Cant Login To My Server Using Putty
Jul 3, 2008I'm trying to get to my server using putty but when i enter my root password is says its invalid when i know its valid because i can login with it in WHM.
View 4 RepliesI'm trying to get to my server using putty but when i enter my root password is says its invalid when i know its valid because i can login with it in WHM.
View 4 RepliesI am using Putty to connect to my server via ssh.
When opening a direct connection, i can login quickly without any problem
Quote:
login as: gracie
gracie@server1's password:
Last login: Thu May 7 07:31:26 2009 from 192.168.0.5
gracie@server1 [~]# sudo su -
Password:
root@server1 [~]#
When I open a connection FROM ANOTHER SERVER, I have to wait more than 20 seconds
Quote:
login as: tech2
tech2@server2's password:
Last login: Thu May 7 07:32:07 2009 from 192.168.0.5
tech2@server2 [~]# ssh gracie@192.168.0.222
Password:
After I enter the password, I waited 20 seconds before I am logged in.
I am having problem login to my server using root as login.
Here is the situation:
I have the root access for WHM as user1 for login, and password1 for password. This can allow me to login to my WHM.
However, in SSH (Putty) I tried to connect to the server using user1 as login, but when I typed password1, it said access denied..
I am trying to transfer a 1.1GB file from one of my servers to one of my servers in another data center.
What command would I use inside PuTTy to transfer the file via FTP, not SFTP.
what do you guys use for shell access?
It's been 2 years since last Putty release, so would like to dump it in favor of something else.
How do I configure PuTTY to produce the equivalent of this command:
ssh -f root@xxx.xxx.xxx.xx -L 3333:yyy.yyy.yyy.yy:80 -N
So far the configuration I've come up with is:
Source Port: 3333
Destination: yyy.yyy.yyy.yy:80
"Local"
"Auto"
This doesn't seem to do anything at all. I don't use windows much, so go easy on me
I have setup a private/public key for myself so I can login to SSH with a different password now I need to setup for someone else.
Now do I put there public key in the same file as my public key on the server, or do I make a new file on the server?
I usually go mobile and I would need putty in my wm 6.1
is there some sort of "putty" or any other ssh tool where i can run ssh commands?
putty, and the SSH commands in general
When I open a file using "vi" command, it just open the file and I don't know how to edit it, by removing or adding text to it, so how can I do it?
What is the ssh command to initiate my FTP backup for WHM? I do not want to wait for the control panel cron and wanted to run it manually?
View 6 Replies View RelatedIm at work, and im trying to use putty behind a proxy. Im guessing they have L3 managed switched as I cannot just connect a server like I wiuld normally at home.
They are using a windows proxy (port 8080) so im guessing ISA...
I use SSH Putty from my Windows PC to login to multiple Servers. So I usually have multiple Putty windows on my desktop.
How can I set Putty to display the hostname or IP Address of the server in the title bar - So it'd be easy for me to choose the right Putty Window.
Out of sudden today, my cPanel server box appear this kind of error on my putty screen. Just wondering what is that all about?
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: Oops: 0000 [#2]
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: SMP
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: CPU: 1
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: EIP: 0060:[<c01ae881>] Not tainted VLI
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: EFLAGS: 00010282 (2.6.21.1 #2)
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: EIP is at ext3_splice_branch+0x90/0x134
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: eax: 000007ab ebx: cf3b1c28 ecx: 00000001 edx: 000007a9
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: esi: e87fdd80 edi: cf3b1c40 ebp: f798d9b4 esp: cf3b1bd5
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: Process pkgacct (pid: 3859, ti=cf3b0000 task=eebd25b0 task.ti=cf3b0000)
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: Stack: 00012b35 a9000000 04000007 28f31165 66cf3b1c 40012b35 00cf3b1c d0000000
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: 40c01aeb 00cf3b1c 01000000 40000000 e6cf3b1c 6cc01701 03f31164 04000000
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: b4f31165 01f798d9 00000000 62000000 a0000000 c7f31164 00012b31 00000000
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: Call Trace:
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: =======================
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: Code: 3b 5c 24 2c 7d 0b 8b 17 89 c8 41 89 04 9a 43 eb ef 85 f6 74 1e 8b 4c 24 2c 8b 54 24 08 8d 44 0a ff 81 46 1c 6b 44 24 28 0c 8b 44 <38> 04 01 c8 48 89 46 20 8b 4c 24 0c 31 d2 a1 80 42 5f c0 89 51
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: EIP: [<c01ae881>] ext3_splice_branch+0x90/0x134 SS:ESP 0068:cf3b1bd5
I’ve just switched to a deticated server. I have backups of sites I need to move over and restore. cPanel has a “Restore a Full Backup/cpmove” option. Two questions…
1) How do I upload the back up file to the /home directory of my deticated server?
