When running yum update from ssh, I've got this error:
--> Processing Dependency: perl(String::CRC32) for package: lftp
--> Finished Dependency Resolution
Error: Missing Dependency: perl(String::CRC32) is needed by package lftp
did try to removing the lftp, then yum update running like a charm but cannot re-install it ( lftp ) again.
--> Populating transaction set with selected packages. Please wait.
---> Package cadaver.i386 0:0.22.5-1.el5.rf set to be updated
---> Package mtr.i386 2:0.72-1.el5.rf set to be updated
---> Package rsync.i386 0:3.0.2-1.el5.rf set to be updated
---> Package nmap.i386 2:4.20-1.el5.rf set to be updated
---> Package lftp.i386 0:3.7.1-1.el5.rf set to be updated
---> Package syslinux.i386 0:3.63-1.el5.rf set to be updated
---> Package dkms.noarch 0:2.0.19-2.el5.rf set to be updated
---> Package subversion.i386 0:1.4.6-0.1.el5.rf set to be updated
--> Running transaction check
--> Processing Dependency: perl(Crypt:asswdMD5) for package: syslinux
--> Finished Dependency Resolution
Error: Missing Dependency: perl(Crypt:asswdMD5) is needed by package syslinux
when I run yum update
Have a CentOS 5.3 VPS. Trying to install KDE using Yum.
Get following error:
Error: Missing Dependency: cups-libs = 1:1.3.7-8.el5 is needed by package 1:cups-1.3.7-8.el5.x86_64 (base)
I tried using Yum to install both "cups-1.3.7-8.el5" entries in the search but they are already installed.
While trying to update CentOS release 5 (Final) via yum, we are getting a missing dependency error that stops the upgrade. It seems that bind is missing.
Error: Missing Dependency: bind = 30:9.3.3-7.el5 is needed by package bind-chroot
However when we try to install bind, we get this error.
root@saturn [~]# yum install bind
Loading "installonlyn" plugin
Loading "fastestmirror" plugin
Setting up Install Process
Setting up repositories
Loading mirror speeds from cached hostfile
Reading repository metadata in from local files
Excluding Packages in global exclude list
Finished
Parsing package install arguments
Resolving Dependencies
--> Populating transaction set with selected packages. Please wait.
---> Package bind.i386 30:9.3.3-10.el5 set to be updated
--> Running transaction check
--> Processing Dependency: bind = 30:9.3.3-7.el5 for package: bind-chroot
--> Processing Dependency: bind-libs = 30:9.3.3-10.el5 for package: bind
--> Restarting Dependency Resolution with new changes.
--> Populating transaction set with selected packages. Please wait.
---> Package bind-libs.i386 30:9.3.3-10.el5 set to be updated
--> Running transaction check
--> Processing Dependency: bind = 30:9.3.3-7.el5 for package: bind-chroot
--> Processing Dependency: bind-libs = 30:9.3.3-7.el5 for package: bind-utils
--> Restarting Dependency Resolution with new changes.
--> Populating transaction set with selected packages. Please wait.
---> Package bind-utils.i386 30:9.3.3-10.el5 set to be updated
--> Running transaction check
--> Processing Dependency: bind = 30:9.3.3-7.el5 for package: bind-chroot
--> Finished Dependency Resolution
Error: Missing Dependency: bind = 30:9.3.3-7.el5 is needed by package bind-chroot
The strange thing is that Bind is running perfectly on the server.
bind-9.3.3-7.el5
ypbind-1.19-7.el5
bind-chroot-9.3.3-7.el5
bind-libs-9.3.3-7.el5
bind-utils-9.3.3-7.el5
root@saturn [~]# yum upgrade ...
I am trying to install MySQL from its RPM. I keep getting the following dependency issues and I have never seen these before. libc.so.6 is installed via glibc. I have all of the different glibc packages installed and I am lost. libc.so.6 is located in /lib/lib.so.6.
