I have two servers. One hosts about 55 small sites and the other does nothing.
Can I make use of the spare one to take over automatically if the main server fails for whatever reason?
I had been thinking of using Rsync to backup accounts / mail every 6 hours or so and then manually changing the nameservers on the domains in the event of server1 failing. Would that even work? Then I got thinking about it all being automatic.
We have 2 linux servers with plesk. We want Redundant Dns and backup mail servers for our hosting domains. We already setup Primary nameserver ip address is first server, Sec Nameserver ip address is second Server. like
ns.ourdomain.com - first server ip address
ns1.ourdomain.com - Second server IP Address
and how can setup backup mail server for both servers
I have a LAMP server running and would like to have the exact mirror running on another location. I would like to sync the web files and database in either real time (upon any update) or in delayed mode (x minutes after the update).
For MySQL, I believe replication can do the job unless anybody has better recommendation. What would you guys suggest for web files? Can I use different Linux flavor but maintain back the same LAMP version?
Is there any "online" 3rd party load balancing service that I could use to load balance the traffic to both servers?
I have registered a domain using godaddy. I have hosted my site on a server of my shared hosting provider(lets call them X).Currently I have pointed mydomain.com to the server and it is up and running.Sometimes, I have experienced downtimes.
In order to solve this problem, I have hosted a clone of my site on another server from another hosting company(lets call them Y).
1. I want mydomain.com to point to Y when X is down
2. again point it to X when it is up.
My main aim is to have my site live with less downtime. The probability having both servers down is very less.
I dont know if it is technically feasible, just a thought out of dirty mind. I tried to google but was not able to find an answer specific to my problem.
Can anybody tell me how to achieve this through godaddy domain.
Added note, My site is not a commercial site and I cant afford large dedicated servers with clustering and failovers.
I have been working on and designing a hosting company. Now setting up my names servers has came to a question. When I ran a previous business with a partner he only use Name Servers on 1 Machine in 1 location.
Now my question is my first server is going to be located in New Jersey, USA . So that is where My first set of DNS starts. With my previous partner I noticed most of the customers were based in Europe, Philippines, etc. Over seas. Now What I am asking is Will a VPS in a different location work for DNS Server. That way I can keep a lower budget till we get a few customers under out belt.
Because of the attack on theplanet yesterday, my sites were down.
People are mentioning adding "redundant DNS servers" to protect against downtime in future attacks.. but I haven't found any info on how to set these up.
I also seen somebody post that the planet doesn't allow "zone transfers" so I'm a bit confused at how to proceed.
I just registered an account at [url] and I'm unsure on where to begin. Their FAQ is just a large photo.
My .com is registered at Godaddy. Do I edit records at godaddy to point to the server IP? Or do I have to edit records via WHM?
I currently run spiderloop.com a SEO control panel designed for windows hosting accounts. The site and web service is hosted on our own server and works great, however I am concerned about redundancy and do not want to purchase a whole other server just to be fail safe. So I am going to purchase a shared hosting account to facilitate redundancy.
So here is the question.
How do I do it? How do I set up my current host to redirect to the new host when it goes down?
If the current host has problems how can I force the users browser to redirect to the redundant host? I simply don't understand.
I have a renewal bill for my hosting account, but I can't see if I have any domains in it and therefore not sure if I should cancel it or not. I am with bright-byte.
Can I do a domain tools reverse search or something on the domain so it can tell me which of my domains are with that host?
I've decided to move from managed hosting to colocated hosting and I'm in a bit over my head as far designing the server configuration goes. I'm looking for assistance with setting up a fully redundant configuration with no SPOF (single point of failure).
The colo provider ensures full redundancy to the cabinet, terminating with two network drops from diverse bandwidth providers and HSRP. I need to eliminate all SPOFs inside the cabinet.
Some questions...
1) I'm thinking of using the Cisco 2960 Series switch as the in-cabinet distribution switch. I believe it supports HSRP. From my understanding, the switch will automatically failover from one uplink to the other in case of a network problem on one of the uplinks, and this will all be transparent to any servers connected to the switch. Is this correct?
