Im running Debian Etch as a webserver, on a dell poweredge 2650, it has been working great, and a few months ago it was up a little over 100 days and it just stopped allowing me to login via ssh or ftp or webmin (which uses the linux password file). i couldnt even log in at the console so i just rebooted it (power switch) and then once it came back up it worked fine. and now about 100+ days later its doing the same exact thing. I must note that all the websites on the system are still working fine, apache and mysql have not been affected, however the mail system seems to have stopped again too. Has anyone else ever had this sort of problem?
I cannot login to Plesk server with admin credentials as it says Error: Access for administrator from address 'xx.xx.xx.xx' is restricted in accordance with IP Access restriction policy currently applied. Also I cannot SSH to server and it says connection refused.
ERROR: Failed to download the package URL...transfer closed with 205 bytes remaining to read..Not all packages were installed.Please try installing packages again later.try installing the packages again.
I cannot SSH or login into Plesk Admin panel. Once I tried SSH, it says 'connection refused'. Once I tried login into admin panel, it says 'Error: Access for administrator from address 'xxx.xxx.xxx.xxx' is restricted in accordance with IP Access restriction policy currently applied.
Tried restarting the plesk server too. Nothing seems working.
Over the weekend, I upgraded from Plesk 10.3 to Plesk 11.5, using the updater in the control panel. Everything seemed to go well. However, this morning I've noticed that some, not all, email accounts are having trouble logging into the server to send and receive mail. Other accounts are working fine.Via POP, I get this error: -ERR Temporary problem, please try again later
Via SMTP, I get this error: 535 auth failure
I see this in the maillog:
Jun 17 07:15:05 [server] courier-pop3d: LOGIN FAILED, user=[username], ip=[::ffff:xxx.xxx.xxx.xxx] Jun 17 07:15:05 [server] courier-pop3d: authentication error: Input/output error
And this... Jun 17 07:24:50 [server] smtp_auth: FAILED: [email address] - password incorrect from [host] [xxx.xxx.xxx.xxx]
I replaced the server name, username, host, and IP in the above.
Here are the steps I've tried so far. - Changing the password using the control panel. - Updating the number of daemons in authdaemonrc - Restarting the services
I just upgraded my Plesk on Ubuntu (vServer) yesterday. But after the upgrade I couldn't login to the Panel anymore because all I get when I try to reach the panel (https://panel.examplesite.com:8443) is a white screen.
I rebooted the server and restarted the panel as well as Apache several times with no change.
I have VPS Server with Parallels Plesk 11.5.30 (64 bits) on OVH.ORG..Today i do Update to newest version via https://MY-IP:8447
Code: [URL] .....
Now i cant login to my server: [URL] ....
How can i repair it. I dont wanna install again Plesk Panel becouse i have a lot of configuration and email adress.All components like Apache Mysql, ftp works good, but i cant only login.
It seems like I have got a lot of trouble with Plesk 12 on a CentOS 7 machine.
1. I could not install Plesk properly due to some drweb problem. 2. Than the smb configuration seems only to be implemented partly. 3. Suddenly FTP login is not possible anymore (503 Access denied)
And now even Apache is not running anymore!
Code:
Unable to generate the web server configuration file on the host <xxxxxxx.dyndns.org> because of the following errors:
Template_Exception: [Mon Jun 08 14:16:28.058302 2015] [so:warn] [pid 4230] AH01574: module actions_module is already loaded, skipping [Mon Jun 08 14:16:28.063364 2015] [so:warn] [pid 4230] AH01574: module headers_module is already loaded, skipping [Mon Jun 08 14:16:28.063957 2015] [so:warn] [pid 4230] AH01574: module logio_module is already loaded, skipping [Mon Jun 08 14:16:28.066150 2015] [so:warn] [pid 4230] AH01574: module suexec_module is already loaded, skipping httpd: Syntax error on line 357 of /etc/httpd/conf/httpd.conf: Syntax error on line 5 of /etc/httpd/conf.d
I'm running plesk 11.0.9 on Centos 6. I can't login anymore, the administration login page is just a blank page. The error in the log file is:
(mod_fastcgi.c.2746) FastCGI-stderr: PHP Fatal error: Call to a member function getContext() on a non-object in /usr/local/psa/admin/plib/Navigation.php on line 54
I would like my clients only to be able to access Plesk Panels from a certain domain, instead all from or with all the domains hosted on our server, is there a way to accomplish that?
When I try to login via webmail horde I get always:
Login failed because your username or password was entered incorrectly.
The logfile shows:
Jul 13 12:23:32 HORDE [error] [imp] FAILED LOGIN for mail@domain.tld [1.2.3.4] to to {127.0.0.1:143 [imap/notls]} [pid 5358 on line 139 of "/usr/share/psa-horde/imp/lib/Auth/imp.php"]Click to expand...
I just finished installing Plesk Panel 12. I seems like that everything is working as it should, except for FTP. I am not able to login with any FTP accounts.
After a few minutes or after specific actions Plesk shows the login screen without obvious reason. For example when I am trying to modify a file online and try to save it for the second time it always shows the login screen.
Also, when I enter the credentials I can see that the previous session(s) remain open. I have configured the session idle time to 1000 minutes, although I do not remain idle for 300 min anyway.
