After successful creation of a full backup, pmm-ras hangs forever (100% CPU) while trying to export the dump to FTP. I have two identical Plesk 12.0.18 installations and this happens only on one of them.
I see the following in /opt/psa/PMM/sessions/*/.stderr:
Use of uninitialized value in numeric eq (==) at /opt/psa/admin/bin/plesk_agent_manager line 827.
I am having issues with the plesk backup manager. I set up my personal FTP personal repository in tools & settings, then backup manager. My ftp is secure with a specific port. here are my options:
FTP server hostname or IP: myipaddress":"port without quotes. Directory for backup files storage: complete also used /complete. Both correct username and password
Use passive mode checked Use FTPS checked Use password protection checked
Here is my scenario:
Personal FTP repository backups are set up with:
Create a multivolume backup Volume size: 2047 Store backup in: Personal FTP Repository max number of backups: 1
For some reason when I manually backed up the server with server repository, my storage went from 14gb to 6gb.. I have zero backups in both server repository and personal FTP repository because I deleted them. Now its stuck at 6gb, which seems that the backup is stored somewhere in the system and is not deleted.Where can I find this backup? I am using CentOS.
Code: # plesk bin pleskbackup server UNIVERSAL->import is deprecated and will be removed in a future perl at (eval 13) line 3. UNIVERSAL->import is deprecated and will be removed in a future perl at /usr/local/psa/PMM/agents/shared/IPC/Run.pm line 1060. UNIVERSAL->import is deprecated and will be removed in a future perl at /usr/local/psa/PMM/agents/shared/IPC/Run/IO.pm line 78. UNIVERSAL->import is deprecated and will be removed in a future perl at /usr/local/psa/PMM/agents/shared/IPC/Run/Timer.pm line 161. Runtime error: Could not run make dump with pmmcli[Illegal seek]
Code: # /usr/local/psa/admin/sbin/pmmcli Traceback (most recent call last): File "/usr/local/psa/admin/sbin/pmmcli", line 5, in <module> import pmmcli File "/usr/local/psa/admin/share/pmmcli/pmmcli.py", line 21, in <module> import pmmcli_session File "/usr/local/psa/admin/share/pmmcli/pmmcli_session.py", line 15, in <module> import pmm_migration_handler File "/usr/local/psa/admin/share/pmmcli/pmm_migration_handler.py", line 16, in <module> import migration_handler ImportError: Bad magic number in /usr/local/psa/admin/share/migration-handler/migration_handler.pyc
After starting back up in plesk 11.5 I get this error after some time...
Runtime error: Export dump to FTP failed at /usr/local/psa/admin/bin/plesk_agent_manager line 727. at /usr/local/psa/admin/bin/plesk_agent_manager line 727 main::perform('verbose', 4, 'owner-type', 'server', 'split-size', undef, 'session-path', '/usr/local/psa/PMM/sessions/2014-06-27-025357.825', 'description', ...) called at /usr/local/psa/admin/bin/plesk_agent_manager line 1319
The backup was stored in Server Repository and was also uploaded to ftp....
Backup file size in server repository : 169 MB In personal repository showed in plesk :169 MB File size shown in FTP in backup server : 169.08MB
The Problem: I'm trying to set up an automatic backup to an ftp server using ftps (as configured in the personal ftp repository). Copying the files fails however.
The things I checked: The Plesk management website can't show the target folder's contents. The only error I get is Error-Code "1". The ftp server (a synology NAS) logs the ftp access: Credentials are correct, session is terminated after transferring 0 Bytes. Each failed backup leaves a 0-Byte .tar file on the Backup folder. If I disable ftps and go with plain ftp, everything works just fine.
Our previous generation Plesks (v11 and lower) can utilize ftps for backup (to the same ftp server) without a hitch.
Additional considerations: Since the WebServer is on a hosted machine and file transfer has to be done across the internet, unsecured transport is not an option.
"Transport error: unable to list directory: Curl error: Couldn't connect to server".
This happens when I enter ftp settings for the Personal FTP Repository. I'm sure the ftp server is fine. I have it already set on other domains. It connects backs-up just fine.
I've noticed two things when connecting to the FTP server it automatically issues PASV and does nothing else. It also connects using the secondary ip which I guessing it should. Micro Update 5 is installed.
Plesk Panel 12 uses a proftpd FTP server, with the TLS module pre-installed and configured.
Many questions and/or problems arise when trying to connect to the FTP server over a FTPS connection. In (almost) all cases, the disability to connect with FTPS is due to
a) the lack of configuration of passive ports, AND b) firewall settings, enabling connections through before mentioned passive ports.
The passive port range can be configured by
adding a line to /etc/proftpd.conf, stating: "PassivePorts <start> <end>", OR adding a separate file with name <filename>.conf to /etc/proftpd.d/, with the contents of <filename>.conf stating: "PassivePorts <start> <end>"
And note that
- <start> is the first port of the port range, in theory any value above 1050 can suffice, - <end> is the last port of the port range, any value below 65000 (!) can suffice, - the extension .conf is required when using a separate config file, - the directory location /etc/proftpd.d/ is required when using a separate config file, - one should always limit the port range, i.e. it is not desirable to open up a lot of ports, - it is desirable to have the <start> value above 20000, in order to prevent conflicts with other programs, using a specific port (for instance, port 8443 is also being used), - it is not necessary to restart proftpd after configuring the passive ports.
The firewall settings have to be changed to allow connections through the passive ports that have been opened for FTPS connections and note that
- only open up the port range (not more) in the firewall settings, - it is only necessary to open up ports in the firewall settings of the FTP server, - it is not required to open up ports in the firewall settings of the sending server. Many issues have been arising when setting up the FTP Backup Repository.
In general, the passive mode checkbox has to be selected, when encountering issues.
The explicit use of the passive mode allows for proper configuration of the FTP Backup Repository and note that it does not matter whether FTPS or normal FTP will be used.
I host a number of large sites (20GB+) on my VPS server running Centos6 and Plesk Panel 12. Due to the large sites I don't want to keep multiple backups on the actual server because it would take too much disk space. When I create a backup to the server's repository all is good, but when I click the green arrow to download the backup it takes a long time and then it fails with a timeout error. On some smaller sites it takes a while but eventually downloads the tar.
So my question: Is it possible to access the Server Repository via FTP? How and where would I set this up? Presumably it would be a better way to download these large archive files?
keep a local and remote backup of certain subscriptions or at least have a full server backup on FTP.
I have a livedrive.com reseller account which allows be to quite cheaply add 512GB of remote storage accessible through SFTP, FTP and WebDAV. I created this partition and added it as a server-level FTP repository in Plesk 12 (latest build). During testing I added a firewall exception for traffic on the FTP IP-address and figured that I had to put the FTP repository in passive mode to properly connect.
After setting this up I ran a configuration only backup to test if everything was working properly. The backup was created properly and can be accessed through the FTP as well: success!
My second test was running a full server backup through the manager. The ±40GB file was created properly (I could see my disk usage increase and decrease through new relic monitoring) and supposedly transferred to the FTP repository according to Plesk.
When I look at the FTP or the Plesk Backup Manager both indicate that the full server backup is 0kb in size.
After this issue I figured: I really don't care about a full server backup, I mostly care about a specific set of subscriptions that have new content on a daily basis and need to be backed up properly as well. Those subscriptions are already on a daily or weekly backup scheme that places backups on the local repository.
What I would eventually like to do is create daily or weekly backups on the local repository and create weekly or monthly backups on the FTP repository for those specific subscriptions, but unfortunately you cannot (by default) setup Plesk to automatically backup to local and remote based on different or even the same intervals.
And this is the more important question: How to be able to create/setup a backup automation that keeps local and remote backups for the same or different intervals? Either through the Plesk interface, a plugin or a script?
Running Plesk 12 on CentOS 6.6
Just tried running the same server wide backup, but this time as a multivolume backup. This resulted in the following error:
First of all I checked via command line if any software is not installed properly while plesk installation was done on destination server (windows server 2012 R2). All looks fine, please check attached file pleskinstallation.txt
Source plesk version 10.4.4 (windows server 2008) Destination plesk version 12.0.18 MU#23 built.
We are in testing mode of migrating websites hosted with source plesk version 10.4.4 onto destination server plesk server 12.0.18 having (windows server 2012 R2).
What we did, we restored the backup of Source plesk version 10.4.4 (windows server 2008) to Destination plesk version 12.0.18 MU#23 built.
Now the problem is that backup which we restored on Destination plesk version 12.0.18 MU#23 was of 68 GB and now when we setup the backup on Destination plesk version 12.0.18 MU#23 and when backup completes successfully it show us wrong backup size up to 16 GB.
We have requested several times to plesk support has to check the entire new plesk version in terms of all feature (like taking backup, restoring, plesk installation etc) while releasing new version, If they have noticed bug than plesk support should not release new version or micro update until they are sure.
I would request them again to check backup size bug along with other bugs.
1. "Stats crashing and not updating stats"
2. installing "Spam assassin" on Plesk 12.0.18 on windows server 2012 r2 and we are getting error:
Error: Unable to set Plesk SpamAssassin 3.3.2 as the default Spam Filter: defpackagemng failed: Execute spammng.exe --check failed with error code 1: Unable generate the unique file name by template D:Program Files (x86)ParallelsPleskAdditionalPerlsiteetcmailspamassassinlocal.cf[*].bak: directory D:Program Files (x86)ParallelsPleskAdditionalPerlsiteetcmailspamassassin does not exist.
under Plesk 12.0.18 PHPMyAdmin is failing to import a 3 MB SQL dump of a simple Joomla website. "Error 505 Bad Gateway", it says.It happens with other dumps too, some as small as ~500 KB. The format (SQL or ZIP) of the file uploaded doesn't seem to matter, because the upload itself seems to work; it seems it's the post-processing what is raising the error.
The funny thing is that the import itself seems to work (the contents of the SQL dump are imported), but the error message appears and causes confusion and support requests from our clients./var/log/sw-cp-server/error_log says:
2015/05/15 03:19:31 [error] 10215#0: *5 recv() failed (104: Connection reset by peer) while reading response header from upstream, client: XX.XX. XXX. XXX, server: , request: "POST /domains/databases/phpMyAdmin/import.php HTTP/1.1", upstream: "fastcgi://unix:/var/run/sw-engine.sock:", host: "xxxx. xxxxxxx.com:8443", referrer: URL.....To me it sounds like a timeout.
This seems to be a "popular" error among Plesk users, and I have tried this, this and this with no luck.
I want to restore a database from my repository. In the backup manager (root) I have Server repository & Personal FTP Repository. The personal repository I set to backup every day. The server repository I don't know where to set the backup option. There seems to be some random backups every 2 weeks or so.
In the personal ftp repository I have the backups of the last 7 days as tar files. When I want to radio button "Selected objects" it can not me highlighted. I am on plesk 12.0.18. (I ticked "Restore this backup despite the fact that it does not have a valid signature")In the server depository the files are .xml and there I can select what to restore but the backups are not current. I need the database from yesterday.How can I make my personal backups selectable?