I recently needed to make some changes to the domain.conf file at the following path: /etc/nginx/plesk.conf.d/vhosts. When I try to edit the file it just has 3 lines at the top warning me that the changes made here would not persist, while other domain confs have full configs inside.
I am positive that the domain in question is set to use nginx, double checked this, so what gives? Why is the file blank?
I have a Plesk 12.0.18 (Update #22) running on CentOS 6.6 (Final) and I have a very irritating issue with nginx.
Anytime a customer creates a domain and/or subdomain everything is registered and going wel except that nginx is not restarted/reloaded to reflect the changes and I have to restart nginx manually.
I cannot find anything that causes this, no obvious errors in the logs and or errors in the UI.
Since we switched to Plesk 12 and activated nginx the problem reoccurs reliably on every domain change.
As soon as a customer creates a new domain or alias and Apache restarts nginx delivers 502 errors for maybe 10 seconds. After that everything is fine again.
The system is Debian 6.0.10 with Plesk 12.0.18 Update #38
That might not be a problem in small environments, but with >100 domains the timeout is annoying enough for customers to pick up the phone.
Adding this to /etc/sw-cp-server/config did not do the trick.
http {
fastcgi_buffers 32 32k;
fastcgi_buffer_size 64k;
fastcgi_read_timeout 600;
fastcgi_send_timeout 600;
}
Is it possible to control if nginx is active on a per domain basis? If so, how do we configure this. If not, how do we disable nginx completely?
View 3 Replies View RelatedOur server : [URL] .....
plesk v11 (64BITS)
PROBLEM DESCRIPTION
We found 502 Bad Gateway error Nginx on multiple domain "currently troissoeursetunfrere.com is a wordpress site e-commerce" and also malittleboutique.com ecommerce wordpress, possibly to fix this problem we have followed this tutorial " [URL] ....
we perform the following operations:
sudo apt-get remove php5 php5-cgi php5-fpm
sudo apt-get install php5 php5-cgi php5-fpm
Following these operations we lost access to cpanel.
I have nginx conf which works perfectly fine with ip adress,but when i put domain then php for some reason no longer works,i getting download php file situation.
Here is main conf file:
#######################################################################
#
# This is the main Nginx configuration file.
#
# More information about the configuration options is available on
# * the English wiki - http://wiki.codemongers.com/Main
# * the Russian documentation - http://sysoev.ru/nginx/
#
#######################################################################
#----------------------------------------------------------------------
# Main Module - directives that cover basic functionality
#
# http://wiki.codemongers.com/NginxMainModule
#
#----------------------------------------------------------------------
user nginx;
worker_processes 5;
error_log /var/log/nginx/nginx-error.log crit;
#error_log /var/log/nginx/error.log notice;
#error_log /var/log/nginx/error.log info;
pid /var/run/nginx.pid;
#----------------------------------------------------------------------
# Events Module
#
# http://wiki.codemongers.com/NginxEventsModule
#
#----------------------------------------------------------------------
events {
worker_connections 2048;
}
#----------------------------------------------------------------------
# HTTP Core Module
#
# http://wiki.codemongers.com/NginxHttpCoreModule
#
#----------------------------------------------------------------------
http {
include /etc/nginx/mime.types;
default_type application/octet-stream;
log_format main '$remote_addr - $remote_user [$time_local] $request '
'"$status" $body_bytes_sent "$http_referer" '
'"$http_user_agent" "$http_x_forwarded_for"';
access_log off;
sendfile on;
#tcp_nopush on;
#keepalive_timeout 0;
keepalive_timeout 65;
#gzip on;
# Load config files from the /etc/nginx/conf.d directory
include /etc/nginx/conf.d/*.conf;
#
# The default server
#
server {
listen 81;
server_name main.main.net;
#charset koi8-r;
#access_log logs/host.access.log main;
location / {
root /usr/share/nginx/html;
index index.html index.htm;
}
error_page 404 /404.html;
location = /404.html {
root /usr/share/nginx/html;
}
# redirect server error pages to the static page /50x.html
#
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root /usr/share/nginx/html;
}
# proxy the PHP scripts to Apache listening on 127.0.0.1:80
#
#location ~ .php$ {
# proxy_pass http://127.0.0.1;
#}
# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
#
#location ~ .php$ {
# root html;
# fastcgi_pass 127.0.0.1:9000;
# fastcgi_index index.php;
# fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name;
# include fastcgi_params;
#}
# deny access to .htaccess files, if Apache's document root
# concurs with nginx's one
#
#location ~ /.ht {
# deny all;
#}
}
}
When I specify log rotation settings for domain xyz.com in Plesk panel I expect them to be saved in /etc/logrotate.d/xyz.com file, at least this is the expected behaviour according to Plesk12 Admin Guide: [URL] ....
