We just recently setup a new dedicated for a customer which is running Centos 5 with WHM/cPanel as per his request.
About a week after the initial setup, he contacts us saying there is a problem with the "Service Status" page in WHM where it isn't showing the services, only the server & memory load.
To cut a long story short, he has it setup to monitor the services under "Service Manager" and I've checked that the services are indeed running but they still aren't listed.
After searching around I found a forum post with the exact same issue, so I did as the post instructed and it worked.
About another week passes and I find out he has contacted us again about the same problem, after looking into in a little more I seem to think it's happening every time cPanel updates itself.
Does anyone have any ideas on what might be going on and how I can go about fixing this properly? For the time being I'm just running the 'fix' in the forum post I found, but that only works until cPanel updates again.
The 'fix' I'm using at the moment can be found here.
Server is running Centos 5, WHM 11 cPanel 11 (RELEASE).
Is there a way to change the web services (from Windows) from SYSTEM to an Admin account? (Cos i need to use PHP's system() to run a process on the system but it only takes in user: ADMIN and not SYSTEM
I have tried changing the following processes: IIS Admin World Wide Web Publishing Simple Mail Transfer Protocol (SMTP)
but i still get a dependency error. Please advise.
I have a Server with Centos7 + Plesk 12 and in the service configuration say that the Bind service is not installed, from command line i have install named services and make a manual configuration the first domain, but when I return to the service page in plesk... the problem is the same, the Bind Service is not installed; then the problem is when i want create a new hosting i need to go to the ssh to make the DNS configuration...
Got following Problem: Unable to find service node for web service on domain with id = 0
After a Check from [URL] ....
I tried this: [URL] ....
Result:
+--------------------+--------------+---------------------------------------+------------------------------+------------+ | Domains | Service Type | IpAddressesCollections.ipCollectionId | Current value of ipAddressId | Have to be | +--------------------+--------------+---------------------------------------+------------------------------+------------+ | XXXXXXXXXXXXX.org | mail | 30 | 0 | 1 | +--------------------+--------------+---------------------------------------+------------------------------+------------+
Resolution:
mysql -uadmin -p`cat /etc/psa/.psa.shadow` -Dpsa -e 'Update IpAddressesCollections SET ipAddressId = 1 WHERE ipCollectionId = 30'
Result: ERROR 1062 (23000) at line 1: Duplicate entry '30-0' for key 'PRIMARY'
Deleted a domain workspace in Parallels Plesk and now I am getting this error when signing into the panel:Looked at the logs and been trying multiple commands (including the bootstrapper repair etc.)I found the full error from the logs:
[13-Jun-2015 16:35:33 UTC] PleskDBException: Unable to find service node for web service on domain with id=6 file: /usr/local/psa/admin/plib/PhDomain.php line: 1404 code: 0 trace: #0 /usr/local/psa/admin/plib/Smb/Subscription/Domain.php(490): PhDomain->getWebHostingServiceNode()
After deleting a domain, we got the following error which rendered the panel useless.
Internal error: Unable to find service node for web service on domain with id=5 Message Unable to find service node for web service on domain with id=5 File PhDomain.php Line 1402 Type PleskDBException Go To Previous Page
Days ago i did some edit in my.cnf and php.ini, httpd.conf ( i don't remember what i edited , sorry ). Now i can't view server status . I mean img244.imageshack.us/img244/9193/49930251.jpg ( my friend ) img520.imageshack.us/img520/8650/17287760.jpg ( my page ).
Maybe i disable it... Can you please tell me how to re-enable it again?
This month I just pruchase dedicated server, spec are AMD X2 with 1GB RAM.
On ssh, the memory result is: root@server1 [~]# free -m total used free shared buffers cached Mem: 883 836 47 0 163 397 -/+ buffers/cache: 275 608 Swap: 2047 0 2047
My question:
1. Why the total ram just 883MB? I think it should 1024Mb?
2. The server still empty, but why I see the total used memory is 836Mb?
I only have experience with cpanel vps and when my server empty it only use around 200MB RAM and around 400MB ram usage when my vps load with 30+ account.
we have an option in WHM which we can view the Apache Process, but we don't have this option in PLESK, can I view Apache Process in PLESK too or from SSH?
It seems to be common that in httpd status in Apache 2.x except real connections you can also see multiple connections from www.example.com Is it a bug and if not is there a way to make httpd status to not show those www.example.com connections?
