i try to upload a document on my server on smart ftp i am having a problem all my document's are saved as .html or .css and when i upload i get a error and then the document goes to a transfer queue.what am i doing wrong ? im able to delete my document's but im not able to upload ?
I would like an email auto-responder to not auto-respond back to the same person twice.
I went to my webhost webmail and set an auto-responder. I tested it by sending an email to it. The auto-responders just blindly replies back with an auto-response irregardless of whether it had auto-responded back to that email or not.
Don't you think that is dangerous? Because if someone else sends me a mail with an auto responder turned on. And I have my auto-responder turned on. They would just auto-respond back and forth hundreds of time until the mail quota is reached or the server goes down. Isn't it?
How can I get a "smart" auto-responder that does not auto-respond to the same person twice?
I came in contact with PC Smart Hosting when looking for a Xen-based cPanel VPS. I already had a VPS provider but they were quite expensive, their setup was something that I was doubting a bit and their financial administration was a mess. PC Smart Hosting offers various options for a cPanel VPS, so I opened up a ticket with sales for something custom.
Chris from PC Smart Hosting asked me some questions about what I was looking for and quickly came with an offer for me, a custom offer. I would get a 1GB cPanel VPS, with a Secondary DNS VPS in the US and backup space, all unmanaged. This all for a very reasonable price. I could optionally upgrade it to semi-managed or fully-managed for a very low price.
I choose to have it all fully managed. Not because I wouldn't be able to handle it myself, but their full management provides extra security, plus they harden your VPS when they install it, so it's way more secure. Add to that that really experienced people set it all up, so it's a timesaver. Besides that, I like to have it fully managed to I can get help when I don't know what to do anymore and I always think it's a good thing to have everything monitored. And the money was not something not to go fully managed for.
The VPS was created very rapidly, even though they had to place a new host machine to create it, and within 24 hours everything was up and running. The VPS is amazingly fast and up until now very stable, so I would definitely recommend PC Smart Hosting for a VPS!
I am considering getting a server from take2hosting.com. Their offer is great and sales has been very helpful and fast. Left definitely a good impression.
The downside is that they are on Cogent-only bandwidth. In the past I have really gotten something against Cogent, mainly due to one of my FDC servers being routed over Cogent and only pulling 10K/sec to Europe.
How is the Cogent network nowadays? Has it improved since a year ago? Worth considering?
From my tests the speeds are actually really great. They are located in San Jose, and I am testing speeds to Europe. For example to Surfnet Amsterdam (Cogent hands off the traffic to Surfnet in Amsterdam, so its on the Cogent network all the way) I am able to pull 2.53MB/sec. This is an incredible speed for a Westcoast<->Europe transfer. It almost makes me believe Cogent has started getting its act together.
For people who would like to test speeds, please use this test file. Especially European tests would be interesting, and it would be great if you could post where cogent hands off traffic from LosAngeles to either your network or a transit network. (In the US or Europe)
Right now I am hosting on a Level3/GlobalCrossing network @ the eastcoast. This works really well but it shows in the price. If I could combine a couple of budget boxes into one of those Quadcores it would save quite a lot. Question is: Is Cogent trustworty nowadays?
Thanks for your input
Ps. I know that hosting on a single-homed network is not the smartest thing to do. However they will add more carriers soon so this will not really be an issue. I'm expecting them to not drop Cogent tho, so my question remains
Does anyone have a good contact or contractor that they can recommend in the vicinity of Equinix Ashburn? Preferably someone who's done work in the facility before. We're in DC4 - which is building E I believe.
While Equinix has great staff, sometimes I just need simple things like servers unpacked and racked - things that I'd prefer not to pay $200/hr. for.
I was wondering if anyone has used any of the Energy Smart servers. We've just been buying the ordinary offerings from Dell that don't have Energy Smart power supplies, but we are considering purchasing them.
to install ESET Smart Security Business Edition (NOD32) firewall and antivirus on Windows 2003 R2 32bit.
Is there any one here who did this before and is this program compatible with above mentioned windows?
Is the firewall good enough to install on the server. Has any one had any problem with this program before? Any suggestion on better antivirus and internet security?
I look forward to receive your answer. Your answer will be really helpful for us.