Apparently, it doesn't happen and I don't have xyz.com file in /etc/logrotate.d/
Log rotation doesn't seem to work either, at least it doesn't work for error.log
I read somewhere that log rotation feature has to be specially enabled in Plesk but I couldn't find specifics anywhere.
For a particular domain I've got it set to:
Log rotation condition: By size (1024 KB)
Maximum number of log files: 5
Compress log files: Yes
...however the access_log.processed is at 20.4MB. Is this correct? I would have thought it could only get to 5MB in total?
How do I restrict the size of access_log.processed?
Can't get it working, I want to set up a cron job for a domain user, but seems that there's a problem to find the php executable. The command is:
Code:
/usr/bin/php/ -f /var/www/vhosts/thedomain.com/httpdocs/test.php
But the report says
-: /usr/bin/php/: No such file or directoryClick to expand...
After a fail in the update procedure I had problem with plesk panel. I have run the autoinstaller from command and after that the psa database removed for some reasons.
I have follow the steps from the plesk procedure and restore is from the backup.
Everything is working now except from the home tab when I login into plesk . I get the side bar with the menus links but in the right side I get a blank page. (the other menus works fine)...
I'm running plesk 11.0.9 on Centos 6. I can't login anymore, the administration login page is just a blank page. The error in the log file is:
(mod_fastcgi.c.2746) FastCGI-stderr: PHP Fatal error: Call to a member function getContext() on a non-object in /usr/local/psa/admin/plib/Navigation.php on line 54
I get a blank page after upgrading to the latest version using the automatic update.
View 1 Replies View Relatedyesterday I have installed CloudLinux on my Centos 6.6 server. Today only my site was not reach. I have contacted cloudlinux support but this problems does not depend from they. In my personal site I have also WHMCS. For this issue I try: [URL] Then: [URL] I changed size of buffering: [URL] And at the end this: [URL] After that I have the same problem only for one domain.
View 5 Replies View RelatedI'm build Plesk Panel for Linux and Presence Builder, I don't want my user can upload their website to hosting via File Manager. How can I do it...
View 2 Replies View RelatedToday at 12.50 pm my (ubuntu 14.04.1 LTS) server running plesk 12.0.18 suddenly stopped serving websites. Any attempts to access a webpage on any vhost returned the 502 bad gateway using Nginx error messsage.When I looked at the nginx logs, I found messages like:
2014/10/30 14:48:00 [error] 3099#0: *101 connect() failed (111:
Connection refused) while connecting to upstream, client: m.m.m.m, server: , request: "GET /server-status HTTP/1.0", upstream: URL....
Restarting apache & nginx (/etc/init.d/apache2 restart & /etc/init.d/nginx restart) made no difference and I had to reboot to restore http access.
Strangely if I browsed with port 7080 specified (i.e. http://n.n.n.n:7080), this worked fine for all vhosts, so apache (which I believe is listening on this port while nginx listens on port 80) is working fine - nginx is just not able to pass stuff to it?
My current version of nginx in plesk 11.5.44 is 1.5.0 and i would like to update it to the latest stable version which is 1.6.0. However, i cannot seem to manage to do so. I tried with yum update nginx but i receive Package(s) nginx available, but not installed.
View 1 Replies View RelatedI running magento on plesk 12 and trying to configure nginx, but only home page is working and all other pages are not working with error 404.
View 6 Replies View Relatedthis is a fresh Plesk 12 installation on a Dedicated Server, on Debian 6. I haven't installed a License key yet.When i tried to run MIgration Manager, the loading was taking forever. Also, when i try to enter Webserver Configurations Troubleshooter, i get 502 Bad Gateway nginx error.In the /var/log/sw-cp-server/error_log i get this error:
Code:
2015/06/17 11:42:47 [error] 3918#0: *52 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: A.B.C.D, server: , request: "GET /modules/configurations-troubleshooter/index.php/index/list HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "X.X.X.X:8443", referrer: "https://X.X.X.X:8443/admin/module/list?context=modules"
When i try to insert a Plesk License, i also get this error:
Code:
2015/06/17 10:29:17 [error] 5643#0: *81 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: A.B.C.D., server: , request: "POST /server/
key_upload.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "X.X.X.X:8443", referrer: "https://X.X.X.X:8443/server/key_upload.php"
I followed this KB article 118757 but no luck. Also, the server resources are at the lowest usage and there is >2 TB disk space available.