After a fresh install on a Debian Wheezy system, I get the following error(s) when trying to access the control panel.
https://sub.example.com:8443/ 404 Not Found Nginx
My log
Code: 2014/06/09 19:04:15 [warn] 32236#0: conflicting server name "" on 0.0.0.0:8443, ignored 2014/06/09 19:04:26 [error] 22597#0: *43 "/usr/share/html/index.html" is not found (2: No such file or directory), client: 68.51.77.126, server: , request: "GET / HTTP/1.1", host: "sub.example.com:8443"
I am using CentOS 6.4... I cannot login to the admin page. Showing this message:
Error: Unable to log you on. An internal error occurred in the Single Sign-on authorization engine. Please try to log in later, and contact your hosting service provider if the problem persists.
Error log: Doing restart of Parallels Installer... 2014-05-17 01:08:38: (server.c.1543) server stopped by UID = 0 PID = 10122 2014/05/17 01:15:04 [crit] 16495#0: *1 connect() to unix:/var/run/sw-engine.sock failed (2: No such file or directory) while connecting to upstream, client: 127.0.0.1, server: , request: "POST /plesk-billing/task-manager.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "localhost:8443"
[Code] ....
I have tried this post: [URL] ....
[root@ns4008757 ~]# /usr/share/plesk-billing/integration --command=repair-all Customer & Business Manager is not installed yet. [root@ns4008757 ~]# /usr/local/psa/bin/sso -g SSO status: on SSO server url: https://XXX.XXX.XXX.XXX:8443 SSO API version: sw:sso:idp:1_0 SSO Application ID: z9fabw14uesl6ccoz0wnpwk68eghgvs6ny7
After running this two lines, when i login to admin panel, it shows: Can not extract SAML message.
FTP logins worked fine yesterday. Today I get a 530 Login incorrect.
I think the only change since yesterday was a server reboot.
/var/log/secure tells me that /etc/ftpusers is missing
Code: Jun 8 00:33:19 macbook proftpd: PAM unable to dlopen(/usr/lib64/security/pam_stack.so): /usr/lib64/security/pam_stack.so: cannot open shared object file: No such file or directory Jun 8 00:33:19 macbook proftpd: PAM adding faulty module: /usr/lib64/security/pam_stack.so Jun 8 00:33:19 macbook proftpd: pam_listfile(proftpd:auth): Couldn't open /etc/ftpusers
Since the update from 11.5 to 12 working Horde login no longer, IMAP works otherwise perfect.
psa-horde.log: ERR: HORDE [horde] FAILED LOGIN for info@xydomain.tld (info@xydomain.tld) [xx.xx.xx.xx] to horde [pid 20347 on line 216 of "/usr/share/psa-horde/login.php"] xx.xx.xx.xx = Server-IP
Today morning a logged in in plesk without problems and started Fail2Ban and closed it. Now I want logged in and get only 502 bad gateway. All Domains working fine and shell access working fine too.
1) If I'm logged into my {other VPS} with Putty, then ssh root@67.xx.xx.xxx successfully logs me into {new VPS}, after the password prompt, so I know the root password can login (some of the time)
2) ...but not my Windows computer, both Putty, and SFTP fail. The SFTP error message is : "ERROR:> [7/31/2009 9:48:08 AM] Can't connect to 67.xx.xx.xxx:22. SFTP21 error = #0." Port 22 is correct, according to hosting support.
3a) Hosting support said... "Based on the information you have provided to us, I am assuming that either your firewall or ISP is blocking the standard 22 SSH port. If you would like, we can change this to a custom port number."
3b) That response doesn't help, since I'm using port 22 for the {other VPS}
My problem is, when I attempt to access a seperate webspace's control panel login through webspace2.com:8443 it automatically redirects me to https://hostname.com:8443.
If however I go to https://webspace2.com:8443 this redirect does not happen and I can log straight in through this domain.
Ideally I need to keep these domains separate and need to remove this non-https redirect that is currently happening.
I'm trying to redirect users to database/mail management pages with automatic login link, while logging in part works ok, I have issues with redirections.
Plesk is installed on different server than my site, and if I try to use "success_redirect_url" param in link url, it will show this error "Original link and target URL should be on the same domain."
It works ok if I prevent browser from sending http referrer to plesk, but I'm not sure if it will work for all user as this depends on their browser.
Is this a bug? Is there a workaround that would not depend on used browser?
I'm running Plesk for Linux 11.5 and I'd like to allow autocomplete of the userid field from the Roundcube login screen, but when i make the changes to the config file, they are not applied. It looks like Plesk is overriding them.
I edited the /usr/share/psa-roundcube/config/main.inc.php file and set "$rcmail_config['login_autocomplete'] = 1;"
When I check (using Firebug) the source code of the login page, I notice that autocomplete is indeed first set to "on", but it changes to "off" nearly instantly. I suspect that some .js script (inserted by Plesk?) overrides this setting.
This behavior seems to be backed by a statement in Plesk 11.5's release notes:
"Autocompletion is turned off on the login dialog for security reasons"
Is there any way I can undo the override and still keep autocomplete="on" ?
One failure cited by a recent PCI compliance report was that of the Plesk non-https login at port 8880. I believe we can resolve this by adding a firewall rule to block access to this port but wanted to check first if this will have any negative consequences elsewhere. Or is there a better way to achieve PCI compliance on this point?
I have done the migration with the Migration Manager from Confixx to Plesk 12.0.18. Users can login tho the mail account with Outlook, thats no problem(old password is working). If the webmailer is set to Hord the user also can login. But if i switch to roundcube it is not possible to login to the Webmailer! You get the message "Die Anmeldung ist fehlgeschlagen." (Login failed)
After changing the email password in plesk, it is then possibe to login(even if the new password is identical to the old one)?!?
Is this a known bug? Is there a solution for that?!? I really don't want to email every customor to ask him to change his password?!