I use SSH Putty from my Windows PC to login to multiple Servers. So I usually have multiple Putty windows on my desktop.
How can I set Putty to display the hostname or IP Address of the server in the title bar - So it'd be easy for me to choose the right Putty Window.
i run a busy script that whenever mysql goes away for even a minute, it sends me an email that a data packet could not be added to the database. This is a problem because i have 2k users and in one day can get up to 10k emails.
Script is being rewritten so that email feature will be removed but until then i'm stuck with it, so is there anyway i can blackhole an email title so that it gets deleted and doesn't clog up my mail queue?
blackhole, fail, or something that will just delete these emails? all of them have the same title "mysql error - username"
I am trying to transfer a 1.1GB file from one of my servers to one of my servers in another data center.
What command would I use inside PuTTy to transfer the file via FTP, not SFTP.
what do you guys use for shell access?
It's been 2 years since last Putty release, so would like to dump it in favor of something else.
How do I configure PuTTY to produce the equivalent of this command:
ssh -f root@xxx.xxx.xxx.xx -L 3333:yyy.yyy.yyy.yy:80 -N
So far the configuration I've come up with is:
Source Port: 3333
Destination: yyy.yyy.yyy.yy:80
"Local"
"Auto"
This doesn't seem to do anything at all. I don't use windows much, so go easy on me
I have setup a private/public key for myself so I can login to SSH with a different password now I need to setup for someone else.
Now do I put there public key in the same file as my public key on the server, or do I make a new file on the server?
I usually go mobile and I would need putty in my wm 6.1
is there some sort of "putty" or any other ssh tool where i can run ssh commands?
I'm trying to get to my server using putty but when i enter my root password is says its invalid when i know its valid because i can login with it in WHM.
View 4 Replies View Relatedputty, and the SSH commands in general
When I open a file using "vi" command, it just open the file and I don't know how to edit it, by removing or adding text to it, so how can I do it?
What is the ssh command to initiate my FTP backup for WHM? I do not want to wait for the control panel cron and wanted to run it manually?
View 6 Replies View RelatedIm at work, and im trying to use putty behind a proxy. Im guessing they have L3 managed switched as I cannot just connect a server like I wiuld normally at home.
They are using a windows proxy (port 8080) so im guessing ISA...
Out of sudden today, my cPanel server box appear this kind of error on my putty screen. Just wondering what is that all about?
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: Oops: 0000 [#2]
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: SMP
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: CPU: 1
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: EIP: 0060:[<c01ae881>] Not tainted VLI
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: EFLAGS: 00010282 (2.6.21.1 #2)
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: EIP is at ext3_splice_branch+0x90/0x134
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: eax: 000007ab ebx: cf3b1c28 ecx: 00000001 edx: 000007a9
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: esi: e87fdd80 edi: cf3b1c40 ebp: f798d9b4 esp: cf3b1bd5
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: Process pkgacct (pid: 3859, ti=cf3b0000 task=eebd25b0 task.ti=cf3b0000)
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: Stack: 00012b35 a9000000 04000007 28f31165 66cf3b1c 40012b35 00cf3b1c d0000000
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: 40c01aeb 00cf3b1c 01000000 40000000 e6cf3b1c 6cc01701 03f31164 04000000
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: b4f31165 01f798d9 00000000 62000000 a0000000 c7f31164 00012b31 00000000
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: Call Trace:
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: =======================
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: Code: 3b 5c 24 2c 7d 0b 8b 17 89 c8 41 89 04 9a 43 eb ef 85 f6 74 1e 8b 4c 24 2c 8b 54 24 08 8d 44 0a ff 81 46 1c 6b 44 24 28 0c 8b 44 <38> 04 01 c8 48 89 46 20 8b 4c 24 0c 31 d2 a1 80 42 5f c0 89 51
Message from syslogd@test at Sat May 24 15:43:15 2008 ...
test kernel: EIP: [<c01ae881>] ext3_splice_branch+0x90/0x134 SS:ESP 0068:cf3b1bd5
I am using Putty to connect to my server via ssh.
When opening a direct connection, i can login quickly without any problem
Quote:
login as: gracie
gracie@server1's password:
Last login: Thu May 7 07:31:26 2009 from 192.168.0.5
gracie@server1 [~]# sudo su -
Password:
root@server1 [~]#
When I open a connection FROM ANOTHER SERVER, I have to wait more than 20 seconds
Quote:
login as: tech2
tech2@server2's password:
Last login: Thu May 7 07:32:07 2009 from 192.168.0.5
tech2@server2 [~]# ssh gracie@192.168.0.222
Password:
After I enter the password, I waited 20 seconds before I am logged in.
I’ve just switched to a deticated server. I have backups of sites I need to move over and restore. cPanel has a “Restore a Full Backup/cpmove” option. Two questions…
1) How do I upload the back up file to the /home directory of my deticated server?
