[openvz] WHM not show partition on Service Status and Disk usage
Hi, the VPS not show the partition on "Service Status" of WHM and in the "Show Current Disk Usage" see the Attach Files images...
How to fix/show this?
Attached Thumbnails
ÂÂ*
I can get the service list by /usr/local/psa/bin/service –l
But when i try /usr/local/psa/bin/plesk –-status it show error : No such file or directory
today i get a vps from lime, and i try to create a vps
but when i try to enable vps i get this message :
Could Not Start Vps, Reason: vzquota : (error) Quota getstat syscall for id 110: Inappropriate ioctl for device: vzquota init failed [3]:
and the disk usage not display properly:
I have a disk in raid, but it seems raid is not working correctly. I took it out, and plug into another server without raid. However, fdisk shows error
Quote:
#fdisk /dev/sdb
device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel
Building a new DOS disklabel. Changes will remain in memory only,
until you decide to write them. After that, of course, the previous
content won't be recoverable.
The number of cylinders for this disk is set to 20023.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)
Command (m for help):
Should I correct the partition table now, or should I put it in another raid for checking?
can a Xen disk image be converted to a diskpartition?
Someone is asking whether I can host his disk image at his current host, which he is leaving for poor I/O (wonder why that would be ). I can host a diskimage, but I don't like diskimages (slow, and 100GB isn't very 'comfortable' either). Is there any way out there to convert a disk image into a normal partition?
partition is recommendable for openvz
Which project of partition is recommendable for openvz in the main server?
I just installed DirectAdmin with Apache 2.2 on CentOS 5.2 and whenever I manually restart httpd, it doesn't show if it started the service or not.
Code:
[root@server ~]# service httpd restart
Stopping httpd: [ OK ]
Starting httpd:
[root@server ~]# service httpd status
httpd (pid 17586 17585 17584 17583 17579 17555) is running...
It's running but it doesn't show the OK..
Is this bad? I'd like to fix it before I start moving my files over so I don't mind if I have to reimage it.
Code:
mysql> SHOW STATUS;
+----------------------------+------------+
| Variable_name | Value |
+----------------------------+------------+
| Aborted_clients | 510 |
| Aborted_connects | 0 |
| Binlog_cache_disk_use | 0 |
| Binlog_cache_use | 0 |
| Bytes_received | 441269798 |
| Bytes_sent | 2031527307 |
| Com_admin_commands | 27428 |
| Com_alter_db | 0 |
| Com_alter_table | 4 |
| Com_analyze | 0 |
| Com_backup_table | 0 |
| Com_begin | 0 |
| Com_change_db | 27481 |
| Com_change_master | 0 |
| Com_check | 0 |
| Com_checksum | 0 |
| Com_commit | 0 |
| Com_create_db | 0 |
| Com_create_function | 0 |
| Com_create_index | 0 |
| Com_create_table | 0 |
| Com_dealloc_sql | 0 |
| Com_delete | 16883 |
| Com_delete_multi | 0 |
| Com_do | 0 |
| Com_drop_db | 0 |
| Com_drop_function | 0 |
| Com_drop_index | 0 |
| Com_drop_table | 0 |
| Com_drop_user | 0 |
| Com_execute_sql | 0 |
| Com_flush | 0 |
| Com_grant | 0 |
| Com_ha_close | 0 |
| Com_ha_open | 0 |
| Com_ha_read | 0 |
| Com_help | 0 |
| Com_insert | 5515 |
| Com_insert_select | 379 |
| Com_kill | 0 |
| Com_load | 0 |
| Com_load_master_data | 0 |
| Com_load_master_table | 0 |
| Com_lock_tables | 0 |
| Com_optimize | 0 |
| Com_preload_keys | 0 |
| Com_prepare_sql | 0 |
| Com_purge | 0 |
