TYAN S2895A2NRF Cpu Retention Modules
Oct 8, 2007If you know where to buy those modules, please let me know.
View 3 Replies
ADVERTISEMENT
WHM Back Up Retention
Oct 29, 2008how the backup in WHM works as far as data retention. For example, if I select the "daily backup" option, does
- WHM create a new backup for each day every day moving foward until the drive it uses is filled up, OR
- WHM creates a backup for each day of the week, overwriting the previous week's same day data.
Tyan Vs Supermicro
Aug 10, 2009I've been having a look at a lot of boards and Tyan seem to be beating Supermicro in terms of range at scan.co.uk
I've seen some unique features with Supermicro such as Remote KVM and such built into the motherboard, but it only seems to be with the very pricey series unless I'm looking in the wrong direction
Anybody have any thoughts to share about which is the better manufacturer?
Centos On Tyan Transport GT20
Apr 10, 2009Server Tyan Transport GT20 B5151
CPU P4 3.0GHZ HyperThreaded
memory 2GB Kingston RAM DDR400
3 hardisks 250 gb, 2 for raid, 1 spare
it seems very hard to install centos on this box, i cannot figure out how to do.
i used a network install, and first of all the grub loader gave an error.
i used all standard procedures for install.
i think its the raid controller messing up with it.
does somebody know or already has used such system with hardware raid controller and one spare hdd to install centos?
Tyan Toledo I3210w (S5211)
Mar 7, 2008Does any one try this mainboard?
I want to install CentOS 4.6 (x86_64), but most of ICH9R or ICH9 desktop board is not support CentOS 4.6.
If you are try it before, can you share your experience with me?
Tyan B5161 + M3291 IPMI
Mar 10, 2007I have here 3 servers of Tyan with M3291 IPMI boards installed. I hooked it up as per instructions of Tyan, but am unable to get it to work.
I have tried contacting Tyan about this, but after a few messages they stopped responding to my questions. I think they are convinced it is working with me....
The setup is;
- Ubuntu 6.1 x86_64
- System BIOS is the original version
- IPMI card is flashed with the correct firmware
- The network port which is shared with the IPMI card has a different IP address then the IPMI card.
Settings IPMI card:
box:~# ./uh8l -d
BMC Utility on Linux For M3291 version 0.9.1
Copyright 2003-2006 TYAN Computer Corp.
IPMI Ver: 2.0 Firmware Rev: 0.11 Vendor ID: 6653 Pdt ID: 5161
DHCP Disable
BMC IP Address: 10.0.1.102
MAC Address: 00:E0:81:42:4C:51
Net Mask: 255.255.255.0
Gate Way: 10.0.1.253
Broadcast ARP: Enable
This server has on the IPMI shared port the address 10.0.1.2 ...
When I try to ping the IPMI board from the server itself or from a different server I get an incomplete address in the ARP table;
? (10.0.1.102) at <incomplete> on eth2
(Also after pinging it for 1 minute...)
If I use the IPMI utilities I am unable to contact the board and do anything with the server....
I tried several settings of the IPMI board, including DHCP / ARP on and off...
Does anyone have this combination working, and how did you do this?
Tyan Motherboard With Supermicro Case
Jun 3, 2007I purchased a Tyan S3970 (Tomcat h1000e) motherboard with a Supermicro SC820 Case, 'cuz I got a good deal on the combo. After I purchased it I realized that the back-cover does not match up, and the connector wires are short. (ie. The NIC/power LED wires do not reach the connector). Does anyone have a solution to this problem.
View 0 Replies View RelatedParts To Fit Tyan Mboard And Supermicro Case
Jul 2, 2007I got a good deal on the Supermicro SC822T-R550LPB case, and then bought a Tyan Motherboard(S3970).
Unfortunately, the IO shield that comes w/the board does not fit the case, and the one from the case does not fit the mboard. A set of FAN cables do not reach the mboard either. Does anyone know of any place that sells these parts?
Ipt Modules For CSF
Jul 4, 2009I got a problem with CSF on my VPS. ipt_state and ipt_REDIRECT are not enabled on the node and I can't(and everyone else on the node) be using any ipt based firewall.
I asked a hosting company to enable those modules and I provided a simple guide(Edit /etc/sysconfig/iptables-config and /etc/sysconfig/vz on the hardware node. Add ipt_state and ipt_REDIRECT into IPTABLES_MODULES= and IPTABLES= lines correspondingly.)
I had the same problem on my old VPS provider and I provided the same guide and after it they restarted iptables and vz and it worked fine.
Tech in my current hosting company is saying they need to re-compile the kernel with those modules 1st in order to enabled those modules. They tried 2 times and the server didn't boot into a new kernel.
So, is there any other way to enable those modules without kernel re-compile.
