My problem is, when I attempt to access a seperate webspace's control panel login through webspace2.com:8443 it automatically redirects me to https://hostname.com:8443.
If however I go to https://webspace2.com:8443 this redirect does not happen and I can log straight in through this domain.
Ideally I need to keep these domains separate and need to remove this non-https redirect that is currently happening.
When I hit my server's domain it redirects me to one of the hosted sites' domain with a 302 redirect. It used to return the default plesk server page. How can I cancel the redirect?
View 2 Replies View RelatedWhen I create a CNAME record for domain, and then trying to load it, it goes to default website. It was working fine before, all old CNAME records are working fine.
Tried reconfigure-all but it doesn't fix the problem. I'm using 11.5.30 Update #44
I would like my clients only to be able to access Plesk Panels from a certain domain, instead all from or with all the domains hosted on our server, is there a way to accomplish that?
View 1 Replies View RelatedI run a virtual server (Ubuntu 12.04, Plesk 12, Postfix 2.9.6) using plesk to manage multiple domains. The server address is server.domain1.com. I use plesk to also manage domain1.com regarding all services, including DNS and mail.
What I just found is that postfix sometimes issues the following warning:
server postfix/trivial-rewrite[7397]: warning: do not list domain server.domain1.com in BOTH mydestination and virtual_alias_domains
The essential part of my main.cf is:
myhostname = server.domain1.com
mydestination = localhost.$mydomain, localhost.localdomain, localhost
virtual_mailbox_domains = $virtual_mailbox_maps, hash:/var/spool/postfix/plesk/virtual_domains
virtual_alias_maps = $virtual_maps, hash:/var/spool/postfix/plesk/virtual
virtual_mailbox_maps = , hash:/var/spool/postfix/plesk/vmailbox
virtual_transport = plesk_virtual
And /var/spool/postfix/plesk/virtual_domains contains amongst others:
domain1.com domain1.com/
I do not have any issues with receiving or sending e-mails right now, but would like to get rid of the error message however.
Could it be the problem that postfix automatically sets mydomain to $myhostname with skipping the first part (i.e., mydomain is implicitly set to domain1.com)? Should I manually set mydomain to server.domain1.com instead? Any other recommendations? Since mydomain seems to be used in multiple options [URL] ..., I wonder what I might destroy with changing this? As all mail services run without any further troubles at the moment, I don't want to break this...
As I assume that quite some people use a plesk-based server to manage the domain to which the server itself belongs to, I would assume that there should be a general fix/check to updated mydomain accordingly?
Any user that logs in, even with the format domainusername, get's the following error message: 530 User cannot log in.I have already tried the following:
net stop MSFTPSvc
net start MSFTPSvc
I currently migrate from cpanel to plesk12. Everything is working fine, but the emails are no been received, I´m able to send, but not able to receive.
The error is this one:
Apr 29 16:40:14 server postfix/smtpd[26799]: connect from mail-oi0-f42.google.com[209.85.218.42]
Apr 29 16:40:24 server postfix/smtpd[26799]: warning: 42.218.85.209.combined.njabl.org: RBL lookup error: Host or domain name not found. Name service error for name=42.218.85.209.combined.njabl.org type=A: Host not found, try again
Apr 29 16:40:28 server courier-imapd: Connection, ip=[::ffff:52.11.197.15]
[Code] ....
I thinks it´s permission on the folder, but already run the code : /usr/local/psa/admin/sbin/mchk --with-spam
It did not solved, is there anything else I can do?
I've been fiddling with Plesk to get HTTPS to work for [URL] .... Unfortunately I haven't had any successes at forcing HTTPS, all result in a 'to many redirects' message.
The certificate is already activated and can be verified trough; [URL] ....
Code:
proxy_error_log:2015/05/16 16:35:00 [crit] 21266#0: *2336 SSL_do_handshake() failed (SSL: error:140A1175:SSL routines:SSL_BYTES_TO_CIPHER_LIST:inappropriate fallback) while SSL handshaking, client: 64.41.200.106, server: 151.80.117.38:443
proxy_error_log:2015/05/16 16:36:37 [crit] 21266#0: *2616 SSL_do_handshake() failed (SSL: error:14094085:SSL
[Code] .....