2) If the backup file is under a current client “/home/clienta” how do I restore it?
I’ve also tried using puTTy to restore the file.
- logged into as “root”
- typed “cd /home”
- typed “/scripts/restorepkg domainname”
i use for login to ssh by putty
and i run very command and result
how may i saved all this command and result in putty?
Just got a new additional VPS with WHM/cPanel.
Browse to www.mydomain.com/webmail and get login box > login accepted and taken to Horde/Squirrelmail choice screen > choose Squirrelmail and get login box ... login not accepted! > Retry and choose Horde ... login not accepted!
The login is correct and the results are the same when logging in as root, or through /cPanel or /Webmail.
I've setup my ssh to login with keys and passphrase. I would like to do away with passphrases by using agent forwarding. Putty uses Pageant to store private keys, bu from all the tutorials I can find, it's a windows based feature (to add private keys). I've also tried to use ssh-add (a different agent), but it has trouble recognizing my private key passphrase (made with putty). I know the private key is working because I'm able to use use ssh without a password, just the phrase.
What's the best way to do this? Is there a putty pageant command line that I don't know about?
through my /var/log/messages file and some guy been trying every username under the sun to login to my server via FTP over a period of 2-3 hours. He wasnt able to gain access, but next time who knows .
Code:
Nov 19 23:50:13 toria proftpd[1553]: toria.xxx(xxx.xxx.xxx.xxx[xxx.xxx.xxx.xxx]) - FTP session opened.
Nov 19 23:50:13 toria proftpd[1552]: toria.xxx (xxx.xxx.xxx.xxx[xxx.xxx.xxx.xxx]) - no such user 'becky'
Nov 19 23:50:13 toria proftpd[1553]: toria.xxx(xxx.xxx.xxx.xxx[xxx.xxx.xxx.xxx]) - no such user 'bela'
Nov 19 23:50:13 toria proftpd[1559]: toria.xxx(xxx.xxx.xxx.xxx[xxx.xxx.xxx.xxx]) - FTP session opened.
Nov 19 23:50:13 toria proftpd[1560]: toria.xxx(xxx.xxx.xxx.xxx[xxx.xxx.xxx.xxx]) - FTP session opened.
Nov 19 23:50:13 toria proftpd[1559]: toria.xxx(xxx.xxx.xxx.xxx[xxx.xxx.xxx.xxx]) - no such user 'bella'
Nov 19 23:50:13 toria proftpd[1560]: toria.xxx(xxx.xxx.xxx.xxx[xxx.xxx.xxx.xxx]) - no such user 'bela'
Nov 19 23:50:14 toria proftpd[1563]: toria.xxx(xxx.xxx.xxx.xxx[xxx.xxx.xxx.xxx]) - FTP session opened.
Nov 19 23:50:14 toria proftpd[1564]: toria.xxx(xxx.xxx.xxx.xxx[xxx.xxx.xxx.xxx]) - FTP session opened.
Nov 19 23:50:14 toria proftpd[1563]: toria.xxx(xxx.xxx.xxx.xxx[xxx.xxx.xxx.xxx]) - no such user 'ben'
Nov 19 23:50:14 toria proftpd[1564]: toria.xxx(xxx.xxx.xxx.xxx[xxx.xxx.xxx.xxx]) - no such user 'bella'
Nov 19 23:50:14 toria proftpd[1568]: toria.xxx(xxx.xxx.xxx.xxx[xxx.xxx.xxx.xxx]) - FTP session opened.
