I recently got my very own dedicated server, as in bought one and it is sitting in my desk right now.
I've installed Centos 4.4 (that's what my web server uses, so I just use it for continuity), connected it to my router.
I've gone through a lot of different steps and here's where I am right now:
Because I have a dynamic IP address, I use a free service to direct towards my server. [url]. It works just fine.
I also have to port forward port 80 to go to the server, instead of my laptop or the other desktop currently running off of our router.
I don't know how to set up a web account on the server, so I discovered UserDir. I enabled it in the httpd.conf file. But when I try to access it [url]I get a permissions error. I've made sure the directories are CHMOD'd correctly... so I don't know why I can't access it.
FTP session opened. unable to open TransferLog '/usr/local/psa/var/log/xferlog': Too many levels of symbolic links chroot to '/var/www/vhosts/domain.com' failed for user 'user': Permission denied error: unable to set DefaultRoot directory FTP session closed.
I'm migrating from shared hosting to a VPS. I have transferred my files right over, and permissions are all the same as they were on the old server.
The fopen scripts are giving me an error when trying to write to files.
Code: failed to open stream: Permission denied
The permissions on the file are 644 and it can read from the file just fine. Giving the file world write permissions fixes the problem, but I don't want to do this for obvious reasons.
I think the reason this worked on the shared server had something to do with the apache user being defined differently but I'm honestly not sure. The php file executing the command is owned by the user that owns the document I'm trying to write to (in fact one user owns everything).
how I can fix this without giving world write permissions?
I am running wordpress for ecommerce using httpd-2.4.12 on my Ubuntu Server 12.04.5. The problem I have is some unknown clients received the message that reads "You don't have permission to access the product on this server" when they were trying to access to the Product page to make a purchase.
When I tested on all of my devices, I did not have any issue with accessing to the page. I know that the page is a secure page with https.I've looked into the apache logs file and found nothing that's related to 404 or 403 errors there.what I have configured for my httpd.conf.
I'm noticed I was getting bounced email errors from a company I was sending email through and I further investigated this by running a dnsreport on my domain.
Turns out that it fails at Acceptance of NULL <> sender, Acceptance of postmaster address, and Acceptance of abuse address. The domain that I ran a test on is using a new IP that I had recently added to my Direct Admin server. None of the other domains on my server are having issues like this.
Is is possible that I need to do something to enable these new IP addresses in exim? I mean, exim obviously responds to that IP address, but it seems to be having some issues with it.
im sitting on a VPS with cpanel+exim 4.66 installed. email accounts are working & i can receive/send emails. however im getting a few errors from some servers that i send email to
Code: firstname.lastname@example.org SMTP error from remote mail server after RCPT TO:<email@example.com>: host asdf.mail.asdf.net.au [184.108.40.206]: 550 Reverse DNS is not setup correctly for this host. At the moment, my VPS has 3 IP addresses, which are (imaginary) 192.168.0.1, 192.168.0.2, 192.168.0.3,
Exim is currently sending emails(webmail, smtp auth'd php scripts) via 192.168.0.3
my domain.com at the top level resolves to 192.168.0.1, mail.domain.com resolves to 192.168.0.3(aname - should this be a cname?) and the MX pointer record points at mail.domain.com
if i do a reverse lookup of my 192.168.0.3, it resolves to:
Code: 192.168.0.3 resolves to "220.127.116.11-static.reverse.softlayer.com"Top Level Domain: "softlayer.com" which is my VPS host.
Have i configured something wrong here? should 192.168.0.3 be resolving to my domain.com instead?
In Plesk 12.0.18 #4 I checked Grant the ALTER DATABASE permission to all Microsoft SQL Server database users . The problem is I cannot rename database tables or other functions with myLittleAdmin for SQL provided with Plesk.
