Traceroute Broken
Jan 24, 2007
I have a problem with the traceroute for 72.36.229.84 . Some useres can reatch it, but not all.
I 've attaced 3 routes under that isn't working and 2 that work. Look at the routes that doesn't work, they all stop by gblx.net ( String 9 - 10) Working routes doesn't use gblex.net
My question : What should i do, what can i do ? Is gblex.net the problem ?
Not working route : emil@egenhost:~$ ping 72.36.229.84
PING 72.36.229.84 (72.36.229.84) 56(84) bytes of data...
View 2 Replies
ADVERTISEMENT
Jun 21, 2007
My server has been accessible in and out all day.
During these periods of inaccessibility, ping/traceroutes from multiple physical locations around the world show 50-100% packet loss.
During times when the server is accessible, ping times are anywhere from 100ms-700ms and the server does not remain accessible for very long.
I gave my provider traceroutes and pings for those times when it was inaccessible and accessible and they stated it was not on their side. It was on a hop in the middle between me (and apparently everyone else, since multiple locations around the world were used) and my server. They say it is not in their control and they cannot do anything about it.
I am reasonably sure this isn't just me or my VPS. I am on the phoenix node of PrimaryVPS.
The latest traceroute I did showed something new - a router advertisement claiming the TTL was exceeded....
View 3 Replies
View Related
Dec 31, 2006
I am still trying to diagnose a problem some members have on my forums, when they load a page it will load a grey screen (my background color) and stop, after 15-30 seconds+ it will finally load the page
i opened a ticket with my server co and they forwared it to the NOC, NOC said it was apache config problem, server co said it was fixed and was due to apache log reaching 2GB limit, logrotate installed
same problem still existed, opened tk with server management co, they tweaked httpd.conf and disabled logs, problem still exists
I asked 3rd management co about it, changed some settings in httpd, said it may be due to ads on the sites, i took out the ads and a stat script
problem still exists, the thing is the problem exists with some users and not others, doing speed tests to the server shows it is very quick, load is low, no i/o wait and i just installed the second GB of memory so memory is fine
this is happeneing to users on seperate forums, one using vB, one using IPB, so it is server/ hardware related, AMD barton 3000, with 2GB ram, nowehere reaching the bandwidth limit or 10mbps port speed limit
any ideas? doing tracerts to the server shows a timeout before the sites IP address, every time, but doing a tracert OUT of the server shows no time outs....
View 14 Replies
View Related
Dec 13, 2006
One of the other message boards that I am on has a server at LayeredTech.
Now they said in there they had no issues whatsoever with the network. But when I did this tracert: .....
View 8 Replies
View Related
Sep 28, 2007
I run tracroutes to many IPs often, anyoone could whip up a script to run traceroutes by entering IP and hitting enter and ability to cancel the process (as it gets stuck sometimes) and enter another IP to trace to?
View 6 Replies
View Related
Apr 7, 2008
When I try to do a traceroute from my home computer to my rented server, it doesn't end and lots of asterisks but I can reach my site ..........
View 7 Replies
View Related
Feb 6, 2007
When we do traceroute between 100 -130 ms delay between hop is acceptable? What is the maximum value can be acceptable?
View 2 Replies
View Related
Dec 13, 2007
We're looking to bring in a T3 for our small startup hosting company and when we do traces from multiple location it always runs through a cox.net IP and it concerns me because I dont want our customers to believe they're being hosted on some kids cablemodem. What do you folks suggest, the IP is 64.19.96.5 to their outer router. Should it be a concern that we route through everyone through a cox.net IP?
View 10 Replies
View Related
Nov 4, 2008
If I'm doing a traceroute on two IP addresses (different networks).
The one with the less hops means it's the fastest network from where I'm from? Right?
And is it (less number of hops) more important than lower ping time?
View 6 Replies
View Related
Aug 13, 2008
I installed net query tool from this site
http://virtech.org/tools/
They say in order for ping and trace to work, you must chmod those executables on the server itself to 755. Is this safe or a security risk? The odd thing is, ping and trace works fine from dnsstuff.com or any other network tool site.
What is the location of those executables?