| Com_purge_before_date | 0 |
| Com_rename_table | 0 |
| Com_repair | 1 |
| Com_replace | 0 |
| Com_replace_select | 0 |
| Com_reset | 0 |
| Com_restore_table | 0 |
| Com_revoke | 0 |
| Com_revoke_all | 0 |
| Com_rollback | 0 |
| Com_savepoint | 0 |
| Com_select | 154467 |
| Com_set_option | 132 |
| Com_show_binlog_events | 0 |
| Com_show_binlogs | 7 |
| Com_show_charsets | 33 |
| Com_show_collations | 33 |
| Com_show_column_types | 0 |
| Com_show_create_db | 0 |
| Com_show_create_table | 0 |
| Com_show_databases | 6 |
| Com_show_errors | 0 |
| Com_show_fields | 0 |
| Com_show_grants | 17 |
| Com_show_innodb_status | 0 |
| Com_show_keys | 0 |
| Com_show_logs | 0 |
| Com_show_master_status | 0 |
| Com_show_ndb_status | 0 |
| Com_show_new_master | 0 |
| Com_show_open_tables | 0 |
| Com_show_privileges | 0 |
| Com_show_processlist | 0 |
| Com_show_slave_hosts | 0 |
| Com_show_slave_status | 0 |
| Com_show_status | 2 |
| Com_show_storage_engines | 0 |
| Com_show_tables | 38 |
| Com_show_variables | 79 |
| Com_show_warnings | 0 |
| Com_slave_start | 0 |
| Com_slave_stop | 0 |
| Com_stmt_close | 0 |
| Com_stmt_execute | 0 |
| Com_stmt_prepare | 0 |
| Com_stmt_reset | 0 |
| Com_stmt_send_long_data | 0 |
| Com_truncate | 0 |
| Com_unlock_tables | 0 |
| Com_update | 38964 |
| Com_update_multi | 0 |
| Connections | 306 |
| Created_tmp_disk_tables | 6302 |
| Created_tmp_files | 3 |
| Created_tmp_tables | 26220 |
| Delayed_errors | 0 |
| Delayed_insert_threads | 0 |
| Delayed_writes | 0 |
| Flush_commands | 1 |
| Handler_commit | 0 |
| Handler_delete | 7984 |
| Handler_discover | 0 |
| Handler_read_first | 10826 |
| Handler_read_key | 80354286 |
| Handler_read_next | 921590052 |
| Handler_read_prev | 0 |
| Handler_read_rnd | 2852179 |
| Handler_read_rnd_next | 358019891 |
| Handler_rollback | 0 |
| Handler_update | 34804652 |
| Handler_write | 3299547 |
| Key_blocks_not_flushed | 0 |
| Key_blocks_unused | 350900 |
| Key_blocks_used | 136652 |
| Key_read_requests | 177777142 |
| Key_reads | 234783 |
| Key_write_requests | 192997 |
| Key_writes | 70499 |
| Max_used_connections | 18 |
| Not_flushed_delayed_rows | 0 |
| Open_files | 126 |
| Open_streams | 0 |
| Open_tables | 89 |
| Opened_tables | 124 |
| Qcache_free_blocks | 1493 |
| Qcache_free_memory | 101831304 |
| Qcache_hits | 247556 |
| Qcache_inserts | 154232 |
| Qcache_lowmem_prunes | 0 |
| Qcache_not_cached | 170 |
| Qcache_queries_in_cache | 2670 |
| Qcache_total_blocks | 6866 |
| Questions | 491633 |
| Rpl_status | NULL |
| Select_full_join | 0 |
| Select_full_range_join | 0 |
| Select_range | 15228 |
| Select_range_check | 0 |
| Select_scan | 42652 |
| Slave_open_temp_tables | 0 |
| Slave_retried_transactions | 0 |
| Slave_running | OFF |
| Slow_launch_threads | 0 |
| Slow_queries | 29 |
| Sort_merge_passes | 0 |
| Sort_range | 26186 |
| Sort_rows | 92603755 |
| Sort_scan | 28212 |
| Table_locks_immediate | 427295 |
| Table_locks_waited | 239 |
| Threads_cached | 1 |
| Threads_connected | 17 |
| Threads_created | 18 |
| Threads_running | 2 |
| Uptime | 9400 |
+----------------------------+------------+
163 rows in set (0.00 sec)
this is what SHOW STATUS; commands give me can anyone provide me any helpful tips on what I can adjust in my.cnf to lower my server load which is above 10 during peak hours and mysql is the only thing eating this serve up I have lots og 3gb ram and a 64bit AMD 2800 server
I have 2 x250 gb disk on a server. What configuration would be the best for partition to run Plesk and webhosting on the server?
