How can I use:
ns1.domain.com
ns2.domain.com
both with the same IP?
I figured out that since they are both hosted on one server it doesn't really matter if it'll be 2 different IPs or a single one so I decided to be more economic
Only thing is that through Cpanel (Networking Setup -> Nameserver IPs) I can't add two nameservers with the same IP...
I have 2x servers with the following os/control panels:
1x Windows Server 2008 running Plesk 9.2
1x Centos 5.3 running cPanel/WHM
What I wish to do is to point all of my domains to the nameservers:
ns1.domain.com
ns2.domain.com
But, the domains hosted could be on either of the boxes above (because some sites are ASP.NET and others PHP).
Each of the above machines are running BIND and I have not yet setup nameservers on either of them. How should I proceed with this?
In addition (for arguments sake), if I then add additional servers how would I then achieve the same?
If there's already stuff around on the forum (I've done a search but found nothing specified to my issue of running a windows and linux box with completely different control panels) please point me in the right direction.
Let's say I've got a VPS plan that comes with either 4 or 8 IP addresses (still deciding which to get).
Now let's say I want to set up multiple NameServers within that account. Example:
ns1.mymainsite.com
ns2.mymainsite.com
ns1.anothersite.com
ns2.anothersite.com
ns1.yetanother.com
ns2.yetanother.com
ns1.lastone.com
ns2.lastone.com
Can this be done? Or not?
I run a small hosting company and i have been using multiple (different) nameservers for different servers, for example...
Nameserver IP
ns1a.domain.com 192.168.0.1
ns2a.domain.com 192.168.0.2
ns1b.domain.com 123.123.0.1
ns2b.domain.com 123.123.0.2
How do i make it so i can have ns1.domain.com and ns2.domain.com pointing to all different my servers?
Lets say for example I have 10 servers independent of each other. I want to be able to have only 2 Nameservers, NS1 and NS2 where all the domains should resolve to and then they should be handed off to one of the 10 servers. I dont want to have 20 Nameservers for example NS1 thru NS20 for all 10 servers. That would also be a waste of IP addresses.
I have a few murky solutions in mind. I would appreciate if someone would shed some light on the issue,
how to set 2 name servers with a single IP address via cPanel?
View 10 Replies View RelatedHow to reduce downtime - multiple name servers ?
Say I have two different hosting accounts at two different web hosts. One at host1.com and another at host2.com. In both the hosts I keep the same files. I use an external registrar and use the name servers for one of my domains as follows:
ns1.host1.com
ns1.host2.com
ns2.host1.com
ns2.host2.com
What would happen in that case, if say host1 is down sometime? Will the name servers point to host2.com?
If this could work, then the probability of downtime of a site would become almost 0 .
Google will like this ?
Another question is how to easily sincronize both cpanel accounts?
Can the same nameservers be used on multiple servers/vps on different geographical locations and if so, how are they setup? That would save me quite some money. Hoping for some input.
View 8 Replies View RelatedSay if I have a domain www.example.com.
And two completely different physical dedicated servers with IPs 11.11.11.11 and 22.22.22.22
Is it possible to make a nameserver,
NS1.EXAMPLE.COM (33.33.33.33)
NS2.EXAMPLE.COM (44.44.44.44)
^^^^^^^^^
(The two IPs of the nameserver have been assigned to server 11.11.11.11)
to point to 11.11.11.11 and have two other name servers
NS3.EXAMPLE.COM (55.55.55.55)
NS4.EXAMPLE.COM (66.66.66.66)
^^^^^^^^
(The two IPs of the nameserver have been assigned to server 22.22.22.22)
to point to 22.22.22.22 and have two other name servers
I am pretty sure this wont work for some reason but I cant figure out why
I have a Windows VPS with Solarvps.com and I am satisfied....Now I want to access paypal account through Remote Desktop...I have multiple paypal account and want to login always with a specific IP address to specific paypal account..
My question is IS there a short way or a software which can change my servers IP address..Coz changing the whole settings is a tiresome process..
I'm trying to figure out how I would host 20 or so websites using one static IP address and 2 servers, on a network behind a router.
I think I have edit the Apache config files, but that's driving me crazy. Is there any other easier way?
how to assign multiple shared IP address on a VPS?
View 9 Replies View RelatedI currently host my own website with windows server 2003, it is a long ip address. I use a DNS redirector service to make it a real domain name. I was wondering if I can host more than one website?
View 2 Replies View Relatedis there a host that lets me add on as many unique ip as i want for extra cost?
for example, i want to test out several prototype .com sites on the same server. however, i want a unique ip for each site.
I have a dedicated server hosted in some data center. The server provider has provided me an IP address. I have bought a a domain name which redirects the traffic to that IP.
I have not been provided with any nameserver.
My question is is it possible that I register multiple domain names against the same IP address? If yes how?
We are looking for a solution to support multible IP's for different domains in one subscription/cusomer Account. Current, we have 4 IP's as shared. the Customer can choose under "Web Hosting Access" , which IP he wants to use.
This setting effect all domains in his Account. So it is not possible to set domain1.tld to e.g. IP 1.1.1.1 and domain2.tld e.g. to 2.2.2.2
We like to offer the cusomers one cusomer account with multible IP's
Will the nameservers work if the nameservers are pointed to a parking page?
For example:
I need to change my nameservers to ns1.mywebhost.com and ns2.mywebhost.com
(nameservers are made up)
These nameservers are from my web hosting service provider. When I visit the nameservers, it shows up a parking page from a domain parking service (let's say NameDrive parking page)
Will the nameservers function correctly and will my websites work? I have this question because usually the nameservers that I use, they always point to a CP page or something like that rather than a parking page.
I have two domains as virtual hosts on same IP address.