I have a message in queue for about 24 hours and checking the delivery log I found this.
LOG: MAIN cwd=/usr/local/cpanel/whostmgr/docroot 4 args: exim -v -M 1INUw5-0007VU-DZ delivering 1INUw5-0007VU-DZ Connecting to mx.uol.xxx.br [xxx.xxx.com.br]:25 ... connected SMTP<< 220 starfury20.xxx.com.br ESMTP SMTP>> EHLO svr01.xx*********** SMTP<< 250-starfury20.xxx.com.br 250-PIPELINING 250-SIZE 20971520 250-VRFY 250-ETRN 250 8BITMIME SMTP>> MAIL FROM: SIZE=3111 SMTP>> RCPT TO: SMTP>> DATA SMTP<< 250 Ok SMTP<< 450 Client host rejected: cannot find your hostname, [74.86.12.2] SMTP<< 554 Error: no valid recipients SMTP>> QUIT
I have checked dnsreport for this domain and found this
WARNING: One or more of your mailservers is claiming to be a host other than what it really is (the SMTP greeting should be a 3-digit code, followed by a space or a dash, then the host name). If your mailserver sends out E-mail using this domain in its EHLO or HELO, your E-mail might get blocked by anti-spam software. This is also a technical violation of RFC821 4.3 (and RFC2821 4.3.1). Note that the hostname given in the SMTP greeting should have an A record pointing back to the same server. Note that this one test may use a cached DNS record.
***********.co claims to be host svr01.xx*********** [but that host is at 74.xx.xx.2 (may be cached), not 74.xx.xxx.13]. <br />
What should i do to correct this error? btw, I host about 100 sites on this server.
I have a PROMISE TECH hardware raid card running a 4 disk RAID 10 array. I logged into today to check the drive statuses which were:
Drive 1: OK Drive 2: OK Drive 3: OK Drive 4: OK, PFA
So they all look to be okay, but that 4th disk has PFA (I'm guessing that stands for predicted failure analysis) but I am not sure if that means its predicting a fail, or just stating that the technology is running?
Also, this array is the system drive on a server which has much too little memory, (there is usually 5-7GB PF swap during the day) and I'm concerned that the drives constantly under that stress are more prone to fail. They are 2.5" SAS 10k Fujitsu if that means anything.
how i can enable apache status like cPanel ! in directadmin
before im enabled
Location /httpd-status> SetHandler server-status </Location> but seems its not like cPanel ( dont show IP and where file now downloaded ... and more information)
Server Version: Apache/2.2.3 (CentOS) Server Built: May 28 2009 12:50:07
Current Time: Wednesday, 10-Jun-2009 05:59:10 EDT Restart Time: Tuesday, 09-Jun-2009 13:39:08 EDT Parent Server Generation: 0 Server uptime: 16 hours 20 minutes 1 second 19 requests currently being processed, 13 idle workers
Scoreboard Key:
"_" Waiting for Connection, "S" Starting up, "R" Reading Request, "W" Sending Reply, "K" Keepalive (read), "D" DNS Lookup, "C" Closing connection, "L" Logging, "G" Gracefully finishing, "I" Idle cleanup of worker, "." Open slot with no current process
PID Key:
4494 in state: W , 5241 in state: W , 3142 in state: _ 4318 in state: _ , 4319 in state: W , 5173 in state: _ 4175 in state: W , 5242 in state: W , 5174 in state: W ....
have a look at my mysql status? My php forum gets quite slow at times and I don't really have a clue about the reason why. The server runs on a 3GHz Pentium 4 with 2Gb. The load is strangely not excessive.
I have already made an effort at optimising queries; a week ago, everything seemed fine. I'm worried though about the value of zero for handler_key_reads. Any ideas?
This has threw me a little bit. I am to configure WHCMS for my server and its asking me for my server status address. Can some one explain what this odes, i know it has something to do with monitoring. Additionally how should i configure this?
to place the status file that comes with WHMCS to my servers in a place that can be reached by a browser so that the details will be displayed in WHMCS.
my server status goes high,when i check current cpu usage is see all time this only /usr/local/cpanel/whostmgr/bin/whostmgr2 ./top what is this bcz iam newbie in this dedicated server also iam seeing lotz of /usr/local/apache/bin/httpd -k start -DSSL
When looking at the above page (and I've been told this reflects the usage of the entire server I'm on, not just my vps) everything looks fine except the Memory Usage. It's up at about 75%