I even think "modprobe" shout do the trick. modprobe ipt_state and modprobe ipt_REDITECT and then add those modules into 2 files as I said above and it whould be working fine?
New Xen VPS Lacks Modules
May 2, 2008CentOS 5. I can't run iptables.
/lib/modules is empty.
In /var/log/messages, this line is repeated many times:
modprobe: FATAL: Could not load /lib/modules/2.6.18-5-xen-686/modules.dep: No such file or directory
iptables -L gives this:
iptables v1.3.5: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
Is this something I can fix via yum install xxx or some other way, or is it something my provider has to do?
I tried yum install kernel-xen, but that installed 2.6.18-53 and modprobe is looking for 2.6.18-5
Apache Modules
Oct 10, 2007On a Linux box, is there a way to list all of the modules that are running in Apache but NOT compiled into Apache?
I now that "httpd -l" = lists all of the Apache compiled modules.
Pear Modules
Sep 9, 2007Trying to install Cerberus Help Desk and it gives this message during requirement check:
The following problems prevent you from running Cerberus Helpdesk 4.0:
upload_tmp_dir is empty in your php.ini file. Please set it.
The 'MailParse' PHP extension is required. Please enable it.
The 'Mail' PEAR package is required. Please install it.
The 'Mail_Mime' PEAR package is required. Please install it.
The 'Mail_mimeDecode' PEAR package is required. Please install it.
The 'Mail_RFC822' PEAR package is required. Please install it.
The 'Text_Password' PEAR package is required. Please install it.
how to apply this (on a vps) safely? Using Centos 4.5. I'm using Interworx control panel.
Removing Apache Modules
Apr 17, 2009I have a RHEL 5 server, that host one site with a common PHP 5.x -MySQL 5.x app, it also uses .htaccess to rewrite rules. I'm trying to optimize apache to the max, and though about removing some unneccesary modules. The actual modules loaded are:
Code:
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_alias_module modules/mod_authn_alias.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule expires_module modules/mod_expires.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule info_module modules/mod_info.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule cache_module modules/mod_cache.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule version_module modules/mod_version.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule evasive20_module /usr/lib/httpd/modules/mod_evasive20.so
LoadModule security_module /usr/lib/httpd/modules/mod_security.so
Besides of mod_evasive, mod_security that are security modules, what modules can I disable without causing any problems to a common PHP-MySQL website?
This is a plain RH box, virtual host is configured at httpd.conf in this way:
Code:
<VirtualHost SERVERIP>
ServerName mysite.com
ServerAlias www.mysite.com
DocumentRoot /var/www/sites/mysite.com
<Directory "/var/www/sites/mysite.com">
Options FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>
RewriteEngine on
RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK)
RewriteRule .* - [F]
</VirtualHost>
Enabling Iptables Modules
Nov 2, 2009This wiki page has discussed how to enable iptables modules in a VPS.
View 6 Replies View RelatedInstall Modules Of Iptables
Mar 6, 2008I want to know about install IPTables modules -> modules name is 'Quota'
It's have way to install pure this modules directly to IPTables by not Build/ReBuild Kernel from Source
OS : CentOS 5.0
I must Mod Quota to IPTables for use Traffic Limit per VPS Node on OpenVZ Kernel
And everyone can tell me to simple to Traffic Control for VPS Node on OpenVZ
Perl Modules Not Found
Sep 16, 2007to install these two but whm did not find them
html2ps
ps2pdf
Only found this,
Meta::Tool:s2Pdf
not sure if that is the proper one anyway.
Using perl 5.8.8 / centos 4.5
Apache :: Several Modules Missing Or Different Name
Jun 2, 2014I'm trying to install the Win32 dist from apachelounge 2.4.9 and I'm having difficulties getting the modules loaded. Several modules have different names or aren't there at all. mod_imap.so
View 1 Replies View RelatedHow To Add Apache Load Modules
Feb 11, 2013I have complied Apache from the source with so enabled and compiled PHP with Apache apxs. What if I do, if I want to add/Load another modules as a dynamic modules without recompiling apache. Suppose if I want to enable rewrite or any other module.I am pasting the command which I used to compile apahce.
Apache
==
./configure --prefix=/usr/local/apache --enable-module=so
make
make install
PHP
==
./configure --prefix=/usr/local/php --with-apxs2=/usr/local/apache/bin/apxs
make
make install
Both are running fine on my server,how to enable mod rewrite module as shared module fro example ??Â
Performance » Deciding On Apache Modules To Use
Jul 30, 2008what modules I should use in my httpd.conf file. Here's the modules that I currently have enabled / disabled. The site is running specifically off PHP. There is no need for CGI, ASP, or any other languages (to my knowledge). The negotiation module is enabled,. It does not need to be to my knowledge.