My server admin already upgraded my OpenSSL to version 1.0.1m 19 Mar 2015 and he also upgraded Nginx to 1.6. I'm also running CentOS v5.11 and Plesk v11.5.
However, he tells me that he still can't get TLS 1.2 to work because he noticed that my server uses a different version of Nginx (sw-nginx), which he believes is part of Plesk. How we can get TLS 1.2 working on the Plesk copy of Nginx (sw-nginx)?
We have a problem with a magento website. Often (perhaps when we use administration), we have the message "502 Bad Gateway nginx".
We have added server instructions in Plesk Nginx:
proxy_buffers 16 16k;
proxy_buffer_size 32k;
fastcgi_buffer_size 32k;
fastcgi_buffers 16 12k;
But we have still the problem.
We have tried :
[URL] ....
And
[URL] ....
Without results...
The log file say:
[client x.x.x.x] client denied by server configuration: /var/www/vhosts/domain.com/httpdocs/app/etc/local.xml
x.x.x.x is the website IP.
Plesk 12 will not do it and if you reinstall it you get errors after installation. Maybe a bug but seems nobody is interested in answering my question before.
I tried to remove by
apt-get remove --purge sw-nginx
dpkg -r sw-ningx
Both of them display that is removed but after a new installation are the folders not created and maybe old files not overwritten if not deleted.
I wanted to activate nginx on my server als describes on [URL] ...
Installing was no problem, but when i try to enable nginx, I always get errors:
/usr/local/psa/admin/sbin/nginxmng -e
[2015-05-20 10:42:36] ERR [util_exec] proc_close() failed
Error occured while sending feedback. HTTP code returned: 502
[2015-05-20 10:42:37] ERR [util_exec] proc_close() failed
[Code] ....
Is here a tutorial special for plesk 12 that show me how set nginx to show real visitor ip in access_log and php?
Actual nginx show for IPv6 visitors the own server IPv6 in access_log and php.
how is it possible that after an update my main site is down? This site: www.orderhosting.it has plesk Panel and I have 20 sites. They work perfectly but my main site is off. I think there is an error in the configuration because:
[root@orderhosting ~]# grep -r 199.99.36.73 /etc/nginx/
[root@orderhosting ~]#
This is strange.Error log does not report any errors, only this: [warn] RSA server certificate CommonName (CN) `Parallels Panel' does NOT match server name!?
how to change ports of Nginx from 80 to 8080 I would like install Varnish
View 2 Replies View RelatedI have upgraded from 10 to 12 and now I have "502 Bad Gateway nginx" error. I have atached logas..
View 1 Replies View Relatedi went to server setting and checked manage php with nginx then start getting 404 Not Found nginx. It was clear that it s a problem with the wordpress permanent links so i went in wordpress back-end and switched to default links then it start working but when i switched to permanent link againi got the previous error again
I searched for a while on internet and i found . URL.... So the problem that i have is that i added this piece of code manually in : /var/www/vhosts/system/domaine.com/conf/nginx.conf....Since it s mentioned above
#ATTENTION!
#
#DO NOT MODIFY THIS FILE BECAUSE IT WAS GENERATED AUTOMATICALLY,
#SO ALL YOUR CHANGES WILL BE LOST THE NEXT TIME THE FILE IS GENERATED.
I have a server with the latest version of plesk and centos.
The main site is Articoli Promozionali
Until now kept on the server active both apache and nginx.
Tonight I tried to disable apache leaving only nginx.
That raises the error: 502 bad gateway NGINX at all sites on that server.
To use nginx i need to keep active apache?
What can cause that error?
I am trying to add the following nginx configuration to Plesk through
Website & Domains -> Web Server Settings
The conf i am adding is:
location /folder/folder/ { try_files $uri /folder1/folder2/file.php; }
or
location ^~ /folder/folder/ { try_files $uri /folder1/folder2/file.php; }
but it doesn't seem to be working.
gives 404
I have installed the nginx on my server and want to activate it for all my domains, to do this, i have to do it manually for each domains. But there should be an easier way. Apache uses too much ram.
View 7 Replies View RelatedI have a problem with Nginx on myPlesk 12 with wildcard dns.I want subdomains URl to be like root domain url. Exemple. URL...You can see a live exemple here: URL.... give error 404 instead of showing root domain file (URL....). It's the same for images.What specific rule I must add in plesk panel?
View 5 Replies View Related