# rpm -i MySQL-server-community-5.1.34-0.rhel5.x86_64.rpm
error: Failed dependencies:
libc.so.6()(64bit) is needed by MySQL-server-community-5.1.34-0.rhel5.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by MySQL-server-community-5.1.34-0.rhel5.x86_64
libc.so.6(GLIBC_2.3)(64bit) is needed by MySQL-server-community-5.1.34-0.rhel5.x86_64
libc.so.6(GLIBC_2.3.4)(64bit) is needed by MySQL-server-community-5.1.34-0.rhel5.x86_64
libc.so.6(GLIBC_2.4)(64bit) is needed by MySQL-server-community-5.1.34-0.rhel5.x86_64
libcrypt.so.1()(64bit) is needed by MySQL-server-community-5.1.34-0.rhel5.x86_64
libcrypt.so.1(GLIBC_2.2.5)(64bit) is needed by MySQL-server-community-5.1.34-0.rhel5.x86_64
libdl.so.2()(64bit) is needed by MySQL-server-community-5.1.34-0.rhel5.x86_64
libdl.so.2(GLIBC_2.2.5)(64bit) is needed by MySQL-server-community-5.1.34-0.rhel5.x86_64
libm.so.6()(64bit) is needed by MySQL-server-community-5.1.34-0.rhel5.x86_64
libm.so.6(GLIBC_2.2.5)(64bit) is needed by MySQL-server-community-5.1.34-0.rhel5.x86_64
libnsl.so.1()(64bit) is needed by MySQL-server-community-5.1.34-0.rhel5.x86_64
libpthread.so.0()(64bit) is needed by MySQL-server-community-5.1.34-0.rhel5.x86_64
libpthread.so.0(GLIBC_2.2.5)(64bit) is needed by MySQL-server-community-5.1.34-0.rhel5.x86_64
libpthread.so.0(GLIBC_2.3.2)(64bit) is needed by MySQL-server-community-5.1.34-0.rhel5.x86_64
libpthread.so.0(GLIBC_2.3.4)(64bit) is needed by MySQL-server-community-5.1.34-0.rhel5.x86_64
After install yum on my centOS 4.4 VPS, I ran yum update and got this error:
Error: Missing Dependency: glibc-common = 2.3.4-2.25 is needed by package glibc-dummy-centos-4
When I tried to install glibc-common, I got this error:
error: Failed dependencies:
glibc-common = 2.3.4-2.25 is needed by (installed) glibc-2.3.4-2.25.i686
glibc-common = 2.3.4-2.25 is needed by (installed) glibc-dummy-centos-4-2.3.4-2.25.swsoft.i386
When trying to install these other things, I get more dependency errors. I noticed that glibc-dummy-centos-4-2.3.4-2.25.swsoft.i386 was mentioned. I'm not sure what this is, but it's by SwSoft? Is this something I have to contact my provider about? Thanks.
I have been finding MRSPUTNIK in User Agent strings hitting my Website and was wondering if anyone had any insight. I can find other incidences online, but can't figure out what it is indicating.
Has anyone else seen this?
MRSPUTNIK 2 0 0 17 HW
I'm looking for a way to add a string to the end of an url if it contains a certain string (while using a .htaccess file).
If the url contains: derp.php it will add the following to the end of the url: &code=TEST
E.g. if an url contains derp.php?blabla it will be changed to: derp.php?blabla&code=TEST
How can I accomplish this?
Is it possible to call a cron job with a query string appended to the file. I have no problem setting up crons in the cron tab..but i'd like the cron to fetch a url that looks something like
/home/php/some-file.php?a=1
is this possible directly through the cron job? I guess an alternative is call some php file that uses curl but i was wondering if there 's a direct way.
OS: Windows 2003
I want to find out a string in a folder that holds 100+ files and sub-folders.
I currently have this code in my Image Upload script which changes the file name into sets of numbers and letters
Quote:
$new_file_name = "uploads/" . md5($_FILES['selector']['name'] . time()) . "." . $extension;
How can i make it so its smaller than an md5, about 6 or 7 numbers and letters.
We have some Cisco servers that are being administrated by Affant. I recently downloaded a network management tool called SolarWinds and it looks really interesting and amazing because it can do so much for network monitoring. It seems that it needs not only the IP address for out server, but also a Community String. I tried the basic defaults (private, public) but they will not connect. I researched online and found some other defaults for a 3COM network, but none of those worked either.
I was going to try and telnet through to the server but port 23 (default telnet port) is closed. Im sure its for security purposes. I also read online that if I used a packet sniffer, I would be able to sniff out packets which hed the community string in them.
However, I could not find a sniffer which would actually do this. Any suggestions on a good packet sniffer that could do this?
Also, If the telnet port is closed, is there any other way I could telnet into the server on a different port? Or maybe use some other way to access the server?
I really want to use this program but I dont think my corperate office would like us to be monitoring it using this third party software, but us IT people dont really care...
If there is anything you can help out with, it would be most appreciated.
I have an [URL] ....
I use htaccess to rewrite it to: [URL] ...
and there is a problem, because I do not get what I need. The result is: [URL] .....
The last / sing dous not even matter, because if I write the url without the ending /, the three dots are still removed.
It looks like everywhere in the url the (in regexp) .+/ pattern is replaced with a simple / sign.
The RewriteRule is very simple, I can not imagine it has anything to do with this, but it looks this:
RewriteRule ^(.*)$ index.php?p=$1 [QSA]
I started to log the rewrite and it looks like if the specific parts of the url are replaced before the rewrite got it.
These are the first few rows of the rewrite log:
add path info postfix: E:/web/service/szerz....odes -> E:/web/service/szerz....odes/action/axgetszerzodesar/ugyfelid/46402/termekid/46032/szerzodesszam/2012.01.01/
strip per-dir prefix: E:/web/service/szerz....odes/action/axgetszerzodesar/ugyfelid/46402/termekid/46032/szerzodesszam/2012.01.01/ -> szerz....odes/action/axgetszerzodesar/ugyfelid/46402/termekid/46032/szerzodesszam/2012.01.01/
applying pattern '^(.*)$' to uri 'szerz....odes/action/axgetszerzodesar/ugyfelid/46402/termekid/46032/szerzodesszam/2012.01.01/'
webserver: Apache/2.2.22 (Win32) PHP/5.2.17
and Apache/2.2.9 (Win32) PHP/5.2.17 (I refreshed it today because of this problem)
os: win7 home premium sp1
It is tested on a linux os too, but there were no such problems.