View 2 Replies
View Related
Aug 3, 2007
I'm looking into knownhost and they offer twice the bandwidth in their California option for the same money. Jay from known host said I should pick the one with the best ping times. I'd like to put the information here so someone might perhaps tell me what my best choice is.
I'll put the stats here and then if you could tell me which one is better (Texas vs. California) that would be great.
But if you think that the times between the two are only marginal (both real good), then could you help me decide about getting double the bandwidth for the same price.
I know nothing of course, but the two data centers look like their both giving great speeds (Texas being better though). But perhaps both speeds are great. If that's the case, can anyone tell me why someone would not take the higher bandwidth offer?
Thanks, I really appreciate any help with this!
Here is the info...
Texas (ping):
PING 65.99.213.7 (65.99.213.7) 56(84) bytes of data.
64 bytes from 65.99.213.7: icmp_seq=1 ttl=56 time=1.26 ms
64 bytes from 65.99.213.7: icmp_seq=2 ttl=56 time=1.35 ms
64 bytes from 65.99.213.7: icmp_seq=3 ttl=56 time=1.41 ms
64 bytes from 65.99.213.7: icmp_seq=4 ttl=56 time=1.22 ms
64 bytes from 65.99.213.7: icmp_seq=5 ttl=56 time=1.51 ms .............
View 10 Replies
View Related
Oct 5, 2006
I was wondering if anyone out there knew of any programs out there that can monitor and record ping times to various server IP's and couple output say a simple graph. There used to be this website I used that you could simply go onto there site, and register, and put in your servers ip addresses and it would output a simple graph that showed latency, loss etc for any ip you put into there system and displayed a web based mrtg type graph. I am having some troubles at one of the datacenters that I have some co-located servers at, and would like to show them how much packet loss they are having at a given time, or over say a 24 hour period.
View 2 Replies
View Related
Jan 10, 2009
I'm looking to set up some custom monitoring stuff that ties into my existing systems, so that's why I'm not looking for established monitoring services.
I'm looking for a shared environment where I could ping and trace to my equipment, either from cron or a background daemon which I'd write in perl, python, etc.
I'd also want it located somewhere on the left coast or Texas.
Does anyone know any hosts that would meet the above?
View 1 Replies
View Related
Dec 18, 2007
I have waisted all not trying to get subversion working for apache 2.2.6 and in the process i have broken yum now to.
I did yum erase subversion, and now with every yum command i get:
Code:
(process:27490): GLib-CRITICAL **: file gtimer.c: line 106 (g_timer_stop): assertion `timer != NULL' failed
(process:27490): GLib-CRITICAL **: file gtimer.c: line 88 (g_timer_destroy): assertion `timer != NULL' failed
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in ?
yummain.main(sys.argv[1:])
File "/usr/share/yum-cli/yummain.py", line 97, in main
result, resultmsgs = do()
File "/usr/share/yum-cli/cli.py", line 512, in doCommands
ypl = self.returnPkgLists()
File "/usr/share/yum-cli/cli.py", line 1176, in returnPkgLists
ypl = self.doPackageLists(pkgnarrow=pkgnarrow)
File "__init__.py", line 885, in doPackageLists
File "/usr/share/yum-cli/cli.py", line 75, in doRepoSetup
self.doSackSetup(thisrepo=thisrepo)
File "__init__.py", line 260, in doSackSetup
File "repos.py", line 277, in populateSack
File "/usr/lib/python2.3/site-packages/sqlitecachec.py", line 40, in getPrimary
self.repoid))
TypeError: Can not create index on requires table: near "NOT": syntax error
I saw this too:
Code:
/sbin/ldconfig: /usr/lib/mysql/libmysqlclient.so.15 is not a symbolic link
I tried uninstalling and reinstall yum but that did not work.
View 8 Replies
View Related
May 26, 2007
I don't know how it got broken, it was working a couple days ago. When users click the fantastico icon in their cpanels, a page opens that says this:
Fantastico is not installed at the default location /usr/local/cpanel/3rdparty/fantastico. Either move the Fantastico directory from it's current location to /usr/local/cpanel/3rdparty/fantastico OR enable ioncube loaders in WHM -> Tweak settings.