I want www files on 2nd disk and server is hosted at Softlayer that we can reload server from web interface.
i have the partition (/) 80% full ; what should i do? the picture below
[url]
note that i have raid 1 .
I am unable to mount the 2nd disk's extended partition. Please help.
Commands I tried and returns....
Quote:
mount -t ext2 /dev/hdd2 /second
mount: wrong fs type, bad option, bad superblock on /dev/hdd2,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Quote:
mount -t ext3 /dev/hdd2 /second
mount: wrong fs type, bad option, bad superblock on /dev/hdd2,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Also I tried to add it to /etc/fstab but it says the same error, Disk /dev/hdd2 doesn't contain a valid partition table... I am able to mount /dev/hdd1 successfully.
when i try to Terminate an Account this message appears
The /var partition on this server is running out of disk space. WHM operation has been temporarily suspended to prevent something bad from happening. Please ask your system admin to remove any files not in use on that partition.
i know its coz the /var is full
Filesystem Size Used Avail Use% Mounted on
/dev/sda5 9.9G 1.6G 7.8G 17% /
/dev/sda1 99M 21M 73M 23% /boot
/dev/sda7 198G 32G 157G 17% /home
/dev/sda3 9.9G 3.5G 6.0G 37% /usr
/dev/sda2 9.9G 9.3G 121M 99% /var
/dev/sdb 231G 103G 116G 48% /backup
none 2.0G 4.0K 2.0G 1% /tmp
none 2.0G 0 2.0G 0% /var/tmp
none 2.0G 0 2.0G 0% /dev/shm
the var is 99%
I have had over 4 different VPS providers and in all of them, I was always using less than 5 gigs and most of it is from the OS and the VPS files, my website is less than 400 megs of size including the backups. For some reasons, my Disk Quota is at 8.3 gigs and it was at 8.2 gigs yesterday. My website's files are not that big and the Database is like 30 megs and the backups are compressed so they are like 4 megs. The problem is that I really don't know what files are making my Disk Quota to go up since I haven't uploaded anything or download files to my VPS.
View 6 Replies View RelatedIs there way to show the memory usage of the server in PHP?
The server is a VPS on Virtizzio(or whatever its called).
I want to make a little WAP page I can access on my mobile to show the servers CPU and Memory usage.
I already know how to show the CPU load.
OK, seems owner can be seen when api is set to CGI :-)
View 0 Replies View RelatedIt is possible to show resources usage stat. to customers?
Any addons & scripts?
This is very important function, but cpanel didn't have it.
I created same thread to forums.cpanel.net but no replies.
Few months ago I bought new small VPS box (OpenVZ, 128 MB RAM) in order to place there a new monitoring node of my site monitoring system. Such small amount of RAM is a challenge for operating system optimisation techniques (OpenVZ doesn’t have “swap” as Xen does).
First of all I discovered that apache2-mpm-worker (Apache implementation that uses threads) consumes more memory (100MB) than the classic version that use separate processes (20MB). I had to switch to apache2-mpm-prefork version then.
Next unpleasant suprise: small Python app eats 100MB of virtual memory! I checked that virtual (not resident) memory is taken into account by VPS. I applied some tools to locate memory bottleneck, but without success. Next I added logs with current memory usage to track call that causes big memory consumption. I tracked the following line:
server = WSGIServer(app)
is guilty for high memory increase. After few minutes of googling I located problem: default stack size for a thread. Details:This line creates few threads to handle concurrent calls
Stack size is counted towards virtual memory
Default stack size is very high on Linux (8MB)
Every thread uses separate stack
=> multi threaded application will use at least number_of_threads * 8MB virtual memory!