2) However, this introduces the switch as SPOF. So, I believe what I need to do is ask the colo for a second pair of network drops and deploy a pair of 2960's. Then I would connect each server to both switches via separate NICs. Is this correct?
3) Finally, assuming I am on the right track here, I would like this to all be transparent and automatic with no human intervention required to recover from a switch failure. The servers will be running RHEL 4. How would I configure the network interfaces on the servers so that they can transparently use either (or both) of the switches? Is there some way to assign the same IP address to more than one interface? How does the OS keep from getting confused about where to send the traffic?
Thanks in advance for any insight. I would also be happy to hear recommendations for excellent network consultants that I could hire to design and implement this configuration for me.
I have a few VPS's, the main one has cPanel/WHM and runs all my sites / email / DNS and MySQL DB's. Heres a little info:
VPS1 - CentOS 4.4, cPanel/WHM, runs all domains (OpenVZ)
VPS2 - CentOS 4.4, Webmin, Slave DNS to VPS1 using Webmin cluster (OpenVZ)
VPS3 - CentOS 4.4, Webmin, Slave DNS to VPS1 using Webmin cluster (Xen)
However, if VPS1 fails for say 24 hours, im screwed!
So, my question is can I get some kind of redunadancy built in somewhere. For example if someone is trying to access my domain "mydomain.com" and the main VPS is down, then the request for the site would go to VPS2, or VPS3...
The same for the mail server, if some is sending mail to one of the domains on the VPS, and the main VPS was down, the mail would be sent to my other VPS's.
I just don not like the fact there is a single point of failure!
I do have WHM managed Weekly and Monthly backups of all cPanel accounts etc.
We are a hosting company in Colombia, and we want start selling corporate email service.
The main idea is have two servers with redundance, I think this servers have to share the filesystem I don't know if using a scsi disk or just a network file system. We also want to have a good appliance for stop the SPAM, Im not so sure if we need to have redundance on it, its ideal but we are just starting the bussines and we dosn't have cliets yet.
Can anyone share their setup with us, and give us recomendations or tips?
Another option is, if someone know how to do that and have implemented this setup before and want to work $$ with us to implement that, please contact me to jbravo[at]colombiahosting.com.co
to setup a Windows server that can support the failure of the switch that comes before it in the network diagram. The idea would be that if the 15A circuit the switch was on failed, or the switch just died, the server would still be online.
I already have two switches in spanning tree just before the server. Is there a way to assign a single IP to the server on both its network cards and connect each card to a different (spanning tree'd) switch?
I'm upgrading my server again and now that we have 8 disks we need to upgrade our power supply (I was told).
But do I really need a redundant power supply Or can I just buy ONE 650 watt to upgrade?
These are my current server specs:
Quote:
2 X AMD opteron 270 dual core
2 X 2 GB kingston PC3200 DDR ram
2 X 1 GB kingston PC3200 DDR ram
(6 GB total)
8 X seagate cheetah 15k.5 SCSI 73.4 GB, U320, SCA in raid 10
1 X LSI megaraid 320-2x raid controller, dual channel
1 X Tyan thunder 8KSE (s2892) mobo
1 X 2 * 4 port chenbro scsi backplane (8 ports total)
2 X AMD CPU cooler
2 X 40X40X10 fans
(Currently 1 X zippy P2G-6510P, 2U, single power supply, 510 Watt)
1 X Sony FDD 1.44"
1 X chenbro RM311, 3U case with 8 hot swap bays
1 X LG DVD/CD-rom burner
I'm in the process to setup a new service with an ISP with the following scenario and need your help.
I've got the rack (42U), servers and switches. Only routers has been left and here is that I need your help.
I have also 2 ports from the ISP where I can connect my routers. I need to get 2 router devices with auto sync feature in order to be able to setup a redundant plan in case that one of them goes down.
Those routers should have firewall features too in order to avoid setup iptables rules for each server. A basic DDoS protection is needed too.
I'm going to push around 100Mbit of traffic across the servers but that will happen after 3-4 months from the initial setup. In the first instance no more than 10-20Mbit will be used.
I heard a lot about Cisco but got no idea what model is the most suitable for my case. I will probably need a module for DDoS attacks and another one for advanced security IOS from what I read but it is not clear to me.
