Perl Modules Not Found
Sep 16, 2007to install these two but whm did not find them
html2ps
ps2pdf
Only found this,
Meta::Tool:s2Pdf
not sure if that is the proper one anyway.
Using perl 5.8.8 / centos 4.5
ADVERTISEMENT
CPanel Checkperlmodules Prerequisite Perl Module Not Found (outdated)
Sep 2, 2007i had 3 emails last night from my box regarding a [checkperlmodules] automatic upgrade.
The modules cannot install as the modules on my system are outdated. I tried installing the module under WHM, IO::Compress::Base, but it says it is the most recent (2.005) and wont upgrade!
Under WHM -> 'Update System Software' i get the same error as modules wont build as they are require 2.006 and i have 2.005.
Is there anywayy how can i force an upgrade regardles?
Warning: prerequisite IO::Compress::Base 2.006 not found. We have 2.005.
[checkperlmodules] The perl module IO::Uncompress::Gunzip could not be installed.
This module is required by cPanel, and the system may not function correctly until it is installed, and functional. Below is the results of the auto-install attempt:
Test Run
==============
IO::Compress::Base::Common version 2.006 required--this is only version 2.005 at /usr/lib/perl5/site_perl/5.8.8/IO/Uncompress/RawInflate.pm line 9.
BEGIN failed--compilation aborted at /usr/lib/perl5/site_perl/5.8.8/IO/Uncompress/RawInflate.pm line 9.
Compilation failed in require at /usr/lib/perl5/site_perl/5.8.8/IO/Uncompress/Gunzip.pm line 12.
BEGIN failed--compilation aborted at /usr/lib/perl5/site_perl/5.8.8/IO/Uncompress/Gunzip.pm line 12.
Compilation failed in require at - line 1.
BEGIN failed--compilation aborted at - line 1.
Installer Run
.... snip ....
CPAN.pm: Going to build P/PM/PMQS/IO-Compress-Zlib-2.006.tar.gz
Up/Downgrade not needed.
Checking if your kit is complete...
Looks good
Warning: prerequisite IO::Compress::Base 2.006 not found. We have 2.005.
Warning: prerequisite IO::Uncompress::Base 2.006 not found. We have 2.005.
Writing Makefile for IO::Compress::Zlib
CPAN: YAML loaded ok (v0.65)
... snip ...
Ipt Modules For CSF
Jul 4, 2009I got a problem with CSF on my VPS. ipt_state and ipt_REDIRECT are not enabled on the node and I can't(and everyone else on the node) be using any ipt based firewall.
I asked a hosting company to enable those modules and I provided a simple guide(Edit /etc/sysconfig/iptables-config and /etc/sysconfig/vz on the hardware node. Add ipt_state and ipt_REDIRECT into IPTABLES_MODULES= and IPTABLES= lines correspondingly.)
I had the same problem on my old VPS provider and I provided the same guide and after it they restarted iptables and vz and it worked fine.
Tech in my current hosting company is saying they need to re-compile the kernel with those modules 1st in order to enabled those modules. They tried 2 times and the server didn't boot into a new kernel.
So, is there any other way to enable those modules without kernel re-compile.
I even think "modprobe" shout do the trick. modprobe ipt_state and modprobe ipt_REDITECT and then add those modules into 2 files as I said above and it whould be working fine?
New Xen VPS Lacks Modules
May 2, 2008CentOS 5. I can't run iptables.
/lib/modules is empty.
In /var/log/messages, this line is repeated many times:
modprobe: FATAL: Could not load /lib/modules/2.6.18-5-xen-686/modules.dep: No such file or directory
iptables -L gives this:
iptables v1.3.5: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
Is this something I can fix via yum install xxx or some other way, or is it something my provider has to do?
I tried yum install kernel-xen, but that installed 2.6.18-53 and modprobe is looking for 2.6.18-5
Apache Modules
Oct 10, 2007On a Linux box, is there a way to list all of the modules that are running in Apache but NOT compiled into Apache?
I now that "httpd -l" = lists all of the Apache compiled modules.
