I started out with xxx.com and the VPS server's name, dns, etc, is xxx.com. I have since sold off xxx.com and would like to set up yyy.com on this VPS.I need the VPS to be clean (all files, databases, ftps, etc to be deleted) with the servers name changed and set up so that the dns server's name will be yyy.com instead of xxx.com.
Can it be done without asking my host to do it cos they are charging me $75/hr for that and an extra $35 to rebuild the VPS!
If any one can assist me on this or even charge me a small fee to get this done for me, I will be extremely greatful! This is the first time I am using a VPS and I have no idea how to do such things!
I have a Windows 2000 server running Raid 1 software raid. Recently, one hard disk in the mirror crash, I replace another trying to build the mirror. Problem is the existing hard disk has a few bad blocks, even after chkdsk it still failed to rebuild the software raid, error msg was due to bad blocks in the existing hard disk.
I am skeptical of running mchk on my server and messing something up. I am having an issue with one domain hosted on my server getting 100's of duplicates from certain domains. My MagicSpam logs show that the email is sent to my server anywhere from every 15 minutes to 1 hour. It started out as one domain sender to my server to my client, now it is happening to a bunch of sending domains.
I had an hosting account with a copany, recently I migrated to VPS managed by plesk 11.5..I was able to get the awstats database file from the old host, and i have copied them in the /var/www/vhosts/mydomain.com/statistics/webstats/ folder, together with the other database files genereted by the new VPS hosting
Only problem is that plesk only rebuilds everyday the static page for the current month, and I see no way to ask him to build the pages for this past months. Also would be good if he would rebuild the header to have updated the dropdown menu from which to choose the month to dispay..Is it possible to rebuild manually these static pages?
--> Populating transaction set with selected packages. Please wait. ---> Package cadaver.i386 0:0.22.5-1.el5.rf set to be updated ---> Package mtr.i386 2:0.72-1.el5.rf set to be updated ---> Package rsync.i386 0:3.0.2-1.el5.rf set to be updated ---> Package nmap.i386 2:4.20-1.el5.rf set to be updated ---> Package lftp.i386 0:3.7.1-1.el5.rf set to be updated ---> Package syslinux.i386 0:3.63-1.el5.rf set to be updated ---> Package dkms.noarch 0:2.0.19-2.el5.rf set to be updated ---> Package subversion.i386 0:1.4.6-0.1.el5.rf set to be updated --> Running transaction check --> Processing Dependency: perl(Crypt:asswdMD5) for package: syslinux --> Finished Dependency Resolution Error: Missing Dependency: perl(Crypt:asswdMD5) is needed by package syslinux
Other Details: eth0: error fetching interface information: Device not found cp: cannot stat `/etc/apf.bk.last/vnet/*.rules': No such file or directory Imported options from 9.7-1 to 9.7-1. Note: Please review /etc/apf/conf.apf for consistency, install default backed up to /etc/apf/conf.apf.orig my host has said Code: edit the apf.conf file to venet0:0 instead of eth0 which ive done and im still getting the error, Ive pasted my current conf.apf config below
Code: #!/bin/sh # # APF 9.7 [email@example.com] # Copyright (C) 1999-2007, R-fx Networks <firstname.lastname@example.org> # Copyright (C) 2007, Ryan MacDonald <email@example.com> # This program may be freely redistributed under the terms of the GNU GPL # # NOTE: This file should be edited with word/line wrapping off, # if your using pico/nano please start it with the -w switch # (e.g: pico -w filename) # NOTE: All options in this file are integer values unless otherwise # indicated. This means value of 0 = disabled and 1 = enabled.
## # [Main] ## # !!! Do not leave set to (1) !!! # When set to enabled; 5 minute cronjob is set to stop the firewall. Set # this off (0) when firewall is determined to be operating as desired. DEVEL_MODE="1"
# The installation path of APF; this can be changed but it is not recommended. INSTALL_PATH="/etc/apf"
# Untrusted Network interface(s); all traffic on defined interface will be # subject to all firewall rules. This should be your internet exposed # interfaces. Only one interface is accepted for each value. IFACE_IN="venet0" IFACE_OUT="venet0"
# Trusted Network interface(s); all traffic on defined interface(s) will by-pass # ALL firewall rules, format is white space or comma separated list. IFACE_TRUSTED=""
# This option will allow for all status events to be displayed in real time on # the console as you use the firewall. Typically, APF used to operate silent # with all logging piped to $LOG_APF. The use of this option will not disable # the standard log file displayed by apf --status but rather compliment it. SET_VERBOSE="1"
# The fast load feature makes use of the iptables-save/restore facilities to do # a snapshot save of the current firewall rules on an APF stop then when APF is # instructed to start again it will restore the snapshot. This feature allows # APF to load hundreds of rules back into the firewall without the need to # regenerate every firewall entry. # Note: a) if system uptime is below 5 minutes, the snapshot is expired # b) if snapshot age exceeds 12 hours, the snapshot is expired # c) if conf or a .rule has changed since last load, snapshot is expired # d) if it is your first run of APF since install, snapshot is generated # - an expired snapshot means APF will do a full start rule-by-rule SET_FASTLOAD="0"
Usually everything has been working fine with this .htaccess-file until today. There hasn't been any change on the system.
