Plesk 12.x / Linux :: How To Change Nginx Port

Feb 3, 2015

I need changing the nginx port. I've followed various threads and have created a custom nginxDomainVirtualHost.php file at: /usr/local/psa/admin/conf/templates/custom/domain, while the website indeed moves to the port I have set, a second nginx thread starts at port 80 and takes over in it's place.

I need to put varnish at port 80 and cannot do so until all services relinquish control on port 80.

Followed clues here: [URL] ....

some here: [URL] .....

Turn's out to be able to change the nginx port to a non-standard port you need to edit 6 files

nginx.php
nginxDomainForwarding.php
nginxDomainForwardingIpDefault.php
nginxDomainVhost.php
nginxDomainVhostIpDefault.php
nginxWebmail.php

For the time being i disabled SSL support for my test domain as I didn't need it. The line you need to look for the in above files is:

Code:

$VAR->server->nginx->httpPort

So the line would finally become from this:

Code:

<?php echo $VAR->includeTemplate('server/nginxVhosts.php', array(
'ssl' => false,
'frontendPort' => $VAR->server->nginx->httpPort,
'backendPort' => $VAR->server->webserver->httpPort,
)) ?>

to this:

Code:

<?php echo $VAR->includeTemplate('server/nginxVhosts.php', array(
'ssl' => false,
'frontendPort' => "8888",
'backendPort' => $VAR->server->webserver->httpPort,
)) ?>

To get this to work you'll need to create a custom directory at: /usr/local/psa/admin/conf/templates

And copy the files over from the root of /usr/local/psa/admin/conf/templates/default

View 1 Replies


ADVERTISEMENT

Plesk 12.x / Linux :: Port 443 Not Responding / Nginx Failed On Startup

Jun 30, 2015

I have made a fresh plesk 12 install on a cent os 7. all is working fine except the SSL 443 port. on startup the following error message is thrown:

Code:
nginx.service - Startup script for nginx service
Loaded: loaded (/usr/lib/systemd/system/nginx.service; enabled)
Active: failed (Result: exit-code) since Tue 2015-06-30 17:55:37 CEST; 6min ago
Process: 800 ExecStartPre=/usr/sbin/nginx -q -t (code=exited, status=1/FAILURE)
Process: 797 ExecStartPre=/usr/bin/test $NGINX_ENABLED = yes (code=exited, status=0/SUCCESS)
Process: 788 ExecStartPre=/bin/echo Starting nginx service (code=exited, status=0/SUCCESS)

[code]....

View 2 Replies View Related

Plesk 12.x / Linux :: Stop Nginx From Listening On Specific IP Port 80 / 443

Dec 10, 2014

How can I remove a few "server { }" blocks from the file "/etc/nginx/plesk.conf.d/server.conf" without them being readded by plesk?

I want to stop nginx from listening on port 80/443 for a specific IP which is listed there.

Very much like described here: [URL] ....

But with nginx running in front of apache...

My setup looks like this:
* Plesk 12 + Ubuntu 14.04
* IP-Pair1 (IPv4_1 + IPv6_1)
* IP-Pair2 (IPv4_2 + IPv6_2)

IP-Pair1 is supposed to host admin and customer access.
= Plesk-admin-interface (lighhttpd?) on 80/443 instead of 8443 (ssh on 22, ftp ...)

IP-Pair2 is supposed to host visitor access.
= Plesk webspaces (nginx/apache) on 80/443

So I want to stop nginx from grabbing ports 80/443 of IP-Pair1 and listen to IP-Pair2 addresses only. Then I want to set plesk-admin interface to listen to 80/443 on IP-Pair1 only.

View 2 Replies View Related

Plesk 12.x / Linux :: How To Change Ports Of Nginx

Jul 9, 2014

how to change ports of Nginx from 80 to 8080 I would like install Varnish

View 2 Replies View Related

Plesk 12.x / Linux :: Nginx - 502 Bad Gateway With Every Domain Change

Mar 12, 2015

Since we switched to Plesk 12 and activated nginx the problem reoccurs reliably on every domain change.
As soon as a customer creates a new domain or alias and Apache restarts nginx delivers 502 errors for maybe 10 seconds. After that everything is fine again.

The system is Debian 6.0.10 with Plesk 12.0.18 Update #38

That might not be a problem in small environments, but with >100 domains the timeout is annoying enough for customers to pick up the phone.