2) If the backup file is under a current client “/home/clienta” how do I restore it?
I’ve also tried using puTTy to restore the file.
- logged into as “root”
- typed “cd /home”
- typed “/scripts/restorepkg domainname”
i use for login to ssh by putty
and i run very command and result
how may i saved all this command and result in putty?
I am having problem login to my server using root as login.
Here is the situation:
I have the root access for WHM as user1 for login, and password1 for password. This can allow me to login to my WHM.
However, in SSH (Putty) I tried to connect to the server using user1 as login, but when I typed password1, it said access denied..
I've setup my ssh to login with keys and passphrase. I would like to do away with passphrases by using agent forwarding. Putty uses Pageant to store private keys, bu from all the tutorials I can find, it's a windows based feature (to add private keys). I've also tried to use ssh-add (a different agent), but it has trouble recognizing my private key passphrase (made with putty). I know the private key is working because I'm able to use use ssh without a password, just the phrase.
What's the best way to do this? Is there a putty pageant command line that I don't know about?
My customer has an external facing Apache server that is acting as a reverse proxy to two internal applications. They have:
- external addresses for each app which resolve to different ip addresses, so app1.their_domain.com and app2.their_domain.com resolve to 77.3.170.10 and 77.3.170.11 respectively.
- the Apache server has two network interfaces with ip addresses 192.168.10.10 and 192.168.10.11
- the external ip addresses resolve to the above internal addresses
- the firewall between the Apache server and the internal app servers is configured to allow traffic from 192.168.10.10 to reach app_server1, and traffic from 192.168.10.11 to reach app_server2, both using port 7777.
I have configured a virtual host in httpd.conf for each ip, i.e.
Code:
<VirtualHost 192.168.10.10:80>
...
ProxyPass /app http://app_server1:7777/app
ProxyPassReverse /app http://app_server1:7777/app
RewriteRule ^/$ /app/app1 [R,L]
...
<VirtualHost>
and
Code:
<VirtualHost 192.168.10.11:80>
...
ProxyPass /app http://app_server2:7777/app
ProxyPassReverse /app http://app_server2:7777/app
RewriteRule ^/$ /app/app2 [R,L]
...
<VirtualHost>
This works fine in that the external address are being routed to the correct application, however the firewall is blocking requests to the second app as it appears the requests are coming from the Apache servers 'primary' ip address 192.168.10.10 instead of 192.168.10.11.
Is it possible to send requests using the ip address from the relevant VirtualHost?
Windows server 2008
Apache 2.2
I am using virtuozzo firewall to secure access.
I enter 58.27.175.211/255.255.255.0 for Source Address and Netmask for port 22.
But still I can connect using 58.181.103.217 or 58.27.151.120.
Second is it possible to enter two different ip address in source address?
I just bought a new ip address and want to setup this new ip as my server's main ip, making the 'existing main ip' as the secondary ip.
Which means, this new ip will be the server's default ip address for all services, including when connecting to other server.
I'm using CentOs 4.5 and swsoft's panels: HSPcomplete & Virtuozzo Power Panel, and Webmin.
I want to redirect a website to a particular URL so that the address bar shows the same URL and not the destination URL. I know it is possible via URL masking, however, I want it in such a way that whenever somebody clicks on any link in the website, the address bar should still show the original URL. To put it in simple words, Suppose I want to redirect [url] to [url]. Now if there is a link named contact/index.htm and somebody clicks on it the address bar should display [url]and not redirect to [url]
How can it be possible using URL Rewrite method in .htaccess file?
The problem usually goes like this:
- I can't access the webserver
- I'll try to restart httpd, and I'll get
Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:443
To fix this, I run
[root@www1 ~]# lsof -i tcp:443
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
perl 11307 apache 4u IPv6 476943447 TCP *:https (LISTEN)
There is always leftover process that is causing the restart to fail. Once i force kill the process, I am able to restart httpd properly.
Now it is ok if this just occurs once in a while, but this problem keeps repeating itself almost everyday at 4am server time (cron time?). What can I do to permanently fix this?
Installed APF on a Fedora Core 6 box, had a problem with one of the modules (Unable to load iptables module (ipt_multiport), aborting) which was sorted by editing the functions file.
But I now get this come up 30 times when I start the firewall:
hostname: Unknown host
Some guides talk about setting a hostname but I dont have a domain name just an IP Address.
Then depending on what guide I look at there are references to different files. So I am not sure which file to edit.
I hope your day is going good. I've been trying to fix a problem I had all week. I receive daily email notification that "example.[url]" does not resolve to any IP. However, when in WHM, it already contains Server Main Ip: 208.53.183.125. I've tried a few solutions from the web, but to no avail:
IMPORTANT: Do not ignore this email.
The hostname (example.mydomainname.com) resolves to . It should resolve to 208.53.183.125. Please be sure to correct /etc/hosts as well as the 'A' entry in zone file for the domain.