I've almost got my server ready to get shipped out to colo.
Its a HP Proliant ML570 G2, 4x2.0GHz Xeon, 4GB PC1600 DDR ECC RAM, and a Smart Array 6402 Ultra320 SCSI RAID controller card. The way I currently have the HDs configured is as follows:
I will add one-two more 73.5GB 10k Ultra320 drives for running in RAID 5 or 6.
The 2 36.4GB 15k Ultra320 drives are running in RAID 1. This is the array that I am performing these tests on, -not- the 73.5GB drives.
Anyway, I was a little curious about my performance.
The following tsets
I know hdparm is not really meant for running tests on SCSI disks, however here is the output:
Code: # hdparm -tT /dev/cciss/c0d1
/dev/cciss/c0d1: Timing cached reads: 1732 MB in 2.00 seconds = 865.91 MB/sec HDIO_DRIVE_CMD(null) (wait for flush complete) failed: Inappropriate ioctl for device Timing buffered disk reads: 320 MB in 3.01 seconds = 106.45 MB/sec HDIO_DRIVE_CMD(null) (wait for flush complete) failed: Inappropriate ioctl for device Here is the IOZone output:
Code: File size set to 4096 KB Command line used: /opt/iozone/bin/iozone -s 4096 Output is in Kbytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 Kbytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride KB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 4096 4 188852 523178 658943 688853 610887 484275 572466 539010 580498 182914 471075 644937 671916 Then, just for the heck of it, I ran the tests on my little home Dell server with a ~80GB 7.2k RPM 1.5GB/s SATA drive:
Code: /dev/sda: Timing cached reads: 1680 MB in 2.00 seconds = 839.29 MB/sec Timing buffered disk reads: 136 MB in 3.02 seconds = 45.08 MB/sec
Code: File size set to 4096 KB Command line used: ./iozone -s 4096 Output is in Kbytes/sec Time Resolution = 0.000001 seconds. Processor cache size set to 1024 Kbytes. Processor cache line size set to 32 bytes. File stride size set to 17 * record size. random random bkwd record stride KB reclen write rewrite read reread read write read rewrite read fwrite frewrite fread freread 4096 4 152972 1135245 1358510 2132128 1163636 1103448 1184499 1829350 1588205 490774 1006882 1378196 2104830 Can you give me a little insight on my results?
NOTE: The batteries on my Smart Array 6402 controller are DEAD and need to be replaced, they will not charge. Since they are dead, the cache (which is 128MB) will not enable itself. If this cache were enabled, would I experience much different results from the tests?
i would just like to vocalise my utter disbelief at how incompetent and dishonest Absolute Design Barnsley aka Smart Merchant aka Absolutewebdesign.co.uk have been.
Our company signed up just over a year ago to their Absolute Design Smart Merchant shopping cart website system.
To overview, this is a pay-monthly service where they host the site and we add products to the CMS style website that Absolute Design have produced.
Being a small family business we opted for this kind of pay monthly service as it would (we hoped) give us some level of support from Absolute Design Barnsley to help with the running of the site.
At first they were helpful at getting the site setup initially but months down the line and after phonecalls or online chats with Absolute Design , the result has been no action being taken as requested.
Simple things like removing the option for other currencies... I phoned in August of 2008 and was asked to email the request to Absolute Design Barnsley , which i did. Did the other currencies get removed? Nope! I phoned and emailed many times.
This year due to the economic climate we have had many price changes to do, so i phoned Absolute Design Barnsley and asked for a holding page to be put up while i changed all the prices.
I was told this would be done within the hour.
I had my doubts that this would actually happen due to past experience, and indeed a WEEK later and the holding page STILL was not up.
During this week we had several people try and buy things at the old prices and we had to cancel orders. This is obviously frustrating for us and the customers.
Due to Absolute Design 's Smart Merchant poor system i since found out i was unable to 'turn off' the shop in any way except for basically deleting the entire payment gateway setup.
Products were also still viewable at old prices via google, even if i disabled them in the CMS itself. BAD Smart Merchant !
Also in this time i managed to decide and almost fully populate a new website for our shop, it seem's Absolute Design Barnsley cannot even produce a holding page in that same space of time.