Adding this to /etc/sw-cp-server/config did not do the trick.

http {
fastcgi_buffers 32 32k;
fastcgi_buffer_size 64k;
fastcgi_read_timeout 600;
fastcgi_send_timeout 600;
}

View 3 Replies View Related

Plesk 12.x / Linux :: Change Port Access To Subdomain?

Feb 11, 2015

I have to change what file and how to modify it to allow only one subdomain to have access through port 8015 and not using port 80?

View 7 Replies View Related

Plesk 12.x / Linux :: Change Control Panel Url Port (8443 To 9859)?

Apr 9, 2015

How change control panel url port (8443 to 9859)?

View 15 Replies View Related

Plesk 11.x / Windows :: Change Panel Default Port 8443

Jan 23, 2014

I have a Windows VPS with Plesk panel. Windows Server 2008 R2 with plesk panel version 11.5.30.

I tried to change the default plesk panel port (8443) to eg (1234) without any success.

The steps i followed are the following:
1) Firewall -> Inbound rule -> allow for port 1234
2) Firewall, Disable inbound rule for port 8443
3) IIS, PleskControlPanel, Bindings: changed binding from 8443 to 1234.

Now i type on browser: [URL] .... and while its loading after some seconds redirects me to [URL] ...

View 6 Replies View Related

Email Server Port- How To Change/add Port For SMTP

Feb 19, 2008

Currently I am using Linux + cPAnel and using the port 25 for email sevrer. Currently we facing 1 problem is, some user's ISP is not support port. May I know how can I add additional port into server and allow users to send mail by different port?

View 1 Replies View Related

Plesk 12.x / Linux :: Change Plan Via WHMCS Causes Dedicated IP To Change To Shared

Feb 21, 2015

I have a client on a dedicated IP, today we needed to downgrade the web hosting plan. As the web hosting plan puts users on a default shared IP, this plan change also changed the dedicated IP to the shared one causing some propagation issues for a small period of time.

I have contacted WHMCS about this asking if they had a way of changing the clients plan but keeping the IP address intact as this could lead to some very undesirable outcomes. They explained that it is not their fault and to contact Parallels.

I know I can change the plan directly in Plesk however by initiating the plan change via WHMCS, everything is automated.

View 1 Replies View Related

Plesk 12.x / Linux :: 502 Bad Gateway Using Nginx

Oct 30, 2014

Today at 12.50 pm my (ubuntu 14.04.1 LTS) server running plesk 12.0.18 suddenly stopped serving websites. Any attempts to access a webpage on any vhost returned the 502 bad gateway using Nginx error messsage.When I looked at the nginx logs, I found messages like:

2014/10/30 14:48:00 [error] 3099#0: *101 connect() failed (111:

Connection refused) while connecting to upstream, client: m.m.m.m, server: , request: "GET /server-status HTTP/1.0", upstream: URL....

Restarting apache & nginx (/etc/init.d/apache2 restart & /etc/init.d/nginx restart) made no difference and I had to reboot to restore http access.

Strangely if I browsed with port 7080 specified (i.e. http://n.n.n.n:7080), this worked fine for all vhosts, so apache (which I believe is listening on this port while nginx listens on port 80) is working fine - nginx is just not able to pass stuff to it?

View 15 Replies View Related

Plesk 11.x / Linux :: How To Update Nginx

May 12, 2014

My current version of nginx in plesk 11.5.44 is 1.5.0 and i would like to update it to the latest stable version which is 1.6.0. However, i cannot seem to manage to do so. I tried with yum update nginx but i receive Package(s) nginx available, but not installed.

View 1 Replies View Related

Plesk 12.x / Linux :: Php Is Not Working On Nginx

Dec 18, 2014

I running magento on plesk 12 and trying to configure nginx, but only home page is working and all other pages are not working with error 404.