I enter one of my IPs or the hostname belonging to this IP, followed by the Plesk port, and I get redirected to the "main" hostname of the server, which was set in Plesk. But at this moment that hostname is used by another server (my old server) and so I'm redirected to the other server and cannot access Plesk on the new server.
I don't know why Plesk reacts like this, because it did not on the old server. Here the problem more detailed:
I'm just configuring my new server with Plesk 11. My old server uses Plesk 10. On my old server / in Plesk 10 I have the following scenario:
- I have several IPs (10)
- Each IP is used for a different domain
- Each IP has it's domain as the reverse entry (configured outside of the server/Plesk)
- Each IP is set to "Dedicated" in Plesk
- I set Plesk to listen only on one of these IPs (and different port)
- Several domains are created in Plesk, but not a domain for my Plesk IP
- The server's name is one of the domains (required for mails not being recognized as spam)
- The hostname of the Plesk IP is one assigned by my provider (something like x-x-x-x.xyzservers.com)
- Entering the IP of Plesk redirects to the "Plesk hostname"
=> Plesk can be accessed by using x-x-x-x.xyzservers.com:myport
And under Plesk 11 (here comes the problem):
- Still several IPs (but less: 4)
- One IP should be used for Plesk, one for domain X, one for domain Y and the last one for the other domains
- Reverse entries are x-x-x-x.xyzservers.com for Plesk IP, domain X/Y for two other IPs and the main domain for the last IP
- Plesk IP and the two single domain IPs are configured as dedicated, the last one as shared
- At this point I did not configure any domains in Plesk
- Server's name is the same as my old server (the main domain)
=> Entering any IP with the Plesk port redirects to the servers hostname, e.g. my main domain, which is still on the old server.
=> Result: I cannot access Plesk!
Of course I could just change the hostname of the server via SSH (just have to find out how to do this), but why does Plesk react in another way now? Or is the problem that I cannot change Plesk to listen on only one IP?
I disabled a site, and instead of getting the default placeholder when visiting the domain, I get another web site that I host.
[URL]
I just went with Steadcom's VPS and they are great. I am setting things up and it's going pretty well, I have to dust off my linux/server knowledge that I haven't used in a couple of years.
Anyway I'm creating a virtual host.. I will have about 10 in the end, but right now I only have one domain IP Pointing to my new server. My registrar is NamesDirect.
When I create the virtual host, I can no longer access subdirectories directly. My Virtual Host directory is, say, /var/www/html/newdir
If I try to reach http://www.domainname.com which has been configued as a virtual host, that comes up correctly from the directory /var/www/html/newdir and works fine.
But if I try to reach http://myipaddress/newdir I get a 404 page not found error. Looking at the log, it's trying to reach /var/www/html/newdir/newdir so it's putting in the virtual host redirect even for just hitting the subdirectory directly.
Is this normal? Do I have something configured wrong? I have another domain that I have changed to IP Point to the VPS but until it propogates I won't be able to test having 2 virtual hosts.
Also.. I have not set up DNS on my VPS. I don't really understand it, and IP Pointing has always worked for me when I ran my own server form my home so I was just going to do that. But I wonder if this could be one of the problems.
I have a WAMP server that hosts a few sites, but I have a particular site with about 5 domains. I want them all to point to the correct website folder and all to be redirected to a single domain for SEO purposes. Here is what it looks like in the virtual hosts file:
<VirtualHost 50.62.82.101>ServerAdmin info@hovaness.comDocumentRoot "c:/wamp/www/example"ServerName example.comServerAlias example.net www.example.com www.examples.net www.examples.com examples.com examples.netErrorLog "logs/example.com.log"
Is there any way that Summary Report can show me the list of all domains with domain templates? Or any other way (not Summary Report)?
I need a list of all domains with information about hosting packages (domain templates)...