I enabled the ioncube loaders and that didn't fix it. So then I reinstalled fantastico and it's still broken.
How do I troubleshoot?
View 6 Replies
View Related
Jul 24, 2008
I ran "yum update" on one of my servers, and it must've updated BIND, because now named doesn't start.
I basically hit all the problems in this thread:
[url]
This is CentOS4 with Plesk.
Even though I don't have that package installed, and tried every suggestion there, it still doesn't start... I mucked with the configs and moved so many files I don't know how to get back to where I started.
Quote:
Jul 24 05:08:06 www named: /etc/named.conf:67: open: /etc/rndc.key: file not found
What's my best bet for fixing this mess? I sent in an e-mail to two "server administration" companies I found in signatures here, hopefully one of them will be available today.
I changed the nameservers on critical domains to a free DNS service to get them back online, but they're acting oddly (like DB timeouts), perhaps because of the lack of a local nameserver to talk to.
But in the meantime is there anything I can do to try to fix this quick?
View 5 Replies
View Related
Jun 15, 2007
I'm trying to install some basic cpan modules to use ASSP with. On my other server, this all went without a hitch, but on this one (Centos), it it a pain. First off, every time I start up cpan, it's asking me to do some sort of reconfiguration..every time (running as root)...
Secondly, after I'm in the cpan shell, and I issue this:
install Compress::Zlib
I get a whole slew of errors, and ultimately, nothing is done...Here is the last portion of what is shown on the screen
Quote:
Global symbol "$gzerrno" requires explicit package name at t/14gzopen.t line 481.
Global symbol "$gzerrno" requires explicit package name at t/14gzopen.t line 499.
Global symbol "$gzerrno" requires explicit package name at t/14gzopen.t line 502.
Bareword "Compress::Zlib::zlib_version" not allowed while "strict subs" in use at t/14gzopen.t line 38.
Bareword "ZLIB_VERSION" not allowed while "strict subs" in use at t/14gzopen.t line 38.
Bareword "Z_FINISH" not allowed while "strict subs" in use at t/14gzopen.t line 98.
Bareword "Z_STREAM_END" not allowed while "strict subs" in use at t/14gzopen.t line 110.
Bareword "Z_STREAM_END" not allowed while "strict subs" in use at t/14gzopen.t line 111.
Bareword "Z_STREAM_ERROR" not allowed while "strict subs" in use at t/14gzopen.t line 446.
Bareword "Z_STREAM_ERROR" not allowed while "strict subs" in use at t/14gzopen.t line 461.
Execution of t/14gzopen.t aborted due to compilation errors.
# Looks like you planned 217 tests but only ran 2.
# Looks like your test died just after 2.
t/14gzopen......dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-217
Failed 217/217 tests, 0.00% okay
t/99pod.........skipped
all skipped: Test:od 1.00 required for testing POD
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/000prereq.t 4 1024 6 4 1 3-4 6
t/01version.t 255 65280 2 3 1-2
t/03zlib-v1.t 255 65280 394 785 1-394
t/05examples.t 255 65280 ?? ?? ??
t/06gzsetp.t 255 65280 ?? ?? ??
t/08encoding.t 255 65280 16 31 1-16
t/14gzopen.t 255 65280 217 432 1-217
1 test skipped.
Failed 7/8 test scripts. 633/635 subtests failed.
Files=8, Tests=635, 1 wallclock secs ( 0.72 cusr + 0.27 csys = 0.99 CPU)
Failed 7/8 test programs. 633/635 subtests failed.
make: *** [test_dynamic] Error 255
PMQS/Compress-Zlib-2.004.tar.gz
/usr/bin/make test -- NOT OK
Running make install
make test had returned bad status, won't install without force
Failed during this command:
PMQS/Compress-Raw-Zlib-2.004.tar.gz : make NO
PMQS/IO-Compress-Zlib-2.004.tar.gz : make_test NO
PMQS/Compress-Zlib-2.004.tar.gz : make_test NO
View 14 Replies
View Related
Aug 13, 2007
While creating a domain on Ensim I got this error:
Code:
Field Disk Quota (WARNING): Disk quota is either not enabled or not supported for virtual domain filesystems.
diskquota - Reconfigure service
(WARNING):Group quota is not enabled on the server. Not configuring quota for the site. Please fix your server's quota problem and edit the site again if you want to configure quota for the site
I'm using RHES 3 + Ensim Pro 4.1.0-8, i know maybe an
option would be upgrade to Ensim Pro X, but right now I can not do that, i need alternative solutions..
