I recently leased a server from leaseweb.com
It was suppose to have 1000mbps/sec full-duplex!
Can someone tell me how to check if I have what I paid for?
I tried wget from my friend's server who is with leaseweb aswell. Did a 100MB download test and for
30.36MB/sec === is this 1GBps? Please can someone tell me another way to test?
i want vps with 100mbps uplink port
vps 1 gb or little i just use it for uploading
and i want it with uploading speed 100kb/s
can i get it?
Like for example, recently talked to liquidweb. They have a 100mbs uplink port on their servers, but they only let you use 30% of it. But you can upgrade at anytime. Is that normal for hosts to do that?
View 2 Replies View Relatedi manage a little hosting business and looking for someone with PoP in telecity-2, Amsterdam, to get ip transit together
View 3 Replies View RelatedI'm not much of a co-location expert as we do not own our own equipment but a customer we help from time to time is asking me about this. They have a cabinet at theplanet and only a pair of redundant 100mbit uplinks coming into their cisco 2924 they rent from theplanet. Theplanet wants $350/mo along with $350 setup for a pair of redundant gigabit uplinks. Then another $225/mo for a Cisco Catalyst 2960G.
Does this at all seem reasonable to anyone? The switch can just be purchased so it's not that big of a deal. The uplink cost cannot be avoided though. If it's not reasonable obviously they can go back to their account manager to discuss it but I don't know what you'd expect to pay in Dallas for that.
Also before anyone suggests any other provider not an option. Last time they looked around theplanet was the only provider in dallas capable of handling the attacks. Others would just null route the IP's rather than trying to mitigate the attacks. So no point in making suggestions as it's been explored in the past.
100 Mbps Uplink
is that
if someone going to download a file from the server he is going to get 100mb speed?
What are the benefits of moving to faster uplink speeds? I'm considering upgrading from 10 to 100 Mbps. Does it only mean being able to send information faster or are response times improved as well?
View 4 Replies View RelatedWell i need for a week some provider who can setup a spare server/vps with 1000gps uplink , to maybe convince my college to get in contract and get better providers, instead of hosting the college site on our in-house machines. Since the loading speed of site is awful ! So am thinking of trying out for only a week the machine from that provider, and if am able to convince the department to maybe get into some contract with me (who in turn will be than using that provider for getting the server).
So if anyone around wht knows someone who has spare box for a week with 1000mbps uplink would be great.
Please note, no mysql is required, just simple apache, and no traffic, just 1 or 10 hits in the entire week.
I was told that there are some companies out there that provide universities free hosting, so if anyone is aware of such company do let me know please.
What kind of difference will I see between my server having a 10 vs. 100 vs. 1000 Mbps Uplink?
If I had to choose between 1000Mbps Uplink w/ 3000GB/mo BW or 10Mbps Uplink Unmetered, what should I take into consideration?
What will the impact to the customer be speedwise?
I recently purchased a new Dedi server, and got 100 MBPS Uplink. Now, I'm uploading 16GB size of files into this server, and I have a suspicious feeling that this upload speed is not what they told me. For the very 1st day, I opened a ticket and they said that they upgraded it to 100 mbps. I saw this speed was faster immediately. On 2nd day, it went down to around same slow speed before. Since then, I kept opening a new ticket and they said it was done, or sometimes I am under DDos attack..? What? I don't even have the site up yet! How come there is DDos attack?
Anyway, today I was told that I'm getting billed for this 100 mbps uplink, because it's a new service. What a crazy thing going on here... I am so tired of this ticket game and just don't understand why they don't commit what they told me initially.
Can anyone please tell me how I can verify and prove that I am having this 100 MBPS Uplink speed? The only thing I can tell with my eyes is that I can see those FTP upload progress bar. When it's very fast to upload one file, I assume that I have right speed.
But is there any tool or command that I can execute on the server shell, and tell them what I get as a proof?
I am curious if anyone knows what 1and1.com's uplink speed is for their shared accounts? A shared developer account get's 3TB of bandwidth. But I am wondering what type of bandwidth that is. How fast is it?
View 8 Replies View RelatedIs 100Mbps a lot better (10 times?) than 10Mbps uplink?
What does 100Mbps mean? 100M bits per second right? So 10M bytes per second, inclusive of both download and upload?
As per topic, what is the best method to do to the hardware to improve bandwidth / uplink speed of server?
I have a production server that is used for regular file serving.
P4 3.0Ghz
4GB RAM
500GB + 160GB + 160GB hard disk
2Mbps Dedicated + 10Mbps shared.
However, the most I can pulled through the whole server is always between 1.5Mbps - 3Mbps, anyway to pull the speed up to around 10Mbps should there be availability of bandwidth for me to burst?
For any informations, the hard disk is SATA 2.
Does anyone know of a private Data Center with Satellite uplink/downlink connectivity in addition to Fiber?
I know the government depends on them for military purposes, but I was wondering if anyone is aware of a private, FCC liscenced data center with the capability to transmite/host data via satellite in case of disasters, remoteness etc. It seems complimentary for a data center but I haven't heard of it.
Is there any market research on this? What is a good source of information to find out about how many data centers there are, how much revenue they bring in, costs, etc? What is the data center bible?
I'm runnung a server with Apache2 (Apache/2.2.16 (Debian 6.0))
I would like Apache2 listen on port 8080 for IPv4 and on port 80 for IPv6.
This is what I have now:
/etc/apache2/ports.conf
Currently I am using Linux + cPAnel and using the port 25 for email sevrer. Currently we facing 1 problem is, some user's ISP is not support port. May I know how can I add additional port into server and allow users to send mail by different port?
View 1 Replies View RelatedI have an office internal website and I opened a port in the gateway of my office (7080) to this website (server )'s 80 port. That makes this website open to public as office has static IP. And then when I view the site from home . it's fine. But when I tried to login, the site is using a pop-up, I guess it's http authentciation, login, I was redirected to a url without my port number any more, that stops my access to the site as obviously I would.
How can I keep my connection/port number ...?
about the NIC and switch,
there are giga port vs mega port,
in your experience,do they really be different?
I recently changed my SSH port, but locked myself out when my APF firewall was installed.
Where would I got to add a custom port inside the APF's config file?
I am using proftpd...How do i instruct that the server don't listen on high ports 49152-65534 but only to 21?
The reason is because my client's firewall setup is very strict and i need to give a good reason to open those high ports. Right now, i can ftp to port 21 only but can't do nothing more than that coz the higher ports are blocked.
i now have root access at a site i manage and the previous admin has set up a different SSH port.
I think this because i get " Connection Refused " and that user has access for SSH.
When restarting my SSH services i recive;
Quote:
sshd has failed, please contact the sysadmin.
And from looking that error up it means the port has been changed.
So i have WHMC access and all other root passwords etc, but how can i find out the port?
Bought New VPS recently , it suppose 10MB unmetered .. when Download Big files thru SSH , the Speed Never Exceed 2MB, always 2mb or less ..
i thought i get 10mb, from wht i understood when say 10mb unmteret ..
how to make sure if i'm on 10 mb unmetered or not .. i thought simple just download some big file from ssh and see wht speed ..
I have cpanel running on a centos box and I want to change the ssh port from (22) the default port to something new i get 13000 login add temps a day. How do i do this i have root access
View 11 Replies View Relatedis it safe to keep the port 111 open or what?
i'm using CentOS 4.x
I am having my ded server disconnected in less than 2 hours if I dont delete a bad website off my dedicated server (I run a free hosting website on it...i know! I know!)
Anyways I need to login to ROOT and manually take this website off the server, which I have NO IDEA how to do anyways, but I need the SSH port to do so and I HAVE NO IDEA what it is!
How do I find this information out?
I'm a bit new to this, and I wanted to host my server on a VPS. I tried connecting, but that just didn't work. Do I need to portforward the VPS? Sorry, Like I said, I'm a bit new.
View 6 Replies View RelatedI know this is a bit of an odd question but I have a VPS which has port 1189 open. Is it normal by default to have this port listening on a OpenVZ VPS under HyperVM? or is this something a little concerning? Never noticed it before, just checking I don't want any illegal applications being hosted on my server by clients.
It's most probably nothing to be concerned about, just wanted to double check.
I would like to know on how to forward specific IP with port to localhost or any IP by using iptables ? For example i would like to forward for port 25 from IP A to IP B, Currently i'm doing a test with my firewall and i'm very blur with iptables thingy.
View 2 Replies View Relatedwhat is port forwarding?
View 2 Replies View RelatedI have a script that needs to make a port 80 request to itself and it seems that there is something blocking that request. where should i look to correct this problem?
View 14 Replies View RelatedOK, This is killing me, can someone tell me how to unblock ports 7000-9000 in ConfigServer (CSF) for my whole server? I need them unblocked for WHMSonic, and all my admins are off for the weekend so I really need some help.
View 7 Replies View Related