Over the weekend, I upgraded from Plesk 10.3 to Plesk 11.5, using the updater in the control panel. Everything seemed to go well. However, this morning I've noticed that some, not all, email accounts are having trouble logging into the server to send and receive mail. Other accounts are working fine.Via POP, I get this error: -ERR Temporary problem, please try again later
Via SMTP, I get this error:
535 auth failure
I see this in the maillog:
Jun 17 07:15:05 [server] courier-pop3d: LOGIN FAILED, user=[username], ip=[::ffff:xxx.xxx.xxx.xxx]
Jun 17 07:15:05 [server] courier-pop3d: authentication error: Input/output error
And this... Jun 17 07:24:50 [server] smtp_auth: FAILED: [email address] - password incorrect from [host] [xxx.xxx.xxx.xxx]
I replaced the server name, username, host, and IP in the above.
Here are the steps I've tried so far.
- Changing the password using the control panel.
- Updating the number of daemons in authdaemonrc
- Restarting the services
I just upgraded my Plesk on Ubuntu (vServer) yesterday. But after the upgrade I couldn't login to the Panel anymore because all I get when I try to reach the panel (https://panel.examplesite.com:8443) is a white screen.
I rebooted the server and restarted the panel as well as Apache several times with no change.
I cannot login to Plesk server with admin credentials as it says Error: Access for administrator from address 'xx.xx.xx.xx' is restricted in accordance with IP Access restriction policy currently applied. Also I cannot SSH to server and it says connection refused.
View 2 Replies View RelatedI have VPS Server with Parallels Plesk 11.5.30 (64 bits) on OVH.ORG..Today i do Update to newest version via https://MY-IP:8447
Code: [URL] .....
Now i cant login to my server: [URL] ....
How can i repair it. I dont wanna install again Plesk Panel becouse i have a lot of configuration and email adress.All components like Apache Mysql, ftp works good, but i cant only login.
I cannot login server:8447
1. netstat -anp |grep 8447 = nothing
2. iptables -L Chain INPUT (policy ACCEPT) - empty; Chain FORWARD (policy ACCEPT) - empty; Chain OUTPUT (policy ACCEPT) - empty
This happened after the unsuccessful upgrade.
Code:
Execution failed.
Command: autoinstaller
Arguments: Array
(
[0] => --select-product-id
[1] => plesk
[2] => --select-release-current
[3] => --upgrade-installed-components
[4] => --include-components-from-class
[5] => vendor=parallels
[6] => --include-components-from-class
[7] => patched
[code]....
ERROR: Failed to download the package URL...transfer closed with 205 bytes remaining to read..Not all packages were installed.Please try installing packages again later.try installing the packages again.
It seems like I have got a lot of trouble with Plesk 12 on a CentOS 7 machine.
1. I could not install Plesk properly due to some drweb problem.
2. Than the smb configuration seems only to be implemented partly.
3. Suddenly FTP login is not possible anymore (503 Access denied)
And now even Apache is not running anymore!
Code:
Unable to generate the web server configuration file on the host <xxxxxxx.dyndns.org> because of the following errors:
Template_Exception: [Mon Jun 08 14:16:28.058302 2015] [so:warn] [pid 4230] AH01574: module actions_module is already loaded, skipping
[Mon Jun 08 14:16:28.063364 2015] [so:warn] [pid 4230] AH01574: module headers_module is already loaded, skipping
[Mon Jun 08 14:16:28.063957 2015] [so:warn] [pid 4230] AH01574: module logio_module is already loaded, skipping
[Mon Jun 08 14:16:28.066150 2015] [so:warn] [pid 4230] AH01574: module suexec_module is already loaded, skipping
httpd: Syntax error on line 357 of /etc/httpd/conf/httpd.conf: Syntax error on line 5 of /etc/httpd/conf.d
[code]....
