Configuration For Backup In PLESK
Jun 17, 2008How can I set the configuration for get backup every night like cPanel (daily, weekly, monthly) in PLESK?
View 13 Replies
ADVERTISEMENT
Plesk 12.x / Linux :: Configuration Of FTPS With TLS And FTP Backup Repository
Mar 8, 2015Plesk Panel 12 uses a proftpd FTP server, with the TLS module pre-installed and configured.
Many questions and/or problems arise when trying to connect to the FTP server over a FTPS connection. In (almost) all cases, the disability to connect with FTPS is due to
a) the lack of configuration of passive ports, AND
b) firewall settings, enabling connections through before mentioned passive ports.
The passive port range can be configured by
adding a line to /etc/proftpd.conf, stating: "PassivePorts <start> <end>", OR
adding a separate file with name <filename>.conf to /etc/proftpd.d/, with the contents of <filename>.conf stating: "PassivePorts <start> <end>"
And note that
- <start> is the first port of the port range, in theory any value above 1050 can suffice,
- <end> is the last port of the port range, any value below 65000 (!) can suffice,
- the extension .conf is required when using a separate config file,
- the directory location /etc/proftpd.d/ is required when using a separate config file,
- one should always limit the port range, i.e. it is not desirable to open up a lot of ports,
- it is desirable to have the <start> value above 20000, in order to prevent conflicts with other programs, using a specific port (for instance, port 8443 is also being used),
- it is not necessary to restart proftpd after configuring the passive ports.
The firewall settings have to be changed to allow connections through the passive ports that have been opened for FTPS connections and note that
- only open up the port range (not more) in the firewall settings,
- it is only necessary to open up ports in the firewall settings of the FTP server,
- it is not required to open up ports in the firewall settings of the sending server.
Many issues have been arising when setting up the FTP Backup Repository.
In general, the passive mode checkbox has to be selected, when encountering issues.
The explicit use of the passive mode allows for proper configuration of the FTP Backup Repository and note that it does not matter whether FTPS or normal FTP will be used.
Plesk 12.x / Linux :: Backup Of Whole Server - Restoring Domain And Configuration?
Feb 21, 2015I update the backup of whole server (the file is .xml.tar)
Now how can I restore all my domains, server.configuration and so on?
Cpanel Backup Configuration
Mar 27, 2008I'm running low on space ever since switching to incremental backup. I don't want to switch back to the full backups because the gzip was killing the server for an hour every night...
I have the following setting turned on:
Backup SQL Databases : "Per Account and Entire MySQL Directory"
Will I get a full backup if I just do "Per Account" or am I missing something if I set it that way?
I have some extra space on The Planet's NAS backup at /mnt/backup but not enough for the full backup. If I could split the backup in two that could work as well.
Plesk 11.x / Linux :: Download Backup To Local Computer From Backup Manager
May 17, 2015I have multiple backups stored under server repository (subscriptions --> <domainname> --> website and domains --> backup manager).
The physical files are located at: /var/lib/psa/dumps/clients/904279/domains/<domainname>/
When I click the green arrow to download these files to a local computer (see attached image) I get a new page with title "Download the backup file". On this page I have the option to set a password on the downloaded file, but no matter what I do (password or no password) the file is not downloaded to my local PC. I don't get a pop-up box with the option to save the file. Just nothing happens ...
Plesk 12.x / Linux :: Backup And Quota - Limit Number Of Cores Backup Zipping Tool Uses?
Aug 15, 2014I have 2 problems:
Firstly I wonder if there is any possibility to limit the number of cores the plesk backup zipping tool uses? This pigz takes up all my CPU. Is there any way I can reduce the amount of cores it uses because all my websites are down every time a backup takes place for around 3 minutes.
Secondly I get the following in my syslog:
1 baby plesk sendmail[20189]: Error during 'check-quota' handler
I don't know what is wrong. I think it's since the upgrade to Plesk 12. I now have 12.0.18 Update #13.
Plesk 12.x / Linux :: 413 Request Entity Too Large - Can't Upload Backup Files With Backup Manager
Sep 17, 2014I have a 6GB backup file created with another Plesk Backup Manager, now I trying to upload this backup file to my Plesk Backup Manager but after upload 3% I am getting "413 Request Entity Too Large" error, I tried with disable NGINX but still getting this error.
how can I resolve this error or is their any other way to upload my file on backup manager?
I see that Backup Manager have a file size restriction of 2GB how can I increase this?
Plesk 12.x / Linux :: How To Include More Directories In Backup With Backup Manager
Feb 11, 2015I have an Ubuntu 14.04 LTS 64 bit virtual private server with Plesk 12. The server is hired from a hosting provider. The server is used to run the Odoo ERP application (using postgres database).
The Odoo application is running fine and now I want to create a backup of the application using Plesks Backup manager.
I choose configurations and content option in the backup manager but the created backup is only 200kb.
I think the problem is the location where the Odoo application is installed is not included in the backup. I made a tar backup from the server and extracted it on my pc. It seems that the main parts of the Odoo application are in the var, opt, etc and usr directories (not in a domain but under root).
Installing the application in a domain would solve the Plesk backup issue I think but the installation script of Odoo puts Odoo in var, opt, etc and usr directories even if I put the install script in the directory of a created domain. Since the manual Odoo installation is complicated I am very happy to use the script.
My questions are:
1. Is it possible to include the directories var, opt, etc and usr in the Plesk backup and how and where do I do that?
2. Can I restore such a backup without no problem in Plesk?
Plesk Email Configuration
Oct 15, 2009Does anyone know of a plesk addon that will allow for easy configuration of various mail applications, sorta like cPanel's auto configure option.
View 2 Replies View RelatedPhpmyadmin Configuration In Plesk
Jun 22, 2008How can I configure the phpmyadmin in plesk to show databases?
because when my customers trying to access to phpmyadmin show access denied.
Plesk 12.x / Windows :: DNS And SOA Records Configuration?
Mar 8, 2015I have installed Parallels Plesk 12.0.18 installed on my Windows Server. I have found issues with my DNS and SOA records having issues it says I have not configured my DNS and SOA records when I do a DNS diagnosis.
setup my configure the records for me correctly so that my domains issues could be solved. You can see a link below to know the errors I have for my domain name. I have hosted multiple domain names on the same server with Plesk.
[URL]
Plesk 11.x / Linux :: PHP FastCGI Configuration File?
Oct 24, 2014Where the file that holds PHP fastcgi configuration is located. I was told its here but it's not
/etc/nginx/conf.d/*.conf.
Changing LimitRequestLine In Plesk Apache Configuration
May 16, 2014I have to modify the two apache settings LimitRequestLine and LimitRequestFieldSize. Strangely, the setting has to be made to the first VirtualHost that gets loaded and it will then be changed for all virtual hosts. I don't understand why that's the case, but I was able to verify it works on a local test server.
But how do I find out which virtual host is loaded first? I tried with default of course, but that one isn't it.
Or how to make the setting to apache?
I run Plesk Panel 11.5 on Debian 7
Plesk 11.x / Linux :: Built-in FTP Server Configuration
Aug 9, 2012I just installed Plesk 11.0.9 Update #8 on a CentOS Linux Server and found a new FTP-server running and listening on port 21. I wanted to deactivate it or at least change the port number to anything else. But in the config file /etc/xinetd.d/ftp_psa there is a comment:
#DO NOT MODIFY THIS FILE BECAUSE IT WAS GENERATED AUTOMATICALLY,
#SO ALL YOUR CHANGES WILL BE LOST AFTER YOU UPGRADE PARALLELS PLESK PANEL.
So I can't deactivate the FTP-server with the line "disable = yes" because the default file is restored after a while (I can't pinpoint the event when it happened). In the Plesk frontend I can't see any possibility to deactivate the server or change the port.
In the file above, there is mentioned another config file "server_args = -c /etc/proftpd.conf" but changes in that file are ignored for whatever reason. There I changed the port number but without success. It's still listening on 21 even if the file says otherwise.
Plesk 12.x / Linux :: Reset Postfix Configuration?
Apr 23, 2015Reset postfix configuration in plesk 12? I have some misconfiguration on smtp banner and hostname so I prefer to reset all.
View 6 Replies View RelatedPlesk 12.x / Linux :: CORS Configuration For CDN With NGINX
Jul 16, 2014Trying to enable CORS (cross-origin resource sharing)? I've tried just about everything with the NGINX conf files and individual conf files, but nothing seems to be working...
View 1 Replies View RelatedPlesk 12.x / Linux :: Configuration File Error
Jun 25, 2015PRODUCT, VERSION, OPERATING SYSTEM, ARCHITECTURE
Parallels Plesk Panel 12.0.18 MU #51 CentOS 6.6 (Final)
PROBLEM DESCRIPTION
The following error has started to appear on our server: New configuration files for the Apache web server were not created due to the errors in configuration templates: Template processing failed: file = /usr/local/psa/admin/conf/templates/default/nginxDomainVhost.php, error = Template_Exception: Empty content was provided for config file /var/www/vhosts/system/domain/conf/nginx.conf file: /usr/local/psa/admin/plib/Template/Writer/Webserver/Abstract.php line: 47 code: 0. Detailed error descriptions were sent to you by email. Please resolve the issues and click here to generate broken configuration files once again or here to generate all configuration files.
