Plesk 11.x / Windows :: All New FTP Accounts Broken - Home Directory Inaccessible
Oct 11, 2013
I have 11.5.30 and no new FTP accounts work. All I get when trying to connect is 530 User cannot log in, home directory inaccessible. I have run the command:
"%plesk_cli%
epair.exe" --reconfigure-ftp-site -webspace-name site.co.uk
removed and added the user again repairing in between. I have manually tried creating the user folder under default/6/localuser/username and setting permissions. I have checked the local windows account and the home directory is fine.
All old accounts create previously work fine. I could at least connect on the master FTP site with the local user folder but then it was read only.
View 7 Replies
ADVERTISEMENT
Jul 10, 2014
I don't know why, but only one server with Plesk 12 if i create additional ftp accounts not working. i receive error:
530 User cannot log in, home directory inaccessible.
If i use principal FTP account works fine.
View 5 Replies
View Related
Feb 17, 2014
Updates ran over the weekend and I can no longer login to the Plesk Panel. I'm getting the following PHP error: Fatal error: Call to undefined function get_gpc() in D:Plesadminhtdocsindex.php on line 3Click to expand...
View 1 Replies
View Related
Nov 12, 2007
to restore accounts (cpanel) from the /home directory due to corrupt o/s.
I found this
[url]
But its 3 years old. Is it still up to date at least? Would it work still with cpanel 11?
Also, I do have a backup drive which I have to remount (above is just in case the backups on 2nd drive are outdated). What is the proper way to remount the 2nd drive without deleting / formatting it?
View 6 Replies
View Related
Aug 18, 2012
Health Monitor Module is installed and running on server, but not visible under Server Administration Panel > Home > Server Health on Plesk Panel 11.0.9 update #7. Is there a trick to configuring home to show it and/or a direct way to launch view of server health?
View 17 Replies
View Related
Jun 16, 2009
As some of you may have noticed I have just signed up with Hawk Host. I had a question about the way the name your home directory. Lets say my full name is Chad Hawk. They have named my home directory /home/chadhaw . Is it normal for them to leave out the last letter of my last name or is that a typo. Or for that matter does it matter at all.
View 9 Replies
View Related
Jul 31, 2009
I am using Windows Server 2003 SP2 Standard Edition. I have installed Active directory and created users and their home folders. Everything works fine except a problem.
When a user from the domain uses the UNC to connect to the server, it shows the shared folder. The user can view and change all other users files, home directory etc. The user can browse all the folders.
I need it to be setup so that the user can only view his own home folder and files and not others. Also when using UNC to browse the server, I want an administrator authentication even if the user is from the same domain.
Here are my current permissions.
NTFS Root folder permission
=================================
Administrators - Full Control
CREATOR OWNER - Special Permission
System - Full Control
Domain Users - Read & Execute, List Contents, Read, Special Permissions.
Share permission of root folder
================================
Domain Users - Read
NTFS Permission for user home folders
=====================================
Created User - Full Control
Administrators - Full Control
CREATOR OWNER - Special Permission
System - Full Control
Domain Users - Read & Execute, List Contents, Read, Special Permissions.
View 2 Replies
View Related
Feb 24, 2008
I'll mention this is a cPanel/WHM server with about 15 accounts on it.
I get an e-mail everyday from my server's backup script telling me what new or changed files it found. Yesterday this summary was massive, and it showed new or changed files in these directories:
/proc
and
/home/virtfs
The type of files it contains:
"/home/virtfs/[username]/proc/140/task/140/exe"
"/home/virtfs/[username]/proc/139/exe"
"/home/virtfs/[username]/proc/139/task/139/exe"
"/home/virtfs/[username]/proc/227/exe"
"/home/virtfs/[username]/proc/227/task/227/exe"
"/home/virtfs/[username]/proc/374/exe"
The /home/virtfs directory is something I haven't seen before, and it contained two directories belonging to two accounts on the server.
Does anyone know why these directories would be created or what they are for? The bit of reading I've done on this so far mentions that these directories will be created as a result of jailed SSH, but neither of those two accounts have ever had jailed SSH enabled.
View 2 Replies
View Related
Apr 23, 2008
Is it possible to add another hard-drive and attach it to increase the size of the /home directory?
Beginning to run out of space.
View 6 Replies
View Related
Apr 21, 2015
I tried to set up a site with a "dedicated" IP without SSL, and ran into this problem again. The new IPs (v4 or v6) are not reachable, pingable, or trace routable from outside the container, even from its PCS hardware node.This is what I get after adding the address in PPA:
Code:
# cat ifcfg-eth0
DEVICE="eth0"
ONBOOT="yes"
BOOTPROTO=static
[code]....
By contrast, if I add an IP address through PVA, it is pingable. Note the differences, namely that PVA's ifcfg-eth0:0 has "BOOTPROTO=static" and the IPs double quoted. For those testing at home also note that PVA removed the existing IPv6 addresses (that it didn't know about).