I want to match a query string with modrewrite , the problem is that my query_string has a url as value:
%{QUERY_STRING} next=https://play.google.com/store/apps/details?pepe=1
and it doesn't work for me.
input='next=https://play.google.com/store/apps/details?pepe=1'
patttern='next=https://play.google.com/store/apps/details?pepe=1' => not-matched
but if I had to match only the uri , it works , the problem is when I try to add parameters to the query_string url:
http://someurl.com?next=https://play.google.com/store/apps/details?pepe=1
Is there any way to match that kind of query_string?
I need to do this:
(1) domain1.com limit to 10 connections per IP per 30 seconds but allow if accessing file beginning with x.php such as x.php?981 x.php?o19
(2) domain2.com limit to 10 connections per IP per 30 seconds only if accessing file beginning with x.php but allow if accessing file beginning with y.php y.php?981 y.php?o19 .....
I've migrated from Apache 2.2 to Apache 2.4 few days ago. It is installed as a service on my Windows 7 developer machine and works in bundle with PHP 5.6.2.
Today I've discovered that GET parameters with Cyrillic characters in URL string are empty.
For example URL looks like this: site.com/search.php?q=%C8%E2%E0%ED%EE%E2
URL-encoded string here is Иванов (%C8%E2%E0%ED%EE%E2)
When I try to use this GET parameter in my PHP script - the variable $_GET['q'] is empty. If I put latin characters in this parameter - $_GET['q'] is taking the corresponding value.
Doesn't look like it's a problem of PHP as I think. Otherwise at least something should stay in the variable. And also I would like to add that this was working absolutely normal on Apache 2.2.
I don't know how to block a specific QUERY STRING url via .htaccess file, well actually I want to block this type of url :
test.php?q=RANDOMTEXT=&tl=The%20path%20ends
I am using connection string that written below but it does not work in your host.
<add name="LocalSqlServer" connectionString="Data Source=mssql.mydomain.at; Initial Catalog= mydb; User ID= myuserid; Password= mypassword; MultipleActiveResultSets=True;"/>
Any connection string instance for mssql webadmin ?
I recently upgraded from Plesk 11.5 to 12.0. I also just got an extra IPv4-address for my server (provider is Strato), unfortunately I have some problems with adding it to Plesk.
The IP should be assigned automatically through DHCP, but when I did a Reread IP in Plesk, nothing happened. I tried to manually add the IP, but then Plesk manually configured it and I lost the IPv4-connectivity (IPv6 kept working though).
Now when I want to remove the IP, I get the following error:
Is this a bug or a problem with my specific configuration?
I installed Plesk 12 on server, and deployed several websites.
If I tried to open ASP.NET Settings on websites & domains of any domain, I've got error:
Internal error: aspnetcfg failed: Version string portion was too short or too long. (Error code 1)
Message aspnetcfg failed: Version string portion was too short or too long. (Error code 1)
File Agent.php
Line 243
Type PleskUtilException
How can I fix this?
Every day we get a couple off Parallels.Diagnostics.RRD.RrdStorageProvider errors:
Parallels.Diagnostics.RRD.RrdStorageProvider - <log4net.Error>Exception during StringFormat: Input string was not in a correct format. <format>Update to database {0} has failed [{2:HH:mm:ss:ffff}]. {1}</format><args>{cpu-1.rrd, Parallels.Diagnostics.RRD.RrdException: Failed to update RRD database "C:Program Files (x86)ParallelsPleskvarhealthdatalocalhostcpu-1.rrd":ERROR: could not lock RRD
, 00:00:09.6084608}</args></log4net.Error>
Source: ParallelsHealthMonitor
We are running a Windows 2008 R2 Enterprise server with the latest Plesk 11.5.30 update 16.
I am wanting to backup my VPS, though the backup manager requires me to enter something for "Backup File Initial String". It is shown in ....
View 2 Replies View RelatedI want to permanent redirect some .html page from subdomain to main domain WordPress page,Redirect permanent /cat/FSBO76.URL....
View 1 Replies View RelatedWhen i was running top -cd2 command following scripts are taking high cup uses on server. But when we are go home directory we didn't find any thing.
24489 "User Name" 20 0 6732 5084 1164 S 8.0 0.2 11:00.69 /usr/bin/perl -w hnc.cgi
26456 "User Name" 20 0 6876 5080 1164 S 8.0 0.2 7:23.47 /usr/bin/perl -w hnc.cgi
32569 "User Name" 20 0 6748 5056 1164 S 7.5 0.2 8:57.30 /usr/bin/perl -w hnc.cgi
update us why this script are running under some particular users and what the application of this script.
I have a website is written by Perl language. I donnt know how to run it.
I installed Activeperl 5.0 and IIS is running. I have heared someone who told me that need to install a software as Emperl/ html-emperl, is it right?