STEPS TO REPRODUCE
Appears on the plesk home page
ACTUAL RESULT
Error displaying as above
EXPECTED RESULT
No error should be displaying, I haven't seen this before and we didn't receive an email with error descriptions. Is it safe to regenerate the broken config files / all of them? t
Plesk 12.x / Linux :: ImageMagick Configuration On Multi PHP
Mar 25, 2015I installed another php version a while ago. Today I am trying to add ImageMagick to this php version but after launching the following command
Code:
./configure '--with-libdir=lib64' '--cache-file=../config.cache' '--prefix=/usr/local/php-5.6.5' '--with-config-file-path=/usr/local/php-5.6.5/etc' '--disable-debug' '--with-pic' '--disable-rpath' '--enable-fastcgi' '--with-bz2' '--with-curl' '--with-freetype-dir=/usr/local/php-5.6.5' '--with-png-dir=/usr/local/php-5.6.5' '--enable-gd-native-ttf'
[Code] ....
It sends me back this error configure:
Code:
WARNING: unrecognized options: --enable-fastcgi, --enable-imagick
Plesk 11.x / Windows :: Horde Localhost Configuration
Apr 2, 2014In horde how we can configure that it will send email using the logged in user login to authenticate and send the email, currently it using localhost to send the emails.
View 1 Replies View RelatedPlesk 12.x / Windows :: Add Existing MailEnable Mailbox To Configuration
Mar 8, 2015Plesk Windows 12, MailEnable mailserver
I added users directly to mailenable (using their migration utility to import from an old mail server which plesk does not support). The domains exist in plesk but not the individual email users/mailboxes.
Now I want to add those email users to plesk but it doesn't let (not surprisingly), when I try to add a user it returns an error: "Unable to update the mail account properties:mailmng failed: MEAOPO.Mailbox.AddMailbox failed"
My question is: How can I add the users that already exist in MailEnable to the plesk configuration? (i.e. ignore the error and add the user to the plesk database, or even better yet if plesk can read the configuration and add all users)
Tthe plesk kb articles suggest running mchk.exe but that is designed to take users from plesk and add them to mailenable, I need the reverse).
Plesk 12.x / Linux :: Adding SPDY Under All Nginx Configuration
Dec 27, 2014I would like to add spdy under all nginx configuration as below
listen 443 ssl spdy;
How to add them globally ?
Plesk 11.x / Linux :: Error When Changing Nginx Configuration
Jun 5, 2014I have following problem when I try to cange the configuration file for Nginx in Plesk.
Details:
- Using Wordpress
- vServer
- PHP is handled through Nginx
- Memcached is enabled
To use the caching plugin "Cachify" in combination with memcached, the nginx configuration file must be edited. Following config should be used:
Code:
## GZIP
gzip_static on;
## CHARSET
charset utf-8;
## INDEX LOCATION
location / {
error_page 405 = @nocache;
[Code] ....
When I try to save the new config, following error appears:
Invalid nginx configuration: nginx: [emerg] duplicate location "/" in /var/www/vhosts/systemmydomain/conf/vhost_nginx.conf:8 nginx: configuration file /etc/nginx/nginx.conf test failed
How can I use the necessary configuration? I used google before, but some people said, that the server templated needs to be edited?
Plesk 12.x / Linux :: Migration Between Servers - Error With DNS Configuration
Feb 18, 2015Yesterday I migrated a domain with the migration tool from a Debian 7.6 Plesk 12.0.18 MU35 box to a Debian 7.6 Plesk 12.0.18 MU35 box
This domain have a simple DNS configuration. The A registry for the domain.com was an own IP instead the IP of the server. Rest of the DNS configuration was the same.
After migration the A registry for the domain.com was an own IP too (as expected) but also the A registry for mail.domain.com
Before migration, in the old server:
A domain.com x.x.x.x (own ip)
A mail.domain.com y.y.y.y (server ip)
After migration, in the new server:
A domain.com x.x.x.x
A mail.domain.com x.x.x.x
The migration had changed the IP for mail.domain.com for the IP of the A registry for domain.com
Very strange. I double-checked it (as the domain in the "old" server was suspended)
Client don´t have access to the control panel, so no changes done.