View 0 Replies
View Related
Nov 13, 2007
Fresh install of centos 5 / cpanel
I get this when ssh'ing in default port 22 / root
-bash: mail: command not found
-bash: echo: write error: Broken pipe
View 2 Replies
View Related
Jul 4, 2013
I got a trouble with a server upgrade on GoDaddy.
Once the server was upgraded from Apache 2.2 to Apache 2.4 all
View 1 Replies
View Related
Jul 23, 2014
Code:
# cat /root/.autoinstaller/microupdates.xml
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<patches>
<product id="plesk" version="11.0.9" installed-at="20121209T212320">
<patch version="62" timestamp="" installed-at="20140723T035123" />
</product>
</patches>
Minutes after this microupdate auto-installed, I am unable to login to POP and IMAP on this server. None of the accounts are able to login. The logs indicate hundreds of login failures, accompanying a new record I've never seen in these logs:
Code:
pop3d-ssl: Unexpected SSL connection shutdown.
Unfortunately, I can't find anything about what MU#62 actually included. The changelog only indicates up to MU#61, so I'm very concerned:URL....
I've googled the specific error I'm seeing above, but nothing appears to be remotely related to this problem.Is it possible to roll back the MU to determine if that is in fact the problem?
View 3 Replies
View Related
Aug 10, 2007
We had someone take a look at our server for security issues, and they believed that one way of keeping "hackers at bay" would be to write an sh wrapper that only allowed root access. Well, this immediately broke the system.
I have spent about six hours now attempting to fix this. We're using Red Hat Enterprise 4, and the recovery disc doesn't have the SCSI drivers we need to even mount the hard drive, so that's out. I can't skip initrd because it apparently contains the drivers for the hard drive, but it's also not allowing the system to boot up. I have tried setting kernel emergency in grub, but it still loads initrd and breaks. Without initrd, I get a kernel panic while mounting the hard drive. Annoyingly enough, doing cat initrd-version.img at the grub prompt shows the file just fine, so why is initrd required for mounting the drive if it's already accessible? Also, it doesn't look like there's any way to edit initrd from grub, which is a real pain in the head because I could always comment out the offending lines. And of course, even though I can see the initrd file, I can't do anything else with the file system. I have requested of the data center to provide a boot disc that can mount the hard drive, and if that can be done, then I can go in and make the changes immediately and hope that it works, but without that, it seems I'm stuck. Any suggestions?
When I say "broken", what happens is I get "Out of memory: Killed process x (procname)" which then repeats itself infinitely, killing any process which would load.
The data center says that they HAVE no boot discs capable of mounting the hard drive. This is utterly ridiculous, because the only option from here is to order the expensive OS reload. I'll never use Red Hat again.
View 3 Replies
View Related
Dec 26, 2007
My server (Fedora Core V and Plesk 8) hard disk broke 2 days ago and my bakckup tar.gz is too old.
Datacenter (fdcservers.net) tried to put old harddisk as slave but server is not recognising the old drive. Datacenter say that can not do anything more.
My question:
Is there any software or company that can recovery my harddisk data?
My last 6 months work is gone now.
View 5 Replies
View Related
May 18, 2015
Following the update from 11 to Plesk 12 (and installing latest Ubuntu fixes), the Plesk panel access is broken. Welcome page says:Can not load key: key is empty.And of course, no way to login the mgt interface. All services appear up, so this is only affecting the panel web service.
Fishing out the panel.log, it appears to be at a lower level than I initially thought (see below): experiencing issues after updating from 11 to 12 on Ubuntu (12)?