My question is: Am I doing something wrong or is needed to upgrade the myLittleAdmin license to Full version?
suddendly some of my sites in my server is taking sessions errors...then after a while all its going ok and then again the same problem...the problem still continues.from what might be the problem?a php update?mysql update?any exprerience?
i havent made any change.my server is linux has centos 4.7
i am tring to setup my own nameservers for the past two days but couldn't get them to work.
i hve already created the ns at godaddy.com. and created dns zone file with corress ponding ips in my vps
iam getting the following error on the dns report. can anyone help me fix them......thanks aloot
Errror 1: FAIL: Lame nameservers ERROR: You have one or more lame nameservers. These are nameservers that do NOT answer authoritatively for your domain. This is bad; for example, these nameservers may never get updated. The following nameservers are lame: xxx.xxx.xxx.xxx < -- my ips xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx
Errror 2: FAIL : Missing nameservers 2 ERROR: One or more of the nameservers listed at the parent servers are not listed as NS records at your nameservers. The problem NS records are: ns3.mydomain.com. ns4.mydomain.com. ns5.mydomain.com. ns6.mydomain.com.
Error 3: FAIL : Single Point of Failure
ERROR: Although you have at least 2 NS records, they both point to the same server, resulting in a single point of failure. You are required to have at least 2 nameservers per section 2.2.
Error 4: FAIL SOA Record No valid SOA record came back: is not mydomain.com.
There is 1000MBPS network set up between three computers and server.
Server has files which program saves.
Program is being run in three different computers.
Each computer tries to get into same file (eg last bill) that was created before. First computer goes in within seconds. second minutes and third just crashes. No matter which computer runs it first, last one crashes.
So called "server" is running on Windows XP pro since it just needs to keep one program files. However I cant find out whats causing file sharing over network bug that crashes access to same file if connection from many computers.
I have had my websites hosted with 1and1.fr for nearly 3 years now and have never had the slightest issue with them. I used to host a static average traffic website plus a punBB forum and some low traffic joomla based websites (nothing that needs much power as you can see).
A week ago, I bought a website (wordpress blog) and the guy included two proxies in the sale. I installed the two proxies and had a lot of trouble installing the wordpress blog so I moved it to another host where it now works all right. However, I am still getting 500 Internal Server Errors on my initial host (I thought it was caused by the wordpress blog) on all my websites hosted at 1and1 and it happens almost every other page!
I have many questions:
- are the proxies the cause?
- how can I know my websites have been moved to another server?
- do you think a VPS can solve the problem, or do I need a dedicated server?
- what is the best solution for hosting proxies?
I have sent a ticket to them yesterday and I am still waiting!
I moved over a 400mb ish forum database for VBB to another server and ran into
MySQL Error : Duplicate entry '0' for key 1
Which I imagine would have to do with auto incriment? What can I do about this? Is there a way I can bring it over and not hit this? Way to fix it? In the meantime all of the viewers cannot use the forum because I was forced to put it into maintenance mode so that no one can run into errors etc.
After upgrade to Parallels plesk v 12.0.18 update #5 we were getting a blank screen. We have managed to get logged into the server but have errors - plus all the websites are down with a 404 error Apache Server at gardenbuildings.domainame.co.uk Port 443.
On the Plesk management it is showing: New configuration files for the Apache web server were not created due to the errors in configuration templates:
mkdir: cannot create directory `/var/www/vhosts/system/domainname.com/conf': No such file or directory mktemp: failed to create file via template `/var/www/vhosts/system/domainname.com/conf/httpd.conf.XXXXXX': No such file or directory Can not create temporary file .
Detailed error descriptions were sent to you by email. Please resolve the issues and click here to generate broken configuration files once again or here to generate all configuration files.
Also when trying to resolve the issues and generating all configuration files I am getting this error:
I tried to add ac new subscription and this failed.No I have an inconsistent subscription and get the following error: New configuration files for the Apache web server were not created due to the errors in configuration templates:
Template processing failed: file = /opt/psa/admin/ conf/ templates/ default/domainVhost.php, error = Template_Exception: No data. file: /opt/psa/admin/plib/Template/Processor.php line: 28 code: 0 Previous error: Template_Variable_Exception: No data. file: /opt/psa/admin/plib/Template/Variable/AbstractCachedData.php line: 67 code: 0. Detailed error descriptions were sent to you by email.click here to generate broken configuration files once again or here to generate all configuration files.