If you click on the hyperlink to the restricted area the login window appears where you need to type in your username and a password. After typing in these data the following message appears in the browser:
500 Internal Server Error
The server encountered an internal error or misconfigruation and was unable to complete your request. (…)
The apache error log file contains the following message:
Request exceeded the limit of 10 sub request nesting levels due to probable configuration error.
Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace.
The increase of the LimitInternalRecursion does not solve the problem. So I switched the LogLevel in the httpd.conf file from warn to debug and looked again on the entries of the error log.
The following appeared (I have replaced ip addresses, usernames and URL by xyz or <URL>) :
[error] [client xyz] mod_digest_apple: Client is using a nonce not issued by this server for this context:/rb/Vorlesung/WS12/Downloads/, referer: http:<URL>
I am using fedora 7 and when i fire "yum localinstall dovecot-*" it gives error. Could not retrieve mirrorlist [url]Error was [Errno4] IOError:< urlopen Error (110,'connection timed out')> Error:cannot retrieve repository metadata (Repomd.xml) for repository:fedora
Here are my settings in the /etc/php5/apache2/php.ini file:
display_errors = On display_startup_errors = Off log_errors = On log_errors_max_len = 1024 ignore_repeated_errors = Off ignore_repeated_source = Off report_memleaks = On error_log = /var/log/php5/error.log
However unfortunately I never see any error log being generated in the /var/log/php5/error.log file?
Also with my shared hosting site one thing which I noticed was, due to some configurations set by them, the error.log used to generate in the folder where the error occured. This is a cool thing which they used to do, but I just dont understand how did they do that.
In my move away from proprietary CP not configured for my needs and over which I have little control, I'm uninstalling them from my servers. On one of my VPS, I reinstalled the OS, CentOS 5.2 and am trying to prepare for an upgrade to CentOS 5.3 (and installs of new mailserver, webserver, CP and DNS server) by doing the required software updates on the server. However, I keep getting nearly the exact same error, outputting the exact same files. In this case, I'm trying to install "vim-minimal" for bash since I'm having bash problems, too:
-bash-3.2# yum install vim-minimal Loaded plugins: fastestmirror, protect-packages Loading mirror speeds from cached hostfile * rpmforge: fr2.rpmfind.net * base: ftp.nluug.nl * updates: ftp.nluug.nl * addons: ftp.nluug.nl * extras: ftp.nluug.nl Setting up Install Process Parsing package install arguments Resolving Dependencies --> Running transaction check ---> Package vim-minimal.x86_64 2:7.0.109-4.el5_2.4z set to be updated --> Processing Dependency: libc.so.6(GLIBC_2.2.5)(64bit) for package: vim-minimal --> Processing Dependency: libc.so.6(GLIBC_2.3.4)(64bit) for package: vim-minimal --> Processing Dependency: libc.so.6(GLIBC_2.4)(64bit) for package: vim-minimal --> Processing Dependency: libacl.so.1(ACL_1.0)(64bit) for package: vim-minimal --> Processing Dependency: libc.so.6(GLIBC_2.3)(64bit) for package: vim-minimal --> Processing Dependency: libc.so.6()(64bit) for package: vim-minimal --> Processing Dependency: libacl.so.1()(64bit) for package: vim-minimal --> Processing Dependency: libtermcap.so.2()(64bit) for package: vim-minimal --> Processing Dependency: libselinux.so.1()(64bit) for package: vim-minimal --> Running transaction check ---> Package libtermcap.x86_64 0:2.0.8-46.1 set to be updated ---> Package glibc.x86_64 0:2.5-34 set to be updated --> Processing Dependency: glibc-common = 2.5-34 for package: glibc ---> Package libselinux.x86_64 0:1.33.4-5.1.el5 set to be updated --> Processing Dependency: libsepol.so.1()(64bit) for package: libselinux ---> Package libacl.x86_64 0:2.2.39-3.el5 set to be updated --> Processing Dependency: libattr.so.1(ATTR_1.0)(64bit) for package: libacl --> Processing Dependency: libattr.so.1()(64bit) for package: libacl ---> Package glibc.i686 0:2.5-34 set to be updated ---> Package libselinux.i386 0:1.33.4-5.1.el5 set to be updated --> Running transaction check ---> Package libattr.x86_64 0:2.4.32-1.1 set to be updated ---> Package libsepol.x86_64 0:1.15.2-1.el5 set to be updated ---> Package glibc-common.x86_64 0:2.5-34 set to be updated --> Finished Dependency Resolution
I just put a new server and testing a few sites on there but for some reason I cannot get them up. The sites will not appear in the browser despite being propagate for over 24 hours. I just attempted to delete and then re-add a dns zone for one of the accounts and I got the following message in whm...
Add a DNS Zone Results of adding zone [url] Zone created successfully for IP Zone is owned by system
The same IP that its trying to add is listed in WHM under " Main >> Server Configuration >> Basic cPanel/WHM Setup" under the 'Main Shared Virtual Host IP' option. What am I missing here?