[18-May-2015 19:46:34 Europe/Berlin] PHP Warning: file_get_contents(/opt/psa/var/sso.sp.pem): failed to open stream: No such file or directory; File: /opt/psa/admin/externals/xmlseclibs.php, Line: 285
[18-May-2015 19:46:34 Europe/Berlin] Exception: PHP Warning: file_get_contents(/opt/psa/var/sso.sp.pem): failed to open stream: No such file or directory; File: /opt/psa/admin/externals/xmlseclibs.php, Line: 285
file: /opt/psa/admin/plib/Smb/Exception/Syntax.php
line: 56
[code]..
View 5 Replies
View Related
Apr 12, 2015
httpd fails to start after bootstrap. Log file below.
Warning: web server configuration is broken. We will try to repair it. This operation can take a lot of time, please do not interrupt the process.
Unable to rebuild web server configuration, possible there are broken domains
Trying to reconfigure web-server configurations skipping broken domains... Execution failed.
Command: httpdmng
Arguments: Array
(
[0] => --reconfigure-server
[1] => -no-restart
[2] => -service-node
[3] => local
)
[Code] ....
View 5 Replies
View Related
Dec 11, 2014
System:
Parallels Plesk v12.0.18_build1200140610.21 os_Ubuntu 14.04
Symptoms:
Whenever I click "File Sharing" in Plesk, I get the following error and no content is visible:
Internal error: Error in cURL request: IPv6 numerical address used in URL without bracketsClick to expand...
View 7 Replies
View Related
Feb 17, 2014
Updates ran over the weekend and I can no longer login to the Plesk Panel. I'm getting the following PHP error: Fatal error: Call to undefined function get_gpc() in D:Plesadminhtdocsindex.php on line 3Click to expand...
View 1 Replies
View Related
Jul 8, 2014
Unfortunately the encrypted FTP transfer is broken since Plesk upgraded to version 12. There are two cases:
Passiv FTP without encryption on port 21: everthing workes fine.
Passiv FTP with explicite TLS encryption on port 21: The control connection can be established by using TLS on port 21 but the data transfer can't be established by using passive mode (ETIMEDOUT - Connection attempt timed out)
I thought it could be a firewall issue but i'm currently unable to diable the firwall for testing since the configuration of the firewall is unreachable after upgrading to plesk 12! See second thread:URL....
View 2 Replies
View Related
May 29, 2008
I've a dedicated server at ThePlanet / Servermatrix for the past few years and for the most part the service has been okay. Uptime has been good and support used to be fairly swift.
Early wednesday morning the primary hard drive in my server started dying. Throughout the day various services kept going up and down and overall the entire server was very unstable. I didn't get much movement from ThePlanet's support team - they would reboot the server, SSH and other services would come back online, and so they would close the ticket.
Thirty minutes after the reboot the HD would switch to read-only and stuff would start dying. So they finally recommended that I replace the HD and do an OS reload. I said fine as I had a backup of all of the accounts on a 2nd hard drive.
Well it took until 6am this morning for the OS reload to finally be completed, but when it was done apache was *completely* screwed up. WHM was up and running but if you went to the server IP address in the browser you got an error.
It turns out that something really badly went wrong with the OS reload but it took them hours before they even admitted that there was something wrong that needed more action. It's now 10pm and while email and other services are up, apache is still nonexistent.
When I try to run easyapache it barely starts before it errors out with a bunch of missing dependencies. I cannot instal GD and a bunch of other items, and I keep getting error messages that SSL isn't installed either.
Please visit [url] for help with this error.!
No original working apache backup to restore!
Executing '/scripts/initfpsuexec'!
Executing '/scripts/initsslhttpd'!
Compiling report...
Sending report (6304 bytes)...
If you want to create a support ticket with cPanel regarding this please reference 'BuildAP Report Id': '741873'!
Report processed.
Verbose logfile is at '/usr/local/cpanel/logs/easy/apache/build.1212079281'
----
seems the yum repo being used has bad files:
Error: Missing Dependency: zlib = 1.2.3-0 is needed by package zlib-devel
Error: Missing Dependency: libjpeg = 6b-0 is needed by package libjpeg-devel
--- -0 isn't a normal package id.
I can't even transfer my accounts off the server as that's also broken - I was going to all of the accounts off to my KnownHost VPS but I keep getting an authentication error ("sshcmdpermissiondeny") even though I'm definitely entering the correct root password.
View 1 Replies
View Related
