I have had my domain for about 3 months now, www.mycwd.com.au - It is ran off a VPS and I purchased the Domain.
I was wondering if anyone can help me set up a mailing system so I can receive/send emails.
I've got a situation in which I need to have a set of mail accounts that share a domain name with a domain that's already in use as a domain alias and because the domain is already in use, I'm unable to create a new account using that domain. I tried explicitly adding "www" to the domain alias so I could keep the www.domain.com address as an alias and reserve the "domain.com" name for use as a separate account, but Plesk won't allow for that.
How to address this? The idea I'm currently considering is to delete the domain alias and then create the new account and manually set the DOCUMENT ROOT of the new account to refer to the other domain's document root. I'm sure this could create some difficulty in Plesk so I'm looking for input before trying it. I'm actually not even sure exactly where I would be able to redefine the document root with Plesk allowing the change and not overwriting it later.
If all else fails, I can setup a new account on a different and unrelated Plesk server, but I'd prefer not to do that.
I've never loaded Linux onto a RAID array before,
I have an Adaptec 2105S card, with 3 x SCSI HDD's attached, in a RAID5 setup. When I boot the Cent OS Server 4.4 CD, it says I don't have any hard drives attached. I am then prompted to select a device driver, but it does not show up in the list.
The options in the list are:
- Adaptec AACRAID (aacraid)
- Adaptec AHA-152x (aha152x)
- Adaptec AHA-2740, 28xx, 29xx, 39xx (aic7xxx)
- Adaptec Aic79xx SCSI Host Bus Adapter driver (aic79xx)
- Adaptec SAS/SATA Host Bus Adapter driver (adp94xx)
It says if I have a driver disk, hit F2. The problem is that I don't have a driver disk.
The manual tells me to visit [url]for drivers, but it's not offline. When I go to the download section for the card [url]the only *nix option, is SuSE.
I am having issues setting up CloudFlare on out PPA system. I have is setup under Hosted Applications. I have setup a Resource for CloudClare and added it to the service templates. When i go into a clients Control Panel to install the app, I get a couple different errors. When i try to use a previously setup administrator for the subscription, which is listed under "Grant administrative access to existing user," I get the following error:
"Error: Installation of CloudFlare For PA failed. invalid values passed for settings of application resource; details for setting with id 'admin_username': The "CloudFlare username" setting value 'xxxxx' is already in use. Please provide unique value." Is this because I am logged in as the user?
When I create a login under "Use administrative credentials not connected to any particular user," I get the following error: "Error: Installation of CloudFlare For PA failed. Invalid structured output returned by script: Failed to parse structured output. Structured output: '<output xmlns= URL.... WARNING: A connectivity error occurred while contacting the service. WARNING: A connectivity error occurred while contacting the service. WARNING: A connectivity error occurred while contacting the service. WARNING: A connectivity error occurred while contacting the service.'. "
I do get an email from CoudFlare with the setup instructions for the new account.Under the PPA control panel, I am using the IP address for the Management Node in the "POA API IP" field. Is this correct, or should I have entered localhost?I am running 11.5 Update 8, and CloudFlare For PA (3.0.2-18).Setup instructions for Plesk or POA does not quite cover everything for a PPA installation.
How do I change the default system setting for the index manager so that indexes server wide are always set to no indexing.
I am aware that this can be done individually in cpanel, but how do I set it so that it is the default setting on the server to have
"No Indexing"
Watchout for the free domain giveaways that come with ixwebhosting services.
I've been trying to change one my domain's nameservers for over 48 hours.
it started with a faulty domain modification system that gives out an error for each try you do to change the nameservers
and continued with a laggy and unhelpfull chat with support personal (probably outsourced to russia) that couldn't do anything about this problem and eventually told me to open a tech ticket that was solved about 12 hours later and only then chaged my nameservers.
this cheap hosting has it's price, whitch mostly is your free time.
I have always been using a no-ips service for a domain name. It was really easy with the dynamic update client because I have a dynamic ip.
I have just registered a domain and would like to point that to my server also. My registrar says it is currently parked, there doesn't seem to be an option to unpark it anywhere. I have also changed the nameserver to my no-ip domain name.
