hosting services with another web hosting company (webhostingpad.com).
However, now I am stuck with how do I manage to activate my web address at (domain.com) to be directed to my website at (webhostingpad.com).
I tried both companies support with no respond at all.
So, My question is;
What is needed to do now:
How do I activate my web address over the internet?
How to make this address point to my website at webhostingpad.com?
How to make my address shows in all search engines?