First solution: use limits.conf file. I altered /etc/security/limits.conf file and changed default stack size. But I couldn’t make this change to alter Python scripts called from Apache (any suggestions why?).
Second (working) solution: lower default stack size using ulimit. For processes launched from Apache I altered /etc/init.d/apache2 script and added:
ulimit -s 256
Now every thread (in apache / Python application) will use only 128 kB of virtual memory (I lowered VSZ from 70 MB to 17 MB this way). Now I have additional space to enlarge MySQL buffers to make DB operations faster.
There’s even better place to inject ulimit system-wide: you can insert this call in:
/etc/init.d/rc
script. Then ulimit will be applied to all daemons (as Apache) and all login sessions. I reduced virtual memory usage by 50% this way.
Note: you may increase stack size on stack overflow errors. In my opinion 256 kb is safe option for most systems, you may increase if in doubt. Still memory savings are big.
In the last two weeks I have noticed a major issue concerning memory usage. HyperVM and Top (via console) report two very different amounts of memory being used. On a fresh rebuild, my overall usage should be no more then 22mb. However, HyperVM reports 45mb whereas Top reports 11mb. Notice the huge gap?
I was told by my VPS host that OpenVZ / HyperVM is to blame. The overwhelming issue is: if I pay for 256mb of ram and I'm being cut short, then I'm obviously over paying. What's more: how can I tell whether or not I'm being cut short?
Has anyone run across these problems in the last two weeks?
My VPS host is (for now) still using LxAdmin, but is no longer allowing login to HyperVM for reboots and access to system info. Please, tell me exactly how to use SSH to check the current memory usage on my VPS.
Quote:
Viewing your current resource usage
Log in via SSH, I normally use the Putty client for this.
Commands:
top: your current server load & resource usage.
ps aux: all your processes & which ones are using the most memory/cpu
free -m: allocated memory, usage & free memory
Is the command line really *easy* once you get used to it?
Is it possible to get current CPU usage from mod_status on Windows? I thought it's ExtendedStatus On directive required but still no CPU usage.
View 7 Replies View RelatedHow do you add more server status services? Like how do you add like "exim" to show that it's up and running or something like http, ftpd etc..
How do you get things like that to show up showing green under server status?
i Have 2 vps From Swvps and HostForWeb
When Finish Transfer Old VPS( HostForWeb ) To New VPS (Swvps.com) and See Disk Usage
Swvps=> 13 gig Usage
HostForWeb=> 23 gig space!
I'm having a problem with my /usr. When I check it through WHM it's 100% full. But when I check it through SSH ( du -sh /usr ). it's almost 50% full
is there a way to let WHM recalculates the disk usage for /usr.
i already tried to empty it. but the 100% in WHM never changed. I deleted about 3GB of files. but in WHM, still saying 9.4GB used from 9.9GB
I am getting problem , my package is 500MB and i have checked cpanel > file manager , there is showing disk usage 350 MB but there is no file under public_html/ and out of public_html/ directory , what can i do and why this is showing 350 MB disk usage but there is no files.
View 9 Replies View Relatedwhm only shows this in server information area > disk usage
Code:
Filesystem Size Used Avail Use% Mounted on
/usr/tmpDSK 243M 4.4M 226M 2% /tmp
/tmp 243M 4.4M 226M 2% /var/tmp
It is not showing actual disk space for sda1/sdb1
I restarted crond and that did not fix it, nor forced cpanel update.
I recently had to do an OS reload on my server box and when i restored all the accounts, they are all viewing as using 0mb of space.
View 7 Replies View Relatedmy vps virtuozzo indicates that my disk usage is full. However, my only 1 site is using only a few gig.
what should i do? what folder should i safely delete to free up some space?
etc, dev? or maybe tmp?