Nothing is happening.
I have also googled dns.. If I want to point my domain directly to my server do I need to go and install Active Directory and then dns or can I just install DNS, do I even need to do this??
Seems like a lot of hassle tbh, this is really frustrating me because i'm pretty tech savvy but am completely lost here..
I've taken a reseller account from ResellerZOOM which came with WHM/cPanel. I've my own private nameservers(meaning I got my own IP). I've a domain that I want to be forwarded to my wordpress.com blog, just like domain registrars offer domain forwarding but the registrar I registered my domain with doesn't give domain forwarding. so I was thinking that maybe I can point the domain to my nameservers & then have it forwarded to my wordpress.com blog. The thing is that I haven't used WHM before & I don't know how to do it, create some DNS zone maybe!!
The only way I know is to create an account for that domain, allot it some diskspace & then redirect via .htaccess file, which would be overkill IMHO. I know it can be done without creating an account, some other way.
its been long time since I have set one and its been really bugging with the feather theme interface, which I haven't used before
now, here is the pt.
I have 3 ips , I want the main ip to be unique
i.e assuming .2, .3 and .4 are the the ips we have ben provided with, where .2 is the main ip of the server (lxadmin)
now, in the dns template, I have 6 options where ip has to be assigned, as -
base, cp, mail, ns, ns1, ns2
I have set the base,cp, mail, ips to .3
I don't have a clue on what to set for the ns, ns1, ns2
I want .3 to be shown as the pinged ip when site is pinged.
We have set .3 and .4 as the nameserver ips in the registrar, so do I need to provide .3 as the ns1 ip and .4 as the ns2 ips or both the ips have to be .3
and what should be the ns ip?
I've got DirectAdmin installed, and my domain name (misacampo.org) hosted with XeoDomains.com.
I'm wondering how I set up my DNS so that whenever I point more domains to my VPS their DNS will be set to ns1.misacampo.com and ns2.misacampo.com.
Would it be as simple as pointing my domain to my VPS IP, then setting up this in DirectAdmin?:
Add Zone
Domain Name:
IP Address:
Name Server 1:
Name Server 2:
Would I enter:
Add Zone
Domain Name: misacampo.org
IP Address: xxx.xxx.xxx.xxx
Name Server 1: ns1.misacampo.org
Name Server 2: ns1.misacampo.org
Then point my domain to xxx.xxx.xxx.xxx, and set it up my domain at XeoDomains.com like so:
Add New Child Name Server
Host Name: ns1.misacampo.org
Ip Address: xxx.xxx.xxx.xxx
and
Add New Child Name Server
Host Name: ns2..misacampo.org
Ip Address: xxx.xxx.xxx.xxx
Would this work? I'm looking to do a quick shift from my old CPS (LXAdmin) to my new VPS (DirectAdmin) with at little downtime as possible. Do I need to set up any other records for the domain for my email accounts to work, or would DirectAdmin take care of all this?
I've registered a domain about an hour ago called animeclassicreviews.com
Nothing comes up, all i get is 'under construction' or i get a 404 error if i remove the www, i tried to forward url to my blogspot account but nothings happening.
Heres what Ive done created a new user and set their home directory as /home/<user>. I then made a public_html folder within their home dir.
Then I went into httpd.conf, and added a virtual host for that domain with the document root to the public_html dir i created .
At this point, what is there left to do? I need to mess with the DNS right? Anything else?
I have recently just purchased an unmanaged vps from poundhost. I have never used a vps before so we shelled out for a WHM control panel! The issue now is that we do not have a nameserver set up or any main domain to use as a nameserver.
We have the main IP address and two additional IP's given to us by poundhost, how do I use these to start hosting and managing websites?
I have a web server running Server 2003 and IIS6. I can access everything fine via IP. Now I want to have a domain name work with it.
The server is in a .local domain environment. Does anyone have any info on how I should setup DNS for the web server if the domain itself is not getting any DNS info from the outside?
Is it just a matter of adding new A and NS records or do I need to be in a FQDN domain for it to work?