Now, you may think why didnt i just leave? Well, after that week i rang up and asked to cancel, i was asked why and i CALMLY stated my reasons, which were basically poor support.
This resulted in Andy Clegg from Absolute Design Barnsley saying to email my request to leave and he slammed down the phone.
I emailed my request to change our Domain IPS tag and contact details and within a few minutes our website had been deleted BUT Absolute Design Barnsley decided to delete the IPSTAG for the domain, basically rendering the domain useless, including our email which we use on a daily basis.
I spoke Absolute Design again on the webchat (on a friday) and asked them to change the IPStag again, they said ok, but it probably wont get done till Monday.
I was obviously doubtful as it didnt take them long to delete the IPSTAG....
Monday comes and Absolute Design still haven't changed the IPSTAG. We are shut on mondays so i rang on Tuesday and spoke to Craig. He seemed more reasonable and said he would change it shortly. Several hours later and Absolute Design Barnsley still had'nt changed our IPSTAG and were still basically holding our domain hostage.
I ring up AGAIN, speak to craig, he says hold on for a moment, about a minute later they just hung up the phone again. I ring once more and noone answers...
Instead of swift switchover to the new site, Absolute Design Barnsley have forced us to take action with Nominet to recover our domain.
This just seems ridiculous, I'm guessing Absolute Design Barnsley must be losing alot of customers but to act the way they have is just childish.
What is the point of causing so much agro just because someone wants to cancel?
I hope this post reaches anyone else who is considering taking up services with Absolute Design Barnsley aka Absolute Web Design aka Absolute Web Hosting aka Absolute Shopping Cart aka Smart Merchant and urge you to think twice!
As the title says, 1 of the accounts on my server is getting the following error message - error number 0x800CCC79 server response 451 temporary local problem -
Yet other accounts on the server are sending and recieving fine?
what would cause this error? Its not tempory as its been 48 hours
yum -y groupinstall kde Loading "priorities" plugin Setting up Group Process Setting up repositories Cannot find a valid baseurl for repo: update Error: Cannot find a valid baseurl for repo: update
what is this? what ever i try to install i get this weird error..
Unable to parse zone: Error while parsing zonedata for xyz.com: syntax error, line 25 ...propagated at /usr/local/cpanel/Cpanel/CPAN/Net/DNS/ZoneFile/Fast.pm line 142.
--> Populating transaction set with selected packages. Please wait. ---> Package cadaver.i386 0:0.22.5-1.el5.rf set to be updated ---> Package mtr.i386 2:0.72-1.el5.rf set to be updated ---> Package rsync.i386 0:3.0.2-1.el5.rf set to be updated ---> Package nmap.i386 2:4.20-1.el5.rf set to be updated ---> Package lftp.i386 0:3.7.1-1.el5.rf set to be updated ---> Package syslinux.i386 0:3.63-1.el5.rf set to be updated ---> Package dkms.noarch 0:2.0.19-2.el5.rf set to be updated ---> Package subversion.i386 0:1.4.6-0.1.el5.rf set to be updated --> Running transaction check --> Processing Dependency: perl(Crypt:asswdMD5) for package: syslinux --> Finished Dependency Resolution Error: Missing Dependency: perl(Crypt:asswdMD5) is needed by package syslinux
Other Details: eth0: error fetching interface information: Device not found cp: cannot stat `/etc/apf.bk.last/vnet/*.rules': No such file or directory Imported options from 9.7-1 to 9.7-1. Note: Please review /etc/apf/conf.apf for consistency, install default backed up to /etc/apf/conf.apf.orig my host has said Code: edit the apf.conf file to venet0:0 instead of eth0 which ive done and im still getting the error, Ive pasted my current conf.apf config below
Code: #!/bin/sh # # APF 9.7 [apf@r-fx.org] # Copyright (C) 1999-2007, R-fx Networks <proj@r-fx.org> # Copyright (C) 2007, Ryan MacDonald <ryan@r-fx.org> # This program may be freely redistributed under the terms of the GNU GPL # # NOTE: This file should be edited with word/line wrapping off, # if your using pico/nano please start it with the -w switch # (e.g: pico -w filename) # NOTE: All options in this file are integer values unless otherwise # indicated. This means value of 0 = disabled and 1 = enabled.