Looking for redundant setup, round robin?
I'm looking to make high availability setup, and wondering how many of you have made it so?
we are looking to multi-home the page with a round robin setup, using multiple VPSs/dedicated servers geographically different locations.
Right now i'm still looking at "stale" DNS setup, no automanagement of servers down. Is there a service/software which already offers automatic changes of zones for removing servers which are down, and adding them back when they get back online?
Do i need to custom tailor everything?
I have a DB server, running mysql 64bit. I would like to add another server to the mix to build some kind of redundancy if the 1st one were to go down.
View 7 Replies View RelatedI currently own several servers: let's say sites on 3 of those servers rely on a website that sits on server 4
If server 4 goes offline, then servers 1 2 and 3 suffer a lack of usability.
The website on server 4 is very small and fast, but receives several hundred thousand visits a day
I figured it would be a good idea to replicate that website on each of my servers, but I'm unsure about how to set up a good redundancy system..
Using several nameservers doesn't work as expected (visitors are randomly sent to one of the nameservers, in no particular order)
So the rule of thumb is if you have a 30A circuit to not exceed 80% or 24A.
If I buy a 30A circuit, I am assuming it is protected by a circuit breaker that is 30A, correct?
In *theory* we could run 29-30A all day and be fine.
So, I understand, the rule of 80% to be to the effect that "during startup, equipment uses more power ... or during runtime if it heats up, the fans go faster using more power" so it is safe to be at 24A in case you get spikes to 27-29A.
Is my reasoning correct?
Further, if you run primary/redundant circuits, is there really harm in running 13A on one circuit and 14A on the other.. and in the unlikely event of a failure, you are running 27A on one circuit (at 90% instead of 80%).
Any thoughts on this? Getting an extra 3A out of a 208V circuits is like putting in 3-4 more servers. If someone is doing this please let me know. I think it would work fine but i would like to know from the experts that do the colo stuff for a living what problems i could encounter, if any.
Who are the reputed hosts in the market that comes with "Lightspeed Host with Redundant Servers"?
View 14 Replies View Relateda dell 1750 with redundant power supply that has two plugs on the back.
But...
Looking at 1U colo with only one plug available for the 1U price.
Is the only solution to use only one of the two power supplies in the Dell 1750...?
do dual power supplies use more power than a single supply?
E.g. Say I have a server than uses two amps, powered by a single power supply. Now if I switch to a dual supply (and say each supply has the same efficiency rating as the single), does my server use more power? How much more?
My simple view of this is that it probably does, but maybe not much. The second power supply consumes some power itself, but since its not under load, it doesn't consume much. Therefore, my server with redundant supplies might use 2.1A or 2.2A.
I've got a VPS which is serving as the main server for a number of sites. Web Server, SSH Server, and Mail Server.
What I've got running:
Apache2, PHP5, MySQL5, Dovecot, Postfix
One of the sites is a growing forum with a MASSIVE photo album. This is the site where I notice the most slowness.
Changing the server software is not an option - Only optimization.
Quote:
Originally Posted by httpd.conf
ServerTokens OS
ServerRoot "/etc/httpd"
PidFile run/httpd.pid
Timeout 300
KeepAlive Off
MaxKeepAliveRequests 100
KeepAliveTimeout 5
<IfModule prefork.c>
StartServers 8
MinSpareServers 8
MaxSpareServers 13
ServerLimit 256
MaxClients 256
MaxRequestsPerChild 50
</IfModule>
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>
Listen 80
LoadModule auth_basic_module modules/mod_auth_basic.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule authn_file_module modules/mod_authn_file.so
LoadModule authn_alias_module modules/mod_authn_alias.so
LoadModule authn_anon_module modules/mod_authn_anon.so
LoadModule authn_dbm_module modules/mod_authn_dbm.so
LoadModule authn_default_module modules/mod_authn_default.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_user_module modules/mod_authz_user.so
LoadModule authz_owner_module modules/mod_authz_owner.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_dbm_module modules/mod_authz_dbm.so
LoadModule authz_default_module modules/mod_authz_default.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule logio_module modules/mod_logio.so
LoadModule env_module modules/mod_env.so
LoadModule ext_filter_module modules/mod_ext_filter.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule expires_module modules/mod_expires.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule info_module modules/mod_info.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule cache_module modules/mod_cache.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule cgi_module modules/mod_cgi.so
Include conf.d/*.conf
User apache
Group apache
Quote:
Originally Posted by my.cnf
[mysqld]
