I am trying to install some packages on my system and sometimes they depend on different, sometimes earlier, sometimes later versions of library packages on my system.
In that situation is it better to get the source for the package and recompile it with what you have on your system?
I am assuming that the dependent libraries the packages where compiled with were what was available on the package developer's system and do not necessarily contain new features lacking in the older versions.
Will recompling such packages from the source rpms fix the problems in most cases?
One particular group I persistently come across is the libcX.so libraries.
I have a dedicated server and it works very well to all my sites and my scripts until 2 weeks ago, I start getting errors from my sites the following error message php_network_getaddresses: getaddrinfo failed: Temporary failure in name resolution
I thought this is a temporary error only when I first encounter it, but its been 2 weeks now and still the problem is continuesly showing.
The problem cause my 2 sites being penalized from google search engine because of this problem.
My server have been hacked by a user that have the nick of aftehner
excatly what he does is enter and execute a command by a php script that execute a command in shell that delete all the files that have in their name index or main, so he destruy alot of information.
My question is how can i reinstall everything in a remote server, I already try to reinstall cpanel, apache (but it doesnt work with the cpanel version so i try it to install a standalone but it only shows 1 page for all domains hosted)
I dont know what can i do, It delete alot of information and replace with a file of hacked by aftehner or something like that.
Yum is doesnt work correctly, i already try to reinstall python, perl, php, but i still having problems. I have been working all the day until 4 am for 3 days trying to fix it, I already know how he make the attack and i have all the log i can share this information with you for not have this problem.
What do you reccommend to do for solve this problem?
Server Linux Fedora Athlon XP 3800+ 1 gb RAM Data center: Layered tech CPANEL / WHM
A domain hosted in it: Mindev.com They hacked the website by the domain: Lodice.com
how it's possible to solve this problem: My domain name has an e-mail address that is being forged and used by a spammer, and I get an incredible amount of bounced emails to the point to bring down a Dual-Xeon with 4GB of RAM. This e-mail account has been discontinued and e-mail sent to non-existent accounts is set to be thrown away. The average server load goes through the roof in a few seconds as soon as I point the MX entries to the server. I don't have the money to set up a load-balanced system. What could I do to host this domain name and use e-mail, only allowing emails to existing email accounts?
I upgrade my 1and1 server and I need some help here. I need to install Latex, I downloaded the RPM and it has many dependencies. Once I install a dependancy it asks for more dependencies... What is the easiest way to install an RPM and all its dependencies.
there are some iframe tag simlilar to this in all index files
<iframe src="http://traff<<removed>>.cn/in.cgi?27" width=100 height=80></iframe> any idea how might this iframe inserted in my codes.
i have tried to format my systems and remove all saved ftp passwords , but still this virus is comming back and the strange thing is i have website on different servers infected with same virus any idea how this is happened and how to avoide this?
My ISP gave me the box with /usr allocated only 8G, now is 6G used. I suppose that Cpanel will take space when I create email accounts, forwarders, maybe other stuff too.
I'm not sure I really understand the ins and outs of upgrading MySQL and I'm afraid to mess it up. From the MySQL site I see there's a 4.1.22 RPM available [url] and I'm running 4.0.18 (Your MySQL connection id is 2763253 to server version: 4.0.18-Max-log)
I'm not sure I want to bump it up all the way to 5, but I would like to run 4.1, but I also would like to stick with the RPMS, even after reading whatever I can find, I'm still not sure I understand what RPMs to install, here's what I have currently.
I installed Joomla today, and it went smoothly except that under Help -> System Info in the Joomla admin panel, all "Directory Permissions" are "Unwritable."
I've read up on various solutions, such as installing suphp to take care of user permissions. But if I have my own Linux VPS and I am the only user (i.e. noone else has accounts on my VPS), what is the easiest way to fix this issue? Can I just CHMOD those directories to 777 without worrying about causing a security issue? Or is there a similarly easy solution for someone like me with very basic Linux knowledge?
This is a bit off topic but I am looking for a person kind enough to test install a few RPM packages on an AMD 64 bit system with a 64 bit OS (Fedora or otherwise), preferably an Opteron but not required. The RPMs in question are IBM's DaCS which is something designed for a supercomputer yet to be created. We have one part of the DaCS model but oddly enough, we don't have any AMD systems (tons of high end Intels however).
On Intel machines, after installing these RPMs, the binary that is to be run (/usr/sbin/hdacsd) fails with a "Floating point exception" so I'd like to find out if this is an issue caused by a 3DNow optimizations to these RPM binaries (Intel does not support 3DNow) or something else.