View 6 Replies View Related

Plesk 12.x / Linux :: Bad Gateway Nginx

Jun 17, 2015

this is a fresh Plesk 12 installation on a Dedicated Server, on Debian 6. I haven't installed a License key yet.When i tried to run MIgration Manager, the loading was taking forever. Also, when i try to enter Webserver Configurations Troubleshooter, i get 502 Bad Gateway nginx error.In the /var/log/sw-cp-server/error_log i get this error:

Code:
2015/06/17 11:42:47 [error] 3918#0: *52 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: A.B.C.D, server: , request: "GET /modules/configurations-troubleshooter/index.php/index/list HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "X.X.X.X:8443", referrer: "https://X.X.X.X:8443/admin/module/list?context=modules"
When i try to insert a Plesk License, i also get this error:

Code:
2015/06/17 10:29:17 [error] 5643#0: *81 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: A.B.C.D., server: , request: "POST /server/
key_upload.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "X.X.X.X:8443", referrer: "https://X.X.X.X:8443/server/key_upload.php"

I followed this KB article 118757 but no luck. Also, the server resources are at the lowest usage and there is >2 TB disk space available.

View 2 Replies View Related

Plesk 11.x / Linux :: Updating Nginx To Use TLS 1.2?

Apr 30, 2015

My server admin already upgraded my OpenSSL to version 1.0.1m 19 Mar 2015 and he also upgraded Nginx to 1.6. I'm also running CentOS v5.11 and Plesk v11.5.

However, he tells me that he still can't get TLS 1.2 to work because he noticed that my server uses a different version of Nginx (sw-nginx), which he believes is part of Plesk. How we can get TLS 1.2 working on the Plesk copy of Nginx (sw-nginx)?

View 1 Replies View Related

Plesk 12.x / Linux :: 502 Bad Gateway Nginx

Jun 23, 2015

We have a problem with a magento website. Often (perhaps when we use administration), we have the message "502 Bad Gateway nginx".

We have added server instructions in Plesk Nginx:
proxy_buffers 16 16k;
proxy_buffer_size 32k;
fastcgi_buffer_size 32k;
fastcgi_buffers 16 12k;

But we have still the problem.

We have tried :
[URL] ....
And
[URL] ....

Without results...

The log file say:

[client x.x.x.x] client denied by server configuration: /var/www/vhosts/domain.com/httpdocs/app/etc/local.xml

x.x.x.x is the website IP.

View 4 Replies View Related

Plesk 12.x / Linux :: How To Remove And Purge Nginx

Jun 10, 2015

Plesk 12 will not do it and if you reinstall it you get errors after installation. Maybe a bug but seems nobody is interested in answering my question before.

I tried to remove by

apt-get remove --purge sw-nginx
dpkg -r sw-ningx

Both of them display that is removed but after a new installation are the folders not created and maybe old files not overwritten if not deleted.

View 1 Replies View Related

Plesk 12.x / Linux :: Error On Enabling Nginx

May 20, 2015

I wanted to activate nginx on my server als describes on [URL] ...

Installing was no problem, but when i try to enable nginx, I always get errors:

/usr/local/psa/admin/sbin/nginxmng -e
[2015-05-20 10:42:36] ERR [util_exec] proc_close() failed
Error occured while sending feedback. HTTP code returned: 502
[2015-05-20 10:42:37] ERR [util_exec] proc_close() failed

[Code] ....

View 7 Replies View Related

Plesk 12.x / Linux :: How To Set Nginx To Show Real IP

Mar 23, 2015

Is here a tutorial special for plesk 12 that show me how set nginx to show real visitor ip in access_log and php?

Actual nginx show for IPv6 visitors the own server IPv6 in access_log and php.

View 5 Replies View Related

Plesk 12.x / Linux :: ERROR IP Nginx After UPDATE

Mar 18, 2015

how is it possible that after an update my main site is down? This site: www.orderhosting.it has plesk Panel and I have 20 sites. They work perfectly but my main site is off. I think there is an error in the configuration because:

[root@orderhosting ~]# grep -r 199.99.36.73 /etc/nginx/
[root@orderhosting ~]#

This is strange.Error log does not report any errors, only this: [warn] RSA server certificate CommonName (CN) `Parallels Panel' does NOT match server name!?

View 7 Replies View Related

Plesk 12.x / Linux :: Bad Gateway Nginx After Upgrade

Aug 18, 2014

I have upgraded from 10 to 12 and now I have "502 Bad Gateway nginx" error. I have atached logas..

View 1 Replies View Related

Plesk 12.x / Linux :: Wordpress 404 Not Found Nginx

Dec 19, 2014

i went to server setting and checked manage php with nginx then start getting 404 Not Found nginx. It was clear that it s a problem with the wordpress permanent links so i went in wordpress back-end and switched to default links then it start working but when i switched to permanent link againi got the previous error again

I searched for a while on internet and i found . URL.... So the problem that i have is that i added this piece of code manually in : /var/www/vhosts/system/domaine.com/conf/nginx.conf....Since it s mentioned above

#ATTENTION!
#
#DO NOT MODIFY THIS FILE BECAUSE IT WAS GENERATED AUTOMATICALLY,
#SO ALL YOUR CHANGES WILL BE LOST THE NEXT TIME THE FILE IS GENERATED.