## # [Main] ## # !!! Do not leave set to (1) !!! # When set to enabled; 5 minute cronjob is set to stop the firewall. Set # this off (0) when firewall is determined to be operating as desired. DEVEL_MODE="1"
# The installation path of APF; this can be changed but it is not recommended. INSTALL_PATH="/etc/apf"
# Untrusted Network interface(s); all traffic on defined interface will be # subject to all firewall rules. This should be your internet exposed # interfaces. Only one interface is accepted for each value. IFACE_IN="venet0" IFACE_OUT="venet0"
# Trusted Network interface(s); all traffic on defined interface(s) will by-pass # ALL firewall rules, format is white space or comma separated list. IFACE_TRUSTED=""
# This option will allow for all status events to be displayed in real time on # the console as you use the firewall. Typically, APF used to operate silent # with all logging piped to $LOG_APF. The use of this option will not disable # the standard log file displayed by apf --status but rather compliment it. SET_VERBOSE="1"
# The fast load feature makes use of the iptables-save/restore facilities to do # a snapshot save of the current firewall rules on an APF stop then when APF is # instructed to start again it will restore the snapshot. This feature allows # APF to load hundreds of rules back into the firewall without the need to # regenerate every firewall entry. # Note: a) if system uptime is below 5 minutes, the snapshot is expired # b) if snapshot age exceeds 12 hours, the snapshot is expired # c) if conf or a .rule has changed since last load, snapshot is expired # d) if it is your first run of APF since install, snapshot is generated # - an expired snapshot means APF will do a full start rule-by-rule SET_FASTLOAD="0"
I upgraded my PHP to 5.2.4 ang changed server API from Apache to CGI, and now a site doesnt load anymore...
It gives this error message: Fatal error: Internal Optimizer error: can't translate opcode 60 (JMP_NO_CTOR), please contact Zend support in /home/vrock/public_html/rwf/rwengine.lib on line 0
PHP Version 5.2.4 Zend Engine v2.2.0, Copyright (c) 1998-2007 Zend Technologies with Zend Extension Manager v1.2.0, Copyright (c) 2003-2007, by Zend Technologies with Zend Optimizer v3.3.0, Copyright (c) 1998-2007, by Zend Technologies
Usually everything has been working fine with this .htaccess-file until today. There hasn't been any change on the system.
If you click on the hyperlink to the restricted area the login window appears where you need to type in your username and a password. After typing in these data the following message appears in the browser:
500 Internal Server Error
The server encountered an internal error or misconfigruation and was unable to complete your request. (…)
The apache error log file contains the following message:
Request exceeded the limit of 10 sub request nesting levels due to probable configuration error.
Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace.
The increase of the LimitInternalRecursion does not solve the problem. So I switched the LogLevel in the httpd.conf file from warn to debug and looked again on the entries of the error log.
The following appeared (I have replaced ip addresses, usernames and URL by xyz or <URL>) :
Code:
[error] [client xyz] mod_digest_apple: Client is using a nonce not issued by this server for this context:/rb/Vorlesung/WS12/Downloads/, referer: http:<URL>
Command:MLSD Response:150 Accepted data connection Response:226-ASCII Response:226-Options: -a -l Response:226 24 matches total Error:Connection timed out Error:Failed to retrieve directory listing
I am using fedora 7 and when i fire "yum localinstall dovecot-*" it gives error. Could not retrieve mirrorlist [url]Error was [Errno4] IOError:< urlopen Error (110,'connection timed out')> Error:cannot retrieve repository metadata (Repomd.xml) for repository:fedora
Here are my settings in the /etc/php5/apache2/php.ini file:
display_errors = On display_startup_errors = Off log_errors = On log_errors_max_len = 1024 ignore_repeated_errors = Off ignore_repeated_source = Off report_memleaks = On error_log = /var/log/php5/error.log
However unfortunately I never see any error log being generated in the /var/log/php5/error.log file?
Also with my shared hosting site one thing which I noticed was, due to some configurations set by them, the error.log used to generate in the folder where the error occured. This is a cool thing which they used to do, but I just dont understand how did they do that.