I've put up the RPMs at [url] and the main one to be installed is dacs-hybrid-3.0.0-7.x86_64.rpm
After installation, run hdacsd (possibly in /usr/sbin) and tell me if you get the floating point exception.
We've had a VPS for just over a month now. I am not going to mention the host by name (yet) but they advertise here and other people here reported liking them.
Sadly it's not my experience and I regret my purchase.
Every morning for the past few weeks, we get load spikes every 30 minutes that make our site unusable for a minute (on our VPS, any load over 1.0 is sluggish, over 2.0 is virtually unusable, over 3 is unresponsive)
Here's a series of days as an example: [url]
The worst part about this is the host insists 1. either it's not happening or 2. they can't find it
I know it's happening because when I try to load a page on the half-hour, it takes over 13 seconds (less than 1 second normally). And it's fairly obvious it's someone doing a cron job with some nasty downloading, uploading, or maybe a massive mysql update.
Someone tell me what to tell them because this is driving me out of my mind. The load is NOT being caused by ourselves, I've made sure all our cron jobs don't happen on the exact half hour and we get lots of traffic later in the day without loads.
Last night the plesk auto updater ran an update. And i was wondering if others have had the same issue?
CentOS6, RHEL5 x64 Plesk 12 Unlimited
Detecting installed product components. Gathering information about installed license key... Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile
[Code] .....
ERROR: The Yum utility failed to install the required packages. Attention! Your software might be inoperable. Please, contact product technical support.Click to expand...
---> Downloading header for syslinux to pack into transaction set. [url] : [Errno 14] HTTP Error 404: Not Found Trying other mirror. [url]: [Errno 14] HTTP Error 404: Not Found Trying other mirror. [url]: [Errno 14] HTTP Error 404: Not Found Trying other mirror. [url]: [Errno 14] HTTP Error 404: Not Found Trying other mirror. Error: failure: RPMS/syslinux-3.62-1.el5.rf.i386.rpm from rpmforge: [Errno 256] No more mirrors to try.
I noticed when installing latest version of APF 0.9.6.3 over the previous version 0.9.6.2 it will import all the variable and ports settings from conf.apf and allow_hosts.rules files of the previous version. so there will be no need to edit or configure any thing any more when upgrading APF exept setting DEVEL_MODE to 0 and restart APF.
I have just started joining these type of forums because im planning to set up another web site and i guess that it would really help if i enter these forums to have a better judgement and make the best choice. Ive had my other hostings from go daddy and midphase but i wasnt relly happy with the results and the downtime... ive read some forums about globat, if im not mistaken my web developer has made me a website from globat for almost a year and we had minor problems.
I'm considering switching hosting to NameCheap to save some money over my current hosting plan. I've never had a problem with their registrar service. I did a search for reviews on their hosting service. There were some negative ones a few years back when they were selling PeopleHost hosting, but they apparently have their own hosting now.
I found a few posts with issues, but there always has to be a few. However, if 3 of 10 customers have problems, it's a lot different than if 3 of 10,000 customers have problems. Anyone have an idea of how many sites they host?
Also, what's the latest word from people using their hosting services? Any good? How about response time and up time?
SecurityMetrics has determined that we are not COMPLIANT with the PCI scan validation requirement for our server.
The remote host is running a version of the Exim MTA which is vulnerable to several remote buffer overflows. Specifically, if either 'headers_check_syntax' or 'sender_verify = true' is in the exim.conf file, then a remote attacker may be able to execute a classic stack- based overflow and gain inappropriate access to the machine. *** If you are running checks with safe_checks enabled, this may be a false positive as only banners were used to assess the risk! *** It is known that Exim 3.35 and 4.32 are vulnerable. Solution: Upgrade to Exim latest version Risk Factor: High
HOW DO i Upgrade to Exim latest version? I am on WHM/Cpanel 11 (centos 5) I never did this before.
Is it safe to upgrade to the latest Linux kernel version 2.6.19.2 (released on January 10th, 2007) ? Is there any reported problems or have anyone faced issues after upgrading?
I'm desperately trying to find a hosting service that offers Linux hosting with latest versions of php (5.2.x), mySQL (5.1) and maybe CVS or SVN?
Space or bandwidth are not an issue (500mb space will be more than I'll ever need)
This will mainly will be a development/testing place. I really need a host that actually updates to latest versions of php/mysql/apache. (not the next day the upgrade is out but some time soon at least >_<)
Things like CVS / SVN, SSH access and access to change your own php.ini settings are more than welcome but I could live without.
I have Parallels Plesk Control Panel installed on Windows Server 2008 with PHP 5.2.17. In order to install moodle, it requires PHP 5.4.4 installed. How do I upgrade to the latest PHP or to version 5.4.4, are there any standard instructions?
