Is it possible to enable postfix address extensions while still having "What to do with mail sent to nonexistent users" set to "Reject"? I am trying to get confirmation to work where we have:
Code : user@domain.com
as a valid mailbox. I want emails addressed to
Code : user+confirm+2945o2419485@domain.com
to be also delivered to user@domain.com. But its being blocked by the plesk delivery service. Is there a way to get around that? FYI - the numbers are dynamically generated, so setting up an alias for that specific address will not work.
I know they're just self signed certs on the postfix mail servers used in PPA, but how can I renew them, customer was cautious about it once they saw it had expired.
I have found this: [URL] .... and was wondering is this the correct procedure to update the SSL cert?
How can we add a range of IPs say x.x.x.1 - x.x.x.250 and exclude certain IPs within this range?Say x.x.x.10, x.x.x.15, x.x.x.17, and so on, must be reserved and not used by PPA. If this is not possible, can this please be implemented?
I'm attempting to run PPA on Azure but I only have one IP to work with, the public IP address. It's not possible to communicate between servers using the internal IP addresses as they are not necessarily on the same sub net. How can I get PPA and service nodes running on a single IP address per machine?
An example of the error I get when setting up a service node is
Failed to execute command 'cscript /Nologo http_download.js http://<private ip address>/tarballs/Win32Bin/support.cab'. Check logs in 'c:POA_Deploy' at host '<public ip address>' for more details about the reasons of failure.
Is it Normal that NAT / Internal IP Address shows up in customer panel ? It shows up in the detail page of Web Hosting Access, detail page of Mail Settings and on the detail page of Adding new databases.
DNS and on the section of Web Hosting Access in the front page of Websites and Domains are showing the correct public IP address
Attached is one of the screen that I'm talking about (Web Hosting Access)
My issue started ince a couple of months seemed to increase with update to Plesk 12.0 (though I can't guarantee it).I am using Centos 6.5, all updated. What happens is that postfix usage starts to increase without any apparent reason (during week-ends for example). Then postfix is not responding anymore.
[LOGTEE]: Error Downloading Packages: [LOGTEE]: [LOGTEE]: libuuid-2.17.2-12.18.el6.i686: failure: Packages/libuuid-2.17.2-12.18.el6.i686.rpm from base: [Errno 256] No more mirrors to try.
On a clean install of CentOS 6.6 (Final) I did the following:
1. updated the /etc/hosts file to point my ip to the hostname
2. Open the ports in the iptables file.
3. ran the ppa_installer per the instructions on [URL] ....
The ppa_installer log says installed Successfully. However the following occurs:
1. Cannot browse to the url:8443, or any of the other variations (8080, 8880, https/http)
2. Yum installer is now broken (I replicated this twice). Yum will not run at all with the following error:
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: /usr/lib64/libcurl.so.4: file too short
Please install a package which provides this module, or verify that the module is installed correctly.It's possible that the above module doesn't match the
current version of Python, which is: 2.6.6 (r266:84292, Jan 22 2014, 09:42:36) [GCC 4.4.7 20120313 (Red Hat 4.4.7-4)]
I am now going to try Cent OS 6.4.. will report back.
We can't install or remove any extension after upgrade to Plesk 12.0.8 from 11.5. When we go to Extensions Management > Add Extension for uploading a new extension, we are only allowed to use .deb and .zip. Before we had rpm and zip. This upgrade has been done on a Linux Server with CentOS installed (rpm based). How can we change the allowed extension for uploading an rpm file?
OS : centos 6.5 2.6.32-431.23.3.el6.x86_64 actual plesk version 12.0.18 after auto-update google authentication and 3other extensions were enabled and now google authentication isn't in the list of installed extensions and not functioning i was able to login as before without google authentication but when I wanted to reinstall the extension catalog shows a empty screen I have ran /usr/local/psa/admin/sbin/autoinstaller --select-release-current --upgrade-installed-components & /usr/local/psa/bootstrapper/pp12.0.18-bootstrapper/bootstrapper.sh repair no luck where to look or to reinstall the extention catalog ?
I would like each of my clients who have a dedicated IP address and an SSL certificate to be able to use their own domain name (and own certificate) when sending mail on ports 465 or 587. I have managed to change the default certificate used by Postfix to my own server's certificate, but I want users to use their OWN IP address and SSL certificate when sending, so this is not an option.
I have been able to update Dovecot to use a specific certificate for each IP address, but I can't seem to update Postfix. I was trying to follow these instructions but my postfix master.cf was quite different than the poster's file and I didn't succeed: [URL] ....
I know many people will simply say "it can't be done" or "just get the users to use the shared IP address", but I know there must be some workaround to make this work, even if it means manually updating the config file after every Plesk update. I'm even prepared (if possible) to have Plesk abandon management of Postfix and have me manage it manually, if that's even an option.
Each migration in the last years I'm running into this bug that Postfix wants to run on port 587 even though this is turned OFF in the Plesk Panel.
Sometimes it does this after some update.
Because another process is running on port 587 this means that postfix does not start and I have some downtime until I "repair" this.
"Repairing" means going into Plesk panel and turning ON SMTP-Auth.... Wait a moment for it to apply and then turning it OFF again....
This unwanted behaviour can be easily reproduced by having this option turned off in the Plesk panel and then running /usr/local/psa/admin/sbin/mchk --without-spam
This will end up in a non-running postfix if another process is already running on port 587.
This shouldn't be happening. Especially because I reported this behaviour years ago..
on a fresh debian 7 64bit openvz system we actually have a problem with the new plesk 12 feature of limiting outgoing mails.We migrated about 25 systems to plesk, this is the first that makes problems.If limiting outgoing mails is activated (i double-checked all possible checkboxes in plesk) a fresh mailbox gives us the following error while trying to send via smtp:
Aug 15 13:09:32 2d4 postfix/smtpd[8645]: connect from unknown[XX.XX.XX.XX] Aug 15 13:09:32 2d4 postfix/smtpd[8645]: E9AF61C58851: client=unknown[XX.XX.XX.XX], sasl_method=PLAIN, sasl_username=XX@XXX.XX Aug 15 13:09:32 2d4 greylisting filter[8651]: Starting greylisting filter... Aug 15 13:09:32 2d4 /usr/lib/plesk-9.0/psa-pc-remote[8611]: handlers_stderr: SKIP
[code]....
After deactivating the feature all mail is sent without any problems. We use postfix + dovecot.
There are several big domains that frequently defer accepting mail from us causing long delays or rejections. Google, AOL, and Yahoo are examples. I'm considering trying the suggestions found in this online posting regarding rate limiting the sending of messages to those domains. In the below URL, please see the section titled "Different policies for different domains"...URL....
Would these changes be safe to make on a CentOS 6.4 server running Plesk 11.0.9 with Postfix 2.8.4? Would any special modifications for Plesk be necessary?
At this moment, all mail (no matter what domain) goes out straight to its destination. We want to send the mail trough a antispam firewall before it enters the internet.
I am unable to switch from qmail to postfix via the control panel. It opens a new window that just hangs and never loads. While waiting for it to load, I see these 2 processes running..
But after waiting 20 minutes, the browser never loaded and the two proceses remain. So I killed both processes and removed /tmp/psa-installer.lock and started again. The same thing happened.
Is there a way to fix this? If not, is there an easy way to switch MTAs from the command line?
I just upgraded my Plesk 11.5 on Plesk version: 12.0.18 Update #9 , and after the upgrade the Postfix stop working. And forwarding, receiving is not working at all and I am getting message bellow.
after reinstalling the mta / postfix / smtp (because I couldn't send mails) my plesk is crashed.
I wanted to log in as admin but it doesn't accept my PW. Now with root and then it wants me to accept the license.
Now I copy all my /var/www/vhosts/ maybe when I do the setup steps in plesk it will overwrite all my website content... I hope not all plesk settings are away.
Why I pay every month money for a license? The trouble and work I have with Plesk..
My server is Plesk 12 with Postfix and Courier IMAP i am also using Thunderbird as mail client...
My question is when i create a folder from my mail client or webmail they just appear as sub folders of my inbox which is not what i want, i want root level folders not to be under inbox... When i searched for this i found [URL] ....
Is this still the case? Is there anything i can do to have root level folders?
I have a hard problem with my VPS. I have postfix as mail server on plesk 12 under ubuntu 12.
I dont know why the outgoing mails of all my domains in my servers are getting spam in servers like gmail, yahoo, hotmail...
I'm using mxtoolbox to fix errors and warnings and finally fixed all of them, but my mails are still outgoing to spam.
In mxtoolbox actually I have no mail server errors / warning, u can see it with, for example, this one of my domains: [URL] ....
Headers:
This message is an automatic response from Port25's authentication verifier service at verifier.port25.com. The service allows email senders to perform a simple check of various sender authentication mechanisms. It is provided free of charge, in the hope that it is useful to the email community.
I have a brandnew server with CENTOS 6.5 Final with Plesk 12.
For some reason unknown i'm not able to configure Postfix as smtp server and accept plain text autentication. It only accept TLS autentication both on port 25 or 587. If i install Qmail everything works without any problem.