I am moving several (small) corporate websites over from an iPower VPS (terrible host btw) to LiquidWeb, which means I'm learning all the nuances in the new CP (WHM, cPanel). Now one company has three domain names (with employee only sections), all pointing to the same website (alias/parked domains). In Plesk, if I set them up as Alias domains, going to domain.com or domain.net pointed to the same website, but maintained the domain URL in the address bar indefinitely. Now on the new host, I have them set up as parked domains in cPanel (I thought this was the equivilant to alias). If a user goes to domain.net and follows a link on the page, they are taking to domain.net/link, as it should be.
However when an employee attempts to login at domain.net/login, the form action points to the login script, which in turn uses a PHP Header redirect to take them to the home page (or whichever page they attempted to access when not logged in). But when the header redirects them, it redirects to the domain.com logged in home page, and as the domain has changed it fails the session validation script, so they get redirected to domain.com/login, saying they are not logged in.
I put a note on the login page explaining you may have to login twice for now, but as you know some people just can't understand the interwebz, so I'm still getting lots of emails and phone calls about people not being able to login. Anyway, long story short, where should I start about fixing this problem? I haven't a clue about how WHM/cPanel manages parked domains and how it configures them, so I'm lost about where I should start looking.
I'm running plesk 11.0.9 on Centos 6. I can't login anymore, the administration login page is just a blank page. The error in the log file is:
(mod_fastcgi.c.2746) FastCGI-stderr: PHP Fatal error: Call to a member function getContext() on a non-object in /usr/local/psa/admin/plib/Navigation.php on line 54
When I try to login via webmail horde I get always:
Login failed because your username or password was entered incorrectly.
The logfile shows:
Jul 13 12:23:32 HORDE [error] [imp] FAILED LOGIN for mail@domain.tld [1.2.3.4] to to {127.0.0.1:143 [imap/notls]} [pid 5358 on line 139 of "/usr/share/psa-horde/imp/lib/Auth/imp.php"]Click to expand...
ERROR: Zend_Db_Adapter_Exception: SQLSTATE[HY000] [1049] Unknown database 'psa' (Abstract.php:144)
View 3 Replies View RelatedI just finished installing Plesk Panel 12. I seems like that everything is working as it should, except for FTP. I am not able to login with any FTP accounts.
View 13 Replies View RelatedVersion: Parallels Plesk v12.0.18_build1200140610.21 os_Ubuntu 14.04
After a few minutes or after specific actions Plesk shows the login screen without obvious reason. For example when I am trying to modify a file online and try to save it for the second time it always shows the login screen.
Also, when I enter the credentials I can see that the previous session(s) remain open. I have configured the session idle time to 1000 minutes, although I do not remain idle for 300 min anyway.
After a fresh install on a Debian Wheezy system, I get the following error(s) when trying to access the control panel.
https://sub.example.com:8443/
404 Not Found
Nginx
My log
Code:
2014/06/09 19:04:15 [warn] 32236#0: conflicting server name "" on 0.0.0.0:8443, ignored
2014/06/09 19:04:26 [error] 22597#0: *43 "/usr/share/html/index.html" is not found (2: No such file or directory), client: 68.51.77.126, server: , request: "GET / HTTP/1.1", host: "sub.example.com:8443"
While http://sub.example.com:8880/ works fine
When a login to my plesk, i look this error:
ERROR: Zend_Db_Adapter_Exception: SQLSTATE[08004] [1040] Too many connections (Abstract.php:144)
ERROR: Zend_Db_Adapter_Exception: SQLSTATE[HY000] [2002] No such file or directory (Abstract.php:144)
ERROR: Zend_Db_Adapter_Exception: SQLSTATE[HY000] [2002] Connection refused (Abstract.php:144)
There are a lot of permanent redirects in one of my customer's server. I tried to remove them through clicking the remove button but although it gave a "deleted" message, it failed to do so..
Are you sure you wish to permanently remove the redirect ** All Requests ** on ** All Public Domains **
I click YES and i got the message below.
The redirect ** All Requests ** on ** All Public Domains ** has been removed.
But redirect define is still there.
What should i do? I can access to server via SSH. So may be i can handle with this just editing some file(s)?