Code:
# cat ifcfg-eth0
DEVICE="eth0"
ONBOOT="yes"
BOOTPROTO="static"
GATEWAY="x.x.194.1"
IPV6_DEFAULTGW="aaaa:bbbb:0:4c::1"
[code]....
Could that make a difference? Why I can't seem to get secondary IPs to work?
View 5 Replies
View Related
Jan 13, 2007
When I'm adding a new account, I got some error:
[url]
How can I fix that?
View 8 Replies
View Related
Feb 25, 2015
I use plesk 11, I was creat sub directory: domain.com/test. but I access via test.domain.com is ok, but domain.com/test is error " page not found" how to I access via domain.com/test ?
View 2 Replies
View Related
Aug 12, 2012
1. I create my first domain aaa.com, plesk create c:intetpubvhostaaa.comhttpdocs,
2. now i create another domain bbb.com via plesk control panel, it creates both directory :
c:intetpubvhostaaa.combb.com
c:intetpubvhostbb.comhttpdocs
3.the issues here, after config DNS from domain provider, i access to domain bbb.com on the brower, plesk use the index file in c:intetpubvhostaaa.combb.com .
i want c:intetpubvhostbb.comhttpdocs is public directory folder for domain bbb.com
View 2 Replies
View Related
Oct 16, 2013
Next error:
C:Windows>"%plesk_bin%mchk.exe" --all --fix=all
Data error (cyclic redundancy check). (Error code 23) at BCryptDecrypt()
I restore all mail accounts from backup and use this command : "%plesk_bin%mchk.exe" --all --fix=all
How can I fix this?
View 3 Replies
View Related
Sep 28, 2008
I am trying to migrate a server to a new host.
When I try to restore a full backup on my new host, NONE of the home directory files are making the move. Everything else is fine though.
I'm not getting any errors, so I don't have a clue as to why this isn't working.
View 5 Replies
View Related
Apr 19, 2008
I moved the home directory for apache from /usr/local/apache2/htdocs to /home/username/www
When I go to browse the site, I receive a 403 error, You do not have access to / on the server.
It gave the OK default page for apache before moving so I am assuming it is a permission issue.
What do I need to do? apache is running as the default "daemon" user and group.
View 10 Replies
View Related
Oct 30, 2007
created one problem for us cpanel
in create new account:
[an error occurred while processing this directive]
Setting up FrontpageŽ...
/home/create1/public_html does not exist or is not a directory!
View 8 Replies
View Related
Sep 24, 2014
I need a private directory under {WEBSPACEROOT} e.g. d:/inetpub/vhosts/domain-name/ .
This is possible under the other's dedicate webserver running plesk for linux. (as a matter of fact linux version of plesk has a folder called private, for example to hold php files not accessible via http)
I have create this directory but is not accessible via php, and seems that is not possible to set the permission for the domain-owner.
I have set the desired path in open_basedir but this is have no effect...
View 1 Replies
View Related
May 1, 2014
I use Nas to manage the customer site folder.
So the folder directory will be "as1webhostxxx" this format
I found that plesk panel default directory is inetpubvhosts
How to move the Virtual Hosts Directory to Nas ?
View 9 Replies
View Related
Dec 22, 2013
I have a vps server and i am trying to create ftp account and i am getting this error:
Unable to start (/c ""C:Program Files (x86)ParallelsPleskadminbinserverconf.exe" --list"): (267) The directory name is invalid.
---------------------- Debug Info -------------------------------
0: Exec.php:43
plesk_proc_open(string '"C:Program Files (x86)ParallelsPlesk/admin/binserverconf" --list', array, string 'C:Program Files (x86)ParallelsPlesk/tmpagent78f0fd54abecb83b12f6c9fdde9b5b84', array)
1: Exec.php:43
[Code] ....
View 9 Replies
View Related
Jun 28, 2015
I am using the Plesk 12 in windows server 2008.
I want to export the email accounts in Plesk into a CSV file.
View 1 Replies
View Related
Aug 13, 2014
Since I upgraded to Plesk 12, when I create a new subscription, an IUSR account is no longer created for that website so I can grant the appropriate permissions to folders, etc.
View 2 Replies
View Related
Apr 7, 2014
I wan to take backup of all accounts on weekly basis. Client should see weekly backup in his backup manager list.
How take backup of each account individuality.
View 3 Replies
View Related
Jun 10, 2015
I want to set plesk to allow the overuse for disk space and bandwidth for my customers, but not for e-mail accounts.
If I do not allow overuse, what exactly happens when a customer exceeds the use of resources? The plesk panel immediately stops all the customer's services? Or what?
Moreover: is there a diagnostic utility to understand if the plesk panel is working correctly and is correctly installed?
View 2 Replies
View Related