I am getting certificate error for the second domain when I try to check email (using MS Outlook). I can't permanently "accept" certificate, it complains again and again. Certuficate I created and self signed for imap.domain1.com, but the second email server is imap.domain2.com, so it complains.
How do I set separate email certificates for two domains? Is it possible at all?
My customer has an external facing Apache server that is acting as a reverse proxy to two internal applications. They have:
- external addresses for each app which resolve to different ip addresses, so app1.their_domain.com and app2.their_domain.com resolve to 77.3.170.10 and 77.3.170.11 respectively.
- the Apache server has two network interfaces with ip addresses 192.168.10.10 and 192.168.10.11
- the external ip addresses resolve to the above internal addresses
- the firewall between the Apache server and the internal app servers is configured to allow traffic from 192.168.10.10 to reach app_server1, and traffic from 192.168.10.11 to reach app_server2, both using port 7777.
I have configured a virtual host in httpd.conf for each ip, i.e.
Code:
<VirtualHost 192.168.10.10:80>
...
ProxyPass /app http://app_server1:7777/app
ProxyPassReverse /app http://app_server1:7777/app
RewriteRule ^/$ /app/app1 [R,L]
...
<VirtualHost>
and
Code:
<VirtualHost 192.168.10.11:80>
...
ProxyPass /app http://app_server2:7777/app
ProxyPassReverse /app http://app_server2:7777/app
RewriteRule ^/$ /app/app2 [R,L]
...
<VirtualHost>
This works fine in that the external address are being routed to the correct application, however the firewall is blocking requests to the second app as it appears the requests are coming from the Apache servers 'primary' ip address 192.168.10.10 instead of 192.168.10.11.
Is it possible to send requests using the ip address from the relevant VirtualHost?
Windows server 2008
Apache 2.2
Depending on where u are at on my site (documents pages, training, main root, etc.) will depend on which type of background, footer, header and the like you'll get. Now I was thinking. Is there a way to have multiple error messages for more then one page depending on where you are at on a site? Right now it's intranet site and a modded snitz forum. What is the code and were does it go and in which apache conf file(s) does it go in?
View 1 Replies View RelatedI am using virtuozzo firewall to secure access.
I enter 58.27.175.211/255.255.255.0 for Source Address and Netmask for port 22.
But still I can connect using 58.181.103.217 or 58.27.151.120.
Second is it possible to enter two different ip address in source address?
I just bought a new ip address and want to setup this new ip as my server's main ip, making the 'existing main ip' as the secondary ip.
Which means, this new ip will be the server's default ip address for all services, including when connecting to other server.
I'm using CentOs 4.5 and swsoft's panels: HSPcomplete & Virtuozzo Power Panel, and Webmin.
I want to redirect a website to a particular URL so that the address bar shows the same URL and not the destination URL. I know it is possible via URL masking, however, I want it in such a way that whenever somebody clicks on any link in the website, the address bar should still show the original URL. To put it in simple words, Suppose I want to redirect [url] to [url]. Now if there is a link named contact/index.htm and somebody clicks on it the address bar should display [url]and not redirect to [url]
How can it be possible using URL Rewrite method in .htaccess file?
The problem usually goes like this:
- I can't access the webserver
- I'll try to restart httpd, and I'll get
Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:443
To fix this, I run
[root@www1 ~]# lsof -i tcp:443
COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME
perl 11307 apache 4u IPv6 476943447 TCP *:https (LISTEN)
There is always leftover process that is causing the restart to fail. Once i force kill the process, I am able to restart httpd properly.
Now it is ok if this just occurs once in a while, but this problem keeps repeating itself almost everyday at 4am server time (cron time?). What can I do to permanently fix this?
Will domains still function if they have differing nameservers at the registry from what they do on the server side? i.e. domain1.com pointing to ns1/2.example.com at the registry but on the server the DNS zone has it as ns1/2.example2.com, baring in mind both sets of nameservers are pointing at the same server.
View 2 Replies View RelatedI have purchased a reseller account from www.reseller.net (not real names) They provide me with ns1.reseller.net and ns2.reseller.net, as well as the two associated ip addresses. They tell me to use these 2 ip addresses to set up my own custom nameservers.
I want my own nameservers - ns1.mydomain.com and ns2.mydomain.com. Tech support at www.reseller.net tells me thay cannot help me. They tell me to go to the company where I purchased and manage the domain name www.mydomain.com.
I do, and find the control panel page where I -CREATE NAME SERVER-. This I do, and I use the above mentioned ip addresses. This seems to work. When I go back to this control panel page the next day, the entries I made are still there. Yet, I cannot "ping" my nameservers.
Now what? I have tried "google-ing" and not being a super-tech, I get lost. It appears that I must make some changes in my WHM, (I have a WHM...), but I have no access to any "Server" settings.
I have another reseller account with a totally different company, and when I asked them to set up custom nameservers, they just "did it" for me. Again, the hosting company was not related to the domain registering company.
I am experimenting with setting up my first unmanaged dedicated server.
I have directadmin as a cp.
I have 5 separate IP's available to me.
I went to my domain registrar and set up host as ns1.mydomain.com and ns2.mydomain.com using my first two IP's that are available.
My question now is what is the best way to use my three remaining IP's? Do I set them up as completely different domain nameservers ie. ns1.otherdomain.com etc.? Out of those three, I thought you need two IP's per nameserver domain? Is that wrong thinking?
I don't want any relationship shown in a whois dns info between the ips.
How to configure DNS(nameservers) without cP/WHM and any other Control Panel. I can use your only SSH for it.
OS = CentOS5
DNS Server: Bind
If i create a vps using openvz and use a new ip for that vps e.x:
123.456.789.0
What nameservers i must use to point my domain to that vps?
NS1 <--- 123.456.789.0
NS2 <--- ?