Pear Modules
Sep 9, 2007Trying to install Cerberus Help Desk and it gives this message during requirement check:
The following problems prevent you from running Cerberus Helpdesk 4.0:
upload_tmp_dir is empty in your php.ini file. Please set it.
The 'MailParse' PHP extension is required. Please enable it.
The 'Mail' PEAR package is required. Please install it.
The 'Mail_Mime' PEAR package is required. Please install it.
The 'Mail_mimeDecode' PEAR package is required. Please install it.
The 'Mail_RFC822' PEAR package is required. Please install it.
The 'Text_Password' PEAR package is required. Please install it.
how to apply this (on a vps) safely? Using Centos 4.5. I'm using Interworx control panel.
Removing Apache Modules
Apr 17, 2009I have a RHEL 5 server, that host one site with a common PHP 5.x -MySQL 5.x app, it also uses .htaccess to rewrite rules. I'm trying to optimize apache to the max, and though about removing some unneccesary modules. The actual modules loaded are:
Code:
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_alias_module modules/mod_authn_alias.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule expires_module modules/mod_expires.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule info_module modules/mod_info.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule cache_module modules/mod_cache.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule cgi_module modules/mod_cgi.so
LoadModule version_module modules/mod_version.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule evasive20_module /usr/lib/httpd/modules/mod_evasive20.so
LoadModule security_module /usr/lib/httpd/modules/mod_security.so
Besides of mod_evasive, mod_security that are security modules, what modules can I disable without causing any problems to a common PHP-MySQL website?
This is a plain RH box, virtual host is configured at httpd.conf in this way:
Code:
<VirtualHost SERVERIP>
ServerName mysite.com
ServerAlias www.mysite.com
DocumentRoot /var/www/sites/mysite.com
<Directory "/var/www/sites/mysite.com">
Options FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>
RewriteEngine on
RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK)
RewriteRule .* - [F]
</VirtualHost>
Enabling Iptables Modules
Nov 2, 2009This wiki page has discussed how to enable iptables modules in a VPS.
View 6 Replies View RelatedInstall Modules Of Iptables
Mar 6, 2008I want to know about install IPTables modules -> modules name is 'Quota'
It's have way to install pure this modules directly to IPTables by not Build/ReBuild Kernel from Source
OS : CentOS 5.0
I must Mod Quota to IPTables for use Traffic Limit per VPS Node on OpenVZ Kernel
And everyone can tell me to simple to Traffic Control for VPS Node on OpenVZ
Apache :: Several Modules Missing Or Different Name
Jun 2, 2014I'm trying to install the Win32 dist from apachelounge 2.4.9 and I'm having difficulties getting the modules loaded. Several modules have different names or aren't there at all. mod_imap.so
View 1 Replies View RelatedHow To Add Apache Load Modules
Feb 11, 2013I have complied Apache from the source with so enabled and compiled PHP with Apache apxs. What if I do, if I want to add/Load another modules as a dynamic modules without recompiling apache. Suppose if I want to enable rewrite or any other module.I am pasting the command which I used to compile apahce.
Apache
==
./configure --prefix=/usr/local/apache --enable-module=so
make
make install
PHP
==
./configure --prefix=/usr/local/php --with-apxs2=/usr/local/apache/bin/apxs
make
make install
Both are running fine on my server,how to enable mod rewrite module as shared module fro example ??Â
TYAN S2895A2NRF Cpu Retention Modules
Oct 8, 2007If you know where to buy those modules, please let me know.
View 3 Replies View RelatedPerformance » Deciding On Apache Modules To Use
Jul 30, 2008what modules I should use in my httpd.conf file. Here's the modules that I currently have enabled / disabled. The site is running specifically off PHP. There is no need for CGI, ASP, or any other languages (to my knowledge). The negotiation module is enabled,. It does not need to be to my knowledge.
However, when I disabled it Apache would not restart. Could someone give some details as to which directives need to be disabled for negotiation to be disabled. Also, does anyone know if negotiation is essential. It is not to my knowledge. Suggestions and comments are much appreciated. Thank you in advance for your hard work and experience being as it's not costing me anything. I will do my best to return the favor.
LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
LoadModule auth_anon_module modules/mod_auth_anon.so
LoadModule auth_dbm_module modules/mod_auth_dbm.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule auth_ldap_module modules/mod_auth_ldap.so
# LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imap_module modules/mod_imap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
# LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule cache_module modules/mod_cache.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
# LoadModule cgi_module modules/mod_cgi.so
LoadModule logio_module /usr/lib/httpd/modules/mod_logio.so
SELinux Is Preventing Apache/PHP From Loading Modules
Jul 28, 2008I can't get SELinux to let httpd load the IonCube module for PHP. I've given the CentOS 5 forum a try (here: http://www.centos.org/modules/newbb/...15403&forum=42), talked with WHMCS's support (the app I'm using that needs it), and even opened a ticket with IonCube. Unfortunately nobody seems to know how to tell SELinux to let httpd "exec" modules.
I'm running CentOS 5, and the error I'm getting in /var/log/messages is:
Jul 23 10:15:30 host kernel: audit(1216833330.905:1249): avc: denied { execheap } for pid=22055 comm="httpd" scontext=root:system_r:httpd_t:s0 tcontext=root:system_r:httpd_t:s0 tclass=process
I can disable SELinux and it works fine (setenforce 0), but that's not the solution I'm looking for. Can someone please tell me how to do this the *right* way?
Which Standard Modules To Be Installed On Your Dedicated Server
Jul 23, 2008what are the standard modules which you normally need to get installed in your server or which you install ? from which you sell hosting to your customer or Which standard modules Is Most Important To Be Installed In Your Dedicated server ?
View 3 Replies View RelatedQuestion To Hosts About PHP Configuration. Do Most Servers Have The Following Modules
Apr 25, 2007This is a random question and I wasn't sure exactly where to start. But, I have developed some invoice software that use a few PHP modules. My host has these enabled by default, but I wanted to see if most hosts have these enabled or not. Heck, they might even by standard php configuration, I'm just not sure. Here they are:
PHP 5 with the following modules:
- dom
- dom-xslt
- gd
- mysql
- mbstring
- bcmath
Apache :: Identity Modules Compiled For RHEL
Apr 26, 2014I have 2.4.x version installed on RHEL and I need to install same version on Solaris 10. How can I find out what packages/modules were compiled for RHEL so that I can download same for Solaris and compile them.
View 2 Replies View RelatedIPTables Rule Using Modules Limit & Length Simoultaneously
Apr 4, 2009I am currently trying to limit incoming UDP length 20 packets on a per IP basis to 5 a second using IPTables on a Linux machine (CentOS 5.2).
Basically, if an IP is sending more than 5 length 20 UDP packet a second to the local machine, I would like the machine to drop the excess length 20 packets coming from that IP.
The modules that should work perfectly for this type of "rule set" are;
- Limiting module
- Length module
Both of which are installed / compiled with the kernel/IPTables correctly and functioning.
I have tried several rule sets, and they all seem to not fully work. Either they drop all UDP length 20 packets going to the local machine or allow all them through.
Below is one of the rule sets I use, and it is not working. Any ideas what the issue could be?
iptables -N UDPC1
iptables -A INPUT -p udp -m length --length 20 -j UDPC1
iptables -A UDPC1 -p udp -m length --length 20 -m limit --limit 5/second -j ACCEPT
iptables -A UDPC1 -j DROP
Apache :: Reverse Proxy Modules - Error Reading Status Line From Remote Server
Oct 17, 2013We have been using Apache 2.2.x with reverse proxy modules for our clients to access their OWA servers for over a year. I want to get us to Apache 2.4.x so I setup a test box with latest 2.4 on it. I fixed the config file issues since 2.4 has changes in it. OWA proxy is working on my test server with Apache 2.4. But with 2.4 I do have an issue I cannot figure out. Note that this does NOT occur with Apache 2.2. I get the following errors when using ActiveSync through reverse proxy:
[Thu Oct 17 12:19:11.670665 2013] [proxy_http:error] [pid 748:tid 8440] (OS 10060)A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond. : [client x.x.x.x:20311] AH01102: error reading status line from remote server mail.nameredacted.net:443
[Thu Oct 17 12:19:11.670665 2013] [proxy:error] [pid 748:tid 8440] [client x.x.x.x:20311] AH00898: Error reading from remote server returned by /Microsoft-Server-ActiveSync
So somehow with Apache 2.4 there is some sort of timeout that was not there with 2.2.
/usr/bin/perl -w Hnc.cgi
Dec 5, 2008When i was running top -cd2 command following scripts are taking high cup uses on server. But when we are go home directory we didn't find any thing.
24489 "User Name" 20 0 6732 5084 1164 S 8.0 0.2 11:00.69 /usr/bin/perl -w hnc.cgi
26456 "User Name" 20 0 6876 5080 1164 S 8.0 0.2 7:23.47 /usr/bin/perl -w hnc.cgi
32569 "User Name" 20 0 6748 5056 1164 S 7.5 0.2 8:57.30 /usr/bin/perl -w hnc.cgi
update us why this script are running under some particular users and what the application of this script.
Perl
May 16, 2007I have a website is written by Perl language. I donnt know how to run it.
I installed Activeperl 5.0 and IIS is running. I have heared someone who told me that need to install a software as Emperl/ html-emperl, is it right?
How To Install Perl
Jul 7, 2009How do you install perl on a centos 5?
View 3 Replies View RelatedPerl Symlink
Aug 15, 2008i have big problem all Forums in my server hacked by perl symlink see all config.php by shell perl in .txt by include
i solve it by make perl permission 000 but all thing in cpanel stop cause cpanel by perl
Perl Removed
Feb 2, 2008A client's server's password was guessed, and the hacker conveniently uninstalled perl. I can't seem to get perl reinstalled. Any ideas on how this would be done? RPM, TAR's and YUM don't work, as they require perl!
Is this going to be a reinstall job?
How To Secure Perl
Mar 28, 2008all we know that perl language its using in alot of scripts and alot of system admins stop it why this why u dont try stopp the problems from it and make ur client have perl to used it in scripts lets try this if some one need to see passwd he will do cat /etc/passwd what about make this chmod 700 /bin/cat and he will used wget to get files what about this chmod 700 /usr/bin/wget and lynx what about chmod 700 /usr/bin/lynx in this case we make root only can using this commands any system admin sure know now the idea and he can use it as he want ,, this secured method not only in perl its in another programing language put i give this as a clear exampel.
View 5 Replies View RelatedOld Version Of Perl
Mar 12, 2008I have a Centos VPS with Cpanel. I have begun receiving some email notifications, apparantly from my cpanel... The latest one says that the version of perl I am running is too old.
Subj: [checkperlmodules] perl version too old (v5.8.8 required, v5.8.7 is installed.)
Are there any problems or dire consequences from upgrading or side effects? What version should I upgrade to?
Perl Error
Jul 29, 2007I've been trying to figure this out for about the past week and haven't had any success.
Can't locate funcs.pl in @INC (@INC contains: lib/perl . /usr/lib/perl5/5.8.8/i686-linux /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i686-linux /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl/5.8.4 /usr/lib/perl5/site_perl/5.8.3 /usr/lib/perl5/site_perl/5.8.2 /usr/lib/perl5/site_perl/5.8.1 /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl) at ./terr.pl line 28.
I'm trying to run perl magick.
Perl Security
Jan 27, 2007ive been trying to install it for about 3 hours and ive finally got it working. now, how do i configure it to be nice and secure?
first thing is that i want to restrict which paths people can use in scripts. my site needs to access any paths but site users can only access their own directories. i want the exact same thing as in this thread but with perl instead of php
how do i block certain functions and which ones do i block? i heard perl and php are very similar so im guessing i want to block similar functions to the ones listed here