View 14 Replies View Related

Plesk 12.x / Linux :: 502 Bad Gateway Error When Use NGINX

Jan 14, 2015

I have a server with the latest version of plesk and centos.

The main site is Articoli Promozionali

Until now kept on the server active both apache and nginx.

Tonight I tried to disable apache leaving only nginx.

That raises the error: 502 bad gateway NGINX at all sites on that server.

To use nginx i need to keep active apache?

What can cause that error?

View 1 Replies View Related

Plesk 12.x / Linux :: Additional Nginx Directives

Sep 3, 2014

I am trying to add the following nginx configuration to Plesk through

Website & Domains -> Web Server Settings

The conf i am adding is:

location /folder/folder/ { try_files $uri /folder1/folder2/file.php; }
or
location ^~ /folder/folder/ { try_files $uri /folder1/folder2/file.php; }

but it doesn't seem to be working.

gives 404

View 1 Replies View Related

Plesk 12.x / Linux :: How To Enable Nginx For All Domains

Nov 18, 2014

I have installed the nginx on my server and want to activate it for all my domains, to do this, i have to do it manually for each domains. But there should be an easier way. Apache uses too much ram.

View 7 Replies View Related

Plesk 12.x / Linux :: Nginx Wildcard Subdomain

Jul 3, 2014

I have a problem with Nginx on myPlesk 12 with wildcard dns.I want subdomains URl to be like root domain url. Exemple. URL...You can see a live exemple here: URL.... give error 404 instead of showing root domain file (URL....). It's the same for images.What specific rule I must add in plesk panel?

View 5 Replies View Related

Plesk 12.x / Linux :: No Access To AWStats Using Nginx

Oct 8, 2014

Using Plesk 12 on a VPS with Ubuntu 12.04 LTS. In the Web Server Settings, if I select "Process PHP by nginx", then the URL "<domain>/plesk-stat/webstat/" is answered by Nginx with "404 Not Found". Having sniffed around, it seems:

/var/www/vhosts/system/VHOST/statistics/webstat is getting statistics gathered.I can't say if they are complete, or even sensible, but things are happening there.The various Alias and other statements required for access to AWStats via Apache are contained in the Apache config file /var/www /vhosts/system/VHOST/conf/last_httpd.conf..But no equivalent statements are generated in /var/www/vhosts/system/VHOST/conf/last_nginx.conf.

View 2 Replies View Related

Plesk 12.x / Linux :: Nginx / No Data Received

Mar 21, 2015

i have installed today Reverse Proxy Nginx on Plesk 12. After have activing Nginx, website show "no data received".

Nginx error.log:

PHP: no "ssl_certificate" is defined in server listening on SSL port while SSL handshaking-----conflicting server name

View 6 Replies View Related

Plesk 11.x / Linux :: Nginx IP When Server Reboot

May 6, 2014

When I reboot my centOS 6.5 + Plesk 11.5 server, Nginx doesn't start and every time I need to go to Server > IP Addresses and click Reread IP.Then Plesk says that need to repair one of these ips, I click repair and then Nginx can start. ( I have 3 ips [2 ipv4 and 1 ipv6] )

View 3 Replies View Related

Plesk 12.x / Linux :: How To Switch To NGINX Only As Web Server

Oct 26, 2014

As the title says: How do I switch to NGINX only as my web server, while disabling/removing apache in Plesk?

View 2 Replies View Related

Plesk 12.x / Linux :: Nginx Not Starting Automatically

Sep 25, 2014

i've set up a new Debian 7 server with Plesk 12. After the basic configuration, i've installed nginx via Plesk updater.Now, when restarting the whole server, nginx doesnt start for some reason. Plesk shows it as running, but `service nginx status` shows, that it isnt running. But an `nginx.pid` exists in /var/run, but it's empty.

However, starting it manually via `service nginx start` works fine without any error.I've already tried `update-rc.d nginx remove && update-rc.d nginx defaults` but without any success. I've also tried another init script, but same results.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved