Multiple Servers 2 NameServers
Apr 30, 2007
I run a small hosting company and i have been using multiple (different) nameservers for different servers, for example...
Nameserver IP
ns1a.domain.com 192.168.0.1
ns2a.domain.com 192.168.0.2
ns1b.domain.com 123.123.0.1
ns2b.domain.com 123.123.0.2
How do i make it so i can have ns1.domain.com and ns2.domain.com pointing to all different my servers?
View 2 Replies
ADVERTISEMENT
Jul 16, 2009
I have 2x servers with the following os/control panels:
1x Windows Server 2008 running Plesk 9.2
1x Centos 5.3 running cPanel/WHM
What I wish to do is to point all of my domains to the nameservers:
ns1.domain.com
ns2.domain.com
But, the domains hosted could be on either of the boxes above (because some sites are ASP.NET and others PHP).
Each of the above machines are running BIND and I have not yet setup nameservers on either of them. How should I proceed with this?
In addition (for arguments sake), if I then add additional servers how would I then achieve the same?
If there's already stuff around on the forum (I've done a search but found nothing specified to my issue of running a windows and linux box with completely different control panels) please point me in the right direction.
View 9 Replies
View Related
Apr 26, 2007
Lets say for example I have 10 servers independent of each other. I want to be able to have only 2 Nameservers, NS1 and NS2 where all the domains should resolve to and then they should be handed off to one of the 10 servers. I dont want to have 20 Nameservers for example NS1 thru NS20 for all 10 servers. That would also be a waste of IP addresses.
I have a few murky solutions in mind. I would appreciate if someone would shed some light on the issue,
View 8 Replies
View Related
May 7, 2009
Can the same nameservers be used on multiple servers/vps on different geographical locations and if so, how are they setup? That would save me quite some money. Hoping for some input.
View 8 Replies
View Related
Feb 11, 2007
Say if I have a domain www.example.com.
And two completely different physical dedicated servers with IPs 11.11.11.11 and 22.22.22.22
Is it possible to make a nameserver,
NS1.EXAMPLE.COM (33.33.33.33)
NS2.EXAMPLE.COM (44.44.44.44)
^^^^^^^^^
(The two IPs of the nameserver have been assigned to server 11.11.11.11)
to point to 11.11.11.11 and have two other name servers
NS3.EXAMPLE.COM (55.55.55.55)
NS4.EXAMPLE.COM (66.66.66.66)
^^^^^^^^
(The two IPs of the nameserver have been assigned to server 22.22.22.22)
to point to 22.22.22.22 and have two other name servers
I am pretty sure this wont work for some reason but I cant figure out why
View 12 Replies
View Related
Jan 30, 2007
How can I use:
ns1.domain.com
ns2.domain.com
both with the same IP?
I figured out that since they are both hosted on one server it doesn't really matter if it'll be 2 different IPs or a single one so I decided to be more economic
Only thing is that through Cpanel (Networking Setup -> Nameserver IPs) I can't add two nameservers with the same IP...
View 3 Replies
View Related
Oct 10, 2008
Let's say I've got a VPS plan that comes with either 4 or 8 IP addresses (still deciding which to get).
Now let's say I want to set up multiple NameServers within that account. Example:
ns1.mymainsite.com
ns2.mymainsite.com
ns1.anothersite.com
ns2.anothersite.com
ns1.yetanother.com
ns2.yetanother.com
ns1.lastone.com
ns2.lastone.com
Can this be done? Or not?
View 3 Replies
View Related
Mar 3, 2009
How to reduce downtime - multiple name servers ?
Say I have two different hosting accounts at two different web hosts. One at host1.com and another at host2.com. In both the hosts I keep the same files. I use an external registrar and use the name servers for one of my domains as follows:
ns1.host1.com
ns1.host2.com
ns2.host1.com
ns2.host2.com
What would happen in that case, if say host1 is down sometime? Will the name servers point to host2.com?
If this could work, then the probability of downtime of a site would become almost 0 .
Google will like this ?
Another question is how to easily sincronize both cpanel accounts?
View 7 Replies
View Related
Aug 2, 2009
I have two VPS packages.
Both are running exactly the same stuff - Centos 5.3, cPanel/WHM, etc
One domain (example.com), already pointing to first server (server1)
Nameservers (ns1 & ns2.example.com) are set up in WHM of server1.
I then bought a second VPS (server2). I want to be able to set up subdomains of my main domain (sub.example.com) on the second VPS. I also want my existing nameservers to work for server2.
This way, I can provide subdomain packages to people and utilise both servers, and I can also provide the same nameservers to people regardless of the server they are on.
I went to the clustering section of the WHM's, I enabled, and I can see server1 in the WHM of server2, and the other way around. I selected Sync Changes under DNS Role. However I don't think that's really done anything.
How can I get this to work? Sorry if I've written it in a confusing manner.
View 6 Replies
View Related
May 19, 2009
I currently have 2 web servers both running the cPanel Control Panel.
Out of the two servers only one is used and the other is just used currently to test scripts. It has come to a stage with the website capacity that I now require both servers to run in con-junction with each other to spread the load.
Questions:
1) There is a file upload service, How would you go about networking both the servers to allow remote removal / uploading of files to different servers. Eg, If user is on server 1 and files are stored on server 2. Also deletion of files etc - The website is programmed mainly in PHP.
2) File updating - The website is constantly being updated and therefore both servers will need the PHP files to be in sync. How would you go about doing this?
Both servers are at the same Data Center location.
View 3 Replies
View Related
Mar 9, 2008
We are looking for KVM/IP solution for multiple server. Where we can add the users remotely and give temporary access to the server owners. Once they are done we remove them from access list. So it can be used by someone else.
Anyone know for KVM/IP solution with kvm switch which can solve our purpose of KVM.
View 5 Replies
View Related
Jun 17, 2008
I currently have two servers, one is rhel 5 with cpanel, the other is windows 2003 with plesk 8.4
Each server wants you to setup a Hostname... one that is FQDN but not being hosted on that server so I setup a generic dns domain as follows...
SERVERCODNS.COM
Now for the hostname I setup both servers to be use this domain but different prefix... so...
SERVER1.SERVERCODNS.COM
SERVER2.SERVERCODNS.COM
Is this ok? Will I have problems?
My cpanel continues sending me emails nightly that my DNS is routing to another ip?
which bring sup my next question...
Is is ok to NS1.SERVERCODNS.COM, NS2.SERVERCODNS.COM for say the RHEL server and then DNS1.SERVERCODNS.COM and DNS2.SERVERCODNS.COM for say the windows? Is this going to cause problems?
Whats the difference or proper procedure for setting up DNS with my registrar (*ENOM) vs in the control panels they have Nameserver tools?
View 5 Replies
View Related
Aug 25, 2008
if it is possible to use more than 2 regular DNS entries across 2 hosts? So if a site goes down the other host picks it up?
View 12 Replies
View Related
Dec 3, 2008
I have a website.
I have it on 2 different servers.
This is because if the first server goes down for whatever reason, i dont want the site to go down.
To get this to work, is it just a case of adding more nameservers to the domain?...
becuase this doesnt seem to be working... the domain seems to always resolve to the server that is listed last in the list of nameservers...
View 6 Replies
View Related
Jan 31, 2008
Has anyway come up with a way to have several servers connected to one external CD-ROM on a USB Hub/network? This could allow a few external CD-DRIVES to handle a whole rack and the possibility of setting the bios via KVM/IP on a server to boot from CD, then it would boot from the CD tied in on the USB "network". Maybe using a USB hub? Or would this cause possible security issues having multiple servers tied in via USB ports?
I would love to have the ability to have maybe 3 or 4 CD-ROMs tied into multiple servers for OS installs remotely without having to actually go into the DC for this. You could put the CD-ROMs on your APC reboot and just turn on the one you need and set the bios to boot from CD (ie: one drive could have CentOS, one could have Windows, etc)
I'd be interested in some ways people have done this or what they use.
View 2 Replies
View Related
Mar 9, 2007
I have a firebox firewall and two servers. I don't one machine to see the other one the network. The servers are for two different clients. However I would like to be able to access a backup folder on Server 2 from Server 1. What is the best setup for this?
View 0 Replies
View Related
Mar 9, 2007
I have a firebox firewall and two servers. I don't one machine to see the other one the network. The servers are for two different clients. However I would like to be able to access a backup folder on Server 2 from Server 1. What is the best setup for this?
View 0 Replies
View Related
Oct 24, 2007
Does anyone know how I can run multiple servers. But still use the same Domain name.
Such as server one with ip 547.547.547.547 uses domain www,m1.domain.com
and server two has ip 547.548.548.548 but uses domain www,m2.domain.com
View 5 Replies
View Related
Jun 13, 2009
What is the best way to run one command on multiple servers. Security isnt too much of an issue as I'll be doing a master/slave type setup, with the master being a system in the office with no ext access.
I'm thinking pssh is going to be quick and easy, what do you use?
View 8 Replies
View Related
Jun 4, 2009
A website I am involved with may soon hit a problem due image uploading being stored on only one server. We are unable to find a realistic solution which would allow us to upload images from 1 central location.
The website is programmed in PHP and is on a standalone web-server - currently the images are uploaded to the same directory as the website however we are looking to move the images to another server for scalability.
Is it possible at all to upload using a directory link of some kind, eg, the directory would be /serverip/path/to/images which you would upload to? Or any other realistic approaches that you know off.
View 8 Replies
View Related
Nov 1, 2009
Is it possible to combine multiple servers via "Configure Cluster"? Will the hosting domains use same ns1.mydomain and ns2.mydomain.com if one server is located in UK and second is in USA Datacenter. Can somebody provide me information with explanation?
View 3 Replies
View Related
Feb 5, 2008
I run a vbulletin based web forum ([url] and everything is going quite smoothly. We are currently in the process of getting a partnership with a supplement store.
Basically, our goal is to have our own store for Lean Bulk, but it will be run by a different company, and will be on their server.
Soo, the store database and custom script will be staying on their server, but my forums will be staying on my server. What I want is for the store to be located at [url]or [url]
Either one works for me. However, the tech guy that runs all the stuff for the store, is trying to tell me that this is "impossible." While it might be somewhat difficult, I have a hard time believing anything is really impossible.
The tech says the only thing we can do is have the store located at:
[url]
Personally, I think this looks unprofessional, and would rather stay away from this solution.
View 11 Replies
View Related
Nov 11, 2008
I purchased a domain, domain.com, from GoDaddy.
I have 5 servers, 2 running CentOS and Apache, 3 running Windows Server 2003 and IIS. Each server has it's own dedicated IP address, so I can access each site by going to [url]
Would I would like to be able to do is set each of these servers up with a subdomain on my domain.com. So I would have [url]going to one server, [url]going to another server, etc.
I logged into GoDaddy's Domain Manager. However, it appears that the only form of subdomains they have is redirection. So while I can create server1.domain.com, it merely redirects to [url]
I can mask the forward, but this creates problems with the login on the servers because they use cookies. In addition, the address always appears as [url], it doesn't have the "index.html" or "/login/login.aspx" when
I click links. The actual links appear as "[url] and not "[url]
Is there anything I can do? I want the subdomains to point to a particular IP address, not redirect.
View 4 Replies
View Related
Nov 26, 2008
I have a server with plesk8 installed. I forsee a time when I shall need either to move to a new bigger server or to add a new bigger server to what I already have.
Problem is, my isp says that PLESK will only work on single server set-ups and can't work in a multi-server environment.
View 2 Replies
View Related
Feb 5, 2008
I run a vbulletin based web forum [url] and everything is going quite smoothly. We are currently in the process of getting a partnership with a supplement store.
Basically, our goal is to have our own store for Lean Bulk, but it will be run by a different company, and will be on their server.
Soo, the store database and custom script will be staying on their server, but my forums will be staying on my server. What I want is for the store to be located at [url]
or [url]
Either one works for me. However, the tech guy that runs all the stuff for the store, is trying to tell me that this is "impossible." While it might be somewhat difficult, I have a hard time believing anything is really impossible.
The tech says the only thing we can do is have the store located at:
[url]
View 9 Replies
View Related
Nov 10, 2007
I was talking to my host the other day about configuring multiple servers as a private LAN. I was wondering if anyone has successfully set up a configuration of using separate servers for each task for shared hosting accounts. I.E. Having certain servers as web servers and others dedicated as MySQL servers, e-commerce servers, mail servers etc.
Does anyone do this? I can see it boosting performance.
View 2 Replies
View Related
Mar 6, 2007
I have been trying to setup SPF records for all of our hosting servers but need some assistance.
Lets say we have three servers with the following RDNS:
ns1.server.com
ns2.server.com
ns3.server.com
Would we create one SPF for server.com and add it to the DNS zones on each server?
Or should we create a separate SPF for each server?
View 4 Replies
View Related
Jan 17, 2007
how to make it so if the server that hosts my website receives too much traffic it will go to a mirrored copy of my website on another server? I want to make sure that it doesn't go down in the event of a big boost in visitors.
View 5 Replies
View Related
May 25, 2007
I'm planning host multiple game servers on a single machine. I'm going to configure my own machine for this purpose. I'm uncertain on how powerful should I build my machine.
I'm going to host resource demanding games like Battlefield 2 and Armed Assault. Both of the mentioned games has a dedicated server application that requires roughly 2ghz of CPU power and 1GB to 2GB of RAM (depending on connected users) to run on.
Base on the above requirements, I'm going to put together a machine with 2 dual core Opteron or Xeon running at 2ghz and 8GB of RAM. The machine is going run 4 virtual servers with the game server application running on them. My configuration uses basic division to calculated the required CPU and RAM on my custom configured machine. Is this a practical approach?
Has anyone tried anything similar with xen? I'm worry about any performance impact that might happen due to overhead or shared cpu & ram cycle latency as game server demands real time performance.
I'm though about doing this because it's cheaper to rent a 1U rack space running 4 game servers than renting 4Us for the same purpose. Care to share experience or thoughts on this subject?
View 7 Replies
View Related
Mar 12, 2007
Is there an issuer that issues wildcard SSL certificate which can be used on multiple servers under the same domain name (like server1.domain, server2.domain, server3.domain...etc)?
View 1 Replies
View Related
Sep 19, 2007
I'm trying to figure out how I would host 20 or so websites using one static IP address and 2 servers, on a network behind a router.
I think I have edit the Apache config files, but that's driving me crazy. Is there any other easier way?
View 14 Replies
View Related