However, when I disabled it Apache would not restart. Could someone give some details as to which directives need to be disabled for negotiation to be disabled. Also, does anyone know if negotiation is essential. It is not to my knowledge. Suggestions and comments are much appreciated. Thank you in advance for your hard work and experience being as it's not costing me anything. I will do my best to return the favor.
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
LoadModule auth_anon_module modules/mod_auth_anon.so
LoadModule auth_dbm_module modules/mod_auth_dbm.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule auth_ldap_module modules/mod_auth_ldap.so
# LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imap_module modules/mod_imap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
# LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule cache_module modules/mod_cache.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
# LoadModule cgi_module modules/mod_cgi.so
LoadModule logio_module /usr/lib/httpd/modules/mod_logio.so
SELinux Is Preventing Apache/PHP From Loading Modules
Jul 28, 2008I can't get SELinux to let httpd load the IonCube module for PHP. I've given the CentOS 5 forum a try (here: http://www.centos.org/modules/newbb/...15403&forum=42), talked with WHMCS's support (the app I'm using that needs it), and even opened a ticket with IonCube. Unfortunately nobody seems to know how to tell SELinux to let httpd "exec" modules.
I'm running CentOS 5, and the error I'm getting in /var/log/messages is:
Jul 23 10:15:30 host kernel: audit(1216833330.905:1249): avc: denied { execheap } for pid=22055 comm="httpd" scontext=root:system_r:httpd_t:s0 tcontext=root:system_r:httpd_t:s0 tclass=process
I can disable SELinux and it works fine (setenforce 0), but that's not the solution I'm looking for. Can someone please tell me how to do this the *right* way?
Which Standard Modules To Be Installed On Your Dedicated Server
Jul 23, 2008what are the standard modules which you normally need to get installed in your server or which you install ? from which you sell hosting to your customer or Which standard modules Is Most Important To Be Installed In Your Dedicated server ?
View 3 Replies View RelatedQuestion To Hosts About PHP Configuration. Do Most Servers Have The Following Modules
Apr 25, 2007This is a random question and I wasn't sure exactly where to start. But, I have developed some invoice software that use a few PHP modules. My host has these enabled by default, but I wanted to see if most hosts have these enabled or not. Heck, they might even by standard php configuration, I'm just not sure. Here they are:
PHP 5 with the following modules:
- dom
- dom-xslt
- gd
- mysql
- mbstring
- bcmath
Apache :: Identity Modules Compiled For RHEL
Apr 26, 2014I have 2.4.x version installed on RHEL and I need to install same version on Solaris 10. How can I find out what packages/modules were compiled for RHEL so that I can download same for Solaris and compile them.
View 2 Replies View RelatedIPTables Rule Using Modules Limit & Length Simoultaneously
Apr 4, 2009I am currently trying to limit incoming UDP length 20 packets on a per IP basis to 5 a second using IPTables on a Linux machine (CentOS 5.2).
Basically, if an IP is sending more than 5 length 20 UDP packet a second to the local machine, I would like the machine to drop the excess length 20 packets coming from that IP.
The modules that should work perfectly for this type of "rule set" are;
- Limiting module
- Length module
Both of which are installed / compiled with the kernel/IPTables correctly and functioning.
I have tried several rule sets, and they all seem to not fully work. Either they drop all UDP length 20 packets going to the local machine or allow all them through.
Below is one of the rule sets I use, and it is not working. Any ideas what the issue could be?
iptables -N UDPC1
iptables -A INPUT -p udp -m length --length 20 -j UDPC1
iptables -A UDPC1 -p udp -m length --length 20 -m limit --limit 5/second -j ACCEPT
iptables -A UDPC1 -j DROP
Apache :: Reverse Proxy Modules - Error Reading Status Line From Remote Server
Oct 17, 2013We have been using Apache 2.2.x with reverse proxy modules for our clients to access their OWA servers for over a year. I want to get us to Apache 2.4.x so I setup a test box with latest 2.4 on it. I fixed the config file issues since 2.4 has changes in it. OWA proxy is working on my test server with Apache 2.4. But with 2.4 I do have an issue I cannot figure out. Note that this does NOT occur with Apache 2.2. I get the following errors when using ActiveSync through reverse proxy:
[Thu Oct 17 12:19:11.670665 2013] [proxy_http:error] [pid 748:tid 8440] (OS 10060)A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. : [client x.x.x.x:20311] AH01102: error reading status line from remote server mail.nameredacted.net:443
[Thu Oct 17 12:19:11.670665 2013] [proxy:error] [pid 748:tid 8440] [client x.x.x.x:20311] AH00898: Error reading from remote server returned by /Microsoft-Server-ActiveSync
So somehow with Apache 2.4 there is some sort of timeout that was not there with 2.2.