Some are all of these problems can be caused by
/etc/resolv.conf being setup incorrectly. Please check this file if you
believe everything else is correct.
You may be able to automaticly correct this problem by using the
'Add an A entry for your hostname' under 'Dns Functions'
in your Web Host Manager
1) Within WHM, I have the following:
-Add an A entry for your hostname (I only have one listed)
Hostname: example.mydomainname.com
Server Main Ip: 208.53.183.125
-Primary/secondary nameserver
Primary Nameserver: ns1.mydomainname.com (A entry = 208.53.181.26)
Secondary Nameserver: ns2.mydomainname.com (A entry = 208.53.181.27)
-Resolver Configuration
Primary Resolver: 66.90.68.25
Secondary Resolver: 66.90.68.26
-Additional IP my webhost gave me to use:
208.53.181.26 (used in primary name server)
208.53.181.27 (used in secondary name server)
208.53.181.28
-Current DNS Zone listing:
example.com (my website URL that is currently working)
example.mydomainname.com (hostname I made myself that contains the server main IP)
ns1.mydomainname.com (A entry = 208.53.181.26)
ns2.mydomainname.com (A entry = 208.53.181.27)
2) My edit "edit /etc/resolv.conf" contains the following:
Search localdomain
nameserver 66.90.68.25
nameserver 66.90.68.26
Issue: I receive daily email notification that "example.mydomainname.com" does not resolve to any IP. However, when in WHM, it already contains Server Main Ip: 208.53.183.125.
Here are the scenarios :
1. This Dedicated Server don't have main domain name but I use something like hostname.domain.com for the hostname.
2. The nameservers I use are something like ns21.domain.com and ns22.domain.com which I registered it already on my domain registrar.
3. Domain.com is use on other Dedicated server
Are these kind of setup okay? or should I really changed the hostname.domain.com to something else that is hosted on the same server?
I have a server with RHEL 5 installed. The problem is that the server shows the output of the hostname command as (none). I checked the /etc/sysconfig/network file and it shows the correct hostname. I also tried to change the hostname in the /etc/sysconfig/network file and restart the server. But hostname command still shows (none).
View 4 Replies View RelatedI have a dedicated server with WHM 11.23.2. I am in the process of "attempting" to change the hostname for a group of websites and also the nameservers.
Let's say for practical senses that these were the old details:
Hostname: abc.example.com
Nameservers: ns1.example.com and ns2.example.com
I changed in the following sections of WHM..
Server Configuration -> Basic cPanel/WHM Setup -> Hostname to
123.newsite.com
and then...
Networking Setup -> Hostname to 123.newsite.com
and then...
Server Configuration -> Basic cPanel/WHM Setup -> Primary Nameserver to ns1.newsite.com and then...
Server Configuration -> Basic cPanel/WHM Setup -> Secondary Nameserver to ns2.newsite.com.
Then...
Networking Setup -> Nameserver IPs. I deleted the old ones and created the two new ones: ns1.newsite.com and ns2.newsite.com.
I have double checked that this information is still there. Obviously newsite.com is listed as a domain/account. However, example.com was naturally the first one associated with this server.
I performed a server reboot, apache reset etc.
This was three days ago. I assumed it had all changed over. Until I (stupidly) remembered that I hadn't changed the goDaddy information to point to these new nameservers. I panicked thinking all the sites (six of them) would be down. However, they weren't. When I tried to change the nameserver information for a domain in goDaddy it came back with errors... it would only accept ns1.example.com and ns2.example.com.
So, I did a tracert to the IP address of the server and indeed it comes back as abc.example.com. Every domain is associated with that static IP.
I can't even find anywhere where abc.example.com is listed within the WHM. All the new values are listed... so, where is it pulling this from? I thought the reset of the server (as a graceful reboot) would resolve this issue.. it hasn't. I've rebooted twice and awaited the thirty minutes for everything to get back online. No success.
Quote:
The zone for the root domain splinteredmedia.net is missing, or could not be read. The ip address will be read from the webserver configuration and a new zone will be created for this subdomain. Bind reconfiguring on smpl using rndc Error reconfiguring bind on smpl: rndc: connect failed: 127.0.0.1#953: connection refused
Created DNS entry for ns1.splinteredmedia.net
Is the error i get when i try to add a entry for one of my nameservers.
I have cPanel on a CentOS 5.1 VPS
I am still pretty new to CentOS
how would i go about adding a zone and if somebody cpuld point me to a place where i can read exactly what it is and how to set it up i would be very grateful
I just got a deticated server with cPanel
Hostname: xyz.mydomain.com (example)
I tried to do a traceroute and I get this message
"unable to resolve target system name"
My registrar is GoDaddy. Is there something I need to set up for xyz?
I have my private NS set up, ns1/ns2.mydomain.com with their associated IPs.