Nov 19 23:50:14 toria proftpd[1569]: toria.xxx(xxx.xxx.xxx.xxx[xxx.xxx.xxx.xxx]) - FTP session opened.
Nov 19 23:50:14 toria proftpd[1568]: toria.xxx(xxx.xxx.xxx.xxx[xxx.xxx.xxx.xxx]) - no such user 'benjamin'
Nov 19 23:50:14 toria proftpd[1569]: toria.xxx(xxx.xxx.xxx.xxx[xxx.xxx.xxx.xxx]) - no such user 'ben'
i have changed my servers ssH login port for more security.. After i changed port could'nt login to my server with ssH and i did ask to dedicated company to login my server and they able to login through the specified port by SSH.. But i can't still connect.. This is happened before on my old server.. It is very strange sometimes i can login sometimes can't login but i could'nt login on my new server yet.. I have changed PuTTY i did try SSH Explorer as well and i did try my laptop to login .. Still same can't login.
If they change the port to 22 i will login easyly i know but i should able to login on different port so that is my problem..
im using belkin modem rooter at home to connect internet.. i don't no if it is couse the problem..
i had access in some servers via SSH and when i try to connect i get:
Welcome to The HOST!
login as: nickname
--------------------------
We monitor/log everything on that server! IP Logged!
--------------------------
nickname@host's password:
.............
I know that there is the motd file in /etc that i can put a message but i see it when i full be recognized by the server.. (after putting the password).. How can i put the other 2 messages?
Im running Debian Etch as a webserver, on a dell poweredge 2650, it has been working great, and a few months ago it was up a little over 100 days and it just stopped allowing me to login via ssh or ftp or webmin (which uses the linux password file). i couldnt even log in at the console so i just rebooted it (power switch) and then once it came back up it worked fine. and now about 100+ days later its doing the same exact thing. I must note that all the websites on the system are still working fine, apache and mysql have not been affected, however the mail system seems to have stopped again too. Has anyone else ever had this sort of problem?
View 3 Replies View RelatedMy server is generating a lot of this logs and taking too much RAM of my server in the SQL process
How can I block an IP adress ?
Log Description:
Login failed for user 'sa'. [CLIENT: 199.227.13.134]
For more information, see Help and Support Center at [url]
Running A Windows 2003 Server at co-location. I just looked at my event viewer security log and am stunned to see thousands of Failure Audit logon attempts. They have been trying since Saturday at 9:43pm, till currently. Almost all of them failed, but a few were successfull. All of the successfull attempt appear to be:
Successful Network Logon:
User Name:
Domain:
Logon ID: (0x0,0x2E9F395)
Logon Type: 3
Logon Process: NtLmSsp
Authentication Package: NTLM
Workstation Name: DAS
Logon GUID: -
Caller User Name: -
Caller Domain: -
Caller Logon ID: -
Caller Process ID: -
Transited Services: -
Source Network Address: 125.82.7.86
Source Port: 0
How do I lock this down? How can I block these guys from trying to login? The IPS are coming from all over the world though. I did whois for a few, and they range from Poland, Russia, to China.
I have the root access for the server but i lost the password for the mysql is there any way that i can get it
View 4 Replies View RelatedI cannot login to Plesk server with admin credentials as it says Error: Access for administrator from address 'xx.xx.xx.xx' is restricted in accordance with IP Access restriction policy currently applied. Also I cannot SSH to server and it says connection refused.
View 2 Replies View RelatedI cannot login server:8447
1. netstat -anp |grep 8447 = nothing
2. iptables -L Chain INPUT (policy ACCEPT) - empty; Chain FORWARD (policy ACCEPT) - empty; Chain OUTPUT (policy ACCEPT) - empty
This happened after the unsuccessful upgrade.
Code:
Execution failed.
Command: autoinstaller
Arguments: Array
(
[0] => --select-product-id
[1] => plesk
[2] => --select-release-current
[3] => --upgrade-installed-components
[4] => --include-components-from-class
[5] => vendor=parallels
[6] => --include-components-from-class
[7] => patched
[code]....
ERROR: Failed to download the package URL...transfer closed with 205 bytes remaining to read..Not all packages were installed.Please try installing packages again later.try installing the packages again.