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
# Default to using old password format for compatibility with mysql 3.x
# clients (those using the mysqlclient10 compatibility package).
old_passwords=1
[mysql.server]
user=mysql
basedir=/var/lib
[mysqld_safe]
log-error=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid
I looked a lot - can not find solution ....
I want to transfer a file from [url]to [url]or [url]Without it will pass my localcomputer (slow upload)
It can be also a script i will install like this one - this is only for images
[url](remote)
I have Plesk 11.5 (service provider mode) on a Windows 2008 server IIS7.Most of my sites are developed in .asp and therefore i use a custom 500-100.asp error page that check s the IP of the visitor then displays either a friendly error, or if its my IP a full error of what has happened (it also emails me the error). This allows me to debug pages easily whilst developing and to keep an eye on anyone trying SQL Injection hacks on my sites (as the error and email also have session variables and IP address).I dont have root access to the server as it is a Webfusion dedicated server.I have following the Plesk documentation -
1) Switch on custom errors for the subscription
2) Look in virtual directories and navigate to error documents
3) Find the error in question (500:100) and change it to point at either a file or URL
FILE - I had the data centre add in the 500-100.asp error page in to the virtual template so that my page is available in the list of virtual files - this didn't work but that maybe because its not a static page??
URL - when i add the path it says its incorrect, if i add a fully qualified address, it accepts it but it doesn't work.give me a specific example of the URL that can be entered relative to the root as the format in the documentation isn't accepted. The last step is to restart IIS which is also an issue as i cant seem to do this from the Plesk panel..It is as if it isn't catching the 500:100 error, and only catching the general 500 error??
I am currently running Google Analytics/Urchin 5 (v5.7.02), on a server, the server has started to act up, (on its last legs etc) and now I am trying to transfer the Urchin Software to a new server, where it would work effectively.
However upon installing the urchin software on the new server and running it (localhost:9999), I am presented with An Action Items Page, and these following choices
Obtain Demo License
Buy License
Activate Pre-Purchased License
I choose ‘Activate Pre-Purchased License’ pop in the Serial number and complete the registration then…
---------------------------------------------------------
Urchin Licensing Center -- Error!
An error has occured during your transaction, please use the back button and correct the problem. The specific error message is:
• Unable to generate a license. Some possible reasons:
Your serial code is currently active <<< How do I disable it and use it on another server?
---------------------------------------------------------
So all I want to do is deactivate the serial and reactivate it on another server.
Does anyone have experience with this or a similar problem or have a solution to this problem. Any help be most appriciated.
Or even a Contact Number so that i can get some one over the phone!
This is the scenario, domain.com are setup on server1, however server2 also has the same profile of domain.com as we use ns3 and ns4 using domain.com. This works fine with the nameserver setup on server2.
However I encounter problems as the emails from server2 won't reach server1 as there are duplicate profile on server2.
My question is how do I setup the DNS in cpanel/whm from server2 so the emails from server2 will reach server1?
Server1 (www.domain.com)
ns1.domain.com
ns2.domain.com
Server2
ns3.domain.com
ns4.domain.com
I just want to use a server for file sharing, it will have nginx and that's it. I'm looking at centos, or freebsd, but I been using centos forever now and I'm not sure how to use freebsd, should I just stay with centos?
Do I tell my hosting provider to just install the OS and give me ssh action and that's it? Don't install any control panels or any other stuff? I want one domain and one subdomain on it though and ftp action.
Remote Spamassassin for Multiple Smartermail Server
I want to setup Remote Spamassassin(On Linux) for Multiple Smartermail servers. I want to the setup the spamassassin on a linux box
How i can setup this with multiple smartermail servers.
what is the fast and best way?
View 4 Replies View Related