I ordered a domain from Name and a shared hosting package from Hawk Host. How do I set them up so they work together? I thought all I had to do was add the Hawk Host name servers to my Name account but that doesn't seem to be helping. I don't have any webpages up yet but I do have some files uploaded to be used as a redirect for a game server. The redirect isn't loading properly most of the time and when I type my domain name into a browser my directory won't show up either, just the parking page. I ordered both of these last week.
View 5 Replies View RelatedI am trying to write a perl script, it send's mail to a user i used system(mail -s test) and also send some messages using this.
but my issue is i receive mail with html code like <br> and so..
how to get a plain mail using this system command.
I have a quick question about some DNS zones I'm trying to set up for a customer. I figured I would try asking the community before bugging our top-level admins (they have enough to do already, and I'd rather learn this myself).
We have a customer for whom we are managing their DNS. The site is actually hosted elsewhere, but the DNS originates on our server.
They have another site that is hosted with us, and they would like to set up a subdomain redirect from the remotely-hosted site to the site hosted on our hardware. So, the situation looks something like this:
example.com : hosted elsewhere (primary IP not ours), DNS with us
FooSite.example.com : redirect this to www.FooSite.com
I could edit httpd.conf, but it would be easiest (for firewall reasons at the moment) if I could enter in the proper zones via WHM zone editor. I'll be able to see the results either way. I tried setting up the 'A' and 'CNAME' records, and I got as far as directing the 'A' records for the subdomain to the local IP, but I'm not sure how to finish it off (assuming I'm going down the right path). My own knowledge level in this regard is somewhere between novice and intermediate (which is why I have partners and admins ).
I've got SUSE 10 loaded and installed at home.
My ISP service is highspeed from Comcast (speed right now not an issue), I would like to setup a domain name on the box to play around with - nothing serious yet.
I have several domain names purchased (Wildwest & Enom) and would like to use one of those on this box, or even more domains at a later day.
I'm trying to set up a login script on twenty subdomains that will be checked on another subdomain. I've found this example for different domains and figure it should be simple enough to utilise but my ereg is crappy
<IfModule mod_headers.c>SetEnvIf Origin "http(s)?://(www.)?(domain1.com|domain2.com)$" AccessControlAllowOrigin=$0$1Header add Access-Control-Allow-Origin %{AccessControlAllowOrigin}e env=AccessControlAllowOrigin</IfModule>
If a create a subscription on a plesk Server through the API don't know how to specify the preferred domain and it's always set to domain.tld. I would like to set it to none for all.
My xml request:
Code:
<packet version="1.6.3.0">
<webspace>
<add>
[Code].....
I have a domain name from godaddy and recently got a host plan in hostgator.
As this is the first time I use hosting, it is very confusing how to set it up properly.
So far what I figured out and was able to set is the DNS in godaddy and the add-on domain in hostgator.
So now I was able to point 'MyDomain' to direct to 'hostgatorDomain/MyFolder/' (names just for example).
The problem is that masking is not turned on and who ever clicks 'MyDomain' will get to the right location, but the address will change to 'hostgatorDomain/MyFolder/'.
How to do the set up so the URL will not change?
I'm trying to accomplish two goals: First, get "Pretty Links" to work on my local Wordpress instance; second, to set up a local domain for the site.I have a fresh install of Apache 2.4.6 running, and I'll I've done is enable the rewrite and vhost_alias mods. Nevertheless, here's my apache2.conf: URL....
I need to have AllowOverride set to All. This, I gather, allows .htaccess files within the subsequent directories to alter the apache config. To try one thing at a time, I'm accessing the site from localhost/var/www/dhae/Wordpress (foregoing the domain). I tried altering the 000-default.conf to oblige this: [URL] .... -- all I added was the <Directory> section. This didn't work, and neither did changing the AllowOverride to All in the apache2.conf.
I wondered if perhaps I needed something more specific to the directory, so I tried using my second goal to accomplish this. I wrote the dhae.conf: URL....
I've also added the following line to my HOSTS file:127.0.0.1 dhae.dev
This hasn't worked either. I've tried virtual host config stuff as much as I could find, and I'm just not having any luck. What I have even came from this site (URL....).